Does the airport express need to be on the same floor as the apple tv for best streaming?

does the airport express need to be on the same floor as the apple tv for best streaming?

Yes. Distance can increase interference causing delays in streaming.

Similar Messages

HT1515 Does the airport express need to be connected to router if you are using USB for printer?

My thinking was I could connect airport express to printer by USB and it would work without connecting it using CAT5 to router. Am i wrong??

This should work fine if the Express is connecting to a wireless network provided by another Apple router. Is that the case here?

Does my Airport Express need to be hardwired to my modem?

My Imac and modem are in my basement. I have an airport express in my garage so i can play music through Airplay. Does the airport express need to be connected to my modem with an ethernet cable, or can it just connect to my wifi network to enable Airplay?

See this article, AirPort Utility 6.x: Set up a bridge or AirPort Express: How to join an existing Wi-Fi network in client mode , about configuring the AEX. Be sure to have your Airport enabled on the computer.
I'm not sure how easy this will be when using a non-Apple router.

How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.

How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.
What I'm looking to do is to have self powered in ceiling speakers in every room in my house with out having to run wires to every room to carry the audio signal. I would like to use the airport express to do the job of carting the audio signal.
Here's my set up now I have an airport extreme and one airport express that I use to carry audio to one room.

FWIW. I have used up to four AirPort Express Base Stations (AX) for streaming sucessfully in pretty much the way you have described. I didn't have a need to try more so I can't attest that more would or would not work.

Why does 2 Airport Expresses connects to one another instead of connecting to the primary Airport Extreme For internet Connectivity ?

I have Netgear DG834G router only for dsl connectivity wifi connectivity to that router is off. i have connected netgear that provides adsl connectivity to the (Shakeel's Airport Extreme) Airport Extreme dual band Wireless N 5th generation via cat 5 cable so airport extreme is the main wifi device through which i get wifi signals at my home. now our house is big and i have installed the adsl netgear modem and airport extreme router at the same place in my room in the upper story but the signals are weak even in the upper story at the other end of the house so i have installed the new airport express dual band wireless N in the upper story (Kafeel's airport express) and it is connected to the primary airport extreme (Shakeel's Airport Extreme) wireless router in range extention mode it repeats the same ssid. Our ground floor has another airport express dual band wireless N the new one ( Lounge's airport express) signal was weak there so i installed another airport express (Lounge's Airport Express) their and configured it to extend the range of primary router airport extreme (Shakeel's Airport Extreme) in the upperstory with the same ssid. Now the problem i am facing that sometimes lounge's airport express connects to kafeel's airport express instead of connecting to the airport extreme and the signals in lounge are weak because all the devices are connected to kafeels airport express and does not connect to lounge air port express. but when lounge airport express is connected to primary router airport extreme then everything works fine devices connect to lounge airport express and signals are full. i have took pictures of the problem i am facing you will understand better by having a look at it. In normal working setup both the airport expresses are connected to airport extreme which is shown in this picture
The second picture shows when lounge airport express is connected to kafeels airport express and not the airport extreme (Shakeel's Airport Extreme) this is the problem.
isnt there a way to correct this so that they dont connect with each other and connect to the airport extreme ?

Lounge's AirPort Express must be located signficantly closer to Shakeel's AirPort Extreme than it is to Kafeel's AirPort Express, and there must be fewer obstructions in the signal path than the other possible connection.
The reason is that if you want Lounge's AirPort Express to connect to Shakeel's AirPort Extreme, it must receive a significantly stronger wireless signal from Shakeel's AirPort Extreme than it does from Kafeel's AirPort Express.

The airport express needs to be plugged into the modem to work?

I already have a wifi device plugged to my modem I was trying to get a wifi extension signal to the other room. I boguht the airport express expecting to get wifi signal without having to plug it to the modem. Is that possible?

As I said....
The AirPort Express can "extend" the wireless signal of another Apple product....an AirPort Extreme, Time Capsule, or another Express......using wireless only.
Another way of saying the same thing is that you must have a minimum of two Apple routers if you want to be able to "extend a wireless network".
The Express will not be able to extend the signal of your Xfinity modem/router using wireless only. It should be able to "join" the wireless network if you want to connect a remote printer or use AirTunes. But, the Express will not provide any additional wireless signal coverage when it "joins" a wireless network.
You will need to plan to connect the AirPort Express back to your Xfinity modem/router using a wired Ethernet connection if you want the Express to provide more wireless signal coverage for your network.

Can the Airport Express connect wirelessly to a current modem and be the wireless connection for an external??

I'm confused, I purchased the Airport Express and GDrive external hard drive at the Apple store. I already own a wireless modem that works fine (AT&T). I want to extend the wireless signal to the downstairs where the office is and keep the Airport Express in the office (connected wirelessly to the modem upstairs) plugged into the new GDrive to make that wireless. I want the G Drive in the safe location of the office and that was the sole reason I purchased the Airport Express. Is it possible??

As I said, the USB port on the AirPort Express will not support a hard drive. It will only support compatible printers.
If you want to connect a hard drive, you will need an AirPort Extreme.....not an AirPort Express. See this Apple comparison chart to confirm. Might be a good idea to print it out and take it to the "genius" types.
Compare Apple Wi-Fi base stations AirPort Express AirPort Extreme Time Capsule
But, even if you have an AirPort Extreme the chances that it would "extend" the wireless signal from an ATT router are about zero.

Does the airport express need to be connected to router with ethernet cable to work?

We are trying to set up 2 zones for streaming music. The guys at Apple sold me an airport express. However I cannot get it to connect to the internet unless it's wired directly to my wifi router. This does not work for me as the components I need to plug into it are located in another room of the house. Am I doing something wrong or am I trying to get the AX do something it can't?

The Express cannot wireless extend non apple router.. however it can join a wireless network that is non-apple and it can work as a wireless to ethernet bridge. It should be able to connect the audio output to amp or speakers. But you need to do the setup, choosing join a wireless network which is under the options and not displayed as a standard connection type in the utility.
Here is one example of doing it.
https://discussions.apple.com/thread/5719954?tstart=0

Does my airport express need to be plugged to an ethernet to connect to the internet?

I am trying to set up my airport express so it can be connected to the wireless internet in my home, but no necessarily through ethernet chord so I can use the speakers with it in the other room.

Your Express does not require an Ethernet connection in order to gain Internet access. It must however be connected to another router that does via a wireless connection.
However how you would configure the Express to do so would depend on, whether or not, that other router is another Apple product (Express, Extreme, or Time Capsule).

I need help configuring the Airport express from a PC

Hi there!
I want to configure the airport express from a PC. It runs okay but the connection is open (anyone can browse on my connection)
In a PDF that I found on Apples web site, it says go to
Start-> All programs-> Airport express setup assistant, but there are no programs named Airport on my PC!
Do I have to download a utility for this purpose?
Fredrik

If all you want to do is add wireless security to an already configured Express, you'll probably want to use the Airport Admin Utility. You should be able to install it by installing this package:
http://www.apple.com/support/downloads/airport42forwindows.html
If the PC isn't running at least Windows XP, I think you're out of luck.

Does the Airport express base station connect to any modem?

ive got the apple tv in the lounge room where there is poor wi-fi reception and am wondering wether i should get the airport express or get a new modem. what can the airport express do that the extreme cant, and can the express connect to any modem? I have a NETGEAR modem.

By modem, do you mean just a dumb modem or modem router?
If you mean the modem, yes.
If you mean a modem router, yes, but only as an access point, not as a router (unless the Netgear supports modem mode).

I recently bought an airport express and tried to set it up through my iphone5 wifi settings but the airport setup does not show up. Is the problem with the airport express itself?

Nothing comes up in the airport utilities app either. The amber light continuously blinks. I also tried connecting an ethernet cord.

We have a netgear n150 router in our house as well but it doesn't connect to my phone or MacBook. That's connected to a Windows PC.
Is this Netgear router your "main" wireless router? That is, is it connected directly to the Motorola modem by Ethernet? Which exact model of the AirPort Express do you have? How do you have the Express configured to work with the Netgear?

Does 2012 airport express support MIMO?

Does 2012 airport express support MIMO? if not, will it slow the internat speed with ipad air?

Welcome,
Probably not, but Apple have stated recently that MIMO is build in to the new WiFi kit, see:
http://www.pcmag.com/article2/0,2817,2426153,00.asp
You may need to upgrade to a new Airport.
Regards,
Shawn

Can airport express send a G and a N signal at the same time?

I have two macs with wireless N in my home, and two pc's with wireless G. Can the airport express broadcast a wireless G and N signal at the same time? or does it need to be one or the other?

I purchased 2 airport expresses today and the answer to this is yes

Murder on the Airport Express (AE 1st Gen cannot find Wireless while plugged in in the same room as the modem, router and Time Capsule

First, the reason for my compounded frustration:
I wrote a lengthy, comprehensive post on this late last night. I submitted it and received a notice at this URL:
https://discussions.apple.com/___sbsstatic___/maintenance.html?start=0&tstart=0
It gave a message: "A yellow sticky bearaing the words, "We'll be back soon." and a typed message reading, "We are busy updating Apple Support Communities for you and will be back shortly." Needless to say, it never came back. This morning as I began trying to reconstruct the very detailed post I wrote last night, the Communities system offered me an opportunity to restore the post from last night. Sadly, it contained only a portion of the first line.
I'm going to try it again. The problem inherent in putting it all in words last night, is that I no longer remember the exact wording of the error messages.
I've never gotten this Airport Express (1st gen, purchased mid 2010) to work. I thought it was working, but working poorly. A green light on the device is, apparently, NOT an indication of connection to the wireless. It wasn't workingl.
Description of devices which use the network:
I have a Broadband network with a modem.
It is connecteed to my 2T Timecapsule (purchased mid 2010).
Connected to that is a 24 port Cisco Router.
Not connecting to that, though showing a solid green light, is my Airport Express (1st Generation, purchased mid 2010)
Connected to the router are many ethernet cables giving hard-wired access to:
Printers (HP 8600 Pro purchased 2012))
MacBook Pro (purchased mid 2010) and
IMAC (purchased mid 2010).
3 Apple TV devices (1st generation purchased early 2011)
1 Apple TV device (2nd generataion purchased August 2012)
Connecting to the Wireless Network are IOS devices (current IOS versions on all)
iPad 2nd generation (purchased the day it was available)
iPad 3rd generation (purchased the day it was available)
iPod (mid 2010)
iPhones (4S)
Description of Layout of Network/House
My home is approximately 70 feet by 25 feet.
All Networking hardware is at one end of the house, the south side.
Airport Express (1st Gen, 2010) has been placed in the middle of the house to boost the wireless access at the north end of the house.
Ethernet cables are installed under flooring with cable ends extending up through flooring, and are availble to all devices with Ethernet ports..
Description of Problem
Investigation of the wireless access dysfunction with the iPad (2nd generation, mid 2010) revealed no connection to the Wireless Network, in spite of glowing green light on Airport Express and Airport Utility screen.
Description of actions taken to correct the problem
Loaded Airport Utility on MacBook Pro.
Airport Express shows green light on screen.
Double clicked on Airport Express Icon
Message that Airport Express was unable to extend the network
Message changes suddenly to something about not finding the Airport Express
Airport Utility searches Airport Express, attempting to read its settings
Message appears: Device not found. Airiport Express was previously part of the network, and offers to let me "forget" the base station.
I exit the error message.
A yellow triangle bearing an exclamation point sits to the left of the Airport Express' Description
Airport Express shows green light (as always)
Clicking the link, "Other AirPort Base Stations" indicates no base stations can be found.
Moved Airport Express to the room at the south end of the house containing all network devices
Plugged it in with clear, completely unobstructed view of Time Capsule.
Light on Airport Express flashes yellow and then turns solid green (like always)
Bring Mac into the room at the south end of the house containing all network devices and the Airport Express with the green light
Close Airport Utility on Mac
Reboot Mac
Open Airport Utility on Mac
Airport Express still shows as it did in 1.1.7. above.
Attempts to check Airport Express' access to Wireless network:
Unplugged Airport Express HEY! THE GREEN LIGHT WENT OUT!!! ;0)
Disconnected all Ethernet cables.
Tested ALL devices for Wireless access.
All devices access the Wireless network extremely well (dot and three curved bars) EXCEPT
IOS Devices tested at the north end of the house. These devices show a blank where the wireless bars should be, and intermittently show a dot.
Followed instructions contained in a similar discussion about Airport Express not functioning:
Unplugged all Networking Hardware
Powered off all Equipment which access the Internet in any possible way.
Powered up all Networking Hardware, one at a time, in the order described in that discussion.
Powered up all Equipment which access the internet, one at a time.
Tested ethernet cablingAll equipment functioning.
Tested Wireless access:
Removed all ethernet cabling
All devices, including IOS devices, access the Wireless Network perfectly EXCEPT any placed in the north end of the house. Those perform exactly as they did in step 3.3.2.
Connected all ethernet cabling.
Plugged Airport Express into socket in the Network Hardware room at the south end of the house. I get exactlyt the same results as before. The lovely green light glows on the Airport Express. Airport Utility reports Airport Express cannot find the Wireless network and also says there are no base stations connected to the internet.
Still in Network Hardware room, I attempt to find other base stations by cabling the Airport Express to the MacBook Pro
Airport Utility shows Airport Express with a green light
I double click the Airport Express Icon
Box says connection is average and status is (green light) Extended Network.
I click Edit
I go through each tab. I note that in the Wireless tab, the Network Mode is as I had set it, "Extend a wireless network".
Under the Network tab I note that "Enable Access Control" is as it should be, NOT selected.
Under the AirPlay tab, I note that "Enable airPlay" is selected.
I click cancel and leave the Edit screens.
Curious to know if Airport Express can find the Wireless network now that the device claims to be functioning as an extended wireless network, I disconnect the ethernet cable from the Airport Express.
I watch the Airport Utility screen closely. Nothing is happening.
With bated breath, I double click on the Airport Express icon.
The popup box shows "extended wireless network"
I click on edit and we start the whole mess over again. (See 1.1-9. above)
Curious to know if cabling the Airport Express to the iMac (almost to middle of house) will offer hope and prosperity to IOS devices at north end, I unplug the Airport Express and carry its now-exhausted little body to the iMac, ethernet cable in hand.
As I unplug the iMac from its ethernet access, I'm informed by Cranky Boy that no way is he going to accept that as a reasonable solution to his problem. He will not live wireless while even one ethernet cable is poking up through a floorboard.
Cranky Boy is reassured when informed that, though the Airport Utility shows the Airport Express connected, merely double clicking on the icon produces the same result as laboriously described in 1.1-9. above.
After quieting Cranky Boy by reconnecting the iMac to the Ethernet, I return the Airport Express to the Network Hardware room.
Again, curious to know ... I reconnect the Airport Express to the MacBook Pro. I want to know if it will exrtend the Wireless network from its position one foot from the Wireless Network.
I close and reopen Airport Utility (as I always do, but forgot to write)
I click on the Airport Express icon (which bears a little green light like the other big boys).
BUT THIS TIME, when I click on the Airport Express icon, the pop-up box says my connection is Excellent, the green light status shows, "Extended Network" and clicking on "Extended Network" produces the same old `Airport Express was unable to extend the Wireless Connection.
I click on the Edit option.
I buzz through all the tabs. I cancel instead of update, leaving everything as it was (as I did the first time)
I decide to go back into edit and select "Internet Options" under the "Internet" tab.
Since I have no idea whatsoever as to what IPV6 is and what it governs, I decide to configure IPV6 to Automatically Connect and then, with a whole new set of opportunities, I leave IPV6 Mode set to "Tunnel" and then I learn that I will get to see what happens when "Enable IPV6 Connection Sharing" is enabled.
I check the other tabs to see if anything has changed in their menus
Jesus Saves and so did I.
Apple updates and so did I.
I am warned that my device and its network services will be temporarily unavailable if I continue.
It seems unaware that I am laughing uncontrollably at the suggestion that my device and its services will be TEMPORARILY AVAILABLE. What? An improvement in performance is warned?
Life continues and so do I.
I breathe deeply to decrease my adrenaline.
Airport Utility flashes a red warning next to the Airport Express Icon and then quickly rethinks the matter and decides to show it as connected.
I click on the Airport Express Icon. This time my connection is only "good".
I click on Extended Network. With a new-found consistency it informs me that my device is unable to extend the Wireless network and it chats with me about using the same Wireless password for my device that is used for the Wireless network access. I did. It is.
I change my settings back to the way they once were, I save like Jesus and Update like Apple
I decide to go back into Edit and modify the settings under the Wireless tab, changing from "Extend Wireless Network" to "Join Wireless Network".
I save.
I click on the Airport Express Icon. My connection has degraded further to "Average"
I click on edit just to see what will happen, but no further information is forthcoming. Settings are as I left them.
I wonder if the Airport Express would extend itself now that it has joined the Wireless Network.
I click the Airport Express Icon.
I click Edit
I change the Network Mode from "Join a Wireless Network" to Extend a Wireless Network. Unfortunately, there was no option for "don't forget where the Wireless Network is!"
I am still "unable to extend the Wireless network"
I disconnect the Airport Express from my MacBook Pro.
After closing and opening Airport Utility, I sit and stare at the Airport Express Icon.
It has no light or error messages
It has a yellow triangle with exclamation point
It has no light or error message
It has a yellow triangle with exclamation point
I finally decide to see what THIS error messages says. It says Device Not Found. Patti Harada's AirPort Express was previously part of your network. Check that it is still in range of your network and is plugged into a power outlet. Click Forget to remove this base station from this network."
I click "Forget". Airport Utility has forgotten the Airport Express ever existed. It has also forgotten how to find it again.
I, however, am unable to forget how much I shelled out for this POS and fear I will never recover from working this intensely and tediously on documenting something so hideously inconsistent in its test results.
I wonder if I should recable the Airport Express to my MacBook Pro
I decide I've had about enough.
I document this ad nauseum in the hopes that someone can read it THOROUGHLY and offer me a solution to my problem. What is my problem? I am so busy fighting off Alligators that I forgot I only came in to drain the swamp! Ah, but I remember now: Cranky Boy can't watch Netflix on his iPad (2nd generation) in the north end of the house.
Any solution that works will do. I'll buy another piece of whatever kind of equipment you think best.

Well, aren't you all that and a bag of chips!!!!
Oh what a relief! What a RELIEF!
That just cleaned up my life. And Cranky Boy is actually smiling!!!
Houston, we've got dots AND BARS!!!
P.S. All my firware and software are always current. If I spent as much time looking for a reset button as I spend checking for software updates, I mighta not needed to work at this!!!!
P.P.S. Airport Utility shows Cranky Boy's iPad as the Airport Express' Wireless Client!!! Who knew?
Thank you so much, m'Lord. I am in your debt. What would you have me do?
Patti in Tucson AZ

Does the airport express need to be on the same floor as the apple tv for best streaming?

Similar Messages

Maybe you are looking for