Does System Center Update Rollup 4 also contain Update Rollup 3 and Update rollupt 2, etc
Hi,
Does System Center SP1 Update Rollup 4 also contain Update Rollup 3 and Update rollupt 2, etc?
Can I go from Update rollup 2 and apply update rollup 4 and get the updates in 3 as well?
Thanks Lance
Hello!
Yes, the previous updates are included in UR4, so there is no need to install UR3 if you are going from UR2 to UR4.
By the way, the latest update rollup for System Center SP1 is UR5: http://support.microsoft.com/kb/2904730/en-us
Markus Bölske, Lumagate. www.lumagate.se Blog:
www.opsmanager.se|www.scdpm.se
Similar Messages
-
System Center Update publisher 2011 command line
Hi, I was wondering if there was any command lines and switches or powershell commands to automatically import catalogs and publish updates with System Center Update publisher 2011
joeblowHi,
This forum is focusing on the issues of WSUS.
Due to your question is more related to the System Center, to get better help, please post your question on the forum below:
https://social.technet.microsoft.com/Forums/en-us/home?forum=configmanagersecurity&filter=alltypes&sort=lastpostdesc
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
System Center Updates Publisher
Hi All,
I'm looking at deploying some Adobe software, specifically Flash, and their download page refers to an alternative mechanism of obtaining the software being System Center Updates Publisher.
I can't find an awful lot on it, so:
1. Is it compatible with CM 2012 R2, and if so is there a resource on enabling/installing it?
2. Is it a better mechanism than just downloading the update and creating an application?
TIASCUP 2011 is supported with certain limitations take a look here
http://blogs.technet.com/b/configmgrteam/archive/2013/12/11/system-center-updates-publisher-2011-support-statement-update.aspx
Download Kent Agerlund's install and config guide from here
http://blog.coretech.dk/kea/the-complete-scup-2011-installation-and-configuration-guide/
It's a great addition to ConfigMgr however catalogs that are available for it for free are limited.
Cheers
Paul | sccmentor.wordpress.com -
I have a temp working for me and she scanned all our batches upside down is there a way to flip them and save them without her having to rescan every batch. We have tried flipping them and doing a save as, we have also tried to flip them and create a new pdf document but nothing seems to be working
If the file type is PDF then open them in Acrobat and rotate them via Tools - Pages - Rotate (not via the View menu, which is only temporary).
You can also do this in an Action, if you have Acrobat Pro, and process multiple files in a single process. -
Systems Center Update publisher
I have Systems Center 2012 R2 setup and running on a Windows Server 2012 R2 box. I installed update publisher on this same box so I can get the Adobe catalogs and include the adobe updates with my other updates. Update publisher installed just
fine, but I'm running into issues when trying to set it up. Under Options > Update Server > Connect to local update server when I enable it I get the following message when I test the connection:
When I click the "Create" button under Signing Certificate to create a certificate I just keep getting that same pop-up everytime I click it. I read somewhere that 2012 no longer will create self signed certs, but I'm not sure how to get
around this issue. Anyone have any help? Thanks in advance.Here's the info on re-enabling WSUS self-signed cert generation:
http://blogs.technet.com/b/wsus/archive/2013/08/15/wsus-no-longer-issues-self-signed-certificates.aspx
I suggest you don't re-enable this though -- they disabled it for a reason. Go the extra mile, get a PKI smart resource and deploy a PKI.
Jason | http://blog.configmgrftw.com | @jasonsandys -
Remote Desktop and Doing System / Software Updates
I am new to Remote Desktop. I am starting to use it daily in my class room to share things with students and lock screens, etc. Is there an easy way to do system updates and software updates (adobe flash player, java, etc.) without having to manually log in to each machine? I have to believe there is a better way...could someone point me in the right direction? Thanks!
Oh, my version of Remote Desktop is 3.7.2
-
System center sql 2012 remote or local install
Guys I'm testing System Center 2012 R2 right now I plan on installing configuration manager for starters. I would like to ask you guys did you install your sql server instance locally for System Center or do you have a remote SQL server installation that
System Center is using are there any pros for installing a local instance over a remote one? Also I was reading somewhere that Sytem Center comes with an SQL server license I always assumed that it would come with SQL Server express and not full blown
SQL Server. So with that said does System Center incluse a full blown SQL Server license?Hi,
In test environment, typically SQL can be on local instance. However in production environment, you can place SQL on remote as when collocated the site server supports a maximum of 50,000 Clients, and if database server is installed on
a Remote server, the Site-Server supports up to 100,000 Clients.
In System Center 2012, along with any edition of Server Management License you get a run-time instance of SQL Server Standard edition when utilized for the SQL engine used by the System Center components.
For further information about SQL Requirements:http://technet.microsoft.com/en-us/library/gg682077.aspx
About System Center Licensing:http://www.microsoft.com/licensing/about-licensing/SystemCenter2012-R2.aspx#tab=1
Regards, Manohar Pusala -
How to sequence Microsoft System Center Service Manager?
AppV Version: 5.0
OS: Windows 7 64-bit
Application Name: System Center Service Manager 7.5.2905.0
Issue: This applications has a shortcut named as "Service Manager Shell" which will launch as shown in screenshot below,
The same shortcut will launch as shown in screenshot below with Sequenced Application,
Please let me know how to make this shortcut launch same as source.
Regards,
ReddyI would check the package for any reference of the specific path to the C:\Program Files\Microsoft System Center 2012 path. Also have you run a ProcMon trace to see where the app is looking for the files? The certificate may be pointing to the C:\Program
Files Directory rather than the App-V path..
PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
rorymon.com Twitter: @Rorymon -
Virtualization service status - unknow system center 2008
hi .
i installed system center 2008 on a 2012 server ,
i created several machines on it and they are working fine ... the problem is i cannot do any action like clone or create check points or migrations from system center ..
beside every vm there is a message host is not responding and in the properties of the hyper v host error virtualization service status - unknow but all other options are checked ok
i ve 2 network cards on the host server one is used for the virtual machines and the other is for the local network
all machines are assigned to that virtual network card
please advice on solving this issueOf the 18 or so machines, most have not been frequent repeat offenders (popping up only every few days) but there are a few that have been somewhat daily offenders. I have removed the client, rebooted, reinstalled the client manually on the heavy offenders
and this has not corrected the issue.
When I RDP to the machine and try to stop the System Center Management service it take awhile (30+ seconds) and then I get an error stating:
Windows could not stop the System Center Management service on local computer. Error 1053: the service did not respond to the start or control request in a timely fashion.
The when I click OK the service is stopped and I then start it. If I stop it again it takes like 5 seconds and does not give any error.
From looking at the Operations Manager event viewer I have multiples of:
A scheduled discovery task was not started because the previous task for that discovery was still executing. Event ID 10000
The Windows Event Log Provider monitoring the Application Event Log is 1124 minutes behind in processing events.
This can occur when the provider is restarted after being offline for some time, or there are too many events to be handled by the workflow. Event ID 26017 (note on this one, this occurs right after the nightly reboot) --- I flushed the Health Service
State and Cache, still get the System Center Management service to stop responding within an hour and a heartbeat failure on SCOM.
No firewall.
AV (Symantec Endpoint Protection) is clear with the same setting as all the servers.
These servers that keep having the issues do have citrix loaded but again, nothing has changed on the client (servers) side from SCOM 2007 to SCOM 2012 and we never got these in 2007, just 2012.
As for the “ServicesPipeTimeout” I could not locate a key in the registry with that value. -
Import System Center Monitoring Pack for System Center 2012 - Service Manager into SCOM 2007 R2
I would like to know if there is SCSM 2012 SP1 MP available for SCOM 2007 R2 ?
I downloaded the "System Center Monitoring Pack for System Center 2012 - Service Manager" MP from
http://www.microsoft.com/en-us/download/details.aspx?id=29980 and then import into SCOM 2007 R2, however, I found that there are some MP dependencies issue.
For example, the "Microsoft System Center Service Manager Library" MP requires "Microsoft SystemCenter Library" and "System.Health.Library" MPs of version 7.0.8427.0. Howerver, the "Microsoft SystemCenter Library"
and "System.Health.Library" MP in SCOM 2007 R2 is of version 6.1.7221.0Import Management Pack from DVD disk SCOM 2012 R2
SW_DVD5_Sys_Ctr_2012_R2_English_OpsMgr_MLF_X19-18307.ISO\ManagementPacks
Have a nice day !!! -
I recently installed Update Rollup 3 for System Center Data Protection Manager 2012 R2.
As part of the update I updated all DPM Agents, including the ones on our Hyper-V Servers (which are part of a cluster). I also rebooted every DPM Protected Servers. After reboot all Hyper-V Servers raise a warning that the VssNullProvider service has stopped.
Backup seems to work properly. I can start the VssNullProvider service manually. But after the next backup the service it is stopped again. Exactly the same issue occurs on our test Hyper-V Cluster. All our Hyper-V Servers run Windows Server 2012 R2 and
we use System Center Virtual Machine Manager 2012 R2.
Something is not ok with Update Rollup 3. Any suggestions?
Boudewijn Plomp, BPMi Infrastructure & Security
Please remember, if you see a post that helped you please click "Vote as Helpful" and if it answered your question, please click "Mark as Answer".Hi
SEE NEW BLOG:
Support Tip Service Manager alert for the VSSNullProvider service after installing
DPM 2012 R2 UR3
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.
Thanks!
Boudewijn Plomp, BPMi Infrastructure & Security | Please remember, if you see a post that helped you please click "Vote as Helpful" and if it answered your question, please click "Mark as Answer". -
I just applied update:
Update Rollup 3 for Microsoft System Center 2012 R2 - Virtual Machine Manager (KB2965413)
and (KB2965414) but it failed to install.
After a reboot I could not login to the VMM and the service would not start
An event id 0 was reported with:
Service cannot be started. System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
at System.Reflection.RuntimeModule.GetTypes(RuntimeModule module)
at System.Reflection.RuntimeModule.GetTypes()
at System.Reflection.Assembly.GetTypes()
at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.BuildKnownAssemblyTypes(Assembly assembly)
at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.InitializeKnownTypesCache(List`1 assembliesToExamine)
at Microsoft.VirtualManager.Engine.Remoting.IndigoServiceHost.InitializeKnownTypesCache()
at Microsoft.VirtualManager.Engine.VirtualManagerService.TimeStartupMethod(String description, TimedStartupMethod methodToTime)
at Microsoft.VirtualManager.Engine.VirtualManagerService.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
After I removed the update the VMM was able to start, no reboot required.
When I have time I will try to apply both updates again successfully and see if the issue still occurs.
Vista Ultimate Dell XPS M1330FYI. I've had the same issue after I installed Update Rollup 3 (KB2965413), seeing the exact same error on event log. Tried to start the service manually, getting service unable to start error. This is a machine running
with Windows Server 2012 Standard. Solution for me is simple. I just install
KB2965414 (Update Rollup 3 for SCVMM 2012 R2), reboot the server, and the SCVMM service auto start up by itself. -
Error installing DPM Agent in Update Rollup 5 for System Center 2012 R2 Data Protection Manager
I have updated my main DPM server to Update Rollup 5 for System Center 2012 R2 Data Protection Manager and all went well.
All Protected servers updated and rebooted and continued protection - EXCEPT one;
Physical Windows Server 2012 R2 Datacenter.
Tried Manual install - no luck
Removed Protection Agent / rebooted / re-installed - no luck
Installed all updates / re-install - no luck
this seems to be the only indicated problem in MSDPMAgentInstall.LOG.....
Property(S): PATCHMediaSrcProp = C:\Windows\Microsoft Data Protection Manager\DPM\ProtectionAgents\RA\4.2.1292.0\DPMProtectionAgent_KB3021791.msp
MSI (s) (04:34) [09:24:23:772]: Product: Microsoft System Center 2012 R2 DPM Protection Agent - Update 'Microsoft System Center 2012 R2 DPM Protection Agent Update - KB3021791' could not be installed. Error code 1603. Additional information is available in
the log file C:\Windows\\Temp\MSDPMAgentInstall.LOG.
MSI (s) (04:34) [09:24:23:772]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 R2 DPM Protection Agent. Product Version: 4.2.1292.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft System
Center 2012 R2 DPM Protection Agent Update - KB3021791. Installation success or error status: 1603.
MSI (s) (04:34) [09:24:23:772]: Note: 1: 1729
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2205 2: 3: Error
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1729
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2205 2: 3: Error
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1709
MSI (s) (04:34) [09:24:23:772]: Product: Microsoft System Center 2012 R2 DPM Protection Agent -- Configuration failed.
MSI (s) (04:34) [09:24:23:772]: Windows Installer reconfigured the product. Product Name: Microsoft System Center 2012 R2 DPM Protection Agent. Product Version: 4.2.1292.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success
or error status: 1603.
Any help would be greatly appreciated.Hotfix for known issue with Update Rollup 5 for System Center 2012 R2 Data Protection Manager
http://www.microsoft.com/en-us/download/details.aspx?id=45914&WT.mc_id=rss_alldownloads_all
Have a nice day !!!
DPM 2012 R2: Remove Recovery Points -
Update Rollup 8 for System Center 2012 SPM - DPM Error
Hi,
I am trying to install the above security update onto my 2012 DPM server but it keeps failing.
MSI (s) (64:EC) [11:16:20:172]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 SP1 - Data Protection Manager. Product Version: 4.1.3313.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft
Data Protection Manager 2010 Update - KB2991995. Installation success or error status: 1603.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 1729
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager -- Configuration failed.
I see there is a forum article for dpm 2012 Update Rollup 3 could not be installed, however nothing for Update 8.
Is the fix the same?
Thanks
SimonHi,
I am trying to install the above security update onto my 2012 DPM server but it keeps failing.
MSI (s) (64:EC) [11:16:20:172]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 SP1 - Data Protection Manager. Product Version: 4.1.3313.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft
Data Protection Manager 2010 Update - KB2991995. Installation success or error status: 1603.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 1729
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager -- Configuration failed.
I see there is a forum article for dpm 2012 Update Rollup 3 could not be installed, however nothing for Update 8.
Is the fix the same?
Thanks
Simon
Facing Exact same issue. Below is log:
MSI (s) (80:84) [00:37:39:482]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager - Update 'Microsoft Data Protection Manager 2010 Update - KB2991995' could not be installed. Error code 1603. Additional information is available in the log
file C:\Program Files\Microsoft System Center 2012\DPM\DPMLogs\DataProtectionManager-KB2991995.log.
=== Logging stopped: 3/9/2015 0:37:39 ===
MSI (s) (80:84) [00:37:39:482]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 SP1 - Data Protection Manager. Product Version: 4.1.3313.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft
Data Protection Manager 2010 Update - KB2991995. Installation success or error status: 1603.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 1729
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:497]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager -- Configuration failed. -
Systems Center and WSUS - Deploying updates
Hi
I'm having a bit of a nightmare trying to get a client to update from Systems Center when using WSUS.
I've installed and downloaded on Systems Center the necessary updates etc but the test PC had difficulty downloading the updates.
Upon research I had put in the group policy the name and port of the server in the "Specify intranet Microsoft Update service location" but apparently this was wrong as it uses the configuration manager and software update point, so the group policy
intranet entry is now disabled.
The PC then updated and I thought that it was working. However upon looking further, I believe that all that is happening is the PC is going direct out to the internet for the updates instead! There is no status change in the configuration
management console (in Deployments it is saying Unknown) and there were far more updates being applied than I'd configured in the Software Update Group.
My sanity is close to breaking as this seems far more complex than it should be.
What should I have in the Group Policy? What logs are most useful in helping me figure out what I'm doing wrong?
Thanks for any help.The only thing that is essential is that you should not have a GPO pointing to a previous WSUS server. If this is in place then ConfigMgr will ignore all updates deployments. It is best practise to implement a GPO to actually disable automatic updates (although
this is not mandatory).
The following logs will give you a complete understanding of what is happening on a client:
UpdatesDeployment.log
UpdatesHandler.log
WUAHandler.log
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson
Maybe you are looking for
-
What happened to the "today" category in FINDER?
I really like LION but wish I could still find files by selecting the "today" or "yesterday" option. Is there a way to get that back? thanks,
-
'Request timed out' on Application Loader
I cannot upload my binary using Application loader. Error message is either 'request timed out' or 'connection lost' during the "Sending API usage to iTunes Connect". (Upload worked yesterday, my internet connection has not changed).
-
Profile folder with user.js preferences
I've been struggling with removing mixi dj on & off for a couple of weeks. I've done everything suggested but everytime I open a new tab, there it is. However, I've found this in the profile folder - Your profile folder contains a user.js file not cr
-
Query field contains backward slash
I am trying to query a field contains backward slash (for example, "com\aaa\bbb" in database) by using kodo 2.5.2 and msde2k. If I use the following condtion string, I am not able to get any record back. Sring condtion = "com\\aaa\\bbb"; String filte
-
Set preferred Wi-Fi network in my preferred order on iOS6
My iPhone is running iOS6.1.3. It has approved connection to two nearby Wi-Fi networks. But it too often connects to the less preferred Wi-Fi network, instead of the most preferred one. Is there a way to set the preference order of Wi-Fi networks