Does SRP series routers support VRRP?

Hi,
can somebody check if SRP routers support VRRP or HSRP? In documentation isn't this capability mentioned. I need make a backup to my main IOS based router.
Regards, Martin

Hi,
the console port indeed does not support RS232 modem control (data set ready/Data Carrier Detect (DSR/DCD), data terminal ready (DTR)). However, you cannot change the settings on the console port. You need to configure your modem to to ignore DTR and assert autoanswer. The associated Hayes-compatible commands are AT&D0 and ATS0=1, respectively.
Regards,
Nethelper

Similar Messages

  • Does rcapi on 800 series routers support CAPI version 2.0?

    Does rcapi on 800 series routers support CAPI version 2.0? In that case: Is a certain IOS release mandantory?
    Best Regards,
    Martin Funke
    K&K networks

    Does rcapi on 800 series routers support CAPI version 2.0? In that case: Is a certain IOS release mandantory?
    Best Regards,
    Martin Funke
    K&K networks

  • Which E series routers support the Wireless_Advanced.asp hidden page?

    I know the E2500 and the E4200 support the http://192.168.1.1/Wireless_Advanced.asp settings but what other E series routers support this hidden page where you can set Beacon Interval, RTS and Fragmentation thresholds?

    I own the E3000 v1 and it has this feature so I presume that the E1000 & E2000 have this feature. You say that E2500 & the E4200 have the feature.  I presume that the E1200 v1 to E4200 v1 have the feature while E1200 v2 to E4200 do not have the feature. See new userguide for E1200 to E4200.
    Greetings from Northern Ontario, Canada

  • Does the 76xx routers supports EoMPLS without SIP installed?

    Dear Sir!
    Can you tell to me, does the 7600 series of routers supports EoMPLS without shared port adapters (SPAs) and SPA interface processors (SIPs)?
    I.e. if we have 7606S-RSP720C-R, WS-X6704-10GE ports connected to backbone and
    WS-X6408A-GBIC with WS-X6148A-GE-TX ports connected to our DataCenter
    (without any SIPs and SPAs installed on board).
    Can we make EoMPLS for such clients, which are should connected
    to our DataCenter through remote CAT3750-METRO?
    Best regards,
    Maxim

    Hello,
    There are generally two modes of EoMPLS:
    (1) PFC Based MPLS and related applications
    mode
    (2) WAN Based MPLS (SIP/SPA/OSM/ES20) and related applications mode
    (1) Is only dependent on which Sup do you have
    and generally works with most of the Ethernet (LAN) ports... If you have PFC-3B or later along with Sup-720, Sup-32 (which is PFC-3B) you can do it.
    (1) Has some disadvantages - for example you cannot having L2 switching AND MPLS EoMPLS...
    I.e. if you want to do local switching on Vlan 200 and part of the traffic to be switched part of the traffic to be EoMPLS you cannot do it without SIP/SPA/OSM/ES20
    (2) In this case you need to check very well what you're looking for. These are expensive and they support MPLS and its Applications and even support VPLS, which is not possible with (1)....
    I hope this answer your quesiton...

  • Does 1900 series router supports voice functon?

                       I have seen that 1921 and 1941 can insert a vwic3 interface card,but i cannot see pvdm on 1921&1941,my question is that how 1921&1941 support voice function(e.g voice termination)?

    Hi.
    Based on these docs, it does not support voice
    http://www.cisco.com/en/US/products/ps10538/prod_series_comparison.html
    http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps7290/ps10589/data_sheet_c78-598389.html
    VWIC3 cards are not only for voice, that's why you can add them to a 1900 series router.
    http://www.cisco.com/en/US/prod/collateral/routers/ps5855/data_sheet_c36-609138.html
    HTH
    Regards
    Carlo
    Sent from Cisco Technical Support iPhone App

  • Just like HP servers, does Cisco UCS C-Series Standalone supports Network Fault Tolerance ?

    Just like HP servers, does Cisco UCS C-Series Standalone supports Network Fault Tolerance ? if yes then, where can i find this option
    Windows :- 2k8 R2

    Just like HP servers, does Cisco UCS C-Series Standalone supports Network Fault Tolerance ? if yes then, where can i find this option
    Windows :- 2k8 R2

  • Does the UCS C-Series Servers supports PCI/e card digium T1/E1

    Hello,
    Does the UCS C-Series Servers supports/compatible with PCI/e card digium  TE407P/TE420 T1/E1.?
    The server will be used as Asterisk server.
    Thanks
    Philip

    Hi Philip,
    Compatibility will depend on the server model that you have and whether the digium card is a full length, low profile, or half length pcie card.  Take a look at http://www.cisco.com/en/US/products/ps10493/prod_models_comparison.html#~tab-a for details.  If there are any issues with the card itself once it is installed it will have to go through the 3rd party manufacturer.

  • Does the SONY VAIO F Series SVF15412CXB support dual channel memory?

    Does the SONY VAIO F Series SVF15412CXB support dual channel memory?  Or does it only have one slot?
    I'm curious if I can put a second stick of RAM in there for dual channel performance.

    Hi Mark, Thanks for the response.  Can you please double check that for me, or post a link to the documentation where you saw that?  I asked this question on Newegg, too, and one of the respondants heard differently:
    "i found out from sony that there is only 1 slot cause i was gonna get 1 more 4GB stick of ram for 8Gb. So iwas upset about that cause i have to get 8GB now and it costs 100$ for an 8Gb stick of ram on ebay. So this ram is expensive. So im sticking with 4Gb for now. This is a very good laptop though. I use it primarily for minecarft and steam and i get around 100 fps on minecraft so its good. I hope this helps." It's just confusing because other laptop advertisments I've seen openly stated how many RAM slots the computer had and how many were used upon purchase.  I haven't found anything like that which makes me think that there's only one slot for RAM. Thanks,Gremark

  • Does K8D Master-FT support Dual core Opteron?

    Hi,
    Does K8D Master-FT support dual core Opteron? I saw the latest BIOS was released at 2003/12/11 and said to support for all series of AMD Opteron(up to 248, SC, 2.2GHz/1M).
    Thx, Xuekun

    Sorry I only looked after his question.
    The entire K8D-Master3 series has support for it: >>Link<<

  • HT1595 Cisco's RV Series Routers as guest with apple tv?

    Im on a Cisco’s RV Series Routers as guest and it connects with my new apple tv but I cant download content from the net. As a guest you dont need a password to connect however if you open a webbrowser it then asks for a password. As apple tv doesn't have a browser there must be a work around.

    It isn't connecting to the network as it requires password via the webpage. As you are aware the Apple TV doesn't support this method since there isn't a browser on the device. There is no workaround.

  • Can I terminate 40 Mbps DSL BROAD BAND connection in Cisco 800 series routers

    Dear all,
     Can I terminate 40 Mbps DSL BROAD BAND connection in Cisco 800 series router?.It is not a leased line.
    Which Router model is best for 40 Mbps DSL Broad band termination ?
    Thanks&Regards
    Ajay Jose K

    Hi , 
     Below link provides you all model in 800 series . 
    http://www.cisco.com/c/en/us/support/routers/800-series-routers/tsd-products-support-series-home.html
    For your requirement below model should suffice . 
    Complete throughput from the router is 51 Mbps .
    Cisco C891FW Integrated Services Router
    HTH
    Sandy

  • Does Huawei router NE40 support Class-Based QoS?

    As I know Class-based QoS defines traffic classifiers based on certain rules and associates traffic classifiers with certain traffic behaviors, forming certain traffic policies. After
    these policies are applied to interfaces, class-based traffic policing, traffic shaping, congestion management, and precedence re-marking are implemented.
    Does Huawei router NE40 support Class-Based QoS？

     The NE80E/40E supports DiffServ and provides standard forwarding services such as EF and AF for users by using the following traffic management measures:
    1 Traffic classification
    2 Traffic policing
    3 Traffic shaping
    4 Congestion avoidance
    QoS of the NE80E/40E supports traffic policy with the above measures and mapping between the QoS fields in the IP header and the MPLS header.
    And more information about router NE40, please visit:
     http://www.huanetwork.com/huawei-router-ne40e-series-price_c89

  • MIB Required for Bandwidth Monitoring on Cisco 3800 and 3900 series Routers

    Hi Team,
    Need your help here.
    I am planning to do Bandwidth Monitoring on Cisco 3800 and 3900 series Routers. I want to know the exact MIB which I need to use for getting this done.
    Thanks,
    Karthik Anbumani

    Matt, based on feature navigator GLBP is supportted on 3800 series.
    Go to this link and search by feature (GLBP)
    http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
    HTH
    Jorge

  • New Firmware (v2.2.0.7) Released for SA520 SA520W SA540 SA500 Series Routers

    Cisco has released new firmware for the SA500 Series routers.  It's version 2.2.0.7 and can be downloaded here:
    http://software.cisco.com/download/navigator.html?mdfid=282414017&i=rm
    We have been running on this version on our SA540 for months.  Other than some changes to logging that we don't particularly like, it has been a very stable release for us although 2.1.71 was extremely stable in our environment as well.
    Our environment:
    SA540 (gateway router)
    three Linksys E4200 v1 routers (configured in "bridge mode" which turns the devices into WAP's)
    Netgear GS724Tv3 switch (with two ports in LACP link aggregation mode which are used by our Synology NAS)
    Synology DS1812+ NAS (in link aggregation mode)
    Several 5- and 9-port unmanaged switches
    Several Windows machines (PC's, servers, laptops) of many flavors
    Several MAC laptops of many flavors connected via wired and wireless
    Several tablets (iPads, Kindles, Touchpads, Xooms, etc.) of many flavors connected via wireless
    Several smartphones (iPhones, etc.) of many flavors connected via wireless
    At any one time we have ~75 active devices on our network of which ~25 are wireless.  Max ~100 devices.
    We utilize IPS and ProtectLink. We do not take advantage the ProtectLink email protection or license the ProtectLink Endpoint functionality.
    BTW, our cable modem is directly connected to our SA540.  Our SA540 is directly connected to our Netgear switch.  Nothing else is connected to our SA540.  Our Netgear switch, and to a small part our numerous unmanaged switches, do all of the heavy lifting.
    Our SA540 and Netgear switch handle all of the traffic with ease, but we are a relatively small shop.

    Hi Curtis
    Thanks for posting in our forum
    We appreciate your comments about our products, I would add that if you want to see the release note of this new firmware release, you can see it  in the following link.
    http://www.cisco.com/en/US/docs/security/multi_function_security/multi_function_security_appliance/sa_500/release/sa500_rn_2-2-0-7.pdf
    You can also be interested to see our new security devices , the  “ISA500” series.
    http://www.cisco.com/en/US/partner/prod/collateral/vpndevc/ps11850/ps11752/data_sheet_c78-717565.html
    Greetings
    Johnnatan Rodríguez Miranda
    Cisco Network Support Engineer

  • Does ImageRunner Advance C5051 Support TLS Encryption?

    Does ImageRunner Advance C5051 Support TLS Encryption? I need to scan to email using the C5051 in conjunction with Office 365. I know what settings go where, but I can't seem to find Any documentation that says "Supports TLS" , and I have gone through the actual manual, among other things. Thanks.

    Hi, EbolaSandwich! Thanks for posting!
    While our forum community members are welcome to chime in, Canon does not provide direct support for imageRUNNER series products. Instead, your dealer will be able to help you! If you don't have a dealer, please call us at 1-800-OK-CANON (1-800-652-2666) and we will be happy to provide you with the names of dealers in your area!
    We hope this helps!

Maybe you are looking for