Does support pack write over snotes?

Hi,
If I have put in SAP notes via transaction snote and the SAP  installs a support pack which may contain or may not contain the SAP note.
Does the support pack write over the snote?
Or does it migrate the support pack with the snote?
Or does the snote like changing code with modification assistant show in transaction SPAU?
regards
Baran

SPAM -> Support pack transaction do the same job has SNOTE.
And Support pack is a collection of Notes.
So when SPAM go to the program and see the note is already applied .. SPAM don't do anything (if program is correct and not modified).
Rgd
Fré

Similar Messages

  • Does time machine write over old backups?

    I use time machine on 2 external drives. I have a 500gb drive in my macbook and I am trying to back up to a 1tb external drive that is partitioned into 2. The backup fails because I only have 85gb left on my Time Machine partition which totals 532 GB and Time machine needs 400 and something gb for the backup.
    Doesn't Time machine just write over older backups to accommodate the latest?
    Do I have to erase the time machine partition to make a new backup?
    Thanks!

    Clone  - Carbon Copy Cloner          (Often recommended as it has more features than some others)
    Clone – Data Backup
    Clone – Deja Vu
    Clone  - SuperDuper
    Clone - Synk
    Clone Software – 6 Applications Tested
    Commonly Used Backup Methods

  • Upgrade/Support Pack Cut Over Steps

    Hi Experts,
    Please suggest Cutover Steps performed upgrade/Support Pack at each time we update the system along with things like custom  programs that are copied from standard programs which need to be reviewed Etc.
    Thanks in Advance
    Hari

    Hi.
    You should read a corresponding Support Package Stack Guide. Guide can be found at SAP Service Marketplace at  [http://service.sap.com/maintenanceNW70].
    Best regards,
    Aliaksandr

  • Does Logic 8 write over 7?

    I'm looking at getting Logic 8, but don't want to buy it till I know that I can keep Logic 7 running as well. For this, i'm preparing to buy the full version, not the upgrade, just so I have the failsafe of falling back to 7 just in case.
    Will it install next to it without affecting any of 7's functions?
    Thanks.

    Logic 8 leaves your Logic 7 intact. So you can go back and forth. Of course, once you save a song in Logic 8 you cannot open it in Logic 7, but Logic 8 opens Logic 7 no problems.
    I highly recommend cloning/backing up your drive beofre you install, just in case you need to get back to the previous settings. I use Super Duper. Works great for cloning your drive.

  • Report painter report does not exist after applying support pack

    Hi,
    I have created report with the help of report painter for FI.
    Also created transaction code for the same.
    After applying the support pack, while testing I got the error that
    program in the transaction code does not exists.
    How to search that program and where or I need to create the same program again?
    Thanx in advance.
    -Umesh

    The reason could be having (1)  invalid characteristics value or (2) have not properly defined the General Data Section, most likely (1) in this case.
    Either way, go to t-code GRR2 to change the report.
    In the report row or column, is there an Element (the labels in red color) that does not make sense?
    It could still have the correct label names, but double-click and go into "Record Types (from your error message)".  Be sure to have the correctly define values attached to each Characteristics.
    If all above seems okay, try (From top bar, select) Edit --> General Data Section.  Think of this section as the "header data" of the report.
    Good luck
    AY

  • When I open about this mac - more info and I switch through the tabs (display,memory,storage,support,service) it lags (fps drops, animation looks choppy not smooth). Why does this happen? (over 300 gb free,same programs installed,free desk-downloads)

    When I open about this mac -> more info and I switch through the tabs (display,memory,storage,support,service) it lags (fps drops, animation looks choppy not smooth) even though all the mac (programs , interface ) works smooth . Why does this happen? (over 300 gb free,same programs installed,free desktop-downloads -no garbage there- everything neat and tidy.) Need some help. Only there it the animations goes like 2 fps and is not smooth. I do not understand why because the programs are the same so its the usage. Nothing is changed, yet i experience this little issue for a couple of days.

    OK, I'm confused. When I do About this Mac > More Info in OS10.9, I don't see any animation other than the window resizing. Is that the animation you are describing?
    Which if any of the following apply to your computer:
    1) Are you running any anti-virus/internet security applications?
    2) Are you running any "cleaning/tune-up/optimizations" applications?
    3) Any peer-to-peer or torrent downloading software?
    4) Any third-party disk backup software that came bundled with an external hard drive?
    5) Any online backup scheme other than iCloud (Carbonite; GoogleDrive; MS One Drive)?
    6) Did your financial institution ask you to install Trusteer EndPoint Protection (also known as Trusteer Rapport)?

  • Does Dreamweaver CS3  support implicit ftp over TLS?

    Does Dreamweaver CS3  support implicit ftp over TLS? I cannot find this option.

    Ask in the Dreamweaver forum. This forum is for suite specific issues only.

  • MSI 645 ULTRA - DOES IT SUPPORT FAST WRITE -

    MSI 645 ULTRA - DOES IT SUPPORT FAST WRITE -
    coz i want to enable it so i can get higher 3dmarks score.
    so i'm wondering if it supported but i think it doesnt but not sure.
    k thx.

    I am assuming here, that it is always on and that turning it off isnt a option via the less than robust bios' that MSI gives us.  That being said, there is a utility called NVMax that allows you to switch it on and off as well as 2x/4x agp, assuming again, that you have a NVidia graphics card.  
    Try that Emazy, Im curious to see if you get lockups like I do when I check it off.  For me at least, it appears to be on, but greyed out.  Sisoft says that it is capable of fastwrites but not enabled.
    As I mentioned before and as Assaf confirmed, the difference is negligeable and in most cases causes to instability.
    I think Fast Writes was as big a hype as MMX was. :]

  • Does the NF980-G65 support RAID arrays over 2TB?

    Looking to build a new machine fro Windows 7 (and switch to 64bit at the same time), and the NF980-G65 seems to be the closest board to my needs, just a quick question, does the onboard raid controller support raid arrays over 2TB in size? I had a look at the manual and it has a section on migrating an array to a size over 2TB which would suggest it does, but I would like some confirmation as to whether it does or not.

    I've run into this problem with some raid cards when building servers for work, as they were unable to address raid arrays over 2TB and would not allow the creation of the array, I am wondering if the raid controller has the right level of LBA to create a 2TB+ array. I am aware of the need to use a GPT partition to have a partition of over 2TB.

  • Support pack level issue in Standard Finance Program.

    Hi Everyone,
                    i have an issue which is related to Finance. Actually, Finance People are Using a Standard Report (FS10N) - GL Account Line item display. There,Vendor and Customer Details are not displayed (Customer/Vedor Filed is empty) for the normal GL Account. But for the Reconsalation GL accounts they are able to see.
                   For this issue SAP released an SNOTE 1107639 and correction delivered in SAP_APPL  support pack 12.And we already applied it in the system and our current SAP_APPL level is 14. Though it is already available why the problem is still persist.  Another thing is, for the same issue there is another SNOTE 1034354 which guides to enhancement thro' some BADI work in standard program.
                  My question is that if the correction is available in a patch and that is imported as well in to system without any error then it should resolving the problem.but in this case why it does not work out or what could be the reason behind this. As a Basis admin i would like to know.
    Thanks&Regards,
    Siva

    Hi Siva,
    Your query is obsolutely acceptable...
    After supportpack update some times database will not be synchronised with the new updates.
    and more over it seems there is a complete issue with SAP side.... there is only one option in u r hand now just restart the system.but please make sure to take the down time...and check whether the correction is working or not..if not then no luck u need to contact SAP global team and ask them why the corrections are not working properly..
    Regards,
    Srini

  • SB Audigy Series Support Pack 3.1 (OUTDATED)

    <p align="center">[color="#ff0000"]This software/driver pack is unofficial, not supported by Creative Labs.
    <p align="center">[color="#ff0000"]Use it at your own risk.
    Supports any model of the following?Sound Blaster cards (based on Emu0kx DSP):
    - Audigy
    - Audigy 2
    - Audigy 2 ZS
    - Audigy 4
    For?Audigy SE/LS/Value and Li've! 24-bit cards, <a target="_self" rel="nofollow" href="http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&thread.id=4440"]click here for a compatible version[/url].
    Operating systems supported: 32-bit and 64-bit editions of Windows 7?RTM
    ?Vista?SP2 / XP SP3
    Included in the pack:?
    - Audigy series driver 2.8.00.8 (latest beta)
    - ALchemy .30.00
    - Audio Console .32.02
    - DDL and DTS Connect License Activation 2.00.03 (*)
    - Dolby Digital Li've Pack 3.00.03 (*)
    - DTS Connect Pack .03.04 (*)
    - EAX Console 3.00.56 (Windows XP only)
    - Graphic Equalizer 2.00.65
    - MediaSource DVD-Audio Player 2.00.78
    - SoundFont Bank Manager 3.2.00
    - Speaker Settings 2.00.60
    (*) Purchase and activation required, more info at http://buy.soundblaster.com.
    Does this driver improve sound quality or performance? Are there any tweaks?
    No, this driver does not improve sound quality nor increase performance.
    No, there are no tweaks.
    If someone states that its driver improves sound quality and performance, you are being fooled, cheated.
    It is even worse that the so called tweaks come from a person who is not EVEN technically acknowledged, does NOT know anything about Windows internals, software engineering and?sound?fidelity that all audiophiles always look for.
    If you "feel" the sound better, that is the infamous placebo effect and there is no real proof that any tweaks work.
    In fact, I have yet to see a driver that states in its release notes that it improves sound quality.
    I've disassembled about every single .SYS driver, .DLL libraries and .EXE executables and found nothing.
    There are some undocumented registry values, but nothing related to sound quality or performance.
    Would the so called tweaks even exist, they would be in my Support Packs, you can bet that.
    [img"]http://brztech3.googlepages.com/audcondts.png" height="530" alt="Audio Console: DTS Interacti've in Encoder tab[/img] width="44">[img"]http://brztech3.googlepages.com/spkmshte.png" height="46" alt="Microsoft Audio Home Theater Effects for Speakers[/img] width="44">[img"]http://brztech3.googlepages.com/spdifmshte.png" height="46" alt="Microsoft Audio Home Theater Effects for S/PDIF Out[/img] width="44">
    Fixes and improvements:
    - Enables support for?WASAPI exclusi've-mode event-dri'ven playback, seems to be working just fine
    - Fixes the enhancements errors in Windows?mixer and Windows Media Player.
    - Adds Microsoft Audio Home Theather Effects for both Speakers and S/PDIF Out endpoints.
    - Includes Encoder Switcher to enable DTS Interacti've on Audigy cards.
    - Fixes the Audio Console "Internal application error" when enabling the DDL Encoder on localized installs.
    - Updates Audio Console to display DTS Interacti've in the Encoder tab when Encoder switcher is used.
    - Workarounds a bug that?unexpectedly resets the?speaker configuration.
    - Prevents an issue during installation on Windows 7/Vista that may result in low volume when certain enhancements are enabled.
    - Implements Hardware CMSS Headphone by using a workaround.
    - Updates all InstallShield setup scripts to support Windows 7.
    - Fixes installation INI to properly install applications depending on the detected OS.
    - Removes COM workaround for Equalizer, fixed by Creative.
    - Adds workaround to a memory corruption issue preventing Equalizer from starting on Windows 7/Vista.
    - Updates shared modules, responsi'veness on certain applications is improved.
    - Enables CMSS2 and Stereo Surround.
    - Fixes 32-bit ASIO not working on Windows 7 x64.
    - Fixes Encoder not available on Windows 7 x64 (related to fix above).
    - Modifies default format on Windows 7 / Vista to 24-bit, 48kHz.
    - Properly adds support for 64-bit OpenAL and 64-bit ASIO.
    - Sets default speaker setting to 5. to properly reset configs to their defaults during install (fixes Bass and Treble leves not set to 50% on Windows 7 / Vista).
    Undocumented fixes by Creative (not listed in the release notes):
    - Fixes the Enable Dolby Digital Li've checkbox not staying checked when Audio Console is closed.
    - Fixes Equalizer Out of Memory error.
    - Fixes Equalizer settings being lost on Windows 7 / Vista when speaker configuration is changed.
    - Fixes low volume on Windows 7 / Vista when default format is set to anything higher than 6-bit, 48kHz.
    - Fixes MIDI instruments in Melodic Pool not playing when speaker setting is higher than 2. speakers.
    - Restores missing Microphone option in Surround Mixer (documented).
    - Fixes Microphone mute, volume and +20db boost controls.
    [size="3" color="#000000">?
    [size="3" color="#000000">Release Notes:
    Windows Security warning during driver installation
    When prompted with: "Windows can't verify the publisher of this driver software", choose "Install this driver software anyway".
    OpenAL 2D benchmark in RightMark 3DSound crashes your system
    Due to a driver bug, your system will crash if you run the OpenAL 2D benchmark using 63 buffers. No problem With 62 or fewer buffers. OpenAL 3D and OpenAL 3D + EAX benchmarks are not affected.
    Details: DRIVER_IRQL_NOT_LESS_OR_EQUAL (0x000000D) - ctoss2k.sys
    Microphone issues on Windows 7/Vista 64-bit (x64) with 4GB?of RAM or more
    Audigy driver does not support 64-bit addressing, resulting in random issues with the Microphone (static, robotic or distorted voice, white noise).
    Workarounds:
    - install the 32-bit (x86) version of Windows
    - limit the RAM available to Windows to less than 4GB
    - enable Memore Hole in BIOS Setup, if?your motherboard supports the setting
    6. Speakers?incorrectly available on Windows 7 64-bit (x64)
    Due to a version detection bug in the 64-bit drivers, the FilterSpeakerMode registry setting is ignored, exposing the 6. speakers setting on Windows 7 x64 edition.
    Do not choose that mode as it causes sync issues with Windows mixer.
    MediaSource DVD-Audio Player system requirements
    - 32-bit edition of Windows 7 / Vista / XP
    - any Audigy 2, Audigy 2 ZS or Audigy 4 card
    Built-in Decoder on Windows 7 / Vista (requires Service Pack )
    To use the built-in decoder, make sure it is enabled in Audio Console.
    Select "SPDIF Out (Creative SB Audigy (WDM))" as the output device of your player and then configure the AC3/DTS filter to send the stream through SPDIF.
    When you restart your computer, the Tone settings (Bass and Treble) are not applied.
    Just readjust one of the controls one time per boot.
    Advanced EQ and Special FX not available on Windows 7 / Vista
    These presets don't work on Windows 7 / Vista.
    There is no sound in games with OpenAL support on Windows XP
    Disable Advanced EQ and Special FX selecting "No effect" before running the game or program.
    Equalizer settings are lost
    When you run a game with OpenAL support or using Creative ALchemy, the Equalizer settings are lost.
    Just run Equalizer and the saved setting is loaded automatically.
    Tone settings are reset when speaker configuration is changed
    Bass and treble settings are reset when speaker configuration is changed.
    DTS Encoder Switcher
    The Encoder Switcher can be found in the \EncSwitcher folder in the path where you extracted the Support Pack.
    Thoroughly read the ReadMe.txt file included before using the provided?utilities.
    Hardware CMSS Headphone
    To use the hardware CMSS you need to select "Disable all enhancements" in the "Enhancements" tab on:
    Playback Devices -> Speaker Properties
    Now check the Speaker configuration in "Playback devices".
    If it is Stereo, run Audio Console and change it to 4., 5. or 7. and only after that change it to Headphones.
    This procedure ensures that CMSS() will work after a Windows restart, otherwise only CMSS2 will work.
    Microsoft Audio Home Theater Effects
    This driver adds the following audio effects, which are available depending on the current speaker configuration:
    - Bass Management
    - Speaker Fill
    - Room Correction
    - Loudness Equalization
    - Bass Boost
    - Virtual Surround
    - Low Frequency Protection
    Some effects are also available for the "SPDIF Out" device.
    Some Microsoft effects have priority over Creative CMSS effects and will disable the later.
    Windows MIDI Device Configuration Utility
    Use this utility to change the MIDI playback device for 32-bit and 64-bit applications.
    Download:
    New version available here:
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&thread.id=46907?
    All files are property of Creative Technology Ltd, unless otherwise noted.

    IRe: SB Audigy Series Support Pack 3.0 + DTS Encoder Switcher (08/28/2009).
    blunden wrote:
    EddieObscurant: 4. works fine for me in AC3. I use AC3filter though and it has it's own speaker settings. Perhaps that helps until the next release.
    daniel_k: I uploaded it to 4shared.com and MediaFire for you since I don't really like Rapidshare. I hope you don't mind.
    http://www.4shared.com/file/302793/e9678376/Audigy_SupportPack_3_0.html
    http://www.mediafire.com/download.php?rjmznqa2oy
    Sure I don't mind, thanks for helping, but I've?just uploaded an updated package, version 3..
    Fixes an issue that prevents Speaker Fill from working.
    There is also a hotfix in the main post, so those who have already installed Support Pack 3.0 don't need to reinstall.

  • CRM support pack queries

    Hello Support,
    I have CRM 2005 in my landscape.It has the following patch level.
    for ABAP stack it is at Stack 8
    for JAVA stak it is at Stack 4.
    And we are going for both (ABAP and JAVA) to STACK 15 which is latest.
    I have the following query
    1.) Can i directlly upgrade the JAVA stack from 4 to 15. Since i guess the present stack is too low.
    Will we face any issue in doing so. What is the general practise?.
    2.) For the ABAP stack , can i put the whole stack from 9 to 15 in the queue at a time or do one stack at a time.
    Example
    first upgrade it to 9 then 10 and so on
    or directly in one queue to 15, so that we can have only one SPDD and SPAU.
    3.) what is the main SNOTE for the CRM support pack.
    4.) What all pre-requisite are ther perticulary for the CRM support packs.
    Regards
    Anthony

    Hi mohit ,
    Thanks for the reply ..
    Yes , i will try convicing the client for going to latest -1 patches.
    Now you have suggest that we must go for the ABAP to first SP12 and then to the latest -1.
    I have the following query regarding this.
    1.) How should i go to SP12 stack.
    a.) by directly adding all the stacks till 12 in one go. (that is starting the queue from stack 8 to 12 ).
    b.) going one stack at a time (i.e first will bring it to stack 9 then 10 then 11 and then 12)
    c.) going component wise ( eg , first the BASIS till 12 , then the ABAP , then BW and so on.)
    Regards
    Anthony

  • How to remove newly applied support pack.

    Hi all,
      i applied  support pack in my R/3  4.7 server.
    if any procedure for remove already applied support pack.
    Regards.
    Satish

    thanks for the accolade
    well... it´s true - and I highly appreciate it.
    As you surely know, this IS a topic for SAP now for a
    long time. Our hosting services face very similar
    problems than customer landscapes.
    This "landscape management" was - afaik - at least
    one of the good intentions behind new products like
    solution manager.
    Anyhow - and this is my very personal view only and
    of course in no way the view of SAP - these solutions
    seem sometimes like "breaking a butterfly on a
    wheel"...
    Not only that, it doesn´t help in those 1000 basic tasks like those mentioned, it even makes it worse, much worser, than any sqlplus statement can do harm to your system. Without wanting to step on someones toes and with all appropriate respect: It´s a typical prove for an example of highly educated academical but theoretical people  trying to solve practical problems -  It´s getting better, no doubt, but there´s still a pretty long way to go before it will really help.
    I´m of the opinion: If SAP has the strategy "everything is in the database", then please give us tools to maintain that data, if you don´t want people to do that manually using database tools. A "maintenance optimizer" guided procedure is certainly nothing, that really helps
    The CCC-situation is also something I'm aware of.
    Saving maintenance fee on this way does come with a
    different kind of costs, that's for sure.
    Full ack.
    I also agree that for the overall solution at a
    customers site it's not easy to get hold of a
    comprehensive, current and well accessible
    documentation. All I can say about that is, that
    people working on this topic to make the
    documentation more available to everybody.
    The documentation is there, it´s just the vast amount of it killing brains.
    If I as administrator need to keep all those things together, like dependencies between SPs, connections to other systems, codepage issues, printers and all that stuff you deal with every day, why can´t someone from SAP do the same? I mean, SAP expects administrators to do that, why don´t they do it on their own? There are of course tools to assist (System Landscape Manager, Self Diagnose etc.) - but they are all different, all have their own glitches and additional notes, patches etc. you have to deal with ON TOP of all to make them usable for you and they all have a pretty isolated view on an isolated problem.
    As said before, all data is in the database, so use it
    A big
    obstacle with that is surely that customer landscapes
    differ widely and nearly all aspects.
    ...driven by customers? certainly not. You as SAP say "We don´t extend SD functionality any more, use CRM" and "we don´t extend purchase in ERP any more, use SRM" - but they totally forget to keep the customers able to manage those systems, interdependencies, spoken plain technically without even digging into the applications themselves. Example:
    - SRM needs a new SP
    --> dependency to a specific the PI_BASIS in R/3
    --> upgrading PI_BASIS needs a SPAM update
    --> SPAM update needs a new tp/R3trans
    --> tp/R3trans needs a new SQLDBC/Oracle/DB2/libdb 1,000,000 notes - and finding them is impossible, you will probably do the "try-and-error" approach here because there´s simply no chance to get that information at once - because of "isolated problems", isolated groups and abstraction over abstraction.
    I'm used to think of SAP solutions as a kind of
    factories. Although you can actually buy factories
    today for many standard production processes it's
    likely that the one you get will differ from every
    other factory. Documenting such a factory will always
    require individual changes.
    I don´t think so.
    If you have an ERP, CRM and SRM system, they have some sort of connections between them, this is common on all scenarios and is nothing, that is customer specific. On one side you "force" customers to use new products, on the other side you have no tools on side to REALLY´maintain those systems in a landscape aside from a Solution Manager software, that itself needs more maintenance, more mandays of configuration and more nerves to configure than all our systems together when done manually.
    And there´s stil no "support package rollback" function
    Markus

  • Support Pack error in SPAM

    Hi
    I am importing a group of Support Packs into our DEV environment to bring the landscape uptodate, we are running NW04 on Windows 2003 64 bit & SQL Server 2000, I've updated to the latest SPAM and Kernel before the Support Packs.
    When importing in SPAM I have used the calculate queue method, all looks ok, when I perform the import, in the phase TEST IMPORT i get the following error for Support Pack SP 12 for EA-FINSERV 5.00 :
    <b>
    Function MAP2I_BAPICMS_STR_MOV_INS_CRT (CMS_BUSISB104_MAPPI does not fit into the existing function group ((CMS_BUSISB10)</b>
    The only option I am given is to repeat the phase, I've repeated this a few times and get the same error on TEST IMPORT. I'm new to NW04 640 BASIS, but I know from running 4.6X system that you can re-run phases and quite often they work correctly 2nd time round, is it worth changing SPAM to not stop on test import errors ? as I know objects required can be in earlier support packs (i'm applying supports pack EA-FINSERV 5.00 08 to 11 as part of the queue before 12 which is giving me the error.
    I've checked on OSS and cannot find any notes on this error/support pack.
    Thanks.

    nope, not tried with ignore test errors yet, wanted to check opinions here to see if thats the next step to try, or if there's anything else I could try ?

  • Error in JSPM Support Pack update

    Hi,
    i am in the process of doing java support packs form level 9 to 14.
    I am doing 3 at a time
    After the sap-jee support pack got deployed the server0 for j2ee is not starting.
    Pls hlep
    The following is the log of disp_server0
    trc file: "F:\usr\sap\BWD\DVEBMGS01\work\dev_server0", trc level: 1, release: "700"
    node name   : ID13786450
    pid         : 7296
    system name : BWD
    system nr.  : 01
    started at  : Tue Jun 17 16:30:40 2008
    arguments       :
    *       arg[00] : F:\usr\sap\BWD\DVEBMGS01\exe\jlaunch.exe*
    *       arg[01] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[02] : -DSAPINFO=BWD_01_server*
    *       arg[03] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[04] : -DSAPSTART=1*
    *       arg[05] : -DCONNECT_PORT=3227*
    *       arg[06] : -DSAPSYSTEM=01*
    *       arg[07] : -DSAPSYSTEMNAME=BWD*
    *       arg[08] : -DSAPMYNAME=WDBSSAPBWD01_BWD_01*
    *       arg[09] : -DSAPPROFILE=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[10] : -DFRFC_FALLBACK=ON*
    *       arg[11] : -DFRFC_FALLBACK_HOST=localhost*
    [Thr 4660] Tue Jun 17 16:30:40 2008
    *[Thr 4660] *** WARNING => INFO: Unknown property [instance.box.number=BWDDVEBMGS01wdbssapbwd01] [jstartxx.c   841]*
    *[Thr 4660] *** WARNING => INFO: Unknown property [instance.en.host=WDBSSAPBWD01] [jstartxx.c   841]*
    *[Thr 4660] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]*
    *[Thr 4660] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]*
    JStartupReadInstanceProperties: read instance properties [F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties]
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> OS libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Used property files
    -> files [00] : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> os libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID13786400 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID13786450 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID13786400           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] ID13786450           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    [Thr 4660] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 4660] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 6916] JLaunchRequestFunc: Thread 6916 started as listener thread for np messages.
    [Thr 4836] WaitSyncSemThread: Thread 4836 started as semaphore monitor thread.
    [Thr 4660] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 4660] CPIC (version=700.2006.09.13)
    [Thr 4660] [Node: server0] java home is set by profile parameter
    *     Java Home: F:\java*
    [Thr 4660] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID13786450]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : F:\java
    -> java parameters    : -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dstartup.mode=SAFE -Dstartup.action=UPGRADE
    -> java vm version    : 1.4.2_16-b05
    -> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : amd64
    -> heap size          : 1024M
    -> init heap size     : 1024M
    -> root path          : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50121
    -> shutdown timeout   : 120000
    [Thr 4660] JLaunchISetDebugMode: set debug mode [no]
    [Thr 6772] JLaunchIStartFunc: Thread 6772 started as Java VM thread.
    [Thr 6772] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
    *     Java Parameters: -Xss2m*
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 1048576 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djco.jarm=1
    -> arg[  4]: -XX:MaxPermSize=256M
    -> arg[  5]: -XX:PermSize=256M
    -> arg[  6]: -XX:NewSize=171M
    -> arg[  7]: -XX:MaxNewSize=171M
    -> arg[  8]: -XX:+DisableExplicitGC
    -> arg[  9]: -verbose:gc
    -> arg[ 10]: -Xloggc:GC.log
    -> arg[ 11]: -XX:+PrintGCDetails
    -> arg[ 12]: -XX:+PrintGCTimeStamps
    -> arg[ 13]: -Djava.awt.headless=true
    -> arg[ 14]: -Dsun.io.useCanonCaches=false
    -> arg[ 15]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 16]: -XX:SurvivorRatio=2
    -> arg[ 17]: -XX:TargetSurvivorRatio=90
    -> arg[ 18]: -Djava.security.policy=./java.policy
    -> arg[ 19]: -Djava.security.egd=file:/dev/urandom
    -> arg[ 20]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[ 21]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[ 22]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[ 23]: -Dstartup.mode=SAFE
    -> arg[ 24]: -Dstartup.action=UPGRADE
    -> arg[ 25]: -Dsys.global.dir=F:\usr\sap\BWD\SYS\global
    -> arg[ 26]: -Dapplication.home=F:\usr\sap\BWD\DVEBMGS01\exe
    -> arg[ 27]: -Djava.class.path=F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 28]: -Djava.library.path=F:\java\jre\bin\server;F:\java\jre\bin;F:\java\bin;F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs;C:\Perl\site\bin;C:\Perl\bin;C:\Program Files\HP\NCU;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;F:\java\bin;F:\usr\sap\BWD\SYS\exe\uc\NTAMD64
    -> arg[ 29]: -Dmemory.manager=1024M
    -> arg[ 30]: -Xmx1024M
    -> arg[ 31]: -Xms1024M
    -> arg[ 32]: -DLoadBalanceRestricted=no
    -> arg[ 33]: -Djstartup.mode=JCONTROL
    -> arg[ 34]: -Djstartup.ownProcessId=7296
    -> arg[ 35]: -Djstartup.ownHardwareId=T1648851106
    -> arg[ 36]: -Djstartup.whoami=server
    -> arg[ 37]: -Djstartup.debuggable=no
    -> arg[ 38]: -Xss2m
    -> arg[ 39]: -DSAPINFO=BWD_01_server
    -> arg[ 40]: -DSAPSTART=1
    -> arg[ 41]: -DCONNECT_PORT=3227
    -> arg[ 42]: -DSAPSYSTEM=01
    -> arg[ 43]: -DSAPSYSTEMNAME=BWD
    -> arg[ 44]: -DSAPMYNAME=WDBSSAPBWD01_BWD_01
    -> arg[ 45]: -DSAPPROFILE=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01
    -> arg[ 46]: -DFRFC_FALLBACK=ON
    -> arg[ 47]: -DFRFC_FALLBACK_HOST=localhost
    -> arg[ 48]: -DSAPSTARTUP=1
    -> arg[ 49]: -DSAPSYSTEM=01
    -> arg[ 50]: -DSAPSYSTEMNAME=BWD
    -> arg[ 51]: -DSAPMYNAME=WDBSSAPBWD01_BWD_01
    -> arg[ 52]: -DSAPDBHOST=WDBSSDBBWD01
    -> arg[ 53]: -Dj2ee.dbhost=WDBSSDBBWD01
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    [Thr 6772] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 4752] Tue Jun 17 16:30:41 2008
    [Thr 4752] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 4752] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 4752] JLaunchISetClusterId: set cluster id 13786450
    [Thr 4752] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 4752] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 7688] Tue Jun 17 16:30:52 2008
    [Thr 7688] JLaunchIExitJava: exit hook is called (rc = -11113)
    *[Thr 7688] ***********************************************************************
    ERROR => The Java VM terminated with a non-zero exit code.*
    Please see SAP Note 943602 , section 'J2EE Engine exit codes'*
    for additional information and trouble shooting.*
    [Thr 7688] JLaunchCloseProgram: good bye (exitcode = -11113)
    trc file: "F:\usr\sap\BWD\DVEBMGS01\work\dev_server0", trc level: 1, release: "700"
    node name   : ID13786450
    pid         : 4560
    system name : BWD
    system nr.  : 01
    started at  : Tue Jun 17 16:30:55 2008
    arguments       :
    *       arg[00] : F:\usr\sap\BWD\DVEBMGS01\exe\jlaunch.exe*
    *       arg[01] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[02] : -DSAPINFO=BWD_01_server*
    *       arg[03] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[04] : -DSAPSTART=1*
    *       arg[05] : -DCONNECT_PORT=3227*
    *       arg[06] : -DSAPSYSTEM=01*
    *       arg[07] : -DSAPSYSTEMNAME=BWD*
    *       arg[08] : -DSAPMYNAME=WDBSSAPBWD01_BWD_01*
    *       arg[09] : -DSAPPROFILE=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[10] : -DFRFC_FALLBACK=ON*
    *       arg[11] : -DFRFC_FALLBACK_HOST=localhost*
    [Thr 5300] Tue Jun 17 16:30:55 2008
    *[Thr 5300] *** WARNING => INFO: Unknown property [instance.box.number=BWDDVEBMGS01wdbssapbwd01] [jstartxx.c   841]*
    *[Thr 5300] *** WARNING => INFO: Unknown property [instance.en.host=WDBSSAPBWD01] [jstartxx.c   841]*
    *[Thr 5300] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]*
    *[Thr 5300] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]*
    JStartupReadInstanceProperties: read instance properties [F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties]
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> OS libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Used property files
    -> files [00] : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> os libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID13786400 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID13786450 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID13786400           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] ID13786450           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    [Thr 5300] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 5300] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 7140] JLaunchRequestFunc: Thread 7140 started as listener thread for np messages.
    [Thr 6892] WaitSyncSemThread: Thread 6892 started as semaphore monitor thread.
    [Thr 5300] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 5300] CPIC (version=700.2006.09.13)
    [Thr 5300] [Node: server0] java home is set by profile parameter
    *     Java Home: F:\java*
    [Thr 5300] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID13786450]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : F:\java
    -> java parameters    : -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dstartup.mode=SAFE -Dstartup.action=UPGRADE
    -> java vm version    : 1.4.2_16-b05
    -> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : amd64
    -> heap size          : 1024M
    -> init heap size     : 1024M
    -> root path          : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50121
    -> shutdown timeout   : 120000
    [Thr 5300] JLaunchISetDebugMode: set debug mode [no]
    [Thr 6352] JLaunchIStartFunc: Thread 6352 started as Java VM thread.
    [Thr 6352] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
    *     Java Parameters: -Xss2m*
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 1048576 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djco.jarm=1
    -> arg[  4]: -XX:MaxPermSize=256M
    -> arg[  5]: -XX:PermSize=256M
    -> arg[  6]: -XX:NewSize=171M
    -> arg[  7]: -XX:MaxNewSize=171M
    -> arg[  8]: -XX:+DisableExplicitGC
    -> arg[  9]: -verbose:gc
    -> arg[ 10]: -Xloggc:GC.log
    -> arg[ 11]: -XX:+PrintGCDetails
    -> arg[ 12]: -XX:+PrintGCTimeStamps
    -> arg[ 13]: -Djava.awt.headless=true
    -> arg[ 14]: -Dsun.io.useCanonCaches=false
    -> arg[ 15]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 16]: -XX:SurvivorRatio=2
    -> arg[ 17]: -XX:TargetSurvivorRatio=90
    -> arg[ 18]: -Djava.security.policy=./java.policy
    -> arg[ 19]: -Djava.security.egd=file:/dev/urandom
    -> arg[ 20]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[ 21]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[ 22]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[ 23]: -Dstartup.mode=SAFE
    -> arg[ 24]: -Dstartup.action=UPGRADE
    -> arg[ 25]: -Dsys.global.dir=F:\usr\sap\BWD\SYS\global
    -> arg[ 26]: -Dapplication.home=F:\usr\sap\BWD\DVEBMGS01\exe
    -> arg[ 27]: -Djava.class.path=F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 28]: -Djava.library.path=F:\java\jre\bin\server;F:\java\jre\bin;F:\java\bin;F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs;C:\Perl\site\bin;C:\Perl\bin;C:\Program Files\HP\NCU;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;F:\java\bin;F:\usr\sap\BWD\SYS\exe\uc\NTAMD64
    -> arg[ 29]: -Dmemory.manager=1024M
    -> arg[ 30]: -Xmx1024M
    -> arg[ 31]: -Xms1024M
    -> arg[ 32]: -DLoadBalanceRestricted=no
    -> arg[ 33]: -Djstartup.mode=JCONTROL
    -> arg[ 34]: -Djstartup.ownProcessId=4560
    -> arg[ 35]: -Djstartup.ownHardwareId=T1648851106
    -> arg[ 36]: -Djstartup.whoami=server
    -> arg[ 37]: -Djstartup.debuggable=no
    -> arg[ 38]: -Xss2m
    -> arg[ 39]: -DSAPINFO=BWD_01_server
    -> arg[ 40]: -DSAPSTART=1
    -> arg[ 41]: -DCONNECT_PORT=3227
    -> arg[ 42]: -DSAPSYSTEM=01
    -> arg[ 43]: -DSAPSYSTEMNAME=BWD
    -> arg[ 44]: -DSAPMYNAME=WDBSSAPBWD01_BWD_01
    -> arg[ 45]: -DSAPPROFILE=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01
    -> arg[ 46]: -DFRFC_FALLBACK=ON
    -> arg[ 47]: -DFRFC_FALLBACK_HOST=localhost
    -> arg[ 48]: -DSAPSTARTUP=1
    -> arg[ 49]: -DSAPSYSTEM=01
    -> arg[ 50]: -DSAPSYSTEMNAME=BWD
    -> arg[ 51]: -DSAPMYNAME=WDBSSAPBWD01_BWD_01
    -> arg[ 52]: -DSAPDBHOST=WDBSSDBBWD01
    -> arg[ 53]: -Dj2ee.dbhost=WDBSSDBBWD01
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    [Thr 6352] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 5836] Tue Jun 17 16:30:56 2008
    [Thr 5836] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 5836] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 5836] JLaunchISetClusterId: set cluster id 13786450
    [Thr 5836] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 5836] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 6128] Tue Jun 17 16:31:06 2008
    [Thr 6128] JLaunchIExitJava: exit hook is called (rc = -11113)
    *[Thr 6128] ***********************************************************************
    ERROR => The Java VM terminated with a non-zero exit code.*
    Please see SAP Note 943602 , section 'J2EE Engine exit codes'*
    for additional information and trouble shooting.*
    [Thr 6128] JLaunchCloseProgram: good bye (exitcode = -11113)
    trc file: "F:\usr\sap\BWD\DVEBMGS01\work\dev_server0", trc level: 1, release: "700"
    node name   : ID13786450
    pid         : 8152
    system name : BWD
    system nr.  : 01
    started at  : Tue Jun 17 16:31:10 2008
    arguments       :
    *       arg[00] : F:\usr\sap\BWD\DVEBMGS01\exe\jlaunch.exe*
    *       arg[01] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[02] : -DSAPINFO=BWD_01_server*
    *       arg[03] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[04] : -DSAPSTART=1*
    *       arg[05] : -DCONNECT_PORT=3227*
    *       arg[06] : -DSAPSYSTEM=01*
    *       arg[07] : -DSAPSYSTEMNAME=BWD*
    *       arg[08] : -DSAPMYNAME=WDBSSAPBWD01_BWD_01*
    *       arg[09] : -DSAPPROFILE=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[10] : -DFRFC_FALLBACK=ON*
    *       arg[11] : -DFRFC_FALLBACK_HOST=localhost*
    [Thr 6468] Tue Jun 17 16:31:10 2008
    *[Thr 6468] *** WARNING => INFO: Unknown property [instance.box.number=BWDDVEBMGS01wdbssapbwd01] [jstartxx.c   841]*
    *[Thr 6468] *** WARNING => INFO: Unknown property [instance.en.host=WDBSSAPBWD01] [jstartxx.c   841]*
    *[Thr 6468] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]*
    *[Thr 6468] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]*
    JStartupReadInstanceProperties: read instance properties [F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties]
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> OS libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Used property files
    -> files [00] : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> os libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID13786400 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID13786450 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID13786400           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] ID13786450           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    [Thr 6468] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 6468] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 7576] JLaunchRequestFunc: Thread 7576 started as listener thread for np messages.
    [Thr 7312] WaitSyncSemThread: Thread 7312 started as semaphore monitor thread.
    [Thr 6468] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 6468] CPIC (version=700.2006.09.13)
    [Thr 6468] [Node: server0] java home is set by profile parameter
    *     Java Home: F:\java*
    [Thr 6468] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID13786450]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : F:\java
    -> java parameters    : -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dstartup.mode=SAFE -Dstartup.action=UPGRADE
    -> java vm version    : 1.4.2_16-b05
    -> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : amd64
    -> heap size          : 1024M
    -> init heap size     : 1024M
    -> root path          : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50121
    -> shutdown timeout   : 120000
    [Thr 6468] JLaunchISetDebugMode: set debug mode [no]
    [Thr 7456] JLaunchIStartFunc: Thread 7456 started as Java VM thread.
    [Thr 7456] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
    *     Java Parameters: -Xss2m*
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 1048576 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djco.jarm=1
    -> arg[  4]: -XX:MaxPermSize=256M
    -> arg[  5]: -XX:PermSize=256M
    -> arg[  6]: -XX:NewSize=171M
    -> arg[  7]: -XX:MaxNewSize=171M
    -> arg[  8]: -XX:+DisableExplicitGC
    -> arg[  9]: -verbose:gc
    -> arg[ 10]: -Xloggc:GC.log
    -> arg[ 11]: -XX:+PrintGCDetails
    -> arg[ 12]: -XX:+PrintGCTimeStamps
    -> arg[ 13]: -Djava.awt.headless=true
    -> arg[ 14]: -Dsun.io.useCanonCaches=false
    -> arg[ 15]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 16]: -XX:SurvivorRatio=2
    -> arg[ 17]: -XX:TargetSurvivorRatio=90
    -> arg[ 18]: -Djava.security.policy=./java.policy
    -> arg[ 19]: -Djava.security.egd=file:/dev/urandom
    -> arg[ 20]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[ 21]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[ 22]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[ 23]: -Dstartup.mode=SAFE
    -> arg[ 24]: -Dstartup.action=UPGRADE
    -> arg[ 25]: -Dsys.global.dir=F:\usr\sap\BWD\SYS\global
    -> arg[ 26]: -Dapplication.home=F:\usr\sap\BWD\DVEBMGS01\exe
    -> arg[ 27]: -Djava.class.path=F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 28]: -Djava.library.path=F:\java\jre\bin\server;F:\java\jre\bin;F:\java\bin;F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs;C:\Perl\site\bin;C:\Perl\bin;C:\Program Files\HP\NCU;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;F:\java\bin;F:\usr\sap\BWD\SYS\exe\uc\NTAMD64
    -> arg[ 29]: -Dmemory.manager=1024M
    -> arg[ 30]: -Xmx1024M
    -> arg[ 31]: -Xms1024M
    -> arg[ 32]: -DLoadBalanceRestricted=no
    -> arg[ 33]: -Djstartup.mode=JCONTROL
    -> arg[ 34]: -Djstartup.ownProcessId=8152
    -> arg[ 35]: -Djstartup.ownHardwareId=T1648851106
    -> arg[ 36]: -Djstartup.whoami=server
    -> arg[ 37]: -Djstartup.debuggable=no
    -> arg[ 38]: -Xss2m
    -> arg[ 39]: -DSAPINFO=BWD_01_server
    -> arg[ 40]: -DSAPSTART=1
    -> arg[ 41]: -DCONNECT_PORT=3227
    -> arg[ 42]: -DSAPSYSTEM=01
    -> arg[ 43]: -DSAPSYSTEMNAME=BWD
    -> arg[ 44]: -DSAPMYNAME=WDBSSAPBWD01_BWD_01
    -> arg[ 45]: -DSAPPROFILE=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01
    -> arg[ 46]: -DFRFC_FALLBACK=ON
    -> arg[ 47]: -DFRFC_FALLBACK_HOST=localhost
    -> arg[ 48]: -DSAPSTARTUP=1
    -> arg[ 49]: -DSAPSYSTEM=01
    -> arg[ 50]: -DSAPSYSTEMNAME=BWD
    -> arg[ 51]: -DSAPMYNAME=WDBSSAPBWD01_BWD_01
    -> arg[ 52]: -DSAPDBHOST=WDBSSDBBWD01
    -> arg[ 53]: -Dj2ee.dbhost=WDBSSDBBWD01
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    [Thr 7456] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 7648] Tue Jun 17 16:31:11 2008
    [Thr 7648] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
    [Thr 7648] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 7648] JLaunchISetClusterId: set cluster id 13786450
    [Thr 7648] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 7648] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 7432] Tue Jun 17 16:31:21 2008
    [Thr 7432] JLaunchIExitJava: exit hook is called (rc = -11113)
    *[Thr 7432] ***********************************************************************
    ERROR => The Java VM terminated with a non-zero exit code.*
    Please see SAP Note 943602 , section 'J2EE Engine exit codes'*
    for additional information and trouble shooting.*
    [Thr 7432] JLaunchCloseProgram: good bye (exitcode = -11113)
    trc file: "F:\usr\sap\BWD\DVEBMGS01\work\dev_server0", trc level: 1, release: "700"
    node name   : ID13786450
    pid         : 7280
    system name : BWD
    system nr.  : 01
    started at  : Tue Jun 17 16:31:25 2008
    arguments       :
    *       arg[00] : F:\usr\sap\BWD\DVEBMGS01\exe\jlaunch.exe*
    *       arg[01] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[02] : -DSAPINFO=BWD_01_server*
    *       arg[03] : pf=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[04] : -DSAPSTART=1*
    *       arg[05] : -DCONNECT_PORT=3227*
    *       arg[06] : -DSAPSYSTEM=01*
    *       arg[07] : -DSAPSYSTEMNAME=BWD*
    *       arg[08] : -DSAPMYNAME=WDBSSAPBWD01_BWD_01*
    *       arg[09] : -DSAPPROFILE=F:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS01_WDBSSAPBWD01*
    *       arg[10] : -DFRFC_FALLBACK=ON*
    *       arg[11] : -DFRFC_FALLBACK_HOST=localhost*
    [Thr 5400] Tue Jun 17 16:31:25 2008
    *[Thr 5400] *** WARNING => INFO: Unknown property [instance.box.number=BWDDVEBMGS01wdbssapbwd01] [jstartxx.c   841]*
    *[Thr 5400] *** WARNING => INFO: Unknown property [instance.en.host=WDBSSAPBWD01] [jstartxx.c   841]*
    *[Thr 5400] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]*
    *[Thr 5400] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]*
    JStartupReadInstanceProperties: read instance properties [F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties]
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> OS libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Used property files
    -> files [00] : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Instance properties
    -> ms host    : WDBSSAPBWD01
    -> ms port    : 3900
    -> os libs    : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID13786400 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID13786450 : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID13786400           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    -> [01] ID13786450           : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\instance.properties
    [Thr 5400] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 5400] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 4264] WaitSyncSemThread: Thread 4264 started as semaphore monitor thread.
    [Thr 4488] JLaunchRequestFunc: Thread 4488 started as listener thread for np messages.
    [Thr 5400] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 5400] CPIC (version=700.2006.09.13)
    [Thr 5400] [Node: server0] java home is set by profile parameter
    *     Java Home: F:\java*
    [Thr 5400] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID13786450]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : F:\java
    -> java parameters    : -Djco.jarm=1 -XX:MaxPermSize=256M -XX:PermSize=256M -XX:NewSize=171M -XX:MaxNewSize=171M -XX:DisableExplicitGC -verbose:gc -Xloggc:GC.log -XX:PrintGCDetails -XX:+PrintGCTimeStamps -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -XX:SoftRefLRUPolicyMSPerMB=1 -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dstartup.mode=SAFE -Dstartup.action=UPGRADE
    -> java vm version    : 1.4.2_16-b05
    -> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
    -> java vm type       : server
    -> java vm cpu        : amd64
    -> heap size          : 1024M
    -> init heap size     : 1024M
    -> root path          : F:\usr\sap\BWD\DVEBMGS01\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50121
    -> shutdown timeout   : 120000
    [Thr 5400] JLaunchISetDebugMode: set debug mode [no]
    [Thr 4872] JLaunchIStartFunc: Thread 4872 started as Java VM thread.
    [Thr 4872] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
    *     Java Parameters: -Xss2m*
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 1048576 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -Djco.jarm=1
    -> arg[  4]: -XX:MaxPermSize=256M
    -> arg[  5]: -XX:PermSize=256M
    -> arg[  6]: -XX:NewSize=171M
    -> arg[  7]: -XX:MaxNewSize=171M
    -> arg[  8]: -XX:+DisableExplicitGC
    -> arg[  9]: -verbose:gc
    -> arg[ 10]: -Xloggc:GC.log
    -> arg[ 11]: -XX:+PrintGCDetails
    -> arg[ 12]: -XX:+PrintGCTimeStamps
    -> arg[ 13]: -Djava.awt.headless=true
    -> arg[ 14]: -Dsun.io.useCanonCaches=false
    -> arg[ 15]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 16]: -XX:SurvivorRatio=2
    -> arg[ 17]: -XX:TargetSurvivorRatio=90
    -> arg[ 18]: -Djava.security.policy=./java.policy
    -> arg[ 19]: -Djava.security.egd=file:/dev/urandom
    -> arg[ 20]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[ 21]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[ 22]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[ 23]: -Dstartup.mode=SAFE
    -> arg[ 24]: -Dstartup.action=UPGRADE
    -> arg[ 25]: -Dsys.global.dir=F:\usr\sap\BWD\SYS\global
    -> arg[ 26]: -Dapplication.home=F:\usr\sap\BWD\DVEBMGS01\exe
    -> arg[ 27]: -Djava.class.path=F:\usr\sap\BWD\DVEBMGS01\exe\jstartup.jar;F:\usr\sap\BWD\DVEBMGS01\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 28]: -Djava.library.path=F:\java\jre\bin\server;F:\java\jre\bin;F:\java\bin;F:\usr\sap\BWD\DVEBMGS01\j2ee\os_libs;C:\Perl\site\bin;C:\Perl\bin;C:\Program Files\HP\NCU;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;F:\java\bin;F:\usr\sap\BWD\SYS\exe\uc\NTAMD64
    -> arg[ 29]: -Dmemory.manager=1024M
    -> arg[ 30]: -Xmx1024M
    -> arg[ 31]: -Xms1024M
    -> arg[ 32]: -DLoadBalanceRestricted=no
    -> arg[ 33]: -Djstartup.mode=JCONTROL
    -> arg[ 34]: -Djstartup.ownProcessId=7280

    We installed teh objects through SDM .
    this solved the issue

Maybe you are looking for

  • Attachment in UWL is opening except for .TXT extension file

    Hi, The attachment in the workitem is oppening in SBWP for all file extensions, For the same workitem in UWL its not oppening. It opens only for .TXT extension files. Please advise how to fix this error. Regards Sri

  • Photoshop CS4 on Mac OS X Yosemite keeps crashing when saving as PSD

    Please help!!  I have a major project due involving hundreds of photos that require editing, and I cannot save an edited photo using CS4 as a PSD file - just crashes, closes and pops up a crash report.  I am desperate!  I have a new Macbook Pro and a

  • Service Tax on Goods Transport

    Hi How can we configure the Service Tax on Goods Transport in India Here the tax has to be posted both as Input Credit and Liability Thanks Murali

  • IMessage verification email not being delivered.

    I am trying to add another email address to my list of receiving iMessage email addresses and I can never receive the verification email Apple is supposed to send me to make that address active. I have tried numerous times and even look in the spam f

  • File present in InDesign CC not found in Illustrator

    Lately, when I've selected an .ai or .eps file to edit in InDesign CC (Links panel>pencil icon), the file doesn't open in Illustrator CC. Illustrator CC opens and then claims that the "File not found", which requires me to go to File>Open... in Illus