Does SSO2 provide SSO Support for SAP BOBI 4.x Applications?

I could not find any referrence in SAP BI BI 4.x documentation for SSO where this SSO2 would be mentioned!
- Wobi

Hi,
Does SSO2 provide SSO Support for SAP BOBI 4.x Applications?
BOBJ == SAP BusinessObjects Business Intelligence platform?
SSO2 == SAP Single Sign-On?
If yes, BusinessObjects Business Intelligence platform delivers historically its own basis SSO based on Kerberos (but only for applications running on BOBJ platform). I recommend to use it if it fits to your requirements. If not, you can configure "Trusted Authentication". In this case BOBJ trusts the authentication of the web applications server. Here you can use SAP Single Sign-On with SAML or certificates.
Regards
Matthias

Similar Messages

Does java provide any support for MD5

I want to develop a program which in vc++ should produce a message digest using MD5 for a file and i want to check this file and hashcode generated for its equality . Does Java provide MD5 algo for it.
ie what i have to do
file + MD5 algo (Implemented in vc++) = Message Digest 1
Will Message Digest 1 == Message Digest Generated by Java MD5 algo + file
Thanks

Here's a simple example of creating an MD5 in java:
    public byte[] createMD5( final InputStream data )
        throws NoSuchAlgorithmException, IOException
        MessageDigest md5 = MessageDigest.getInstance( "MD5" );
        final byte buf[] = new byte[ 8192 ];
        int bytes = 0;
        while ( ( bytes = data.read( buf ) ) != -1 )
            md5.update( buf, 0, bytes );
        return md5.digest();
    }

Is HAGEO supported for SAP Systems?

Could anyone enlighten me as to whether HAGEO (or HACMP/XD) is supported for SAP systems? I have a client who wishes to use this and believes it is fully supported. However, I have been unable to find any references to SAP systems running on HAGEO software.
The IBM competence centre has not so far deigned to respond to my call.
Does anyone know if it is supported/recommended or actually in use for SAP installations anywhere?
This provides essentially HACMP over a much further distance than normal HACMP.
We have proposed a simple HACMP cluster with mirrored disk to a second datacentre to provide DR, however our client thinks it will be cheaper to just have two systems, one in each datacentre, and linked by HAGEO.
I have my doubts but have no evidence to the contrary currently.
Thanks
Andy

For completeness, the ISCC (i.e. IBM) said (basically) don't do it. Use standby databases.
What they actually said was that it was a very complex issue and perhaps we should get lots of IBM consulting in to answer this very difficult question.
But i took the first answer as the likely outcome - don't do HAGEO or HACMP/XD with SAP systems.
Andy.

No Oracle SSO support for POSTing data to protected resource [yet]

Hi,
I am using OHS infront of JBOSS and redirecting all requests from OHS to JBOSS after SSO Authentication.
Everything works fine except that I get 500 error when I try to post data from HTML form.
When i click on a button on a JSP page that submits page with the Form Post, the request goes to the OHS and is not getting forwarded.
OHS log shows the following
127.0.0.1 - - [11/Sep/2007:08:57:23 -0400] "POST /Sample/protected/standard.do HTTP/1.1" 500 788
Proxy_error.log shows the followin error
[Tue Sep 11 08:57:23 2007] [error] [client 127.0.0.1] [ecid: 1189515443:10.6.2.137:268:5568:74,0] \n[OSSO] E09: No Oracle SSO support for POSTing data to protected resource [yet].\n
Any idea?
Thanks
Srikar.

This error does no occur in our dev or test environments, only production. A workaround for us was to disable SSO by commenting the line to load it in the file $ORACLE_HOME/Apache/Apache/conf/httpd.conf. The line to comment out looks like: include "/u01/app/oracle/product/mid/Apache/Apache/conf/mod_osso.conf" where the /u01/app... above is the expansion of $ORACLE_HOME/Apache/Apache/conf/mod_osso.conf.
We do not use SSO for our application, so this is not a problem. I next plan to try to figure out why this behaves like this, so I can keep all the server configurations consistent.
HTH,
Mark

Does Apple provide any certification for Mobile Application testing (iOS)

Does Apple provide any certification for Mobile Application testing (iOS)
Kindly share the details of any Mobile Application testing certification provided by Apple.

I'm not aware of any testing done by Apple except as part of the app approval process:
https://developer.apple.com/appstore/resources/approval/index.html
If you have questions about the review process, though, you can contact Apple via the contact links on that page.
Regards.

Does Apple provide a service for unlocking an IPhone 5 for international use?

Does Apple provide a service for unlocking an I phone 5 for international use?

Thanks for the help. I am already overseas and Sprint will not unlock it now.

Can i get some live problems faced on support for sap hr

Can i get some live problems faced on support for sap hr and how were they resolved? Please give a step by step detail of the sol.
Dear
Member, of all the Issues raised in the forum some of the issues are support issues you can have a look at all these threads
Please read the forum rules before Posting the Query

Hi,
Please be with this SDN.SAP Forum, you will get solutions of all types of queris.
Regards,
Ram Aware

IS UBUNTU SUPPORT FOR SAP-GUI 6.0/5.0

Hi Experts ,
Is ubuntu support for sap-gui .
I am trying to work on module pool program but the program layout/screen open in old editor , so please help me.
Thanks,
Jayesh
Moderator message: not directly related to ABAP development, please have a look in the SAP Netweaver or SAP GUI forums.
Edited by: Thomas Zloch on Aug 30, 2011 10:54 AM

Hello Venkatesh,
Please take a look to the following SAP note 1951805 - Adjusted Version Interoperability for Business Suite 7i2013.
It explains the version interoperability between the products and version on the Business Suite and the different SAP NW releases. In your case, both SAP BW 7.31 and SAP BW 7.02 will communicate without problem with your ERP system.
About the integration between SAP NW and BOBJ 4.1, take a look to this:
Best Practices for Integrating SAP BusinessObjects BI 4.x with SAP NetWeaver Business Warehouse (BW) and SAP ERP
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/507d3365-009b-3010-04b0-e5abc8f00c91?QuickLink=index&…
As far as I know it is possible to integrate SAP BW 7.02 with BOBJ 4.1.
Best regards.

Why apple does not provide the apps for free as samsung doing ??

why apple does not provide the apps for free as samsung doing ??

how the same app is for buy and in the other hand in android OS its free
Free Android apps are generally stuffed full of adverts that drain 75% of the phone battery. See:
http://www.zdnet.com/blog/hardware/android-app-ads-account-for-up-to-75-percent- of-battery-drain/19168
Would you prefer to pay $0.99 for an app or lose 75% of your battery life?

Does Adobe offer a way for me to put my application on my website so they can fill out and sign?

Does Adobe offer a way for me to put my application on line for a driver to complete and sign?

Hi,
Please try with Adobe EcohSign.
Perry

Online Meet-up 3. Does SAP provide explicit support for ALE?

hi,
yes, it does support.
for details on what is ALE please refer
Online Meet-up, 4. What is ALE?
regards,
arul sekar

Please refer to SLIDE NO: 11 of the On-line Meetup Presentation for details on where ALE fits in SAP context.
It is between AII and Device controller.
regards,
arul sekar.

Ora11 Support for SAP R/3 Enterprise 4.7 x110

Dear Oracle People,
in the "Development Update December 2009" there is a u201CBig picture of supported Oracle releases" on p24.
In this picture it is described that SAP R/3 Enterprise 4.7 x110 will not be supported under Oracle 11.
But SAP R/3 Enterprise 4.7 x200 will be supported.
I do not see a substantial technical difference between these two releases. And i do net see why Extension Set 1.10 does not fulfil the requirements for Oracle 11 as described in upper paper on p12 which seem to be: having a 6.40 kernel and extended maintenance at least until 2010
Can you please explain me why 4.7x110 will not be supported under Oracle 11.
Sincerely
Stefan Dietz

Hello Stefan,
You can crosscheck this with sapnote #1398634
Oracle 11.2 release for older SAP releases
A general release is not provided for earlier SAP releases (SAP R/3 3.1I up to and including SAP R/3 4.6C). Similar to Oracle Version 10.2, there will only be a temporary 11.2 release in direct connection with an SAP upgrade project for these older SAP versions.
Oracle 11.2 for SAP Kernel 6.40, 7.x and higher
Oracle Version 11.2 will be released for these SAP kernel versions. In these kernel versions, basically only those SAP product versions that will still be at least part of SAP Extended Maintenance in 2010 will be released for Oracle 11.2.
[UPDATE]
I have also checked the PAM for SAP R/3 ENTERPRISE 47X110 and the kernel 6.40 is also supported .. really strange
Regards
Stefan

Dell Equallogic SAN HIT Kit support for SAP in Linux 11.2

Hello Everyone,
I would like to use an Equallogic SAN as storage in SUSE Linux Enterprise Server 11.2. Is the Equallogic SAN supported in Linux when using the HIT Kit to provide MPIO and snapshot support? The article from thorsten.staerk describes Equallogic SAN + Linux + native iSCSI (no mention of the HIT Kit). I understand that there are restrictions on using third party kernel modules.
My understanding is that the Equallogic MPIO driver will provide a faster, more efficient, connection to the SAN along with additional features.
References:
Playing with an Equallogic storage
http://scn.sap.com/people/thorsten.staerk/blog/2009/02/10/playing-with-an-equallogic-storage
Thorsten describes using Equallogic with SAP on SUSE Linux Enterprise
Thorsten uses native iSCSI drivers
How to configure Multipath using Equallogic Host Integration Toolkit (HIT) on Linux for Oracle
http://en.community.dell.com/techcenter/enterprise-solutions/w/oracle_solutions/3795.how-to-configure-multipath-using-equallogic-host-integration-toolkit-hit-on-linux-for-oracle.aspx
Describes using Equallogic multipath on Linux
Mentions that the Equallogic mpio is a combination of user mode and kernel mode binaries
Dell EqualLogic Host Integration Tools
http://www.dell.com/downloads/global/products/pvaul/en/equallogic-host-software-new.pdf
Host Integration Tools Overview from Dell
Support for CentOS 5.7, Red Hat Enterprise Linux (RHEL) 5.7, 6.1 and 6.2, SUSE Enterprise Linux Server (SLES) 11 SP1
Dell EqualLogic Host Integration Tools for Linux
Installation and User's Guide Version 1.2.0
From the documentation "Installs a compatible prebuilt kernel module, if available. Otherwise, the installation script loads the Dynamic Kernel Module Support (DKMS) package and compiles the Dell EqualLogic-supplied kernel module."
EqualLogic Integration: Installation and Configuration of Host Integration Tools for Linux – HIT/Linux
The Dell EqualLogic HIT/Linux MPIO software consists of two components:
1. The EqualLogic Host Connection Manager daemon, ehcmd, which monitors the iSCSI session state and the configuration of the Linux server and PS Series group. Running in the background, the ehcmd daemon uses the Open-iSCSI management tool (iscsiadm) to add, remove, or modify iSCSI sessions to maintain an optimal number of iSCSI sessions. It also gathers information on the volume layout from the PS Series group.
2. A loadable kernel module, dm-switch, which implements a new Device Mapper target to the multipath devices. Based on the volume layout on the array members, the dm-switch module routes each I/O to the optimal path within the PS Series group.
SAP Note 784391 - SAP support terms and 3rd-party Linux
kernel drivers
The use of binary-only Linux kernel modules or drivers on the same server as SAP software is not recommended by SAP.
Thank You,
Kevin

I'll take a moment to provide an update on the solution. There were some issues with the initial configuration of the in guest iSCSI volumes. If I had to start from scratch, I would run all the storage through VMware. The last round of software updates appears to have resolved a potentially serious issue with iSCSI disconnects. iSCSI has run perfectly for two months now. I'll consider the issue resolved once I have six months without any iSCSI issues.
One remaining issue is that LVM won't initialize properly without implementing a custom init script. The init script work-around is simple and it works.
Configuration Overview:
VMware ESXi v5.5
Equallogic SAN (with v.7.0.3 firmware)
SUSE SLES v11.3
Equallogic HIT Kit for Linux v1.3

Is Solution Manager mandatory for getting support for SAP 4.7?

Hi,
We received a letter from SAP regarding Solution Manager which stated:
"Commencing on April 2, 2007, SAP Solution Manager will be the only source from which customers receive maintenance updates for SAP NetWeaver 2004s and beyond, as well as applications based upon it (including mySAP Business Suite 2005 applications)."
We are still using SAP 4.7. We do not use Solution Manager. Does this statement mean that for getting any updates / support patches on 4.7, we will need to implement Solution Manager?
Can anybody clarify your understanding or SAP's stand on this?
Regards,
Ashish

To add to Dolores point, The link in market place...
https://websmp206.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000689446&_SCENARIO=01100035870000000202&
The link also contains the SAP Tutor file explaining the process. Hope it helps you.
Br,
Sri
Award points for helpful answers

Please Provide a Key for SAP Predictive Analysis 1.15 32-bit

please provide a needed a key for SAP Predictive Analysis 1.15 32-bit to be used in University Lab computers.

Hi Ye,
I am afraid but the only way today is to delete your document without PA / Lumira.
By default, local files are stored at :
User/Documents/SAP Lumira Documents
In this folder you'll see the list of all the documents you have created with SAP Lumira or SAP PA.
Delete the document that you don't want anymore and (re)start SAP PA.
The delete functionnality from the desktop tool is an idea accepted by the Labs (Delete Files in Lumira Desktop : View Idea), but not implemented yet.
Hope it helps,
Edouard

Does SSO2 provide SSO Support for SAP BOBI 4.x Applications?

Similar Messages

Maybe you are looking for