Does Supervisor Engine 6L-E compatible with Cisco Ws-C4506 Non-E switch?

Does Supervisor Engine 6L-E compatible with Cisco Ws-C4506 Non-E switch?

Yes, it is compatible with non-e chassis.
see below:
The Cisco Catalyst 4500 Supervisor Engine 6L-E is also compatible with classic Cisco Catalyst 4500 line cards, chassis (3-, 6-, and 7-slot), and power supplies, providing full investment protection.
link to data sheet:
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/data_sheet_c78-530856.html
HTH

Similar Messages

  • Does Bo 5.1.7 compatible with Windows 7

    Hi All,
    Does BO 5.1.7 compatible with Windows 7?
    Thanks in Advance,
    Karthik Namburu

    Hello...,
    BO5.1.7version best suitable environment is Windows NT. You willn't get any problems in it.
    In Windows XP also it will work, but not perfectly suitable.
    So it is better to choose Windows NT.
    All the Best,
    Madhavi.

  • Lion compatible with Cisco VPN?

    Is Lion compatible with Cisco VPN Client 4.9.01?

    Yes. Boot up in 32 bit mode and the Cisco VPN client 4.9 will work in Lion.
    Restart the mac and hold the 3 and 2 buttons and you'll be in 32 bit mode. The vpn client should work.

  • Does adobe frutiger standard family compatible with Microsoft office

    does adobe frutiger standard family compatible with Microsoft office?

    The OpenType CFF version of Frutiger is compatible with Microsoft Office.
    Beginning with Microsoft Office 2013 / Office 365, Microsoft Office is not compatible with any Type 1 fonts previously licensed by Adobe or anyone else (including Frutiger); that was Microsoft's decision folks!
              - Dov

  • Just bought a Macbook Air.  I does not appear to be compatible with my LCD projector.  What LCD projectors work best with MacBook Air?

    My Cannon LCD LV-7210 projector does not recognize my Macbook Air nor does my Macbook Air recognize it is attached to an LCD projector.  Yes, I do have the proper adapter. 
    What LCD projectors work best with Macbook Air?  Does this LCD projector have auto-detect for computer?
    Thanks!

    I've just purchased a *27in (aluminium case) LCD Cinema Display* and am using it with my MacBook Pro, linked by the supplied three-jack cable (Mini DVI display jack).
    The 27" display uses Mini DisplayPort, not Mini DVI.
    But I also have *a white-cased MacBook (purchased in 2008) which has an older type of display socket*, certainly not compatible with the Mini DVI type.
    The early Mac Book uses Mini DVI.
    1. Is there a cable or adaptor available to link my older MacBook to the Cinema Display? Nothing in the online store looks 'right'
    No. Mini DVI is single-link, and does not support the resolution needed for the 27" display.

  • Does AD-41 music headset compatible with nokia 623...

    Can anyone please tell me does the AD-41 music headset works with nokia 6233.I need an immediate answer please!!!
    Attachments:
    ad-41.jpg ‏59 KB
    hs-20_ad-41_312x312.jpg ‏11 KB

    been earching the Nokia website and That headset seems to only be compatible with the 3250. There doesn't seem to be any link between your phone and tha AD-41 but it seems the AD-46 is compatible with a 6233 but it doesn't provide the functional;ity that I think you are looking for from the AD-41
    Show your appreciation. Hit that kudos button real hard

  • Is switch HP V1910-24G ''JE006A compatible with cisco components such as power injector and cisco SFP

    Hi everbody,
    I need your hand for this case please :)
    this is first time to design outdoor AP, i will use 1532E due to the price is good, but my question is
    * switch HP V1910-24G ''JE006A'' could be compatible with AIR-PWRINJ-30= & SFP cisco 1 G "glc-sx-mmd"
    I am looking for your advice 

    the power injector will work  but the cisco sfp will not work with the HP switch, also i recommend a switch that is already delivering POE+
     

  • Does GemPC Twin card reader compatible with OCF?

    Hi!
    Does anyone know if GemPC Twin card reader is compatible with OCF? And if it is compatible what should i write in opencard.properties file to configure this card reader???

    small adition i'm talking about pure java access to ocf, not pc/sc

  • Is iPhoto '09 compatible with a NAS drive (non mac OS formatted)

    Since I upgraded to iPhoto '09 (8.0.2) iPhoto freezes at opening (empty window with spinning wheel).
    This happens with a huge (10K photos, 50GB) library on a RAID server stardom raidon SL3620-2S-LB2 under linux formatted as ext 2 and connected as a NAS (via gigabit ethernet)
    The same iphoto library on the macintosh HD drive is working fine.
    A small iphoto library is working fine on both the macintosh HD drive and the NAS.
    For info:
    I am not a designer playing with fonts.
    After I upgraded to iPhoto '09 from the DVD, it converted my library and I started to look at the animation which crashed in the middle (face recognition was running in the background).
    Any attempt to restart iPhoto failed (empty window with spinning wheel).
    Then I downloaded the last version of iPhoto.
    I restarted from a clean copy of the iPhoto library.=>Same failure.
    I try to rebuild everything (except the database which was not an option).=> same failre

    With the understanding that iLife '09 is not compatible with non Mac-OS extended disc (it was almost OK with iLife'08), I have applied the following workaround solution:
    1/ I have created a new virtual disk formatted as Mac-Os extended: using disk utility, new image; name=myVirtualDisc, size= more than you current file size, volume format= mac os extended, image format=sparse (faible densité in french) note: (sparsebundle was not possible / necessary for me),
    2/ whenever you want to use it, you have double click on the file named myVirtualDisc. It mounts as a disc appearing on the upper part of the left pane.
    3/ copy the file in the disc
    4/double click on the file name the first time you use it so that iPhoto knows where it is.
    5/ enjoy
    6/if latter you want to resize the maximum size, as it is a sparse image, you can do it after you have ejected the disc and using again Disk utility. Note that a sparse image only takes the place necessary on your disc (based on its content) and not as declared at the time of the creation (which is the maximum until which it can physicaly grow).
    Disclaimer
    - it worked at the first attempt but
    - I got a disk corruption which was detectable but not correctable by Disk utility. I had to create a new virtual disk and transfer the file. After that the faces were no more appearing on the corkboard, I had to delete the face databases inside the package to re-initialise the face recognition process (see separate discussion about this).
    QUESTION to experts:
    is a sparse image a reliable solution? in other word was it an unlucky / uncorrelated coincidence?

  • Is Labview Run-Time engine 2009 SP1 compatible with Windows 8

    I potentially need to install a Labview executable and Run-time engine 2009 on a Windows 8 OS.  From looking at the run-time engine support, it only looks like it only shows windows 7 down to XP.  Does anyone have any experience using Runtime 2009 on Windows 8?

    Hi Awhite144,
    The first version of LabVIEW to officially support Windows 8 is LabVIEW 2012 SP1. That being said, I would expect LabVIEW 2009 to work fine on Windows 8, and if you run into any trouble, feel free to post it here. LabVIEW 2012 SP1 installs a number of older LabVIEW run-time engines (including LabVIEW 2009), so it will install on Windows 8.
    I have not personally used LabVIEW 2009 on Windows 8, maybe if someone else has experience with it they can weigh in, but I expect it to work.
    As an important consideration, I assume you are talking about the full version of Windows 8, not Windows 8 RT. 
    Regards,
    Jeff Peacock 
    Product Support Engineer | LabVIEW R&D | National Instruments 

  • QuickTime 10.1 does not seem to be compatible with OSX Lion  - clicking on the displayed file window switches to another displayed app, doesn't play or control the video.

    If I open a movie file (appears to be any type - .mov, m4v, mv4) it displays on the desktop, but when clicked, the Mac reverts to another open application (immediately UNDER to point of the mouse click) and not the displayed movie file.  It appears the screen mapping is flawed...
    Anyone else have this problem? (does not appear to be a problem with QT7)  Running OSX Lion 10.7.3 and QT Player 10.1 (501.8) - all most current as far as I can tell...

      Yes, same problem. The active clickable area appears to be shifted down and to the right as if it is the shadow mask (to make it look like layers in the display) that is responding. Means you can't move the control palette to the top of the window (to not block security video with time track at bottom) or even close the window. The X in the bubble appears when moused over but the click goes through it.
      Most obvious if you open more than one movie at a time and they cascade. You can't get at the ones underneath until a few down the stack and it gets an upper wrong one.
      Who's testing these things?
      For comparison testing to recreate problem: Mac Pro (System Information has also been dumbed down from System Profiler, push System Report for the useful stuff) with an ATI Radeon HD 5770 driving two displays.
       Also viewing desktop of another computer on the network is slower and, for instance in World of Warcraft, the hand pointer flickers.
      And finder windows can't be narrowed as much any more to show only a list of file names for drag and drop sorting.
      Was hoping that by 10.7.3, it would be safe to jump, since several posts told me how to Terminal > networksetup -setv6off Ethernet to fix iTunes streaming to expresses and other dumb bugs.

  • Does Apple sell any speakers compatible with the iPhone?

    I looking to buy some external speakers for my iPhone. Does Apple sell any speakers that work with the phone? In particular I've been looking at this one:
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=D91 CB922&nplm=TK199VC/A
    Do you think it will work?

    I too am looking for a set of speakers I can use as a dock on my nightstand. Most speakers currently available will work, but you'll have to put the iPhone in Airplane mode to avoid the AT&T GSM buzz interference on the speakers. As far as I've seen nothing has been released yet that is "made for iPhone" w/ shielded speakers to avoid the AT&T GSM buzz.
    I did find this last week and hopefully these will be available soon -
    http://www.iphonegold.org/
    Looks like the JBL Series 3 are being "made for iPhone".

  • Does MSI H67MA-E45 BIOS compatible with SoundGraph iMON VFD?

    Hi!
    I would like to mount SoundGraph iMON VFD in my PC. It connects to MB by USB port. The problem is that BIOS bootup stops showing 92 at the right bottom of display as SoundGraph iMON VFD is connected. If disconnected, then connected later as the bootup procedure is completed all the items operate well.
    MSI H67MA-E45 (B3) V1.9
    What is the matter of it? Please enlighten me.

    looks like you're doing something wrong.
    have you pointed to archive file?

  • Will an ipad brought in america work in the uk.and if it does will the 3g be compatible with mobile sites in the uk

    will an ipad brought in america be ok to use in the uk
    also will the 3g version work on uk 3g many thanks
    john

    Yes and yes.

  • Need a plugin to convert Raw files with CS 6 standalone version. 8.7.1 version of ACR is not compatible with CS 6 in non-cloud form.

    We have a site license for CS6 for our company and for the past year have not been able to convert RAW files from our newer cameras using Adobe Camera Raw. We do not want to use the Cloud version as we work off laptops in the field and overseas and even our offices have only dial-up for internet access where we are located in Monterey.
    Can anyone recommend a plugin raw converter so we can continue to batch process our files with CS 6?

    The camera raw 8.7.1 plugin should work fine in the photoshop cs6 non cloud license version.
    The only exceptions being if you have mac os x 10.6.8 or windows xp/vista, then 8.3 is the newest camera raw plugin that works.
    Which operating system(s) do you have?
    Have you tried Help>Updates from within photoshop cs6 to get the 8.7.1 camera raw plugin.
    Here's an 8.7.1 camera raw plugin installer for photoshop cs6
    https://helpx.adobe.com/x-productkb/multi/camera-raw-plug-in-installer.html

Maybe you are looking for

  • Incrementing a string number for date and time

    There are probably a lot of ways to do this, but I only want to use a bunch of if - else loops if I really need to. I have a date and time for input, let's say 2006-04-19 22:00. In Java, if I convert that to 3 integers (year, month, day), it will out

  • Reg problem in Runtime Constants $SenderService

    Hi       Have a problem , I am using ABAP XSLT Processor  mapping (I have used message split for this particular scenario i.e. input is single file and output is multiple file) Instead of hard coding the sender service i tried to use Runtime Constant

  • Is there a way to log what user that executed a task sequence

    Our MDT task sequence prompts a user to enter their credentials to access the deployment share and see the task sequences to choose from. Is this already logged somewhere, or anyone have any clever ways of producing that information?

  • Problem IDE

    I possess a badge mother K7N2 Delta-L and I have problems with the DVD and the CDRW. I Have connected the hard disk as master primary ,CDRW  as primary slave and the DVD like secondary master. My os. it is Win XP and there are times that the units CD

  • Extension panels, when minimized, dissapear when illustrator is reloaded

    Example; 1. Open kuler extension 2. Minimize the panel, so it only displays the Kuler Icon & the word "Kuler" 3. Close & Restart Illustrator Kuler is now gone, it needs to be manually called back again. The exact same problem occurs with FreegridUI p