Does the adapter for my iPhone 5 allow me to play music on my old docking stations?

I have had my 5 for awhile now, and have been using the adapter for charging purposes. However, I just recently tried plugging it into a music dock and can't seem to get it to work. Does the adaptor allow me to use my old accessories, or is Apple making me buy all new equipment? What about car hookups?

If you are refering to an Apple (genuine ) adapter then I use several ,in car
and where the device has a 30 pin plug (as in Bose sound Docks ) also.
Not had any problems or issues at all
BUT I have only used the genuine Apple product both the standard and the 0.2m version

Similar Messages

Iphone 4 when using ipod playing music phone switches to docking station. I think this maybe a software update problem for it did not do this since the last update. please help !!!

Hello ?????

hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

HT4108 ok so i got the GSI HDMI Cable Adapter for my iphone 4s and it wont play anything i bought from itunes as far as movies???

ok so i got the GSI HDMI Cable Adapter for my iphone 4s and it wont play anything i bought from itunes as far as movies???

I just bought a GSI HDMI Cable Adapter for my IPad2, which is running IOS 8. The adapter is not even recognized by the ipad.

The sound on my iPhone 4S cuts out when playing music/podcasts.

The sound on my iPhone 4S cuts out when playing music/podcasts. If I unplug and replug in the headphones, the sound comes back on, but often for only 20 seconds or so before cutting out again. Sometimes it will play for 15-20minutes before cutting out. The track is not "paused", and appears to continue, just no sound. I tried cleaning the headphone jack with compressed air to no avail. I also noticed the the same phenomenon occurs when I sync my bluetooth to my car audio. That is, it will play for a while, then the sound will cut out, even though the track is still shown to be playing. If I reset the bluetooth, the sound comes back on.
This started happening about a week ago, but no "event" that I can think of caused it. I didnt' get the phone wet, forcefully drop it, or leave it in extreme heat. I've tried doing a reset of the phone. I also was running iOS5 when I first noticed this, and since upgraded to iOS6. The problem appeared with both.
Any help would be greatly appreciated.
Thanks,
Steve

One thing that helped was getting a toothbrush and scrubbing the dock connector on the phone. I scrubbed the connector and used compressed air for about 1/2 hour till the connector looked much cleaner. An Apple employee told me that the pins on the phone had a little corrosion and sand. The problem hasn't gone away completely, but has been significantly reduced. I'm going to hold out until my contract expires after which time I'll switch to an iPhone5 (or newer) or Android phone.

My iphone 4s doent want to play or charge on yamaha docking station

my iphone 4s doent want to play or charge on yamaha docking station, it works fine with the ipod cable when connected to the pc or charger, any suggestions

Sounds like you have a Windows computer. See this support document for help with iTunes not recognizing the iPhone. iOS: Device not recognized in iTunes for Windows

How do i fix the sound on an iPhone 4S? When i play music the sound bar at the bottom disappeared and when i try to adjust sound with the buttons on the side, nothing happens. Also the sound in my apps is not working.

The sound isn't working. And it also does not appear, when i try to adjuct it with the buttons the sound bar doesn't appear and when i try playing music at the bottom the sound bar disappeared. How do I fix this?

Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device. Have you gone through ALL of these troubleshooting steps?
If you have gone through all the troubleshooting steps and you're still having problems, you'll need to bring your phone into Apple for evaluation.

Sync message, "You have changed the settings for your iphone. Would you like to apply these changes?" What does this mean? I don't recall changing anything...

Sync message, "You have changed the settings for your iphone. Would you like to apply these changes?" What does this mean? I don't recall changing anything...

The main settings that are changed in these cases can be found in this article:
http://support.apple.com/kb/ht1386
To ensure you don't lose any data you don't want taken off, ensure that each Summary, Apps, Music, Movies, TV Shows, Podcasts, iTunes U, Books, & Photos have the settings you would prefer on the computer.
If anything gets changed on any of those pages, you will be prompted with that message. If they look fine, especially after adding some media like songs or videos, then you can apply the changes without fear.

I tried to update the software for my iPhone 4S. It froze, and now won't turn off, or on, or sync. Any ideas on how to fix this?

I tried to update the software for my iPhone 4S, 16 GB to the most recent version (8.1?). I don't know what I was updating from, because I can't access that, but it was whatever was installed on it (I got it about a year ago, so probably 6.something).
It froze, and now won't turn off, or on, or sync with my macbook plus, which is what I have always sync'd it to. (I backed it up and sync'd it right before I tried to update the software.)
Since it originally froze almost 3 hours ago, it shows a white screen with the apple on it and a line underneath. When I try to sync with my laptop, it says it needs me to enter a passcode on the phone, which I can't enter because the screen is frozen. So I'm unable to access the iPhone portion of iTunes.
I have tried to turn it off, with no luck. I have tried rebooting my laptop and syncing, but I still get the same result.
Does anyone know how to fix this?
I really wanted to wait to update the software, but I was having internet connectivity issues for the past 3 weeks, and Sprint suggested updating the phone's software.
Thanks in advance for your help!

Hi NWL1,
Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

Apple 30-pin adapter for my iPhone 4 and iPod doesn't work

I purchased an Apple 30-pin adapter for my iPhone 4 and iPod touch to connect an HDMI cable to my HDTV. I am able to get audio but no picture. Any suggestions as to what the problem may be?

Review this
http://support.apple.com/kb/ht4108

How to resolve error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone. Delete the backup for this iPhone, then try again."

I inadvertently deleted my iPhone backup on my MacBook Pro. I restored iPhone to factory settings and then synced remotely with iCloud. However the error message repeatedly states:
iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone. Delete the backup for this iPhone, then try again.
Any ideas as to how this can be resolved please. Thank you very much.

My wife's iPhone 5 would not backup, after upgrading to iOS 8.     The "genius" at the Apple store succeeded in DELETING, the only recent backup of her phone so
recovery became more critical.
I followed all the procedures for troubleshooting it, but still it would try to backup and then stop due to an error. We particularly wanted to preserve some game data/history/progress that she'd been working on for years.      This game (Dream Fish) would no longer open after the iOS 8 upgrade ... and the phone would not successfully backup, and so we had no confidence that it would restore from an older backup either.       I googled for solution and found Phoneview and iFunBox.      These apps allow you to see & access data files in the iPhone.      Phoneview was too fragile and crashed when copying a file any size.
I found "iFunBox".     iFunBox was excellent.      I used iFunBox to recover her game data.    It allows you to make a copy of data files that reside on the iPhone... and store them as a manual backup on the Mac.
And in the process I found 2 games that caused iFunBox to crash.      The 2 games in question were not important enough to try to keep, so I deleted them from the iPhone.
So then, I had a manual backup of the important iPhone data, and had eliminated two game files that apparently had a conflict with iOS 8.
My next Backup attempt was successful.        The iPhone with iOS 8 would now backup to both the Mac and to the Cloud.
Next I deleted Dream Fish from the iPhone and downloaded a fresh version from the Cloud.    The new Dream Fish with no history opened in iOS 8.
Then I used iFunBox to copy my wife's Dream Fish data history from the Mac back into the new game.
Once the transfer was complete, Dream Fish would now OPEN and all of her progress was there and working like normal.
Hope this helps.

After forgetting the password for my iPhone, I am trying to restore it through iTunes, however, during the process, the phone keeps turning on and asking for the password, thus canceling the process. Any advice?

After forgetting the password for my iPhone, I am trying to restore it through iTunes, however, during the process, the phone keeps turning on and asking for the password, thus canceling the process. Any advice?

Yes, you will still get the prompt.
I meant reset then try the recovery mode restore again.
You can also try DFU Mode.
DFU (Device Firmware Update) Mode is different than Recovery Mode.
DFU Mode is a special mode where the device can still interface with iTunes, yet it does not load the iBoot bootloader.
DFU Mode:
Plug your device into your computer.
Turn off the device.
Hold the Power button for 3 seconds
Hold the Home button without releasing the Power button for 10 seconds
Release the Power Button but keep holding the Home button
Keep holding the Home button until you are alerted by iTunes saying that it has detected a device in Recovery Mode
NOTE: Make sure the device screen is blank and no logos are present. Be patient, it make take several trys.

After doing an update for my iphone 4 I lost most of my new purchased music on Itunes, can I restore it? I have my apps...

After doing an update for my iphone 4, most of my new purhcased music has been deleted off Itunes, I have my apps back, but the music has disappeared, can I restore it and get it back so I can transfer it back to my iphone?

http://support.apple.com/kb/ht2519

How run reports JDE from BPEL using the Adapter for JD Edwards OneWorld?

Hi,
I need to load on line a lot of invoices from Bpel to JD Edwards using the Adapter for JD Edwards OneWorld (iWay).
Using Business Functions as Web Services it wasn't a not good idea because of this Adapter is poorly constructed and doesn't allow simultaneous loads, a memory leak occurs on JDE server. And to load them invoice by invoice is very slow.
A choice is to use Z tables and load them through schedules, but Bpel loses total control.
I heard that I can run processes reports that enable to extract the data from the Z tables and load them into JDE.
How can I execute reports JD Edwards invoked from BPEL using the Adapter for JD Edwards OneWorld?
Thanks
Francisco

Hi Dario,
BizTalk 2013 R2 (JDE LOB Adapter) is not tested against latest release of JDE EnterpriseOne 9.1.
It only supports with 8.12 and 9.0 version of JDE.
Refer the discussion here:
Integrating BizTalk with JDE EnterpriseOne
Rachit
Please mark as answer or vote as helpful if my reply does

The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location

Could anyone please help in resolving the following
error:
Server Error in '/BizTalkXXXMyAppWcfService' Application.
The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc".
Please verify that the receive location exists.
It does exist: When I go to All Artifacts >> Receive Locations I can see: WcfService_BizTalkXXXMyAppWcfService/XXXMyApp
Also it is Enabled, green, up and running.
…and that the isolated adapter runs under an account that has access to the BizTalk databases. – Checked, the BizTalkUser has all the permissions to access BizTalk databases.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc". Please verify that the receive
location exists, and that the isolated adapter runs under an account that has access to the BizTalk databases.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0xc0c01666): The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc". Please verify that the receive location exists, and that the isolated
adapter runs under an account that has access to the BizTalk databases. ]
   Microsoft.BizTalk.TransportProxy.Interop.IBTTransportProxy.RegisterIsolatedReceiver(String url, IBTTransportConfig callback) +0
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfIsolatedReceiver`2.RegisterIsolatedReceiver(Uri uri) +318
[AdapterException: Failed to register isolated receiver for address "/BizTalkXXXMyAppWcfService/XXXMyApp.svc"; receive location does not exist or is disabled.]
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfIsolatedReceiver`2.RegisterIsolatedReceiver(Uri uri) +875
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHostFactory`3.CreateServiceHost(String constructorString, Uri[] baseAddresses) +363
   System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath) +1423
   System.ServiceModel.HostingManager.ActivateService(String normalizedVirtualPath) +50
   System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) +1132
[ServiceActivationException: The service '/BizTalkXXXMyAppWcfService/XXXMyApp.svc' cannot be activated due to an exception during compilation. The exception message is: Failed to register isolated receiver for address "/BizTalkXXXMyAppWcfService/XXXMyApp.svc";
receive location does not exist or is disabled..]
   System.Runtime.AsyncResult.End(IAsyncResult result) +890624
   System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +180062
   System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +107

Hi,
This seems to be a permission issue.
Makesure account used in the application pool is a member of the BizTalk Isolated Host Users group.
Also its working considering either make the ASPNET user account a member of your BizTalk Isolated Host Users group to make sure it has access to the biztalk databases (or change the asp.net services to run under a different account, which would need
to be done from the framework's core .config files)
Regards
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

How long does it take for an iphone 5s to go from preparing to ship to shipped?

How long does it take for an iphone 5s to go from preparing to ship to shipped. I ordered my iphone on sept 20 6:00 pm and right next to the "preparing to ship" it still says 7-10 days and apple already took the money out of my account?

Apple.com has notoriously given very accurate assessments of their ship dates. Keep checking back there for updates. The place to look is in the Store ... find the "Account" button near the upper right.

Does the adapter for my iPhone 5 allow me to play music on my old docking stations?

Similar Messages

Maybe you are looking for