Does sync still work on Aurora for mobile devices (Android)))?

cannot access sync anywhere.. swiping to the side doesn't work, neither is there anything in the menus.

Hi,
In the Aurora mobile build that was just made available today, there is a new sync.
This is the first drop and is very unstable, but if you update to the 1.17 Aurora build, you will see Sync in a new location, under Applications on your Android phone. It has the familiar Sync icon and is called Firefox Sync.
It will sync your Bookmarks and Passwords only and again is very new. But, I set it up this morning on my HTC shift and it is working great for me, so thanks in advance if you try it and test it out!
-Michelle

Similar Messages

My phone cant sync on my itunes, looking for mobile device software

my phone sync doesnt work.it say my apple mobile device not started.
help please.
thanks
sam

Type "Apple mobile device service" into the search bar at the top of this page by "Support" and read the resulting articles.

Can I play embedded video in Adobe Reader for mobile device (android tablet)?

I have created a PDF file using adobe xi pro and embedded a video in the file. When I move the file in my tablet (andorid jelley bin) and try to run the video file using mobile Adobe reader nothing happen. Any help will be appreciated.

I had a similar problem, and I found this response in an older Adobe forum post. Check it out.

I dropped my iphone 3gs in water and grabbed it immediately out. It gave me a charger is not supported with device screen every minute or two. I powered it off for the night. I havent experienced problems since. Why does it still work?

I dropped my iphone 3gs in water and grabbed it immediately out. It gave me a charger not supported sign every minute or two. I decided to turn it off for the night and the next morning it worked fine and only the bottom sensor was triggered. Why does it still work and how long will it last?

Water in itself will not kill electronic components if you let it dry out. Your first reaction to turn it off was a good one but you could have waited even longer.
It also depends what's on your water that will stay after the water itself had dried; like salt. Anything that iseither acid or conductor left on the circuit board will reduce the life of the board. Given said this, no one could state how long your iPhone will work since no one will know for sure where the water had time to infiltrate before you removed your device and no one what's may left there.
Consider yourself lucky. I don't understand however what you mean by a sensor triggered.

ITunes, Remote.app v2: Does v2 still work in iOS7 or will I be automatically updated to version 3? (Plus v3 and iTunes issues)

Remote.app (version 2): Does it still work in iOS7 or will I be automatically updated to version 3?
That is basically the main question I've come to ask (with some side commentary in parenthesis below).
After trying out iTunes Remote App version 3, I saw that it scrambles playlists (such as Recently Purchased), which makes my playlists worthless. For example, using Remote.app, it's no longer possible to simply play the songs you bought over the last week at the iTunes Store using the Recenlhy Purchased Playlist. Since I buy a lot of music through the iTunes Store, I naturally want to listen to what I just paid for, just as I could using Remote.app version 2.
But it's not just the Recenly Purchased playlist, it's all my playlists. Through the last decade, day in and day out, I've carefully orgnized hundreds of playlists that I've very crafted, song by song like old mix tape casettes.
They payoff for this work has been enormous. Since starting with mp2 in 1995, then mp3 and continuing through to the thousands of dollars I've spent purchasing songs through the iTunes Store and tens of thousands on iPods, iPhones, iPads, and computers—I've been able to make music match whatever mood or music was juuust right for the moment, making for great moments and memories with friends and families. For some artists, I always want to hear their latest songs first or I want to to hear top rates songs first. Other lists are about creating a particular mood for just about any occasion. I can even shift the mood in the room with the right music list. It's really been fantastic the memories and moments I've been able to set the tone with the right song, and most of this has been not the song itself, but the flow of music I've created by orgnizing music lists. That's a lot of work I've invested. So the order of the songs matters a lot to me, especially the very first song that starts that list. That's the song I want to hear first, not somewhere in the middle.
As of Remote.app version 3, these carefully crafted songlists are scrambled, making the App worthless. When I first noticed this I couldn't believe it, must be a bug. Nope, no bug, by design I found out. It's like when Lucy pulls the football away. It's mean spirited to take back features you've sold and promoted and people have grown to rely on in the workflow of their lives. So I downgraded back to Remote.app version 2.
((Actually, they're not really technically scrambled, they're actually presented in alphabertical order, which I think is really the same thing to me. Think about it: listening to an artists work alphabetically by title is really the most random and completely scrambled way to listen to their music. Or if you don't want to listen to them alphabetically, you can have them shuffled. Those are now the only two choices. Either way, the lists are jumbled, and like iTunes 11, several of the most powerful features have been taken away. In this case the exact thing that's missing is that the iTunes Remote no longer reflects the sort order of iTunes playlists.
I don't know if this is a quiet, update-by-update shift away from our playlists and towards iTunes Radio or not, but I would think so. Why else would you make it less powerful. To quote Merlin Mann Apple tends to "fire a warning shot" feature wise before taking something away. The Finder has gotten less and less powerful in finding files and folders by their name and size through the last decade.
I'm now noticing the same thing with iTunes, it's becoming more difficult to find the currently playing song. In iTunes 10, Go to Current Song would open the folder containing the list of the currently playing song, highlight and move that list to the top of the left column and then highlight that song. In iTunes 11, Go to Current Song will only highlight the folder that contains that song and nothing more. At that point you're on your own to hunt town the currently playing song. This feature has been broken—on purpose I suspect.))
SO—I don't want to be forced into Remote.app version 3 and have my playlists scrambled on my iPhone and iPad. Is there anyone who knows the answer from first hand experience?
If customer loyalty is as important to Apple as it should be taking away features in iTunes and Remote app will only drive old customers away.
Thanks!!
David

I like that I would be able to maintain my iPhoto library data for Faces and Places in Aperture, but am concerned that when the iPhoto library is "upgraded" for Aperture, and I decide I don't really need that program, the upgraded library won't work with iPhoto anymore.
The iPhoto library isn't changed in any way by Aperture. Aperture will import the Library and you can choose to copy the files to the Aperture Library or reference them within iPhoto. As long as you don't delete files from the iPhoto Library via Aperture (which you could do if you choose to Reference) there is no impact on iPhoto
Will I still be able to use iPhoto to access and organize my library, or will it be forever converted for use with Aperture?
They are completely different libraries.
Recently, iPhoto bugs make Events show up multiple times in iTunes when syncing for iPhone and iPad.
Fixed in the 9.1.3 update.
Will I find a better user experience with Aperture, or does it also use the single file library and suffer the same struggles iPhoto users have been seeing lately?
Like iphoto, Aperture can use the "single file library" or it can use a Referenced Library (just like iphoto can). Note that using a Referenced Library offers not a whit more in terms of features or capabilities. It's file storage plain and simple. Nothing more.
No you won't see the "same struggles iPhoto users have been seeing..." because Aperture is an entirely different allication.
But you my see Aperture or Lightroom struggles
Regards
TD

When I sync with my iphone i get an error reporting message but the sync still works. After trying to download 10.6.3 Mac OSX Snow Leopard, this message appears every few seconds until I quit Entourage. How do I turn this message off?.

Question:
When I sync with my iphone I get an error reporting message but the sync still works. After trying to download 10.6.3 Mac OSX Snow Leopard, this message appears every few seconds as long as Entourage is open. This continues until I quit Entourage. How do I turn this message off? It interferes with any other work I am doing. I appreciate any suggestions.

I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
Edit: I just removed every project I have from the Media Browser. Still no luck.

My iphone 3 will not sync with itunes - it says Apple mobile device is not started, also does it with ipad - any ideas?? thanksple mobile device is not starte

my iphone 3 will not sync with itunes, it says Apple mobile device is not started, also doing it with ipad - can anyone help??? thanks

Restart your computer. Run iTunes and check for updates. If there is a later version of iTunes available, download and install it. Then try again. If you still cannot see your iPad listed in iTunes make a list of all the things you have tried so that we can see exactly what steps you have taken.

A relative synced my iphone with his laptop without me knowing. It had a passcode on the phone but the sync still worked. I have since found out he is quite IT knowledgeable and has been known to track other peoples phones. How is this data useful to him

A relative synced my iphone with his laptop without me knowing. It had a passcode on the phone but the sync still worked. I have since found out he is quite IT knowledgeable and has been known to track other peoples phones that he wants to know information about. How is my data useful to him and can he restore this data on another iPhone and run it parallel to mine? I have had people send me messages which I have not received. These have been screen shot to me later including time and I have just not got them. I had 4 weeks worth of messages go missing from my phone..I know that he synced my phone because his work laptops I'd came up in my settings. Also if the above can be done can he change the settings on my actual phone and access my location without placing tracking software on my phone. Can someone please help here as I can't restore a backup to my phone for obvious reasons and refuse to change my number because of this loser.

Connect the device to the computer.
In iTunes, select the content desired to sync.
Sync.
This is all described in the User's Guide, reading it may be a good place to start.

IOS 7 doesn't work on iPod touch 4g, so does the mean its the end for this device? Or are they going to make updates specially for lower devices an apps that are compatible ??

iOS 7 doesn't work on iPod touch 4g, so does the mean its the end for this device? Or are they going to make updates specially for lower devices an apps that are compatible ??

Which apps remain compatible will be up to the individual developers who sell those apps. There will be no further iOS updates, but those aren't really necessary to continue to use and enjoy your device. I still have an iPad 1 running on iOS 5, and it is fully functional.
The App Store has an app called VintApps 3.1.1 that is specifically geared toward iOS 3.1, however, you would probably be able to run most of those apps on your iPod, and considering that there will be a rather large market for iOS 6 apps users, it is not likely that you will see a significant reduction in choices any time soon.
It is not the end for the device in any sense except that it is at it's ultimate iOS level. And again, I have an iPad that is at it's ultimate iOS level (iOS 5), and I get new apps all the time that work for both my iPad and my iPhone that runs iOS 6.1.1
No need to fret....
Cheers,
GB

Does CS5 have tools for creating websites for mobile devices?

Does DW CS5 have any built in tools for creating web pages for mobile devices, iPads, iPhones, etc?
Thanks.

This will go back to your other post about the CSS tables, it depends on how much you know. CSS3 is a style language and while support is growing in Dreamweaver and within browsers it is taking some time so the more you understand the code the better off you will be. With regards to HTML5 animations, you will find that no tool out there can do this easily outside of some Apple developer tools and if you are serious about programming to work with the iPhone/iPad you will want to sign up (registration is free) and download their developer tools. Adobe has mentioned making some strides and trying to use their existing tools (ie: Flash) to help transition to HTML5 animations from Flash and Illustrator has also gained some HTML5 vector tools to help out.
To find out more about what Adobe is doing for HTML5 there was a post made on John Nack's blog not too long ago that you might want to read over (and follow the links).
http://blogs.adobe.com/jnack/2010/11/so-what-has-adobe-actually-done-for-html5-lately.html
Dreamweaver is not going to hand you everything though. To get the most out of it you have to put something into it. It is easily the most advanced tool in the PHP and ColdFusion realms (ASP/.NET goes to Visual Studio). But in order to do more and customize things to your needs, understanding the code is a must in the world of web design.

IWeb - does it still work?

Every time I open iWeb it comes up with the error message (which is sent to apple) and asks if I want to reopen. I re open & get the same message.
Does it still work? I haven't used it for ages...
If not then how do I find the pics & videos that are embedded in iWeb?

To open your domain file in Lion, Mountain Lion or Mavericks or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script"/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"
delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
For Mavericks, 10.9 , go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
If using the iWeb Switch Domainapp doesn't let you open your domain file try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.

Does Apple still sell replacement batteries for the white 13" MacBook?

Does Apple still sell replacement batteries for the white 13" MacBook?

You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
Or for $129 from The Apple Store http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY

Does iTunes still offer ring tones for iPhone?

Does iTunes still offer ring tones for iPhone? I cannot seem to locate it on the web site.

Yes.
Some songs available via the iTunes store are also licensed to be sold and used as a ringtone. You can use the iTunes ringtone creator to create a ringtone for your chosen segment of a song that is also licensed to be used as ringtone.

Does FaceTime still work when you're browsing the Internet simultaneously

Does FaceTime still work when you're browsing the Internet simultaneously on your phone?

triptifromsan francisco wrote:
Does FaceTime still work when you're browsing the Internet simultaneously on your phone?
iOS: Using FaceTime - Apple Support
in my experience with facetime, you can't browse other apps or features while on a facetime video call.

Does Cisco WAP4410N work as repeater for Linksys E4200 ?

Does Cisco WAP4410N work as repeater for Linksys E4200 ?
Hi,
i have Linksys E4200 and I need repeater for it ...
Can anybody help me with this issue ?
BR

Thx for answer
I tested it and it works as Wireless Client - computer connected by ethernet wire is OK, everything works (DHCP etc)
but when i turn on " Allow wireless station to associate" in WAP4410N settings of "Wireless Client/Repeater" it doesn't work at all
I mean clients on wireless side and on wire side too ( DHCP doesnt work , there is no communication )

Does sync still work on Aurora for mobile devices (Android)))?

Similar Messages

Maybe you are looking for