Does the 8500 wireless all-ion-one support AirPrint

I bought the 8500 in late November 2010. I am getting an IPhone and want to know if I can use AirPrint with the 8500?

Sorry...I should have used the full description. The full ID for the printer is
Officejet Pro 8500 Wireless All-in-One Printer - A909g
I would take it, then, that it does support AirPrint.

Similar Messages

Does the Officejet J3680 all-in-one support air print?

If so do I need an app?
This question was solved.
View Solution.

Hi,
Is this the one ?
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01106836&tmp_task=prodinfoCategory&cc=us&dlc=en...
No and no app available to make it really working.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I am unable to scan using the hp office jet pro 8500 wireless all in one printer from an I-MAC

I have a new I-MAC OS Lion computer and an older HP Officejet Pro 8500 wireless all-in-one printer, scanner, fax, photo. I cannot scan, though I can print and I can fax. The error message says I must be connected to the network, and yet I am connected. The only diagnostic tool available is for MS systems only. Help???

Hi,
Make sure to use any scan method available for Lion.
If you have the HP Scan application installed, be aware that the used software version is not intended for Lion.
Please follow the steps below to find what scan methods may be used on the OS:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01910186&lc=en&cc=us&dlc=en&product=3752459
If there is still any problem while trying to scan, also make sure to install the latest HP Printer Driver 2.9 by clicking the Apple icon and then Software Update.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Scanning to Computer, HP Officejet Pro 8500 Wireless All in one Printer A909g

I am unable to scan to computer with Win 8.1 using my HP Officejet Pro 8500 Wireless all in one Printer A909g. I can scan to email. The system says my drivers and software are up to date. When trying to scan to computer all I get is a blank scan file with no scan number (Scan_Doc0054) as I used to with Vista. In Vista I was able to drive the whole process from my computer. When scanning to email now I have to drive it from my printer as opposed to the computer.
I restarted an old computer running Vista and the 'scan to computer' function is operational. As far as I am aware there are no other functional problems with the printer.
Any help would be very much appreciated. Thank you.

Hi John046,
I am sorry to hear that did not work for you, I do have some more options for you to try:
Uninstall the software. Uninstalling the Printer Software.
Clean boot the computer. How to perform a clean boot in Windows.
Disable any antivirus programs. Windows Defender - Turn On or Off in Windows 8.
Disable any firewalls. Disable firewall Windows 8.
Re-install using the HP Printer Install Wizard for Windows.
If that does not resolve your issue, please call our phone support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Printing problem - HP Officejet Pro 8500 Wireless All-in-One Printer - printer head?

I posted this elsewhere, but I think I posted it on the wrong Forum so I am posting it here now. I hope I did not do anything to upset anyone. I am new to this area, please forgive my clumsiness.
I have a HP Officejet Pro 8500 Wireless All-in-One Printer. I've had my printer since December 2009 and no problems. I recently bought a new laptop with Windows 7 and had to go online to find the drivers that work for my printer. Windows 7 was not compatible with this printer.
Also recently, I am having a problem with what I think may be the black printer head, but when I run diagnostic on it everything comes back saying it is fine. However the problem still exist. When printing the black color will become faded in some areas and in some lines will not only almost totally fade out, but will almost look italic.
Can you tell me if this is the printer head and does it need replacing or is there another problem?
SondraS

Are you using genuine HP cartridges and not refilled or third-party cartridges?
Print the Print Quality Diagnostic page from the setup menu/print report/ on the printer's front panel
Are there any quality issues with this page?
Although I am a HP employee, I am speaking on behalf of myself and not the company.

HP Officejet Pro 8500 wireless all-in-one printer

Just bought second-hand HP Officejet Pro 8500 wireless all-in-one printer. Have no clue how to get it working. I plugged it in and it seems to be operational, but when trying to print, it did not work. Have an HP Pavilion laptop with Windows 8.1. Can anyone help me?

Hi @trudi39 , and welcome to the HP Forums!
I can see from your post you are experiencing print issues. I would like to help!
Do you receive any errors?
Does it print a blank page, or nothing at all?
Are you connected via wireless, ethernet or a USB cable?
In the meantime, I would recommend downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Printing problem - HP Officejet Pro 8500 Wireless All-in-One Printer, Red color fads on 4th copy

I have an HP HP Officejet Pro 8500 Wireless All-in-One Printer, and am trying to print 75 copies of a program for our event. After the first 5-6 pages the RED in my program starts to turn magenta. I have brand new HP ink, and am printing on HP Color Injet Paper. I have renectly replaced the Black/Yellow printhead (at least 6 months ago). At first when I cleaned the printheads, I could print 2 or 3 pages showing my RED color. Then turns back to magenta. When I received the test patterns after cleaning the print heads they are all perfect with no lines.
What is going on and how can I fix it?
This question was solved.
View Solution.

Hi TM1997,
I understand you have an Officejet 8500 Wireless that is not printing red properly, it keeps turning to magenta. I'm sorry to hear this, but I will definitely do my best to help you!
As I'm sure you saw, when replacing the black and yellow printhead, that there are two printheads in the Officejet 8500 and the second one controls the magenta and cyan. I would suggest that you first have a look through this Troubleshooting Print Quality Issues document. You can also manually clean your printhead with the steps in this 'The Following Printhead Appears to be Missing or Damaged' or 'The Following Printhead has a Problem... document.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Officejet Pro 8500 Wireless All-In-One Windows 8 driver not working

Hello!
I recently got a new Dell Inspiron computer running the 64-bit version of Windows 8, and I have an Officejet Pro 8500 Wireless All-In-One Printer from a long time ago. I don't have the disc version of the driver, since I purchased the printer before Windows 8 came out, so I tried to download it from the HP website. Whenever I try to run it, however, it says that it is extracting, but once the extract is finished, nothing happens. The Installation Wizard doesn't pop up, and there is no error message explaing it. Help please?
Thanks!
This question was solved.
View Solution.

Hi,
Can I check if your Officejet Pro 8500 is A909 or A910? Alternatively, you can install the class driver built into Windows 8 to print to your printer. There are also a couple of Windows Store apps (HP AiO Remote and HP Scan and Capture) that would work with your printer.
I work for HP.

Officejet Pro 8500 Wireless All-in-One Printer - A909g printhead

The printer has not been 100% for a few weeks. It would align the printhead fine. When printing, it didn't always print everything - one time blues would be missing, another black would be missing. Received a message saying the ink was out of date. Picked up new ink yesterday, installed it and the printer went thru it's normal routine - cleaning and aligning. It would print the page which was not good and then realign again.
I read up on how to change the printheads. Problem is the printheads are stuck over to the right. I have pressed the * button and done anything else I could find. What do I do now?
Carol Belles

Hey @carolinva,
I understand that you're having print quality printhead related issues on your HP Officejet 8500 Wireless All-in-One Printer. I would like to work with you today in resolving the issue of not being able to remove your Printheads. Now I understand that you have already tried new cartridges and run the cleaning and aligning on the product to no avail. At this point you have determined that the printheads are defective.
Just so you are aware there are two printheads in your product. There is a Black and Yellow Printhead and a Cyan and Magenta Printhead. Because your quality issue is affecting blues and blacks than both printheads may be defective. The printheads run for about $64.99 a piece plus tax in the United States. Also, there is a chance that you could replace both printheads and the issue not be resolved because it's a hardware failure of your ink system. Therefore, the next step would be to replace the printer. New printers do not use the same ink systems as your Officejet 8500 printer so the Printheads would do you no good if you have to replace your product.
Part Number for HP 940 Black and Yellow Printhead: C4900a
Part Number for HP 940 Magenta and Cyan Printhead: C4901a
I'm going to provide you steps on how to properly remove the printheads in your product. Because your printheads failed to initially move to the left I'm going to have you start by running a power reset.
Step 1: Power Reset:
With your printer powered on, disconnect your power cable.
After 30 seconds, plug your power cable back in to the printer.
Your printer should turn on automatically.
Once the printer returns to the ready state, follow the steps below.
Replacing the Printhead for HP Officejet Pro 8500 All-in-One Printer Series (A909)
Please let me know if the steps provided resolve your issue. Should you have further issues be sure to let me know. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Officejet Pro 8500 Wireless All-in-One Printer- A909g Product Code Differences

The Officejet Pro 8500 Wireless All-in-One Printer- A909g has been offered under several product codes:
CB023A#BEL
CB023A#BEV
CB023A#BEK
CB798A
CB794A
CB023A#B1H1027
CB023A#B1H1052
CB023A#B1H-A1
CB023A#B1H-B2
CB023A#B1H
CB023A#BEQ
CB023A#BEP
CB023A
CB023A#BEL#*KIT
CB874A
CB023A#BEL/KIT3+1
CB874A#799
CB023A#B1H1071
CB023A#B1H-C3
CB023A#BEK?BNDL
CB023A#AKY
Are there any differences between any of these? I have looked at product sheets .May have escaped me, but I could not detect differences in product details, specs or included accessories. Are any of the above worth more than others, to justify any price differences?

The Officejet Pro 8500 Wireless All-in-One Printer- A909g has been offered under several product codes:
CB023A#BEL
CB023A#BEV
CB023A#BEK
CB798A
CB794A
CB023A#B1H1027
CB023A#B1H1052
CB023A#B1H-A1
CB023A#B1H-B2
CB023A#B1H
CB023A#BEQ
CB023A#BEP
CB023A
CB023A#BEL#*KIT
CB874A
CB023A#BEL/KIT3+1
CB874A#799
CB023A#B1H1071
CB023A#B1H-C3
CB023A#BEK?BNDL
CB023A#AKY
Are there any differences between any of these? I have looked at product sheets .May have escaped me, but I could not detect differences in product details, specs or included accessories. Are any of the above worth more than others, to justify any price differences?

HP Officejet Pro 8500 Wireless ALL-in-ONE Priner A909g

Hello,
Need Support or Direction to a Thread
I can't get my new 8500 officejet pro wireless all-in-one-printer A909g CD or download software to install ?
" It stops me at the system checking : The OS not supported. Current OS 601.64 "
My OS is windows vista 64 bit.
Thanks
John

hello,
I am also having problems getting the system to install the driver in windows vista 64bit.
It allows me to download the driver but wont run.

Does the newest mac mini ($799 one) support intel vt-d when use the virtual machine like fusion?

I've got some info about this mac mini. the cpu is i5-2520M? which support vt-d. at least intel's page say it can.
I want make sure about this before i buy it, plesas help. thank you~~!

Well, I'm still working on this issue. I know it has something to do with Airport traffic, but not all types of Airport traffic, because I wrote a test program to stream tons of bits across the network, but it doesn't hiccup a bit. My guesses are Airport traffic that writes to the Firewire drives (hence not catchable in a one by one test, since it takes two) or Airport AFP traffic. I'm debating the best way to test these theories. By the way, if I leave the problem long enough, I do eventually crash the computer. Deals with memory allocation, but hardware tests pass.
Fri Jan 12 08:05:44 2007
panic(cpu 0 caller 0x001414FE): zalloc: "kalloc.64" (34240 elements) retry fail 3
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x13f93918 : 0x128d1f (0x3c9540 0x13f9393c 0x131df4 0x0)
0x13f93958 : 0x1414fe (0x3ca24c 0x3c97d0 0x85c0 0x3)
0x13f939b8 : 0x12d994 (0x1509c10 0x1 0x13f93a28 0x1e56ba)
0x13f939e8 : 0x12d9b3 (0x3c 0x1 0x2ffd7d3 0x0)
0x13f93a08 : 0x33bdd4 (0x3c 0x1 0x13f93a38 0x13f93f44)
0x13f93a28 : 0x1bd408 (0x38 0x50 0x0 0x13f93f44)
0x13f93f68 : 0x378337 (0x2f3e5dc 0x2cdd030 0x2cdd074 0x0)
0x13f93fc8 : 0x19acae (0x32ec2d4 0x0 0x19d0b5 0x33b097c) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb30df958
Kernel version:
Darwin Kernel Version 8.8.1: Mon Sep 25 19:42:00 PDT 2006; root:xnu-792.13.8.obj~1/RELEASE_I386
Mac Mini Mac OS X (10.4.8) 1 GB

IMac OSX 10.7.1 - HP Officejet Pro 8500 Wireless All-In-One Driver?

Any clue about where to fine the correct driver? HP refers me to Apple and the Apple version won't work on Lion.

This page from HP http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664444&lc=en&cc=us&dlc=en &product=3752459#N1148 has these printers listed as supported under Lion:
and the "g" model is yours, I think. I guess you have tried to reinstall the driver anyway?

HP Officejet Pro 8500 Wireless All-In-One Printer A909g

My current firmware is: DLM1FN1344AR.
I am due for a firmware update. I still am using my original 32-bit Sony PC (soon to be put out to pasture), and there are now 2 newer 64-bit PCs which will remain on the network.
Should I wait to update the firmware until I remove the old Sony from the network, or would it be safe to update the firmware for the 64-bit OS which exists on my 2 newer PCs?
This question was solved.
View Solution.

Hi Alla-guy,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you have some concerns about updating the firmware on the printer. Just so you know, you will NOT have any issues if you update the firmware. The Firmware has nothing to do with the computers you are using. It is all to do with the printer.
If you have any other questions, please feel free to write back.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

I have a HP office Jet 4500 wireless All- In One, how do I delete the customer participation program

Hi
The customer Participation Program is taking up so much space that I want to remove it from my laptop.
I have a HP Office Jet 4500 wireless All In One. When I attempt to remove it I get a message that says if I remove the program
my device will no longer work.. How can I safely remove it without damaging my equiptment from working?

couple of questions about this:
Are you scanning from the printer, or with software on the computer? If from the computer, are you initiating the scan from Windows, HP software, or Word?
If you put a legal size document in the feeder, and press scan, unless the defaults have been changed to letter size, it should scan the entire legal size sheet. You should be able to go into the settings and change that if the default has been set to letter.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Does the 8500 wireless all-ion-one support AirPrint

Similar Messages

Maybe you are looking for