Does the 10.0.2 update work?

Does the 10.0.2 update work?
I tried the update to 10.0.2 when it was released but the update failed to work.
Adobe Application Manager gave the following dialogue:
"Some updates failed to install. Update is not applicable".
Apple's Get Info for the application says version 1.0.1 and the Adobe about box says version 10.0.1.19
I ran "updates" from the After Effects help menu again this morning but the response is "no updates available"
I have the retail copy of CS5 and used the retail version of the update.
Pip

Someone's going to say it, so it may as well be me...
This is a user-to-user group, not an official Adobe technical support outlet. It is my understanding that Adobe people such as Todd contribute as part of an unofficial help policy, and we all appreciate the input.
So sorry if you think these very useful fora are shoddy and didn't meet your expectations!

Similar Messages

How does the Concurrent Access License (CAL) work.

Description from Google: How does the Concurrent Access License (CAL) work? Xcelsius Engage Server CALs allow for concurrent live data updates inside Xcelsius dashboards. Every time an end-user triggers a Web service inside an Xcelsius dashboard to retrieve live data, a CAL is consumed for a period of 5 minutes. For that period, in a five CAL deployment for example, there will be only four CALs left for consumption. A five CAL deployment could support up to 25 users and additional CALs can be added to support a larger deployment.
My question is as follows:
How a five CAL deployment could support up to 25 users and what does it mean. In the first line it is saying that each CAL for a web service is consumed for a period of 5 minutes and how come it can support 25 users concurrently. Did it mean 25 web service connections inside a swf flash file or 25 different users to access a single web service through swf flash.

The "Set cost controls" concurrent program is used in R12 to mass update the cost control fields on item costs.
The cost control region is found by going to Cost management >Item costs > Item Costs
The concurrent program lets you specify which items /costs should be updated by using various parameters such as cost type, item range, category range etc.
And you can specify the source for the new cost control data and the new value for the fields.
Hope this answers your question,
Sandeep Gandhi

Does the Pocket Projector by Brookstone work with the iphone 5?

Does the Pocket Projector by Brookstone work with the iphone 5 ?

I have the Brookstone DLP Pico projector. I purchased it from EBay not too long ago. It worked before with the previous version of Apples iOS. I would view netflix, youtube, and videos.. I have an iphone4.
Now with the latest update to ios7, tried it last evening with netflix and youtube, it does not work at all! This is rediculous, restricting access to something we had access to before

HT6114 Does the 10.9.2 update fix the issue on 2011 macs where projectors with HDMI are not recognized via thunderbolt adapter?

Hi Mac,
Does the 10.9.2 update fix the issue on 2011 macs where projectors with HDMI are not recognized via thunderbolt adapter?
Thanks in advance,
Ricardo Arguelles

Sordidloam wrote:
So to be clear, this issue occurs on any input with the Denon Receiver. Occurs from both HDMI out and MiniDisplay Port out. Goes away when we reinstall the OS and update it to 10.9.2. Comes back as soon as we update to 10.9.3.
Cheers
MLE
Have you been able to use the Mac Mini directly attached to the plasma/LCD/projector with out going through the Denon AVR? Even with 10.9.3 installed?
I have a Pioneer AVR and I have the Mac attached via a HDMI to HDMI and all is working for me. Can your Denon do some upscaling? Some AVR, like my VSX-53 can change the scaling of the input video. Meaning if I still had my Apple TV 2 which outputs 720P only, can be upscaled in my AVR to 1080i or 1080P or even 24fps. Heck, I could even plug in an old style Red, White, Yellow cable and upscale it to 1080P and output it HDMI.
I am wondering if your Denon is able to do that and it might be set wrong. Check the owners manual for such settings. Even the plasma/LCD/project could be doing the upscaling too. So check that too.
KOT

Does the Palm Pilot Modem (10201U) work with the IIIc or IIIxe?

Does the Palm Pilot Modem (10201U) work with the IIIC or IIIxe? On the box, it just says the III.
Thanks!
Post relates to: Centro (Sprint)

I believe I used the Palm Modem successfully with my IIIc.
Updating the OS on the device to 4.1 really helped a lot!
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Why does the ipad 2 speaker stopped working after upgrading to ios 8

WWhy does the iPad 2 speaker stopped working after upgrading to ios 8 why plz respond

Hi A_S85,
It appears your iPhone has an issue relating to sound. The following article may help you find a solution:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
Follow these steps and test the sound after each one.
Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
Restart your device.
Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
Go to Settings > Bluetooth and turn off Bluetooth.
If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
If the device is in a case, make sure that the case doesn't block the speaker.
Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
Update your device to the latest version of iOS.
If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

HT1689 since doing the 7.0.4 update i notice that my mobile data has doubled and i am running out of data mid month. I've disabled apps s not many running. Any suggestions?

since doing the 7.0.4 update i notice that my mobile data has doubled and i am running out of data mid month. I've disabled apps s not many running. Any suggestions?

I am having the same issue even with the newer 7.1. I have a 1-100 KB data push on both my husdand's and my phone every hour on the hour (i.e. my will be at :23 of the hour and his will be at :13 of the hour and it will change). This is whether we are on a WIFI and with all apps, background refreshes, push notifications, etc turned OFF.

Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

If the Belkin supports the A2DP (Stereo Bluetooth) profile then it will work.

Does the Epson Expression 1600 Scanner work in SL?

Does the Epson Expression 1600 Scanner work in Snow Leopard? Did you have to install Rosetta to get it to work?
I use my MacBook Pro for business and it is vital that everything I use works properly. From what I've seen on these posts, I may be waiting a long while to upgrade.

People who need to SCAN & PRINT without a compatible driver from their manufacturer can use Apple's very basic "PRINT & SCAN" utility in System Preferences:
Click the Apple menu ( ), and then click System Preferences .
Click Print & Scan ( ).
Click Scan , and then click Open Scanner .
Click Show Details . The details of the scan display, including options to modify scan settings such as output type.Figure 2: Example of the Show Details scanning screen
Change any settings as necessary, and then click Scan .
Hope this helps

Does the iPad Wi-Fi+3G work like the Wi-Fi model if I have no 3G data plan?

Hi all!
Does the iPad Wi-Fi+3G work like the Wi-Fi model if I don't have any 3G data plan subscription?

Yes it does. Added bonus: You get GPS (which the WiFi model doesn't have but which works without a SIM card).

How well does the wireless "Wild Charge" pad work with the iPhone?

how well does the wireless "Wild Charge" pad work with the iPhone?

I have tried similar things, and no, it has not become corrupted. So it should be fine

Does the 10.5.7 update address command+f finder search issues?

Does the 10.5.7 update address command+f finder search issues?
Search has been horrible under 10.5 in that it does not reliably find FOLDERS on network drives, only file names.
Even when I am looking directly at a folder and I search for it will not appear in the command+f window.
Also the stupidity of not allowing a specific search location.
Has this been addressed? I have, at any given time, 3-4 mounted servers.
I do not have a choice now to search a specific hard drive.
10.4.11 gave me the option under "OTHERS" to select a specific place to search.
The only choice I have in 10.5.2 is "SHARED". Which searches all drives when I only want to search one. Nor do I have a choice of searching just one of my two internal drives.
I talked with Chris in apple engineering several months ago, who acknowledged that search problems are a known issue under 10.5 and this was being addressed but have not heard any more. I don't want to download an update unless these broken search issues have been fixed. This is a production machine and I cannot have downtime in the Dept.

Have you filed a bug report or enhancement request with Apple?
http://bugreport.apple.com/

How does the MDKP table gets updates

Dear PP Guru's,
I am new to SAP PP,
We have a query that how does the MDKP table gets updates,
Some time If we create new material by coping the material which is showing in table MDKP,
But new material is not showing in table MDKP,
Based on table MDKP we are fetching some data, due to above problem we are not able to fetch the data for some materials,
Please suggest what could be the reason,
Any help will be highly appreciated,
Thanks in advance,
Sachin.

Thanks Thaila,
I have checked the same by doing MRP through MD02 & the entry is getting update in MDKP,
But for some of our materials MRP (MD02) is done earlier, but these materials are not showing in MDKP,
Please suggest, when the entries in MDKP are removed, are there any conditions for removing the entries from MDKP.
please pour some light on the issue,
Thanks once again,
Sachin.

I run 3 email accounts on Mac Mail, all 3 disappeared after doing the latest OS X update. I have tried adding the accounts back but no mail appears. Help!

I run 3 email accounts on Mac Mail, all 3 disappeared after doing the latest OS X update. I have tried adding the accounts back but no mail appears. Help!

The mailbox list is divided into categories with headings in caps, such as ON MY MAC. When you hover the cursor over one of those headings (except for MAILBOXES), you should see the word Show or Hide on the right. Click Show. The MAILBOXES category can't be hidden.
In each category, the mailboxes are arranged in groups, such as Inbox. To the left of each group is a small disclosure triangle. If the triangle points to the right, click it so that it points down.

How does the search functon/input box work?

How does the search functon/input box work?
Hi
my level is beginner
there is a search box on the upper right hand on this page
frames in gey ?
how does this work.
does this search in the database?
if i would want to create this in an application
what can i do ?
are there CF examples??

Thanks
search against a database : Are there a function of Cf ta
tags/code to do this? is this CFquery / and Cfoutput?
or
do a Verity search of a collection. How is this dont by? CF
submit a search to an external search engine like Google.
oh, is this when a page has a search and when the user types in
there text in the input box it automatically goes to the google
search. any articles on how to do this in CF
Thanks

Does the 10.0.2 update work?

Similar Messages

Maybe you are looking for