Does the 2.1 web policy agent for Windows 2003 work on a 64 bit OS ?
Does the 2.1 web policy agent for Windows 2003 work on a 64 bit OS ?
I have a customer having a world of issues getting the agent to start.
Jeff Courtade
No. 64bit support is not there for 2.1 agents on Windows.
-Subba
Similar Messages
-
EM12c and GC11g Agent for Windows 2003 R2 64 bit
Hello Everyone,
I have setup a GC 11g on Oracle Linux 64 bit to monitor the servers in the data center.
The problem is, I'm having difficulties installing an agent in Windows 2003 R2 64 bit.
Few months ago when I checked the certification matrix for GC 11g Agent, I saw that it didn't support Windows 2003 R2 64 bit platform.
Apparently, now I cannot choose 11.1.0.1.0 in the certification matrix anymore and have left with 12.1.0.1.0 and 12.1.0.2.0.
However, even the 12c also doesn't put Windows 2003 R2 64 bit platform in the list of supported OS platform.
The strange thing is Windows 2003 R2 32 bit is supported.
So, my questions are:
1. Is there any of you who was successful in implementing the EM12c or GC11g agent on Windows 2003 R2 64 bit?
2. If you are successful, did you experiencing any problem after the installation and during the installation phase?
3. Can I use 10.2.0.5.0 agent which is supported to be installed on Windows 2003 R2 64 bit and managed by either GC11g or EM12c?
Thank you,
Adhika
Edited by: adhika on Oct 13, 2012 1:09 PMHi Adhika,
Windows 2003 R2 is not supported.
The only supported platforms are :
XP,Vista,7,2008 R2,2008,2003
Even 10.2.0.5 agent is not supported.
The only supported platforms are:
2008R2
Regards,
Venkat
Edited by: venkata thiruveedhi on Oct 14, 2012 3:29 AM -
Does the Boot Camp 2.1 Update For Vista 64 Work With Windows 7 Ultimate 64
??
It is. Win7 Ultimate64 is running on it right now, with the Boot Camp 64 drivers from the original boot camp drivers on the macbook CD.
It IS the Snow Leopard Boot Camp - is that 2.1 already ? I can't find a version number with it... -
Web Policy Agent 2.1 for Apache 1.3.27 with Identity Server 6.1
Web Policy Agent 2.1 for Apache 1.3.27 with Identity Server 6.1
Does anybody has a working combination of the above ? I get a ID login page and after that I always get a access denied page. I get this exception on the agent logs:
2004-10-14 16:28:00.917 Warning 6347:c1818 PolicyAgent: in get_cookie: no cooki
e in ap_table
2004-10-14 16:28:01.895 Warning 6359:c1818 PolicyAgent: Invalid URL for propert
y (com.sun.am.policy.agents.accessDeniedURL) specified
2004-10-14 16:28:56.742 Warning 6349:c1818 PolicyAgent: am_web_is_access_allowe
d(http://xx.xx.xx.net:8080/, GET) denying access: status = access de
nied (20)
2004-10-14 16:28:56.743 128 6349:c1818 RemoteLog: User testuser1 was denie
d access to http://xx.xx.xx.net:8080/.
2004-10-14 16:28:56.831 -1 6349:c1818 PolicyAgent: URL Access Agent: acces
s denied to testuser1
We can ignore Invalid URL property part because its just looking for a custom url in place there. I have cookies enabled in my browser. I even turned on the prompt option. No luck yet.
Any suggestions would be of great help.
Thanks,
Sunil.From your description, since the agent installs file with a different JRE, I would suspect it has something to do with the availability of JCE provider in the first JRE. By default, WebSphere's JRE is equipped with IBM JCE provider which is what the agent uses to encrypt the necessary
information. If this provider is not configured correctly it could result in the error that you are seeing. Please check the WebSphere installation and make sure that the JRE used by it has the necessary IBM JCE provider configured. The java.security file for this should contain something like:
security.provider.1=sun.security.provider.Sun
security.provider.2=com.ibm.crypto.provider.IBMJCE
security.provider.3=com.ibm.jsse.IBMJSSEProvider
security.provider.4=com.ibm.security.cert.IBMCertPath
security.provider.5=com.ibm.crypto.pkcs11.provider.IBMPKCS11
Also, make sure that when you are installing the agent you specify the Java Home as prompted by the agent to point to the location where this JRE is installed. Typically this is under WebSphere/AppServer/java directory. HTH, Jerry -
No log for am policy agent for iis6
Hello!
Im trying to get Policy Agent for IIS to run on my Win Srv 2003 with IIS6 and Sharepoint Services.
I am running the OpenSSO version of Access Manager.
I have installed the agent and done the initial cofiguration.
When i try to browse the resource i get a login prompt (IIS Basic Auth)and cannot login followed by "Not Authorized 401.3"
I should get redirected to the AM Login page, shouldn't I?
I tried to look for answers in the log file but the /debug/<id> directory i empty.
Anyone know what to do?
The amAgent.properties file:
# $Id: AMAgent.properties,v 1.103 2005/09/19 22:08:34 madan Exp $
# The syntax of this file is that of a standard Java properties file,
# see the documentation for the java.util.Properties.load method for a
# complete description. (CAVEAT: The SDK in the parser does not currently
# support any backslash escapes except for wrapping long lines.)
# All property names in this file are case-sensitive.
# NOTE: The value of a property that is specified multiple times is not
# defined.
# WARNING: The contents of this file are classified as an UNSTABLE
# interface by Sun Microsystems, Inc. As such, they are subject to
# significant, incompatible changes in any future release of the
# software.
# The name of the cookie passed between the Access Manager
# and the SDK.
# WARNING: Changing this property without making the corresponding change
# to the Access Manager will disable the SDK.
com.sun.am.cookie.name = iPlanetDirectoryPro
# The URL for the Access Manager Naming service.
com.sun.am.naming.url = http://login.lta.mil.se:8080/opensso/namingservice
# The URL of the login page on the Access Manager.
com.sun.am.policy.am.login.url = http://login.lta.mil.se:8080/opensso/UI/Login
# Name of the file to use for logging messages.
com.sun.am.policy.agents.config.local.log.file = C:/Sun/Access_Manager/Agents/2.2/debug/Identifier_1414639615/amAgent
# This property is used for Log Rotation. The value of the property specifies
# whether the agent deployed on the server supports the feature of not. If set
# to false all log messages are written to the same file.
com.sun.am.policy.agents.config.local.log.rotate = true
# Name of the Access Manager log file to use for logging messages to
# Access Manager.
# Just the name of the file is needed. The directory of the file
# is determined by settings configured on the Access Manager.
com.sun.am.policy.agents.config.remote.log = amAuthLog.sharepoint.lta.mil.se.80
# Set the logging level for the specified logging categories.
# The format of the values is
# <ModuleName>[:<Level>][,<ModuleName>[:<Level>]]*
# The currently used module names are: AuthService, NamingService,
# PolicyService, SessionService, PolicyEngine, ServiceEngine,
# Notification, PolicyAgent, RemoteLog and all.
# The all module can be used to set the logging level for all currently
# none logging modules. This will also establish the default level for
# all subsequently created modules.
# The meaning of the 'Level' value is described below:
# 0 Disable logging from specified module*
# 1 Log error messages
# 2 Log warning and error messages
# 3 Log info, warning, and error messages
# 4 Log debug, info, warning, and error messages
# 5 Like level 4, but with even more debugging messages
# 128 log url access to log file on AM server.
# 256 log url access to log file on local machine.
# If level is omitted, then the logging module will be created with
# the default logging level, which is the logging level associated with
# the 'all' module.
# for level of 128 and 256, you must also specify a logAccessType.
# *Even if the level is set to zero, some messages may be produced for
# a module if they are logged with the special level value of 'always'.
com.sun.am.log.level = 5
# The org, username and password for Agent to login to AM.
com.sun.am.policy.am.username = UrlAccessAgent
com.sun.am.policy.am.password = PN4rEZ1uhx1404ivWY6HPQ==
# Name of the directory containing the certificate databases for SSL.
com.sun.am.sslcert.dir = C:/Sun/Access_Manager/Agents/2.2/iis6/cert
# Set this property if the certificate databases in the directory specified
# by the previous property have a prefix.
com.sun.am.certdb.prefix =
# Should agent trust all server certificates when Access Manager
# is running SSL?
# Possible values are true or false.
com.sun.am.trust_server_certs = true
# Should the policy SDK use the Access Manager notification
# mechanism to maintain the consistency of its internal cache? If the value
# is false, then a polling mechanism is used to maintain cache consistency.
# Possible values are true or false.
com.sun.am.notification.enable = true
# URL to which notification messages should be sent if notification is
# enabled, see previous property.
com.sun.am.notification.url = http://sharepoint.lta.mil.se:80/amagent/UpdateAgentCacheServlet?shortcircuit=false
# This property determines whether URL string case sensitivity is
# obeyed during policy evaluation
com.sun.am.policy.am.url_comparison.case_ignore = true
# This property determines the amount of time (in minutes) an entry
# remains valid after it has been added to the cache. The default
# value for this property is 3 minutes.
com.sun.am.policy.am.polling.interval=3
# This property allows the user to configure the User Id parameter passed
# by the session information from the access manager. The value of User
# Id will be used by the agent to set the value of REMOTE_USER server
# variable. By default this parameter is set to "UserToken"
com.sun.am.policy.am.userid.param=UserToken
# Profile attributes fetch mode
# String attribute mode to specify if additional user profile attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user profile attributes will be introduced.
# HTTP_HEADER - additional user profile attributes will be introduced into
# HTTP header.
# HTTP_COOKIE - additional user profile attributes will be introduced through
# cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.profile.attribute.fetch.mode=NONE
# The user profile attributes to be added to the HTTP header. The
# specification is of the format ldap_attribute_name|http_header_name[,...].
# ldap_attribute_name is the attribute in data store to be fetched and
# http_header_name is the name of the header to which the value needs
# to be assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.profile.attribute.map=cn|common-name,ou|organiz ational-unit,o|organization,mail|email,employeenumber|employee-number,c|country
# Session attributes mode
# String attribute mode to specify if additional user session attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user session attributes will be introduced.
# HTTP_HEADER - additional user session attributes will be introduced into HTTP header.
# HTTP_COOKIE - additional user session attributes will be introduced through cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.session.attribute.fetch.mode=NONE
# The session attributes to be added to the HTTP header. The specification is
# of the format session_attribute_name|http_header_name[,...].
# session_attribute_name is the attribute in session to be fetched and
# http_header_name is the name of the header to which the value needs to be
# assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.session.attribute.map=
# Response Attribute Fetch Mode
# String attribute mode to specify if additional user response attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user response attributes will be introduced.
# HTTP_HEADER - additional user response attributes will be introduced into
# HTTP header.
# HTTP_COOKIE - additional user response attributes will be introduced through
# cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.response.attribute.fetch.mode=NONE
# The response attributes to be added to the HTTP header. The specification is
# of the format response_attribute_name|http_header_name[,...].
# response_attribute_name is the attribute in policy response to be fetched and
# http_header_name is the name of the header to which the value needs to be
# assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.response.attribute.map=
# The cookie name used in iAS for sticky load balancing
com.sun.am.policy.am.lb.cookie.name = GX_jst
# indicate where a load balancer is used for Access Manager
# services.
# true | false
com.sun.am.load_balancer.enable = false
####Agent Configuration####
# this is for product versioning, please do not modify it
com.sun.am.policy.agents.config.version=2.2
# Set the url access logging level. the choices are
# LOG_NONE - do not log user access to url
# LOG_DENY - log url access that was denied.
# LOG_ALLOW - log url access that was allowed.
# LOG_BOTH - log url access that was allowed or denied.
com.sun.am.policy.agents.config.audit.accesstype = LOG_BOTH
# Agent prefix
com.sun.am.policy.agents.config.agenturi.prefix = http://sharepoint.lta.mil.se:80/amagent
# Locale setting.
com.sun.am.policy.agents.config.locale = en_US
# The unique identifier for this agent instance.
com.sun.am.policy.agents.config.instance.name = unused
# Do SSO only
# Boolean attribute to indicate whether the agent will just enforce user
# authentication (SSO) without enforcing policies (authorization)
com.sun.am.policy.agents.config.do_sso_only = true
# The URL of the access denied page. If no value is specified, then
# the agent will return an HTTP status of 403 (Forbidden).
com.sun.am.policy.agents.config.accessdenied.url =
# This property indicates if FQDN checking is enabled or not.
com.sun.am.policy.agents.config.fqdn.check.enable = true
# Default FQDN is the fully qualified hostname that the users should use
# in order to access resources on this web server instance. This is a
# required configuration value without which the Web server may not
# startup correctly.
# The primary purpose of specifying this property is to ensure that if
# the users try to access protected resources on this web server
# instance without specifying the FQDN in the browser URL, the Agent
# can take corrective action and redirect the user to the URL that
# contains the correct FQDN.
# This property is set during the agent installation and need not be
# modified unless absolutely necessary to accommodate deployment
# requirements.
# WARNING: Invalid value for this property can result in the Web Server
# becoming unusable or the resources becoming inaccessible.
# See also: com.sun.am.policy.agents.config.fqdn.check.enable,
# com.sun.am.policy.agents.config.fqdn.map
com.sun.am.policy.agents.config.fqdn.default = sharepoint.lta.mil.se
# The FQDN Map is a simple map that enables the Agent to take corrective
# action in the case where the users may have typed in an incorrect URL
# such as by specifying partial hostname or using an IP address to
# access protected resources. It redirects the browser to the URL
# with fully qualified domain name so that cookies related to the domain
# are received by the agents.
# The format for this property is:
# com.sun.am.policy.agents.config.fqdn.map = [invalid_hostname|valid_hostname][,...]
# This property can also be used so that the agents use the name specified
# in this map instead of the web server's actual name. This can be
# accomplished by doing the following.
# Say you want your server to be addressed as xyz.hostname.com whereas the
# actual name of the server is abc.hostname.com. The browsers only knows
# xyz.hostname.com and you have specified polices using xyz.hostname.com at
# the Access Manager policy console, in this file set the mapping as
# com.sun.am.policy.agents.fqdn.map = valid|xyz.hostname.com
# Another example is if you have multiple virtual servers say rst.hostname.com,
# uvw.hostname.com and xyz.hostname.com pointing to the same actual server
# abc.hostname.com and each of the virtual servers have their own policies
# defined, then the fqdnMap should be defined as follows:
# com.sun.am.policy.agents.fqdn.map = valid1|rst.hostname.com,valid2|uvw.hostname.com,valid3|xyz.hostname.com
# WARNING: Invalid value for this property can result in the Web Server
# becoming unusable or the resources becoming inaccessible.
com.sun.am.policy.agents.config.fqdn.map =
# Cookie Reset
# This property must be set to true, if this agent needs to
# reset cookies in the response before redirecting to
# Access Manager for Authentication.
# By default this is set to false.
# Example : com.sun.am.policy.agents.config.cookie.reset.enable=true
com.sun.am.policy.agents.config.cookie.reset.enable=false
# This property gives the comma separated list of Cookies, that
# need to be included in the Redirect Response to Access Manager.
# This property is used only if the Cookie Reset feature is enabled.
# The Cookie details need to be specified in the following Format
# name[=value][;Domain=value]
# If "Domain" is not specified, then the default agent domain is
# used to set the Cookie.
# Example : com.sun.am.policy.agents.config.cookie.reset.list=LtpaToken,
# token=value;Domain=subdomain.domain.com
com.sun.am.policy.agents.config.cookie.reset.list=
# This property gives the space separated list of domains in
# which cookies have to be set in a CDSSO scenario. This property
# is used only if CDSSO is enabled.
# If this property is left blank then the fully qualified cookie
# domain for the agent server will be used for setting the cookie
# domain. In such case it is a host cookie instead of a domain cookie.
# Example : com.sun.am.policy.agents.config.cookie.domain.list=.sun.com .iplanet.com
com.sun.am.policy.agents.config.cookie.domain.list=
# user id returned if accessing global allow page and not authenticated
com.sun.am.policy.agents.config.anonymous_user=anonymous
# Enable/Disable REMOTE_USER processing for anonymous users
# true | false
com.sun.am.policy.agents.config.anonymous_user.enable=false
# Not enforced list is the list of URLs for which no authentication is
# required. Wildcards can be used to define a pattern of URLs.
# The URLs specified may not contain any query parameters.
# Each service have their own not enforced list. The service name is suffixed
# after "# com.sun.am.policy.agents.notenforcedList." to specify a list
# for a particular service. SPACE is the separator between the URL.
com.sun.am.policy.agents.config.notenforced_list = SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/UI/* SERVER_PROTO://SERVER_HOST:SERVER_PORTCONSOLE_DEPLOY_URI/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/login_images/* SERVER_PROTO://SERVER_HOST:SERVER_PORT/docs* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/namingservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/sessionservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/loggingservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/profileservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/policyservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/config* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/js/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/css/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/authservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLAwareServlet SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLSOAPReceiver SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLPOSTProfileServlet
# Boolean attribute to indicate whether the above list is a not enforced list
# or an enforced list; When the value is true, the list means enforced list,
# or in other words, the whole web site is open/accessible without
# authentication except for those URLs in the list.
com.sun.am.policy.agents.config.notenforced_list.invert = false
# Not enforced client IP address list is a list of client IP addresses.
# No authentication and authorization are required for the requests coming
# from these client IP addresses. The IP address must be in the form of
# eg: 192.168.12.2 1.1.1.1
com.sun.am.policy.agents.config.notenforced_client_ip_list =
# Enable POST data preservation; By default it is set to false
com.sun.am.policy.agents.config.postdata.preserve.enable = false
# POST data preservation : POST cache entry lifetime in minutes,
# After the specified interval, the entry will be dropped
com.sun.am.policy.agents.config.postcache.entry.lifetime = 10
# Cross-Domain Single Sign On URL
# Is CDSSO enabled.
com.sun.am.policy.agents.config.cdsso.enable=false
# This is the URL the user will be redirected to for authentication
# in a CDSSO Scenario.
com.sun.am.policy.agents.config.cdcservlet.url =
# Enable/Disable client IP address validation. This validate
# will check if the subsequent browser requests come from the
# same ip address that the SSO token is initially issued against
com.sun.am.policy.agents.config.client_ip_validation.enable = false
# Below properties are used to define cookie prefix and cookie max age
com.sun.am.policy.agents.config.profile.attribute.cookie.prefix = HTTP_
com.sun.am.policy.agents.config.profile.attribute.cookie.maxage = 300
# Logout URL - application's Logout URL.
# This URL is not enforced by policy.
# if set, agent will intercept this URL and destroy the user's session,
# if any. The application's logout URL will be allowed whether or not
# the session destroy is successful.
com.sun.am.policy.agents.config.logout.url=
# Any cookies to be reset upon logout in the same format as cookie_reset_list
com.sun.am.policy.agents.config.logout.cookie.reset.list =
# By default, when a policy decision for a resource is needed,
# agent gets and caches the policy decision of the resource and
# all resource from the root of the resource down, from the Access Manager.
# For example, if the resource is http://host/a/b/c, the the root of the
# resource is http://host/. This is because more resources from the
# same path are likely to be accessed subsequently.
# However this may take a long time the first time if there
# are many many policies defined under the root resource.
# To have agent get and cache the policy decision for the resource only,
# set the following property to false.
com.sun.am.policy.am.fetch_from_root_resource = true
# Whether to get the client's hostname through DNS reverse lookup for use
# in policy evaluation.
# It is true by default, if the property does not exist or if it is
# any value other than false.
com.sun.am.policy.agents.config.get_client_host_name = true
# The following property is to enable native encoding of
# ldap header attributes forwarded by agents. If set to true
# agent will encode the ldap header value in the default
# encoding of OS locale. If set to false ldap header values
# will be encoded in UTF-8
com.sun.am.policy.agents.config.convert_mbyte.enable = false
#When the not enforced list or policy has a wildcard '*' character, agent
#strips the path info from the request URI and uses the resulting request
#URI to check against the not enforced list or policy instead of the entire
#request URI, in order to prevent someone from getting access to any URI by
#simply appending the matching pattern in the policy or not enforced list.
#For example, if the not enforced list has the value http://host/*.gif,
#stripping the path info from the request URI will prevent someone from
#getting access to http://host/index.html by using the URL http://host/index.html?hack.gif.
#However when a web server (for exmample apache) is configured to be a reverse
#proxy server for a J2EE application server, path info is interpreted in a different
#manner since it maps to a resource on the proxy instead of the app server.
#This prevents the not enforced list or policy from being applied to part of
#the URI below the app serverpath if there is a wildcard character. For example,
#if the not enforced list has value http://host/webapp/servcontext/* and the
#request URL is http://host/webapp/servcontext/example.jsp the path info
#is /servcontext/example.jsp and the resulting request URL with path info stripped
#is http://host/webapp, which will not match the not enforced list. By setting the
#following property to true, the path info will not be stripped from the request URL
#even if there is a wild character in the not enforced list or policy.
#Be aware though that if this is set to true there should be nothing following the
#wildcard character '*' in the not enforced list or policy, or the
#security loophole described above may occur.
com.sun.am.policy.agents.config.ignore_path_info = false
# Override the request url given by the web server with
# the protocol, host or port of the agent's uri specified in
# the com.sun.am.policy.agents.agenturiprefix property.
# These may be needed if the agent is sitting behind a ssl off-loader,
# load balancer, or proxy, and either the protocol (HTTP scheme),
# hostname, or port of the machine in front of agent which users go through
# is different from the agent's protocol, host or port.
com.sun.am.policy.agents.config.override_protocol =
com.sun.am.policy.agents.config.override_host =
com.sun.am.policy.agents.config.override_port = true
# Override the notification url in the same way as other request urls.
# Set this to true if any one of the override properties above is true,
# and if the notification url is coming through the proxy or load balancer
# in the same way as other request url's.
com.sun.am.policy.agents.config.override_notification.url =
# The following property defines how long to wait in attempting
# to connect to an Access Manager AUTH server.
# The default value is 2 seconds. This value needs to be increased
# when receiving the error "unable to find active Access Manager Auth server"
com.sun.am.policy.agents.config.connection_timeout =
# Time in milliseconds the agent will wait to receive the
# response from Access Manager. After the timeout, the connection
# will be drop.
# A value of 0 means that the agent will wait until receiving the response.
# WARNING: Invalid value for this property can result in
# the resources becoming inaccessible.
com.sun.am.receive_timeout = 0
# The three following properties are for IIS6 agent only.
# The two first properties allow to set a username and password that will be
# used by the authentication filter to pass the Windows challenge when the Basic
# Authentication option is selected in Microsoft IIS 6.0. The authentication
# filter is named amiis6auth.dll and is located in
# Agent_installation_directory/iis6/bin. It must be installed manually on
# the web site ("ISAPI Filters" tab in the properties of the web site).
# It must also be uninstalled manually when unintalling the agent.
# The last property defines the full path for the authentication filter log file.
com.sun.am.policy.agents.config.iis6.basicAuthentication.username =
com.sun.am.policy.agents.config.iis6.basicAuthentication.password =
com.sun.am.policy.agents.config.iis6.basicAuthentication.logFile = C:/Sun/Access_Manager/Agents/2.2/debug/Identifier_1414639615/amAuthFilterIf the agent doesnot start properly you would always get redirected to com.sun.am.policy.agents.config.accessdenied.url , if thats not specified you will get a 403.
For the agent itself check that the naming.url is correct. the agent username and passwords are correct, and see that the user has priviledges to write to the agent log files. Apart from these post the windows event logs. -
Authorization issue with J2EE Policy Agent for AS7
Following the documentaion I have created a simple J2EE application with a servlet and 2 jsp's. The 2 JSP's customer.jsp and admin.jsp are mapped to /customer and /admin. The entire web application is subject to a filter like:
<filter>
<filter-name>Agent</filter-name>
<display-name>Agent</display-name>
<description>SunTM ONE Idenitity Server Policy Agent for SunTM ONE Application Server 7.0</description>
<filter-class>com.sun.amagent.as.filter.AgentFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>Agent</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
The two resources /customer and /admin are subjected security constraints like:
<security-constraint>
<web-resource-collection>
<web-resource-name>col2</web-resource-name>
<url-pattern>/customer</url-pattern>
<http-method>GET</http-method>
<http-method>POST</http-method>
</web-resource-collection>
<auth-constraint>
<role-name>customer</role-name>
</auth-constraint>
<user-data-constraint>
<transport-guarantee>NONE</transport-guarantee>
</user-data-constraint>
</security-constraint>
The role-to-principal mapping is done in the sun-web.xml like:
<security-role-mapping>
<role-name>customer</role-name>
<group-name>customer</group-name>
<principal-name>amAdmin</principal-name>
</security-role-mapping>
<security-role-mapping>
<role-name>admin</role-name>
<group-name>admin</group-name>
<principal-name>amAdmin</principal-name>
</security-role-mapping>
Two roles 'customer' and admin are created via the identity server console and users are added to these roles.
The application deploys OK, when the app is accesed the user is redirected to the identity server and is authenticated fine. The user is directed to the main servlet and is allowed to access the the two jsp's. All is good till now, when the user access one these links say /customer, access is denied (403). The server logs prints out:
[21/May/2003:10:34:24] FINE ( 6036): servletPath = /customer
[21/May/2003:10:34:24] FINE ( 6036): pathInfo = null
[21/May/2003:10:34:24] FINE ( 6036): SingleSignOn[ids]: Process request for '/idssample/customer'
[21/May/2003:10:34:24] FINE ( 6036): SingleSignOn[ids]: Checking for SSO cookie
[21/May/2003:10:34:24] FINE ( 6036): SingleSignOn[ids]: SSO cookie is not present
[21/May/2003:10:34:24] FINE ( 6036): Authenticator[idssample]: Security checking request GET /idssample/customer
[21/May/2003:10:34:24] FINE ( 6036): Authenticator[idssample]: We have cached auth type PROGRAMMATIC for principal amAdmin
[21/May/2003:10:34:24] FINE ( 6036): Authenticator[idssample]: Checking constraint 'SecurityConstraint[col2]' against GET /customer --> false
[21/May/2003:10:34:24] FINE ( 6036): Authenticator[idssample]: Checking constraint 'SecurityConstraint[col2]' against GET /customer --> true
[21/May/2003:10:34:24] FINE ( 6036): Authenticator[idssample]: Subject to constraint SecurityConstraint[col2]
[21/May/2003:10:34:24] FINE ( 6036): Authenticator[idssample]: Calling checkUserData()
[21/May/2003:10:34:24] FINE ( 6036): Authenticator[idssample]: User data constraint has no restrictions
[21/May/2003:10:34:24] FINE ( 6036): Authenticator[idssample]: Calling authenticate()
[21/May/2003:10:34:24] FINE ( 6036): Authenticator[idssample]: User authentication is not required
[21/May/2003:10:34:24] FINE ( 6036): Authenticator[idssample]: Calling accessControl()
[21/May/2003:10:34:24] FINEST ( 6036): PRINCIPAL : amAdmin hasRole?: customer
[21/May/2003:10:34:24] FINEST ( 6036): PRINCIPAL TABLE: {}
[21/May/2003:10:34:24] FINE ( 6036): Authenticator[idssample]: Failed accessControl() test
[21/May/2003:10:34:24] WARNING ( 6036): CORE3283: stderr: <May 21, 2003 10:34:24 AM CDT> <Agent> <Info> AgentRealm.getGroupNames(amAdmin)
[21/May/2003:10:34:24] WARNING ( 6036): CORE3283: stderr: <May 21, 2003 10:34:24 AM CDT> <Agent> <Info> AgentRealm.getGroupNames(amAdmin) => java.util.Vector$1@bb60ad
Now, snooping around I have found that the AgentRealm.getGroupNames(userdn) does
return the correct grops viz. customer,admin,anyone.
PLEASE HELP-- Second Update --
After policy installation I got several problems with PeopleSoft configuration. Which finally were solved.
1. Some URL's has to be defined as not enforced.
com.sun.am.policy.amFilter.notenforcedList[1]=/ps/images/*
com.sun.am.policy.amFilter.notenforcedList[2]=*.css
com.sun.am.policy.amFilter.notenforcedList[3]=*.ico
2. In versions older than PeopleSoft 8.4.2 the policy agent modified the file
/opt/fs/webserv/peoplesoft/applications/peoplesoft/PORTAL/WEB-INF/psftdocs/ps/configuration.properties to add the properties:
byPassSignon=TRUE
defaultUserid="DEFAULT_USER"
defaultPWD="your password"
signon_page=amsignin.html
signonError_page=amsignin.html
logout_page=amsignin.html
expire_page=amsignin.html
However, in the newer versions of PeopleSoft this properties are controled from the online Peoplesoft console. Which are set on:
PeopleTools --> WebProfile ---> WebProfileConfiguration --> [PROFILE] --> Security --> In section "Public Users" the parameters that has to be changed are:
Allow Public Access (cheked)
User ID : DEFAULT_USER
Password : your password
HTTP Session Inactivity : (SSO TIMEOUT)
and:
PeopleTools --> WebProfile ---> WebProfileConfiguration --> [PROFILE] --> Look and Feel -->
In section "SignOn/Logout" set the following values:
Signon Page : amsignin.html
Signon Error Page : amerror.html
Logout Page : amsignout.html
Note: After making any changes on the console; restart PIA (weblogic instance).
With this the SSO with PeopleSoft is working Ok.
Message was edited by:
LpzYlnd -
AM policy agents for Weblogic help
I installed a Policy Agent for Weblogic Server 8.1 When I try to start the Weblogic server after modifications, the portal server throws an exception....
com.sun.identity.agents.AmAgentFilter not found
When u enter the URL for that application running on Weblogic , it is supposed to be forwarded to the Identity Management page ...but this does not happen..
It is apparently able to read the web.xml file in the Weblogic application but is not able to find the particular class above....nor is it able to contact the IDM.
Any suggestions?
AnandI am trying to install a PA with a Weblogic server. The installation works fine and I have also configured the necessary config files...and the concerned Weblogic server starts up successfully.
But when I enter the URL , I see the following error in the Logs....
<Jan 3, 2006 3:54:12 PM CST> <Error> <HTTP> <BEA-101020> <[ServletContext(id=20772999,name=sbm,context-path=/sbm)] Servlet failed with Exception
java.lang.ExceptionInInitializerError
at com.sun.identity.agents.filter.AmFilter.<init>(Unknown Source)
at com.sun.identity.agents.filter.AmFilterManager.getAmFilter(Unknown Source)
at com.sun.identity.agents.filter.AmFilterManager.getAmFilter(Unknown Source)
at com.sun.identity.agents.filter.AmFilterManager.getAmFilterInstanceForModeConfigured(Unknown Source)
at com.sun.identity.agents.filter.AmAgentFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6724)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.lang.RuntimeException: Exception caught in AmAgentLogManager initializer: Unable to initialize Local Log Handler
at com.sun.identity.agents.log.AmAgentLogManager.<clinit>(Unknown Source)
Can someone help me taclke this problem??
Thanks!
anand -
I am trying to find out if the 2.2 Policy Agent for Domino (6.5.4) is supported for Domino 6.5.1.
Thanks in advance,
Erichttp://www.sun.com/download/index.jsp?cat=Identity%20Management&tab=3&subcat=Policy%20Agents describes what PA are supported.
I know from my past experience that PA 2.1 works with AM 7.1 in Legacy mode but it is not supported.
If your application server or web container is not supported then you can always use PA 2.2 for Sun Java Web Proxy Server 4.0. In this case, you will to place SJWPS in front of your application and your application will be accessed via proxy server.
Vivek -
Hi,
I have installed SAM (together with S1DS, Web Server and Administration Server (from JES installer)).
I have installed and configured Policy Agent for JBoss AS, but i'm getting a browser "Redirect loop" (Redirection limit for this URL exceeded. Unable to load the requested page. This may be caused by cookies that are blocked.) error after I login with a correct user/password combination when I try to access the sample application.
My browser accepts cookies from all domains and I get no error in console.
My AMAgent.properties looks like this:
com.sun.identity.agents.config.user.mapping.mode = USER_ID
com.sun.identity.agents.config.user.attribute.name = employeenumber
com.sun.identity.agents.config.user.principal = false
com.sun.identity.agents.config.user.token = UserToken
com.sun.identity.agents.config.client.ip.header =
com.sun.identity.agents.config.client.hostname.header =
com.sun.identity.agents.config.load.interval = 0
com.sun.identity.agents.config.locale.language = en
com.sun.identity.agents.config.locale.country = US
com.sun.identity.agents.config.organization.name = /
com.sun.identity.agents.config.audit.accesstype = LOG_BOTH
com.sun.identity.agents.config.log.disposition = ALL
com.sun.identity.agents.config.remote.logfile = amAgent_11_126_14_20_8080.log
com.sun.identity.agents.config.local.logfile = /home/ciuc/stuff/src/j2ee_agents/am_jboss_agent/agent_001/logs/audit/amAgent_11_126_14_20_8080.log
com.sun.identity.agents.config.local.log.rotate = false
com.sun.identity.agents.config.local.log.size = 52428800
com.sun.identity.agents.config.webservice.enable = false
com.sun.identity.agents.config.webservice.endpoint[0] =
com.sun.identity.agents.config.webservice.process.get.enable = true
com.sun.identity.agents.config.webservice.authenticator =
com.sun.identity.agents.config.webservice.internalerror.content = WSInternalErrorContent.txt
com.sun.identity.agents.config.webservice.autherror.content = WSAuthErrorContent.txt
com.sun.identity.agents.config.access.denied.uri =
com.sun.identity.agents.config.login.form[0] =
com.sun.identity.agents.config.login.error.uri[0] =
com.sun.identity.agents.config.login.use.internal = true
com.sun.identity.agents.config.login.content.file = FormLoginContent.txt
com.sun.identity.agents.config.auth.handler[] =
com.sun.identity.agents.config.logout.handler[] =
com.sun.identity.agents.config.verification.handler[] =
com.sun.identity.agents.config.redirect.param = goto
com.sun.identity.agents.config.login.url[0] = http://sam.domain:80/amserver/UI/Login
com.sun.identity.agents.config.login.url.prioritized = true
com.sun.identity.agents.config.agent.host =
com.sun.identity.agents.config.agent.port =
com.sun.identity.agents.config.agent.protocol =
com.sun.identity.agents.config.login.attempt.limit = 0
com.sun.identity.agents.config.sso.decode = true
com.sun.identity.agents.config.amsso.cache.enable = true
com.sun.identity.agents.config.cookie.reset.enable = false
com.sun.identity.agents.config.cookie.reset.name[0] =
com.sun.identity.agents.config.cookie.reset.domain[] =
com.sun.identity.agents.config.cookie.reset.path[] =
com.sun.identity.agents.config.cdsso.enable = false
com.sun.identity.agents.config.cdsso.redirect.uri = /agentapp/sunwCDSSORedirectURI
com.sun.identity.agents.config.cdsso.cdcservlet.url[0] = http://dm-test-win-1:80/amserver/cdcservlet
com.sun.identity.agents.config.cdsso.clock.skew = 0
com.sun.identity.agents.config.cdsso.trusted.id.provider[0] = http://dm-test-win-1:80/amserver/cdcservlet
com.sun.identity.agents.config.logout.application.handler[] =
com.sun.identity.agents.config.logout.uri[] =
com.sun.identity.agents.config.logout.request.param[] =
com.sun.identity.agents.config.logout.introspect.enabled = false
com.sun.identity.agents.config.logout.entry.uri[] =
com.sun.identity.agents.config.fqdn.check.enable = true
com.sun.identity.agents.config.fqdn.default = jbossAS.domain
com.sun.identity.agents.config.fqdn.mapping[] =
com.sun.identity.agents.config.legacy.support.enable = false
com.sun.identity.agents.config.legacy.user.agent[0] = Mozilla/4.7*
com.sun.identity.agents.config.legacy.redirect.uri = /agentapp/sunwLegacySupportURI
com.sun.identity.agents.config.response.header[] =
com.sun.identity.agents.config.redirect.attempt.limit = 0
com.sun.identity.agents.config.port.check.enable = false
com.sun.identity.agents.config.port.check.file = PortCheckContent.txt
com.sun.identity.agents.config.port.check.setting[8080] = http
com.sun.identity.agents.config.notenforced.uri[0] = /agentsample/public/*
com.sun.identity.agents.config.notenforced.uri[1] = /agentsample/images/*
com.sun.identity.agents.config.notenforced.uri[2] = /agentsample/styles/*
com.sun.identity.agents.config.notenforced.uri[3] = /agentsample/index.html
com.sun.identity.agents.config.notenforced.uri[4] = /agentsample
com.sun.identity.agents.config.notenforced.uri.invert = false
com.sun.identity.agents.config.notenforced.uri.cache.enable = true
com.sun.identity.agents.config.notenforced.uri.cache.size = 1000
com.sun.identity.agents.config.notenforced.ip[0] =
com.sun.identity.agents.config.notenforced.ip.invert = false
com.sun.identity.agents.config.notenforced.ip.cache.enable = true
com.sun.identity.agents.config.notenforced.ip.cache.size = 1000
com.sun.identity.agents.config.attribute.cookie.separator = |
com.sun.identity.agents.config.attribute.date.format = EEE, d MMM yyyy hh:mm:ss z
com.sun.identity.agents.config.attribute.cookie.encode = true
com.sun.identity.agents.config.profile.attribute.fetch.mode = NONE
com.sun.identity.agents.config.profile.attribute.mapping[] =
com.sun.identity.agents.config.session.attribute.fetch.mode = NONE
com.sun.identity.agents.config.session.attribute.mapping[] =
com.sun.identity.agents.config.response.attribute.fetch.mode = NONE
com.sun.identity.agents.config.response.attribute.mapping[] =
com.sun.identity.agents.config.bypass.principal[0] =
com.sun.identity.agents.config.default.privileged.attribute[0] = AUTHENTICATED_USERS
com.sun.identity.agents.config.privileged.attribute.type[0] = Role
com.sun.identity.agents.config.privileged.attribute.tolowercase[Role] = false
com.sun.identity.agents.config.privileged.session.attribute[0] =
com.sun.identity.agents.config.service.resolver = com.sun.identity.agents.jboss.v40.AmJBossAgentServiceResolver
com.sun.identity.agents.app.username = amagent
com.iplanet.am.service.secret = AQICJmGvlBWYuAYQndALuvNKiw==
am.encryption.pwd = /mY/WidDT34aJtbcFS0pCKFEt6evPeTF
com.sun.identity.client.encryptionKey= /mY/WidDT34aJtbcFS0pCKFEt6evPeTF
com.iplanet.services.debug.level=error
com.iplanet.services.debug.directory=/home/ciuc/stuff/src/j2ee_agents/am_jboss_agent/agent_001/logs/debug
com.iplanet.am.cookie.name=iPlanetDirectoryPro
com.iplanet.am.naming.url=http://sam.domain:80/amserver/namingservice
com.iplanet.am.notification.url=http://jbossAS.domain:8080/agentapp/notification
com.iplanet.am.session.client.polling.enable=false
com.iplanet.am.session.client.polling.period=180
com.iplanet.security.encryptor=com.iplanet.services.util.JCEEncryption
com.iplanet.am.sdk.remote.pollingTime=1
com.sun.identity.sm.cacheTime=1
com.iplanet.am.localserver.protocol=http
com.iplanet.am.localserver.host=jbossAS.domain
com.iplanet.am.localserver.port=8080
com.iplanet.am.server.protocol=http
com.iplanet.am.server.host=sam.domain
com.iplanet.am.server.port=80
com.sun.identity.agents.server.log.file.name=amRemotePolicyLog
com.sun.identity.agents.logging.level=BOTH
com.sun.identity.agents.notification.enabled=true
com.sun.identity.agents.notification.url=http://jbossAS.domain:8080/agentapp/notification
com.sun.identity.agents.polling.interval=3
com.sun.identity.policy.client.cacheMode=subtree
com.sun.identity.policy.client.booleanActionValues=iPlanetAMWebAgentService|GET|allow|deny:iPlanetAMWebAgentService|POST|allow|deny
com.sun.identity.policy.client.resourceComparators=serviceType=iPlanetAMWebAgentService|class=com.sun.identity.policy.plugins.HttpURLResourceName|wildcard=*|delimiter=/|caseSensitive=false
com.sun.identity.policy.client.clockSkew=1011.126.14.20 is the computer where I have the JBoss installation.
11.126.14.18 is the computer where I have SAM services.
Do you have any idea why this error may occur?
Thank you in advance,
CristiHi,
Thanks for your responses, I've included my AMAgent.properties below if you could take a look at it.
I only seem to run into the problem when I authenticate if the following is set:
com.sun.identity.agents.config.profile.attribute.fetch.mode = HTTP_HEADER
If that is set to NONE then I can access the application fine, but if i use the HTTP_HEADER and attempt to pass information via the header I get stuck in the loop which results in the message <strong>".Redirection limit for this URL exceeded. Unable to load the requested page. This may be caused by cookies that are blocked."</strong>
There is no helpful output in either my container log or the Policy Agent logs.
The myHost.local. exists within my /etc/hosts file and using ping and other tools resolve fine.
I am using JBOSS 4.2.2 on Linux (and windows).
If anyone can help save my sanity it would be appreciated.
com.sun.identity.agents.config.filter.mode = URL_POLICY
com.sun.identity.agents.config.user.mapping.mode = USER_ID
com.sun.identity.agents.config.user.attribute.name = employeenumber
com.sun.identity.agents.config.user.principal = false
com.sun.identity.agents.config.user.token = UserToken
com.sun.identity.agents.config.load.interval = 0
com.sun.identity.agents.config.locale.language = en
com.sun.identity.agents.config.locale.country = US
com.sun.identity.agents.config.audit.accesstype = LOG_NONE
com.sun.identity.agents.config.log.disposition = REMOTE
com.sun.identity.agents.config.remote.logfile = amAgent_8089.log
com.sun.identity.agents.config.local.logfile = /usr/j2ee_agents/am_jboss_agent/agent_001/logs/audit/amAgent_8089.log
com.sun.identity.agents.config.local.log.rotate = false
com.sun.identity.agents.config.local.log.size = 52428800
com.sun.identity.agents.config.webservice.enable = false
com.sun.identity.agents.config.webservice.endpoint[0] =
com.sun.identity.agents.config.webservice.process.get.enable = true
com.sun.identity.agents.config.webservice.authenticator =
com.sun.identity.agents.config.webservice.internalerror.content = WSInternalErrorContent.txt
com.sun.identity.agents.config.webservice.autherror.content = WSAuthErrorContent.txt
com.sun.identity.agents.config.login.form[0] = /manager/AMLogin.html
com.sun.identity.agents.config.login.form[1] = /host-manager/AMLogin.html
com.sun.identity.agents.config.login.error.uri[0] = /manager/AMError.html
com.sun.identity.agents.config.login.error.uri[1] = /host-manager/AMError.html
com.sun.identity.agents.config.login.use.internal = true
com.sun.identity.agents.config.login.content.file = FormLoginContent.txt
com.sun.identity.agents.config.auth.handler[] =
com.sun.identity.agents.config.logout.handler[] =
com.sun.identity.agents.config.verification.handler[] =
com.sun.identity.agents.config.redirect.param = goto
com.sun.identity.agents.config.login.url[0] = http://myHost.local:8080/amserver/UI/Login
com.sun.identity.agents.config.login.url.prioritized = true
com.sun.identity.agents.config.login.url.probe.enabled = true
com.sun.identity.agents.config.login.url.probe.timeout = 2000
com.sun.identity.agents.config.agent.host =
com.sun.identity.agents.config.agent.port =
com.sun.identity.agents.config.agent.protocol =
com.sun.identity.agents.config.login.attempt.limit = 0
com.sun.identity.agents.config.sso.decode = true
com.sun.identity.agents.config.amsso.cache.enable = true
com.sun.identity.agents.config.cookie.reset.enable = false
com.sun.identity.agents.config.cookie.reset.name[0] =
com.sun.identity.agents.config.cookie.reset.domain[] =
com.sun.identity.agents.config.cookie.reset.path[] =
com.sun.identity.agents.config.cdsso.enable = false
com.sun.identity.agents.config.cdsso.redirect.uri = /agentapp/sunwCDSSORedirectURI
com.sun.identity.agents.config.cdsso.cdcservlet.url[0] = http://myHost.local:8080/amserver/cdcservlet
com.sun.identity.agents.config.cdsso.clock.skew = 0
com.sun.identity.agents.config.cdsso.trusted.id.provider[0] = http://myHost.local:8080/amserver/cdcservlet
com.sun.identity.agents.config.cdsso.secure.enable = false
#com.sun.identity.agents.config.cdsso.domain[0] =
com.sun.identity.agents.config.logout.application.handler[] =
com.sun.identity.agents.config.logout.uri[] =
com.sun.identity.agents.config.logout.request.param[] =
com.sun.identity.agents.config.logout.introspect.enabled = false
com.sun.identity.agents.config.logout.entry.uri[] =
com.sun.identity.agents.config.fqdn.check.enable = true
com.sun.identity.agents.config.fqdn.default = am.ufidev.local.
com.sun.identity.agents.config.fqdn.mapping[] =
com.sun.identity.agents.config.legacy.support.enable = false
com.sun.identity.agents.config.legacy.user.agent[0] = Mozilla/4.7*
com.sun.identity.agents.config.legacy.redirect.uri = /agentapp/sunwLegacySu<br /> -
Are there any plans to provide a policy agent for Jetty? Really appreciate your response. Thx.
Since you are running AM 7.1 in legacy mode you might try the 2.1 agent since it may be backwards compatible.
-
HT1665 Does the Otter hard plastic belt holder for the iPhone 5 have a warranty by Apple?
Does the Otter hard plastic belt holder for the iPhone 5 have a warranty by Apple?
No, it is made by Otter. I learned that Otter calls it a "Holster Accessory Apple Defender IPhone." Its also called a IPhone belt clip. It came with the IPhone 5 when I purchased it. When I asked about a replacement at an electronic store, they told me that Apple might have a warranty on it. I couldn't find anything on the Apple Web site. So the question was: does Apple have a warranty for the clip?
-
Identity Server Policy agent for BEA Weblogic Server 8.0
Hi all,
I donot find policy agents for BEA weblogic 8.X.
Is the 6.1SP2 version forward compatible?
ThanksYou didn't specified the OS. Please find the PA support with different platforms & softwares..
http://docs.sun.com/source/816-6884-10/chapter1.html#wp21986 -
HT204387 Does the IPhone 4S support NFC technology for Bluetooth pairing?
Does the IPhone 4s support NFC technology for Bluetooth pairing.
NFC and bluetooth are not the same thing.
The iPhone (no currently existing model) does not have the hardware required for NFC. -
Why does the hdmi adapter(purchased from apple for $40) no longer mirror my iPad 2?
Why does the hdmi adapter(purchased form Apple for $40) no longer mirror my ipad 2? If ios6 prevents this, will they return my money?
Does this involve iPhoto in any way? I believe you need to post in a different forum - and since these are strictly uuser to user forums answers about what Apple does or will do are not likely nor reliaible - you need to contact Apple for Apple answers
LN -
What permission does the Service account requires on AD for the Workflow manager 1.0 to be configured in SharePoint Farm?
The workflow manager configuration wizard crashes with the below error when used a domain account (setup account with full prvilige on sql and server). It requires some specific permissions on AD ? I couldnt see any documentation stating what permission
it requires.
Can anyone help ?
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: AUTRTV22OQMI5JWSVNDSSNCH0E5DQ2L1
Problem Signature 02: 1.0.20922.0
Problem Signature 03: 505e1b30
Problem Signature 04: System.DirectoryServices.AccountManagement
Problem Signature 05: 4.0.30319.17929
Problem Signature 06: 4ffa5bda
Problem Signature 07: 3ef
Problem Signature 08: 348
Problem Signature 09: KCKGYE1NBUPA2CLDHCXJ0IFBDVSEPD1F
OS Version: 6.2.9200.2.0.0.272.7
Locale ID: 1044
Additional Information 1: 8e7b
Additional Information 2: 8e7b3fcdf081688bfcdf47496694f0e4
Additional Information 3: c007
Additional Information 4: c007e99b2d5f6f723ff4e7b990b5c691
Log Name: Application
Source: Application Error
Date: 27.08.2014 11:47:54
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: OSS01-MAP-226.global.corp
Description:
Faulting application name: Microsoft.Workflow.Deployment.ConfigWizard.exe, version: 1.0.20922.0, time stamp: 0x505e1b30
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16864, time stamp: 0x531d34d8
Exception code: 0xe0434352
Fault offset: 0x0000000000047b8c
Faulting process id: 0x23a0
Faulting application start time: 0x01cfc1dbe703a8ac
Faulting application path: C:\Program Files\Workflow Manager\1.0\Microsoft.Workflow.Deployment.ConfigWizard.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 36f30eb4-2dcf-11e4-9415-005056892fae
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-08-27T09:47:54.000000000Z" />
<EventRecordID>7471545</EventRecordID>
<Channel>Application</Channel>
<Computer>OSS01-MAP-226.global.corp</Computer>
<Security />
</System>
<EventData>
<Data>Microsoft.Workflow.Deployment.ConfigWizard.exe</Data>
<Data>1.0.20922.0</Data>
<Data>505e1b30</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.2.9200.16864</Data>
<Data>531d34d8</Data>
<Data>e0434352</Data>
<Data>0000000000047b8c</Data>
<Data>23a0</Data>
<Data>01cfc1dbe703a8ac</Data>
<Data>C:\Program Files\Workflow Manager\1.0\Microsoft.Workflow.Deployment.ConfigWizard.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>36f30eb4-2dcf-11e4-9415-005056892fae</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
Log Name: Application
Source: .NET Runtime
Date: 27.08.2014 11:47:54
Event ID: 1026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: OSS01-MAP-226.global.corp
Description:
Application: Microsoft.Workflow.Deployment.ConfigWizard.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.DirectoryServices.AccountManagement.MultipleMatchesException
Stack:
at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRefHelper(System.Type, System.String, System.String, System.DateTime, Boolean)
at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRef(System.Type, System.String, System.String, System.DateTime)
at System.DirectoryServices.AccountManagement.Principal.FindByIdentityWithTypeHelper(System.DirectoryServices.AccountManagement.PrincipalContext, System.Type, System.Nullable`1<System.DirectoryServices.AccountManagement.IdentityType>, System.String,
System.DateTime)
at System.DirectoryServices.AccountManagement.UserPrincipal.FindByIdentity(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsUserValid(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsDomainUserValid(System.String, System.String)
at Microsoft.ServiceBus.Commands.Common.ValidateUserAttribute.Validate(System.String)
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsViewModel.ValidateDomainUser()
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsControl.UserIdTextBox_LostFocus(System.Object, System.Windows.RoutedEventArgs)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.Controls.Primitives.TextBoxBase.OnLostFocus(System.Windows.RoutedEventArgs)
at System.Windows.UIElement.IsFocused_Changed(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.Controls.TextBox.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.ClearValueCommon(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata)
at System.Windows.DependencyObject.ClearValue(System.Windows.DependencyPropertyKey)
at System.Windows.Input.FocusManager.OnFocusedElementChanged(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.SetValueCommon(System.Windows.DependencyProperty, System.Object, System.Windows.PropertyMetadata, Boolean, Boolean, System.Windows.OperationType, Boolean)
at System.Windows.DependencyObject.SetValue(System.Windows.DependencyProperty, System.Object)
at System.Windows.FrameworkElement.OnGotKeyboardFocus(System.Object, System.Windows.Input.KeyboardFocusChangedEventArgs)
at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.KeyboardDevice.ChangeFocus(System.Windows.DependencyObject, Int32)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.DependencyObject, Boolean, Boolean, Boolean)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.IInputElement)
at System.Windows.UIElement.Focus()
at System.Windows.Documents.TextEditorMouse.MoveFocusToUiScope(System.Windows.Documents.TextEditor)
at System.Windows.Documents.TextEditorMouse.OnMouseDown(System.Object, System.Windows.Input.MouseButtonEventArgs)
at System.Windows.UIElement.OnMouseDownThunk(System.Object, System.Windows.Input.MouseButtonEventArgs)
at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.InputProviderSite.ReportInput(System.Windows.Input.InputReport)
at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr, System.Windows.Input.InputMode, Int32, System.Windows.Input.RawMouseActions, Int32, Int32, Int32)
at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr, MS.Internal.Interop.WindowMessage, IntPtr, IntPtr, Boolean ByRef)
at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)
at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
at System.Windows.Application.RunInternal(System.Windows.Window)
at System.Windows.Application.Run()
at Microsoft.Workflow.Deployment.ConfigWizard.App.Main()
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name=".NET Runtime" />
<EventID Qualifiers="0">1026</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-08-27T09:47:54.000000000Z" />
<EventRecordID>7471544</EventRecordID>
<Channel>Application</Channel>
<Computer>OSS01-MAP-226.global.corp</Computer>
<Security />
</System>
<EventData>
<Data>Application: Microsoft.Workflow.Deployment.ConfigWizard.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.DirectoryServices.AccountManagement.MultipleMatchesException
Stack:
at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRefHelper(System.Type, System.String, System.String, System.DateTime, Boolean)
at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRef(System.Type, System.String, System.String, System.DateTime)
at System.DirectoryServices.AccountManagement.Principal.FindByIdentityWithTypeHelper(System.DirectoryServices.AccountManagement.PrincipalContext, System.Type, System.Nullable`1<System.DirectoryServices.AccountManagement.IdentityType>,
System.String, System.DateTime)
at System.DirectoryServices.AccountManagement.UserPrincipal.FindByIdentity(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsUserValid(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsDomainUserValid(System.String, System.String)
at Microsoft.ServiceBus.Commands.Common.ValidateUserAttribute.Validate(System.String)
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsViewModel.ValidateDomainUser()
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsControl.UserIdTextBox_LostFocus(System.Object, System.Windows.RoutedEventArgs)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.Controls.Primitives.TextBoxBase.OnLostFocus(System.Windows.RoutedEventArgs)
at System.Windows.UIElement.IsFocused_Changed(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.Controls.TextBox.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.ClearValueCommon(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata)
at System.Windows.DependencyObject.ClearValue(System.Windows.DependencyPropertyKey)
at System.Windows.Input.FocusManager.OnFocusedElementChanged(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.SetValueCommon(System.Windows.DependencyProperty, System.Object, System.Windows.PropertyMetadata, Boolean, Boolean, System.Windows.OperationType, Boolean)
at System.Windows.DependencyObject.SetValue(System.Windows.DependencyProperty, System.Object)
at System.Windows.FrameworkElement.OnGotKeyboardFocus(System.Object, System.Windows.Input.KeyboardFocusChangedEventArgs)
at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.KeyboardDevice.ChangeFocus(System.Windows.DependencyObject, Int32)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.DependencyObject, Boolean, Boolean, Boolean)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.IInputElement)
at System.Windows.UIElement.Focus()
at System.Windows.Documents.TextEditorMouse.MoveFocusToUiScope(System.Windows.Documents.TextEditor)
at System.Windows.Documents.TextEditorMouse.OnMouseDown(System.Object, System.Windows.Input.MouseButtonEventArgs)
at System.Windows.UIElement.OnMouseDownThunk(System.Object, System.Windows.Input.MouseButtonEventArgs)
at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.InputProviderSite.ReportInput(System.Windows.Input.InputReport)
at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr, System.Windows.Input.InputMode, Int32, System.Windows.Input.RawMouseActions, Int32, Int32, Int32)
at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr, MS.Internal.Interop.WindowMessage, IntPtr, IntPtr, Boolean ByRef)
at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)
at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
at System.Windows.Application.RunInternal(System.Windows.Window)
at System.Windows.Application.Run()
at Microsoft.Workflow.Deployment.ConfigWizard.App.Main()
</Data>
</EventData>
</Event>Hi Karthik,
You could refer to the series of videos below to install and configure workflow manager in SharePoint 2013:
http://technet.microsoft.com/en-us/library/dn201724(v=office.15).aspx
The Episode 2 describes the necessary account in AD with right permission in the installation process:
http://technet.microsoft.com/en-us/library/dn201724(v=office.15).aspx#episode2
Regards,
Rebecca Tu
TechNet Community Support
Maybe you are looking for
-
How to set up and use multiple Ext HD compatible with Windows w/o emulating
I am in deep doodle and confused, sit down and get a cup of coffee cuz is going to be loooooong. I need some suggestions for my present situation. I have posted a similar question but I only got partial answer and I need to complete this task. I migr
-
I can not seem to add any more songs to my ipod. Normally i just click and drag songs i have highlighted in my itunes folders up to the Administrators' ipod and it puts a copy there in my ipod. however i keep getting a message saying there is not eno
-
Trying to get Mac Pro wi fi to be recognized by iPOD touch
My mac Pro was purchased with the Aiport Extreme card. I can use airport on the MAc to connect to my remote Airport Express card to pipe music to my hi fi. I cannot get the iPOD touch to establish a wi fi connection to the Mac though. When I turn air
-
Logging Changes in Org Man Infotype Data
Hi, We currently use Auditing to log changes to PA infotypes but would also find this function useful on OM infotypes (eg IT1001, IT1018 etc). It's possible to see who changed it last using the 'Change Information' icon, but we would like to be able
-
I phone Touch screen Dead Zone
I have had my I phone since it first came out. Now a year and a week after I got it. My lower1/4" of the touch screen dose not responde to touch making the phone useless. It kind of ***** because I treated this thing like baby the whole time I had it