Does sytem shutdown after update?

I have played remotely this week, it has worked so good, and will not come home until after weekend. Now it does not work anymore...why oh why did I have it on automatically update ...

stenbocken wrote:
Ok @hayzink, that could be it, so I need somehow click on the update...tricky one.Guees wedont know until Monday.as soon as the update became available you would have been unable to use psn features till its installed. so everything will be fine just nothing you can do till your home.

Similar Messages

HT1688 My Hot Spot does not work after update to 6.0.1. Service is with ATT. Apple says problem is with ATT, ATT says problem is with Apple. Anyone else having this problem?

My Hot Spot does not work after update to 6.0.1. Any suggestions?

Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

Click to activate does not work after update

Click to activate plugin does not work after updating to version 23.0.1

hello Kamullia, if you have set click-to-play to true in about:config you can now go to the ''addons-manager > plugins'' section and set the permissions individually for each plugin type.

WiFi iPhone 4S does not work after update iOS 6.0

WiFi iPhone 4S does not work after update iOS 6.0

This sounds more like a hardware issue.
Have you checked that the dock connector port is not dirty?

Print size in Photoshop CC does not work after updating

Print size in Photoshop CC does not work after updating, it was working fine before but now when I click to go to print size either from the menu of right chicking when the hand tool is selected, the image just zooms right out until it is a tiny little box in the centre of the screen, no good what so ever, as I say it was working fine before the update.
I am using window 7 with 8 gb of ram and an I7 with a 1GB graphics card.
Can anyone help please?
thanks
Fujibill

Check the Image>Image Size and see what the print size is supposed to to be for the open document.
Also, resetting the photoshop cc preferences might fix it.
http://forums.adobe.com/thread/375776?tstart=0

Firefox does not start after updates

Every time i get an update, download it and restart Firefox, it does not restart and i have to run the set file again. It means too that the updates have not been dowl=nloaded !
Windows 7 ultimate. 4Gb ram 1 Tb Regards

I AM ABSOLUTELY SICK-SICK-SICK OF THIS PROBLEM. I HAVE TRIED EVERYTHING BUT IT STILL DOES NOT RESTART AFTER UPDATES. I HAVE DELETED/CREATED NEW PROFILES, DONE CLEAN INSTALLS - NO CHANGE!!!
I HAVE CHECKED FOR VIRUSES - NOTHING. CLEAN. I AM ABOUT READY TO GIVE UP AND SEND A LETTER TO A LOCAL TECH/MEDIA PERSON SO THAT THEY CAN WRITE AN ARTICLE ABOUT THIS ISSUE THAT FOR SOME REASON MANY OTHERS HAVE AS WELL AND YOU=MOZILLA HAVE NOT OFERED ANYTHING CLOSE TO A SATISFACTORY RESPONSE, EXPLANATION, FIX, ETC ETC ETC

IOS 7 app store update list does not clear after updates have been installed

iOS 7 app store update list does not clear after updates have been installed

Rifles wrote:
Good point, we will have to wait and see, it's a pity Apple has not produce an IOS7 PDF
You mean like this one?
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Best of luck.

G4 MacMini won't sleep or shutdown after update to 10.4.8

Since updating using software update to 10.4.8 on the logout screen I mostly used the "Sleep" option after logging out from my account. To begin with things seemed fine, but now, it won't go to sleep. If I click on the button to sleep the computer, the controls get greyed out for about 30 seconds to a minute, then return to their normal state - but the computer does not enter sleep mode.
Shutdown doesn't work either! I had to hold the power switch on the back down for a few seconds to force it to switch off. Interestingly, the internet connection light on the router was flashing irregularly while I was waiting for it to switch off.
I have reset the permissions (only after the install, not before), reset the PRAM, and searched the system preferences to see if something is glaringly obvious as being wrong but have found nothing and no have no further clue what I can do...
Is it related to my not wanting iTunes to provide Album Artwork at all? For some time, every time I opened iTunes it demanded I update my Album Artwork, but I don't want to and don't have an iTunes account. I had put off downloading both 10.4.8 and iTunes 7.0 for almost a week - until software update failed to provide a Cancel button for me to refuse again!
How can I get sleep and shutdown to work properly?
MacMini, PowerBook, PowerMac G5 DC Mac OS X (10.4.8) Mac OS X Server 10.4.8

Problem Solved!
I copied the combo update over the existing system but this alone changed nothing. Because I was unsure of which of my seemingly many OS X disks to load I rang Applecare (thank God I signed up for the three years of extra phone support - a real bargain) and they suggested I do a PMU reset - after which everything worked fine - so far.
They warned me about not doing a PMU reset very often (I guess the PMU can only stand a certain number of these events before breaking). In order to do one follow these steps:
1) Switch off computer;
2) Unplug ALL leads and power cables to the computer;
3) Wait ten seconds;
4) Simultaneously hold the power on button down while plugging the power cable in to your Mac;
5) Connect your other cables.
6) Switch on and go.
For me, this fixed all my other problems - Sleep, Restart, Shutdown, Printing, iSight, Internet connection speed, Quick Time performance, and so far I haven't seen anything else wrong to fix. Hopefully there won't be anything else to fix!
If anything does go wrong after this, I will do the Archive and Install, which was the next suggestion from Apple which I did not need to do. So far.
Thanks to all those who gave suggestions, I appreciate your help.
Thanks,
Mac

Home sharing does not work after update to snow leopard 10.6.4 and iTunes 9

I am using home sharing since about a year without any problems. After updating to snow leopard 10.6.4 and iTunes 9.2 it suddenly does not work anymore.
On my iMac and my Mac Book Pro I get error code 3259 and it tells me to check my firewall and to enable Port 3689.
I did not change anything in the firewall settings, itunes on both allows data traffic in both directions. I also do not find any option to activate a port ( also wondering why this is suddenly now necessary)
I deactivated home sharing on both machines and enabled it again. It still does not work.
On both machines iTunes displays the the library on the left side but like said it is not accessable
With Finder I can access the other computer from both machines without any problem.
Any help to solve this would be very much appreciated

first of all, if you are behind a router firewall, and have your network secured (WPA2 and a long, non-dictionary password made up of letters and numbers), you don't need the software firewall on your Mac(s).
@ least turned if off for troubleshooting purposes.
turn home sharing off on both computers, and make sure
(a) both Macs have access to the internet
(b) iTunes on both machines is authorized for the same iTunes account.
turn home sharing back on on both Macs.
does it work ?
JGG

Card slot does not work after update (14/10/2011)

Card slot does not work after yesterday update (14/10/2011)! It works with my SD card month ago, but now it dosn't!!!
MacBook Pro 13 OS ver. 10.6.8

Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

Itunes does not work after Update any more

Itunes does not start after the uodate and cannot be reinstalled.
Seems not only a problem to me
Any solutions yet ?

Hello Wizzie71,
It sounds like you updated iTunes and now it will not open. Try the steps outlined in the following article. You may need to re install iTunes but your library will remain intact if you do.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Thank you for using Apple Support Communities.
Regards,
Sterling

Marketplace widget does not work after update

Updated phone (Droid X) this morning (10-24-10). Seemed to go fine until I clicked on what was supposed to be the marketplace widget. It said something to the effect that the application was not installed. The usual Icon was replaced by a blue icon with the settings "cog" on the right side. Is there anyway to get the Marketplace widget back? By the way, it also does not show up in the application window or in the "Manage Applications" list. I have temporarily put a shortcut to the internet Marketplace on the home page.

This is a common issue after update.
There is only 2 ways I know that seem to work.
1. Reinstall app from a market backup apk (EStrong File Explorer works well)
2. Hard Reset on device.
Reset works but use the method here.... http://community.vzw.com/t5/DROID-X-by-Motorola/Minimize-Droid-X-Issues-After-Froyo-Update/m-p/296586#M11211 or
Follow these settings during restore to avoid issues being restored automatically.
1. Go to homepage on device
2. Click left menu hard button
3. Select Settings from list (Bottom Right of Screen)
4. Scroll to "Privacy" in list
5. Select "Privacy"
6. Uncheck "Automatic Restore" and then "Back up my data" under Settings/Privacy
7. Click OK on the menu that pops up that says "Are you sure you want to stop bacing up your settings andapplication data and erase all copies on Google server?"
8. Click Factory Data Reset
9. Click Reset Phone
10. After reset is complete follow step to setup but do not input Google Email information
11. Once phone is at homepage go back into Settings/Privacy and make sure the Automatic Restore option is unchecked, even if grayed out, activate "Back up my data" and quickly disable "Automatic Restore"
5. After being sure that the Automatic Restore option is off it will be safe to log into Google by going to My Accounts and press New account button at bottom and input email account information.
This process will stop all applications and settings from restoring automatically and restoring original issues that usually resolve a number of issues.

Lid closing does not suspend after update today

...and again: after todays update lid close does not longer trigger suspending my t420s. The last times(!) the cure came always with another update. Please do it again It saves a lot of time.
Thx ahead

I spent a lot of time with reading threads about this topic and I tried all friendly hints and tricks. But I'd never achived a real solution. Everytime it was "magical" fixed with one of the next updates. I guess this happens the 3rd time now. All I want to say is: "thank you for fixing again". For me it's a funny sport after updating: check lid close suspend, check backlight, check bumblebee. I can live will all this tiny issues followed by a fix. That's why I love Arch:)
Last edited by wwn (2014-10-07 08:02:20)

Iphone does not activate after update

My Iphone 3 does not activate after last update. What can I do? The system does not let me pass the activation process so it is totally useless now.

There are a number of things:
1. iPhone 3G cannot update to 6.1.2 the highest IOS is 4.2.1.
2. This is a sign that your iPhone was hacked or jailbroken.

IPAs 2 does not rotate , after updating to 7.1.2

Dear Sir,
i have purchased this iPad in 29th Feb 2012 .
SErial No is DL*****KNV
Model MC 992LL/A
i have been using this IPad and there is nothing wrong , except that there is no rotation. This has happened after updating to 7.1.2 .
i Had taken this and shown this to ur Sales & Service centres and they have said that they cannot do anything to this . My IPad is not damaged
PLease help me with this error .
I Also have a I Phone 4S , and this is working fine now,. This also had the same problem , but was rectified by the Service Engineers of Apple.
RAmesh M Rao
PHone *****
<edited by host>

FIrst thing - Don't post your phone number (or other private information) here, this is a public forum for Apple users to help other Apple users, it is not monitored by Apple support staff.
Tutorials
Second thing - Check the status bar at top of your iPad screen, next to the battery level indicator is there an icon of a padlock with a circular arrow surrounding it? If so the iPad has been locked into its current screen orientation, to unlock it slide the switch on the right-hand side of the case above the volume rocker switch up and see if the padlock icon disappears and the screen now rotates correctly (for this to work Settings/General/USE SIDE SWITCH TO: should have "Lock Rotation" checked, if "Mute" is checked instead then use the padlock icon in Control Center to lock/unlock screen rotation).
If it still won't rotate the screen then try resetting the iPad - hold down the sleep/wake button and the Home button simultaneously and keep them held until you see the Apple logo appear on the screen, then release the two buttons and allow the iPad to finish rebooting normally. Does screen rotation now work?

Does sytem shutdown after update?

Similar Messages

Maybe you are looking for