Does the 932C HP printer with 2 sided printing accessory work with window 7 and office word 2010?

(model#C6463A-double side, printing accessory), for the HP 923C printer?  Is it real slow printing?  Does it flip by itself or do I have to flip it? Also will the printer with the accessory work with windows 7 and office word 2010 to type 4 pages per sheet, like a book? Thanks and please help me!

Hi @Happyforhelp 
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP Deskjet 930/932c Printer series page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

  • Does the dock from a fourth generation ipod shuffle work with a second generation ipod shuffle?

    Does the dock from a fourth generation ipod shuffle work with a second generation ipod shuffle?

    No, they are different.  If you look at the replacement part for the 4th gen shuffle's USB cable
    http://store.apple.com/us/product/MC003ZM/A
    it says it's only for the 3rd and 4th gen shuffle.

  • Does the profile "MSC: Auto-Release Compression Days Tolerance" work with MRP or just ASCP?

    Does the profile "MSC: Auto-Release Compression Days Tolerance" work with MRP or just ASCP?

    All the objects starting with MSC are owned by ASCP and will only be supported in ASCP and no where else.
    Same goes for this profile.
    Thanks,
    Abhishek Sharma
    Please mark the post correct or helpful, if answered

  • Why does the security code for my home network not work with my hp6500?

    I have a HPOfficejet 6500A Plus and am running windows 7 on a Dell desktop.  I've tried to get my printer to connect to a home network and every time I type in the password it won't connect...it fails the security.   I've always used the direct printer cable to connect one of my desktops to the computer and am trying to get the wireless featur to work...it won't. 

    Hi,
    Please refer the link below and download HP Print and Scan Dr utility which will be able to help in installing printer and checking for correct security key.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02271484&tmp_task=useCategory&cc=us&dlc=en&lc=e...
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • HP 8620 printer two sided printing reverses pages

    Is there a way to change the order that this printer prints double sided prints? It prints last page first, so if it is 3 pages pages 2 & 3 are one page and page 1 is just one-sided.  Need this to be reversed.  Can you do this in the Mac driver?
    Lisa

    Hello @thekoaman,
    Welcome to the HP Support Forums!
    I understand that you're experiencing issues when duplex printing from your Mac OS X 10.10 Computer to your HP Officejet Pro 8620 e-All-in-One Printer. I want to thank you for including all of the detail regarding the troubleshooting steps you have already completed in your posts. At this time I do believe that there is either a driver corruption on your computer with the HP Officejet, or an issue with the file that you're attempting to duplex. If multiple documents  are experiencing the duplexing page order issue than that will rule out a corrupted document. Can I please have you follow the steps below.
    Step 1: Reset the Print System:
    To start, I am going to have you Reset the Print System on your Mac as it is important that we have a nice clean slate to work with for troubleshooting. Please click here for instructions on how to perform the Reset. When the website opens follow the steps under'Resetting the printing system in OS X Lion' as the steps are the same for your Mac OS X 10.10 Operating System. This Reset will remove every printer from your Mac. However, it does not uninstall the printers. Therefore, should you use other printers on this Mac, once the Reset is complete simply ensure that the printers are connected via a USB Cable or Network connected and (+) Add them back in. Do not add your HP Officejet back in at this time.
    Once the reset is complete, please proceed to the next step.
    Step 2: Uninstall Drivers and Software:
    Next, please click here for steps on how to properly uninstall your printer. Once the site opens select the dropdown for 'Mac OS X v10.6, OS X v10.7, OS X v10.8, and OS X v10.9'  as they are the same for Mac OS X 10.10 and follow the steps to complete the uninstall process.
    Once the uninstall is complete, please continue on.
    Step 3: Verify and Repair your Disk Permissions on the Mac:
    Open Macintosh HD and go to Applications
    Go to the Utilities Folder
    Open the Disk Utility
    Select the Hard Drive volume you are using (usually on the left)
    Select Verify Disk Permissions
    Once that process is done, select Repair Disk Permissions
    Step 4: Check for Apple Updates:
    Go to Apple
    Select System Preferences
    Select Software Update
    Click Update Now
    Install your available updates
    Restart your computer
    Step 5: Add the Printer:
    1. Please click here to download the correct drivers for your printer.
    2. Once the website opens select the Download button on the top left
    3. Once the download is complete, please follow the onscreen instructions to install your printer
    4. Once the installation is complete, I would like you to check your driver to ensure that the HP Officejet driver is being used and not the AirPrint driver.
    5. Click the Apple menu, and then click System Preferences.
    6. Click Print & Scan, and then check if the name of your printer displays in the Printers list.
    7. If your printer is already listed, remove and re-add the printer to confirm communication with the Mac. Click the name of your printer, click the minus sign (), and then delete the printer
    8. Click the plus sign (), click Add Printer or Scanner, click the name of your printer
    9. Click the Use or Print Using box, and then select the name of your printer in the pop-up menu. Ensure that you have the HP Officejet driver selected and not the AirPrint.
    10. Click Add to add the printer to the list.
    - Source
    Now that the driver is added back in successfully, please try duplex printing again.
    Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5.  My old android phone worked perfectly with my car.  Even the tech guy at Lexus couldn't get it to work.  What is apple doing to fix this.

    The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5.  My old android worked perfectly with my car.  Even the tech specialist at Lexus couldn't get it to work.  Lexus said that other iPhone 5s were having the same problem.  What is apple doing to fix this?

    Going to the local Apple store this morning...
    My problem is not uncommon as the board is showing signs of this happening to many others as well. That is where I found the restore and reboot information to try to solve the issue of crashing apps.
    I understand that Apple will not "give away the cow", but letting iPhone users know that the problems they are having are being addressed by Apple is a little more comforting than nothing at all. Other wise, all the apps in world are useless and even more importantly worthless, if a person has to reset/reboot/reload just to get them to work.
    IF Apple can not address the basic problems with todays iPhone apps, why should one believe that the iPhone 3.0 OS is any better? Using a PC comparison, which is better, XP or Vista. If the current iPhone OS of 2.2. what ever is not working that well (as related to down loaded apps and iTunes), will OS 3.0 be any better?
    The waste of time I refer to is in going to the apps store and downloading the apps... Again why by apps if the free version does not work?

  • I recently updated my iTunes with the lates version but now it does not detect my iPhone 5 which it was working with the old version!!!

    I recently updated my iTunes with the lates version but now it does not detect my iPhone 5 which it was working with the old version!!!

    Hi, M_ghaderi.  
    Thank you for visiting Apple Support Communities.
    If your device is not recognized by iTunes, I would recommend the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • How long does the IPhone5c battery last for without hardly any usage with about 2/3 to 3/4 left?

    How long does the IPhone5c battery last for without hardly any usage with about 2/3 to 3/4 left?
    Has the side affect of charging, where the battery's life gradually decreases overall with each charge, been fixed ?

    Eric,
    They did say 12-14 hours, but as is always the case with such estimates, they invariably quote the 'best possible scenario' and almost never mirror 'real world' conditions.
    If, from a fully charged position, you simply switch on your nano, and set it to continuously play through a long set of songs, with EQ off, backlight off, modest volume (50%) don't touch it during playback, then you might just get somewhere near this figure - and if you don't then it's either not been conditioned properly or it's faulty.
    If you use it like me, daily for a couple of hours, with 2 secs backlight and switch songs regularly, using fairly high volumes then 6-8 hours is more likely. It'll even drain when it's not in use, even in sleep mode, albeit very slowly. They also tend to drain more quickly before they've been through their first few charge cycles (the conditioning period).
    Personally I haven't got a problem with this though I can understand why some people have. It's not very impressive in this respect. Apple should be able to come up with something much better - maybe they should talk to Sony

  • Does anyone have a Motorola T 501 speaker phone working with the I Phone 3G

    Does anyone have a Motorola T 501 speaker phone working with the I Phone 3 G in the car? If you do? Can you tell me how I can answer the calls from the T501, and not have to answer from the iphone, as right now it doesn't seem to be working correctly, unless I am doing something wrong?
    Thanks

    I have the Motorola T505 speakerphone which I too am using. And no, it doesn't work correctly either. It seems I have to answer the iphone first and then the call is transferred to the speakerphone. I do end the calls with the speakerphone but that's it. I also found that the Motorola no longer announces the incoming call and I've lost certain voice commands.

  • Does the hp deskjet f380 all-in-one can work on a mac os x 10.7.5 ?

    does the hp deskjet F380 all-in-one can work on a mac os x 10.7.5 ? I bought my all-in-one F380 in october 2007 and I would like to use it on my new computer Mac OS X 10.7.5 bougt in december 2011. The DVD from 2007 seems to be unavailable now on my computer. Can you provide me a new way th install the F380 ? Thanks in advance,

     Update:I use mac OS 10.10, but i scrolled down in the driver download menu and selected mac OS 10.6. There I downloadedHP Deskjet PSC and office jet full feature software and drivers v 10.3. This gave me access to full feature software including utility, customer partcipation and scanner software. HP printer software V. 3.1 then automatically downloaded when i clicked apple update in the application store. Interestingly however this is not the version mentioned in the software I use though. Post download, the version of the printer driver mentioned for Deskjet F380 is v2.05 and the version for the utility software is 5.24.2 valid till 2015. Now both my HP Deskjet F380 and  HP PSC 1310 all-in-one PRINT Thanks HP! ISSUES: HOWEVER neither can SCAN! while the F380 shows a scanning error, the PSC 1310 doesn't even pop up as a selectable device to scan with! PLEASE FIX THIS HP! FAST!!     

  • Does the wall charger for a 17" macbook pro work on my new Macbook Pro?

    I searched for docs and specs but can't seem to come with anything. Does the wall charger for a 17" macbook pro work on my new Macbook Pro?

    Well, obviously you have NO faith in me or you wouldn't ask.
    Go to the Apple Store online. Search for laptop power products and look for Apple's replacement AC adaptors. One is the 60 watt model for MacBooks. The other is the 85 watt adaptor - now read this very carefully because it's in smaller, lighter print - which says for 15" and 17" MacBook Pros. Will you take Apple's word?

  • Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this applicati

    Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this application and Mac OS X" although bridge has been running on my Mac for over a yera. I have installed all current updates for Mac and reinstalled Bridge again from CC and still get the same issue? Any advice?

    Would you please provide details about your setup?
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Why does the internet on my new macbook pro not work when my old macbook's does?

    Why does the internet on my new macbook pro not work when my old macbook's does? I'll have to turn the wifi off and back on multiple times to get the internet to continue to work on my Macbook Pro (running mountain lion but did it on lion also) when it runs fine on my old white Macbook (running lion). Is there something I can do to fix it or do I just have to deal with it?

    Here is your fix .. I have uploaded my properly calibrated profile get it here :
    http://www.megaupload.com/?d=YAJL6A9X
    And it should go to your user folder/Library/ColorSync/Profiles
    if you have one already you can rename either one ..
    and then go to system preferences - displays - color to select the profile .
    you will get rid of the blue tint while keeping correct color and gamma
    This is for the newer 2010 MBP's altho if same display was used might also give good results in the previous models as well . .

  • My iphoto on my imac somehow updated on its own and now its saying "The photo library needs to be upgraded to work with this version of iPhoto." have i lost my photos?

    I tried to open my iphoto last night on my iMAC and it somehow updated on it's own and now has a message saying  "The photo library needs to be upgraded to work with this version of iPhoto. Your photo library will not be readable by previous versions of iPhoto after the upgrade.The upgrade process for very large libraries may take an hour or more to complete." I only have the option to quit or upgrade. What does this mean? Have i lost my pictures? i don't properly have my back up hard drive set up so all my pictures aren't backed up.

    "The photo library needs to be upgraded to work with this version of iPhoto. Your photo library will not be readable by previous versions of iPhoto after the upgrade.The upgrade process for very large libraries may take an hour or more to complete."
    After your iPhoto application got updated to a new version, iPhoto will convert the iPhoto library to a new format, that is used by the new version. The warning tells you, that after this upgrade older iPhoto versions will no longer be able to read the iPhoto library. If you have a second Mac with older software that might be important. Make a backup to be on the safe side and let iPhoto upgrade the library.

  • Google drive does not work with specific group but works with all users group!!

    Hi,
    Why Google drive does not work with specific group but works with all users group?
    My rule :  Internal > external > all users = works fine
    But
                   Internal > external > A group = not working !!

    Hi,
    if you require user authentication in Firewall policy rules, the clients must bei Webproxy clients (for HTTP / HTTPS) or TMG clients (for TCP/UDP):
    http://technet.microsoft.com/en-us/library/bb794762.aspx
    regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

Maybe you are looking for