Does Telstras 4g Network work in bunbury WA

If 4g is in bunbury where else is it in western australia

What does Telstra have to say about it... Have you checked with them...

Similar Messages

MSI Z87-G45 GAMING.. does the killer networking work with Windows 8.1?

I was scrolling through the reviews for this board and someone mentioned in the reviews that the killer networking isnt supported with windows 8.1 yet.
Is this still true or are there updated drivers for windows 8.1 now?
Thanks.

There is a driver posted on MSI's website for 8.1.
http://www.msi.com/product/mb/Z87-G45-GAMING.html#download

Hi i want to buy an ipad from america with cellular and i want to connect it in jordan does the network work in my country JORDAN , because i dont see unlock ipad??

hi i want to buy an ipad from america with cellular and i want to connect it in jordan does the network work in my country JORDAN , because i dont see unlock ipad in apple store??
in apple store no ipad unlock for cellular if i bring it with cellular from america does it work in JORDAN ??
THNANK ALOT

US iPads are not locked to a carrier. Don't buy a Verizon or Sprint model, though.
Regards.

Does iTunes match only works on my Iphone 5 when im on wifi network??

Does iTunes match only works on my Iphone 5 when im on wifi network??

Go to Settings > iTunes and App Stores and set to "use cellular data" to ON. Be aware this will use your mobile data allotment when streaming music.

I'm using iTunes 9 and I recently just bought AirPort Express. I have used it before in the past put the problem I have now is that I cannot select the Express network for my speakers. Does Airport Express only work with iTunes 10 or 11?

I'm using iTunes 9 and I recently just bought AirPort Express. I have used it before in the past put the problem I have now is that I cannot select the Express network for my speakers. Does Airport Express only work with iTunes 10 or 11?

Hello Hornet12,
Indeed, iTunes 10.2 or later will be required to utilize AirPlay.
Using AirPlay
http://support.apple.com/kb/HT4437
AirPlay requirements and capabilities
To get full AirPlay features, make sure your AirPlay-enabled devices are running the latest software updates. The table below identifies minimum AirPlay requirements and capabilities:
Stream content from
Requirement
Notes
iPad
iOS 4.3 or later.1
From the Videos, iPod, Photos, Music, and YouTube apps on iOS devices, stream videos, music, and photos to an Apple TV (2nd and 3rd generation), or stream music to an AirPort Express or compatible third-party device.
With iOS 4.3 and later, you can also stream video and audio from a website or a third-party app installed on your iOS device if the developer for the app or website has added AirPlay functionality.
iPhone (3GS or later)
iPod touch
(2nd generation or later)
Computer
iTunes 10.2 or later.
Stream videos and music from your iTunes library to an Apple TV (2nd and 3rd generation), or music to an AirPort Express or compatible third-party device.
Apple TV
Apple TV software version 5.1 or later.
Stream music from your Apple TV to another Apple TV (2nd and 3rd generation), to an AirPort Express or compatible third-party device.
Cheers,
Allen

Does Home Sharing not work through a network extender?

Home sharing seems to cut out whenever I get into range of my network extender (Airport Express).
Here's my setup, it's pretty standard: Cable modem wired to Airport Extreme router, which is connected wirelessly to the MBP with my iTunes hard drive. All of this is in my living room.
I use the Airport Express to extend my network into the bedrooms.
Whenever I'm home sharing from my iTunes library on my iPhone, if I walk to my bedroom, it cuts out. It usually crashes the iPod app. If it doesn't completely crash it, I can get it to restart buffering if I walk back to the living room.
Does Home Sharing not work with wireless extenders? Do I have to change something in the set up?

However, when a device goes from being attached to one wireless device to another, there is often an interruption as the device must change the radio connection to the network. There is a brief period of no connectivity (a second or two)
Try starting the share while in your bedroom instead of the living room. I'll bet it works.
Makes sense - so it's a bug in the iPhone OS, that it's unable to recover from temporary interruptions to wifi connection?
However, I'm not so sure. Starting the share in the bedroom works as you suggest (since 4.3.2 - didn't under 4.3.1) - but as soon as you go back to the living room and the iPhone connects to a different base station the music stops playing. Note also that the shared library itself ceases to work. So for example you can't be in one room (on the extender) and add the shared library (without actually playing anything yet) then move to another room (on the base station) and play a track from the shared library. It just plays dead and you have to explicitly reload the shared library to get anything to play.
So is it maybe a bug also with iTunes that it can't keep up with a shared library client moving from one wifi station to another?
How do you report these things to the people that matter by the way?

I am considering an IPhone5 which I want to "tether" to my laptop and IPad. Does anyone know which network works best. TMobile tell me that they will only tether upto 1GB data, will this be sufficient?

I am considering an IPhone5 which I want to "tether" to my laptop and Ipad. Does anyone know which network works best. TMobile tell me that they will only tether upto 1GB of data, will this be sufficient?

I have the AT&T family plan for use with my laptop, iPhone an iPad with 6GB per month. I tend to use the tethering far more often with the MacBook Pro than the iPad (mine has cellular) and I don't think I've had any month where 1 GB would have been sufficient for tethering. Do they have a plan where they will let you pay for additional tethering? If so I would go to at last 2 GB.
Or look into AT&T.

Why does everyone at my work loose their internet connection when I update Adobe Cloud Products?

Why does everyone at my work loose their internet connection when I update Adobe Cloud Products? We are on a 20mb broadband connection and there is around 20 people using computers at my work but when I start my Adobe Cloud Product update or when I try and download my Adobe Cloud Product everyone at my work looses their internet connection and so do I. But the update keeps downloading and installing.

I am sorry FooWingLi but the difficulties you are describing sounds more like a local network configuration issue. I would recommend working with your I.T. department to investigate this matter.

Does the ethernet port work when the using airport express in client mode?

I am considering using an airport express to extend my existing wireless network to a room where I can't get a cable to.
I will need to connect a at least 3 devices to the airport express.
The questions are:
- is an airport express the right answer to this problem?
- if so, does the ethernet port work (AE on client mode) as a passthru into the main network?
- can I plug a hub to it?
Thanks
RFSF

Hi Tesserax,
Really appreciate you taking time to respond.
I stopped by the Apple store this weekend and one of their sales people ( not one of their genius bar people) told me NO to all questions. I tend to believe more answers from people in this forum but just realize that I have not mentioned one possibly important point:
the main AP to which I will be connecting the airport express is not an Airport Extreme/Express AP.
Thanks,
Ricardo.

SCOM 2012 SNMP Trap - Does anyone have it working?

I am wondering if anyone out there has had any luck with getting SNMP Traps to be captured by SCOM 2012? Probes work fine.
We have been unable to get SCOM 2012 to receive a SNMP Trap from network devices. We currently have a case open with Microsoft, but they dont have any answers as of yet.
Here are the cliff notes version of what we have done so far.
Discovery - OK
The nodes discover without issue. I made sure they were set to SNMP only. I did this to verify we were talking SNMP and not just ICMP.
Open Ports/Firewall Issues
No firewalls are in place on the SCOM server and none exist between devices we are trying to get traps from. Using a port tool, I can see that UDP 162 is listening as expected and its the System Center Management Host Process that is running the
process. We have tried having SNMP installed, but disabled, installed and running, and uninstalled. Currently we have the SNMP service installed and running. The SNMP Trap Service is NOT installed.
Data Validation
Using Wireshark running on the SCOM box I have been able to validate the OIDs we are searching for are hitting the SCOM server. I installed an SNMP Trap generator and Receiver on my local machine as well as Jalasoft SNMP Simulator. I was able
to discover my local machine as a network device and if I send a TRAP from the TRAP generator on my local machine to the receiver on my local machine I can validate the data is coming through ok.
What has been done on SCOM side
The simplest place to look for data is with an Event Collection Rule and then an Event View Monitor. We have set up an Event Based Monitor to search for an OID that I know to be accurate and then I set up an Event monitor to look for
anything hitting that Collection Rule. The Event monitor showed nothing so we changed the EVent Monitor to look for anything that hit Node which should show any SNMP traps that have hit from network devices. No results.
We tried to run WFAnalyzer from the 2007R2 Authoring Console, but it wont run against 2012 and from what I have found the 2012 edition doesnt exist anywhere yet.
So has anyone succesfully received a SNMP TRAP into SCOM 2012?

Hi,
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as "Answered" as the previous steps should be helpful for many similar scenarios.
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
Thanks,
Yog Li
TechNet Community Support
How could you possibly mark this as answered? No answer was given, it was quiet for a couple of days including one of which was a holiday in the US. The previous steps are NOT helpful. The question remains, Does anyone have it working?
People have given troubleshooting advice, but nobody has actually answered the simple question. Do they have it actually WORKING?

How does the verizon wifi work? Do you pay monthly?

I want to buy the new iPad with retina display as a gift, but how does this verizon wifi work? Do you pay monthly or have to call Verizon?

You're post is a little confusing. WiFi signals are not done through Verizon unless you are talking about using a Verizon MiFi hotspot such as this http://www.verizonwireless.com/b2c/store/controller?&item=phoneFirst&action=view PhoneOverviewByDevice&deviceCategoryId=13&cmp=KNC-58700000028195084&zipRdr=y.
4G wireless cell signals are done through Verizon. WiFi comes from places such as your home wireless network, or WiFi hotspots at places like Starbucks, restaurants, pubs, etc.
If you are asking about Verizon's wireless cell service, it's $20 a month for 1 gig of data, $30 a month for 2 gigs of data, or $50 a month for 5 gigs of data.

The wi-fi button on my iPad 2 is not functioning. I have tried resetting the network, worked for 5 minutes. Am not able to connect to internet to reset to factory. What else can I do?

The wi-fi button on my iPad 2 is not functioning. I have tried resetting the network, worked for 5 minutes. Am not able to connect to internet to reset to factory. What else can I do?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Why does AirPort Extreme stop working when I plug in a USB hard drive?

Why does Airport Extreme stop working when I plug in a USB hard drive? The USB drive has its own power supply. I've tried isolating the hard drive from Airport using a powered USB hub to no avail.

The USB port on the AirPort Extreme is borderline as far as its ability to supply adequate power to a hard drive. Another way of saying the same thing is that this is not a high power USB port, like you would find on a computer.
Your 2TB drive likely requires a bit more current than the USB port on the AirPort Extreme can supply. It is also possible that the drive's firmware may not support a network USB connection....only a "local" connection to a computer. Check with Seagate support on that possibility.
Try using a powered USB hub with the 2TB drive....and make sure that the drive is formatted correctly in Mac OS Extended (Journaled) or FAT32....which the AirPort Extreme USB port can accept.

Why does my ipad air work with my netgear routerWGT624

why does my ipad air work with my netgear routerWGT 624

Why wouldn't it work with that router?
Or are you really asking why doesn't it work with that router? If that's your question try rebooting the router by powering it off for thirty seconds then turning it back on.
If this doesn't help please explain in more detail what happens when your iPad attempt to connect to your Wi-Fi network.

HT4993 why does my internet not work when not connected to wifi?

why does my internet not work when not connected to wifi

Hi farmgirl0812,
Thanks for using Apple Support Communities. This article has steps to try if you are unable to connect to a cellular network:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
- Ari

Does Telstras 4g Network work in bunbury WA

Similar Messages

Maybe you are looking for