Does the 7th generation nano consist of new hardware or is it the 6th generation with a new software update?

Does the 7th generation nano consist of new hardware or is it the 6th generation with new software?

It is a 6th gen that currently comes with 1.1 that you update to 1.2. Also sells for a lower cost and doesn't require you to pay more for the nike+ kit.
https://discussions.apple.com/message/16297530#16297530

Similar Messages

Hi, does anyone know if I buy a 7th generation nano off ebay, will it be covered under the one year warranty even though I wont have a reciept?

Hi, does anyone know if I buy a new 7th generation nano off ebay, will it be covered by the one year Apple guarantee even though I wont have a reciept? I.e using the serial number.

Yes. It will stil be covered and all you need is the serial number.
B-rock

Will apple release an update for the 7th gen nano to have cover flow?

i got the 7th gen nano for christmas since my old ipod broke in summer, and i love it loads, don't get me wrong, but i do miss cover flow, does anyone have any idea if/how likely it'll be for apple to release an update that could allow cover flow again?

No news yet up to now but i doubt it would be available anytime soon. cheers!

The g, h and backspace on my keyboard are not working even after replacing with a new one.

The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
...am waiting for a QIUCK RESPONSE

How does a usb keyboard attached externally work?
You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too.

[svn:bz-trunk] 5137: Fix failing security tests on BlazeDS/ trunk by using a remote object to invalidate the FlexSession at the end of each test method which should cause each test method to run with a new /clean session.

Revision: 5137
Author: [email protected]
Date: 2009-03-02 10:28:59 -0800 (Mon, 02 Mar 2009)
Log Message:
Fix failing security tests on BlazeDS/trunk by using a remote object to invalidate the FlexSession at the end of each test method which should cause each test method to run with a new/clean session. It looks like some test methods were leaving some things in a bad state which was causing the next test that ran to fail. These may be legitimate bugs/issues so we should investigate further to see what sequence of events gets things into a bad state but for these tests we want all of the test methods to run in isolation.
Modified Paths:
blazeds/trunk/qa/apps/qa-manual/WEB-INF/flex/services-config.mods.xml
blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/remoting-config.mods.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/security/stream ing-amf/JMSAuthSendSubscribeConstraintTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/security/stream ing-amf/MessagingAuthProSendTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/security/stream ing-http/JMSAuthSendSubscribeConstraintTest.mxml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/security/stream ing-http/MessagingAuthProSendTest.mxml
Added Paths:
blazeds/trunk/qa/apps/qa-regress/WEB-INF/src/qa/messaging/SessionManager.java

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

What does it mean when my ipad is in Recovery mode? It's connected to my imac for software update and it says I must "restore" the ipad before itunes can be used. Will I lose everything on my ipad?

What does it mean when my ipad is in Recovery mode? It's connected to my imac for software update and it says I must "restore" the ipad before itunes can be used. Will I lose everything on my ipad?

Unless you have a backup from which you can restore, yes you will lose all of your data and settings.
You should be able to sync your content back to the iPad if you have been syncing with iTunes all along. If you don't sync with iTunes, you can download much of your paid content again for free as long as you use the same Apple ID. This explains downloading past purchases.
http://support.apple.com/kb/ht2519
Unfortunately, at this point, you must restore the device before you can move on. There is nothing you can do to avoid it now.

I am on a trial version of InDesign in Creative Cloud and before I purchase need to know why and the files cannot be opened by others using CS6. Isn't Cloud compatible with CS6 design software?

I am on a trial version of InDesign in Creative Cloud and before I purchase need to know why and the files cannot be opened by others using CS6. Isn't Cloud compatible with CS6 design software?

Industry standard files such as JPEG are compatible with many brands/versions of programs
Proprietary files such as those created by InDesign are often not backwards compatible, due to new features in newer program versions
This is not unique to Adobe... MS Word DOCX files are not backwards compatible with earlier versions of MS Word

Is there a way to get my music from my old library (crashed computer) on my new computer so I can sync that librabry with my new purchases?

Is there a way to get my music from my old library which is located on a crashed computer - to my new computer so I can sync that librabry with my new purchases?

You can only transfer Purchased music over to Itunes on your PC.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
As for you own music, you may have to use a third party software. A good Free one is called Sharepod which you can download from Download.com here:
http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2

I'd like to update the ISO 4.2.1 on an old iPod Touch to ISO 7. Can't find "Software Update" option under General Setting. Where might I look for the option to slightly upgrade the ISO for this device?

I'd like to update the ISO 4.2.1 on an old iPod Touch to ISO 7. Can't find "Software Update" option under General Setting. Where might I look for the option to slightly upgrade the ISO for this device?

You likely have a 2G iPod and those can go higher than 4.2.1
A 3G can go to 5.1.1
IA 4G, with cameras can go to iOS 6.1.6.
The 5G, also with cameras can go to iOS 8
To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
- A 2G to 4.2.1. Requires iTunes version 10 or higher. If a Mac it requires OSX 10.5.8 or later.
- A 3G to 5.1.1 Requires iTunes version 10.5 or later
- A 4G to 6.1.6 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
- A 5G to iOS 8 Requires iTunes 11.4 or later if you update via iTunes
Identifying iPod models

How can you disable the fm radio app on the 7th gen nano?

How can you disable the FM radio app on a 7th gen NANO?

Why would you want to? Unless the app is open, you won't be using the functionaloty or using extra power etc.

I just bought the new iPhone, but it does not sync to my Macbook iTunes because it says I need at least a 10.6.8 software update. My computer is stuck on 10.5.8, however, and my laptop does not say that there are any software updates available.

I tried researching it online, and I think that my computer might be too old to get new software updated on it - I bought it either in 2007 or 2008. I just think that it seems unfair that I have to buy a whole new computer just to put my music and other things on my new iPhone. What should I do? I can't even buy the software update for Mountain Lion because it requires you to already have a 10.6 and I only have a 10.5.8. This is the most frustrating thing ever!

Check the link below for requirements and instructions for upgrading to Snow Leopard (10.6)
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

I am unable to install the latest version of Muse 2014. When I open Muse it comes up with a 'new version is available' and when I click on 'install now' it takes me to the adobe muse website where I click on the 'Download' button. It will then come up wit

When I open Muse it comes up with a 'new version is available' and when I click on 'install now' it takes me to the adobe muse website where I click on the 'Download' button. It will then come up with 'Muse is downloading now'. It will then take me back to the Muse app again with the same 'install now' message. The new version has not installed, could some one please let me know the reason why it isn't installing.

Hi Jeff I have uninstalled Muse from my applications and have tried to download the new version but it displays a message 'file not found'. I have included a screenshot.

When i text with my new 4s the person receiving my text receives it from my email address, when i text with my new 4s the person receiving my text receives it from my email address

when i text with my new 4s the person i send the message to receives it from my email address. how can i fix it?

when i text with my new 4s the person i send the message to receives it from my email address. how can i fix it?

I changed my apple Id and now can't buy stuff for the app that I downloaded under my old Id how do I buy stuff with my new id

I had a old apple id that I downloaded a app. Now I changed apple ids and want to buy something on the app and now I can't.
Is there a way to do so without deleting my app and re downloading it

Go to Settings>Store (or iTunes and Appl Store) and sign out and sign back in. If problem go to Settings>iCloud and make sure you are signed into the new iCloud account. You may have to create a new iCloud account.

Getting messages that Safari does not support gmail. I use OS X 10.6.8 with all current software updates. Fix?S X 6.

Keep getting message saying current version of Safari does not support gmail, but I seem to have latest version (5.0.5). Is there an update I need?
Poroblem goes away when I use Chrome.

Several older browser versions and ones that won't be upgraded without
a major system upgrade (a new OS X, if one is supported in hardware)
get similar messages when using Gmail & perhaps other google access.
If you want to experiment a little and the cost is zero, see the iCab browser
that is shareware but runs free with annoying prompt to buy a license, that
can be set to appear as Safari 6 to various web sites including Gmail. I've
tried it, and that does work. The iCab version that I found helpful works in
either PPC or Intel Mac OS X 10.5 ~ 10.7, there is a later version, too.
There is a recent iCab v.5.5 or an older iCab 5.1.1, since you could use
the more recent, I'd suggest that version over the older one which I have.
See http://www.icab.de/dl.php for iCab 5.5 (30.10.2014 or note a direct
DL link to that, here: iCab_5.5_Intel.zip -- either version is 32/64 bit.
Hopefully you can use the additional options without an OS X upgrade
to later system such as Lion. Sometimes an upgrade goes fine, but
there are good reasons to make a fully bootable clone on external HDD.
Then you could revert to a working copy of what you had before upgrade.
PS: If you are seeing two Safari versions in the Application folder, you
could use Get Info on each (separate, highlight one at a time) to find
what one is newest; then put the older one in Trash. Do not delete it yet.
The icon for Safari in the Dock may need to be replaced by dragging
the new Safari into the Dock, after dragging the old icon out of it...
but generally that part should not be necessary if only one Safari is
in the Applications folder. Be sure to not leave an app in the desktop
when it should be found by OS X in the Application folder.
The newer Safari should be in the Applications folder. Is it?
Check the Downloads folder in the Dock, to see where it went.
Sometimes, the browser's download info will show a history;
you can choose where downloads get stored.
Good luck & happy computing!
edited 2x

Does the 7th generation nano consist of new hardware or is it the 6th generation with a new software update?

Similar Messages

Maybe you are looking for