Does the airport interfere with time warner modem

My roommate has an airport connected to our Time Warner modem that is for his private use. Does it cause interference to the strength of reception I'm getting from the Time Warner modem?

It's possible, and it's also possible that the Time Warner modem/router is interfering with the signal from the AirPort Express.
Most of the time though, this is not a problem, since each router will look for the best wireless channel to use and try to avoid other channels that are already in use.
What is for certain is that your Internet bandwidth, or speed, is being split between the Time Warner modem/router and the AirPort Express when both devices are operating, so all things being equal, hopefully your roommate is at least paying for his share of the monthly Internet charges.

Similar Messages

I want to connect Time Capsule with Time Warner modem

How do you connect Time Capsule to a Time Warner modem? I am upgrading my Wi-Fi to AC and have a Motorola modem without AC, router and WiFi. I could just upgrade the Motorola modem, but I would like to use a Time Capsule. My connection to Time Warner usesd a splitter that goes to a DVR with the other end going to the Motorola modem by way of a coax connector.

Connect an Ethernet cable from one of the LAN <--> port on the Motorola modem/router to the WAN "O" port on the Time Capsule.
Power up the Time Capsule for a few minutes. At this point the amber light will be blinking slowly on the device.
On your Mac....
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on Other WiFi Devices
Click on Time Capsule
The utility will open up and take a minute to analyze the network, then display a window that looks like the screenshot below...except that you will see a Time Capsule on the screen.
Network Name......enter a simple name that you want to use as your wireless network name
Base Station Name....enter a simple name that you want to call the Time Capsule
Password.....enter a password that will be used for both the network and Time Capsule
Verify......verify the password
Cick Next
The utility will set up everything for you. When you see a green light on the Time Capsule, log on to the new wireless network that you have created and enter the password to connect.

Airport Express with Time Warner DSL

A friend just had her Time Warner DSL setup but she really wants wifi in her house. They want to charge her another $50 setup and then $10 more per month. They did say we could just setup our own network by plugging a router into the modem. Can I do this with an Airport Express or do I need to use an Extreme?
And the router mode would be set to DHCP and NAT?

Hello
I am having similar issues setting up my Airport Express.
I have the TWC Cable Modem with built in WIFI. All of that is working fine.
I have connected my ethernet cable ( itested and it has a internet connection) to the WAN port on the AE and plugged it in. After a few moments the light flashes amber.
When I run the Airport Utility from my Mac, it says "Examing..." and then says "An unexpected error occurred. Try again"
I have tried many times, and even reset the AE using the button on the back.
I am at a loss.
Can you help me diagnose further or try an alternative method?
thanks in advance.

Replacing older airport extreme with time capsule

I am thinking of replacing my airport extreme with time capsule. I had a lot of problems setting up airport extreme a few years ago - now it is very reliable. I don't want to have the same issues with time capsule. Can I simply physically replace the airport extreme with time capsule using the same settings as previously
Advice gratefully anticipated

Welcome to the discussion area, pancuronium!
You will use AirPort Utility on your Mac for this operation:
(Macintosh HD > Applications > Utilities > AirPort Utility)
Open AirPort Utility and click Manual Setup
Click the File menu at the upper left corner of the screen near the Apple icon
Click Export Configuration File
Assign a name to the file and save it to a convenient location like the desktop
When you are ready to install the Time Capsule....
Open AirPort Utility and click Manual Setup
Click the File Menu
Select Import Configuration File
Navigate to locate the file that you exported to import all the settings into a new configuration for the Time Capsule
Message was edited by: Bob Timmons

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

Airport Extreme set up with Time Warner

OK. I am experiencing a similar problem as mentioned in a differnt thread, but a bit different. First my Airport Utlility is 6.3.1 so the graphics for settings are completely different. I have an ATV2, Black Mccbook and Ipad2. My problem is when I try to add a third device of the three, especially the Macbook, once I get it an assigned # via the modem (using a White, new Surfboard 6141 and Time Warner as provider), my Ipad gets dropped. Once I even lost the ATV2. The Mccbook is generating its own DHCP address. When I have it on and reboot the modem, it sets it up , but then I lose the Ipad when I turn it back on. My apple extreme in set in Bridge,(by default it is a 2007 model.Has never been a problem when I used Verizon.Where do I go from here. Been playing with this all day. Internet connect is set fort DHCP . Network is set for Bridge. I have no Ivp6 settings.
iMac, Mac OS X (10.7.5), Pioneer 111-D in a Galaxy external box, PreSonus Firebox, Ipad2, ATV2
Like (0)
Level 1 (0 points)
Moncrief
Re: My AirPort Extreme will only let me have one device on the wifi at a time. How do i put multiple computers, phones, and wireless devices on my wifi network at the same time?Mar 22, 2014 5:06 AM (in response to Moncrief)
AND, the Airport Utility in my version looks nothing like what has been pictured previously in this post. I don'y have a screen that allows for Share a oublic address, Distribute etc.iMac (21.5-inch Mid 2011), Mac OS X (10.7.5), Pioneer 111-D in a Galaxy external box, PreSonus Firebox,
Like (0)
Level 1 (0 points)
Moncrief
Re: My AirPort Extreme will only let me have one device on the wifi at a time. How do i put multiple computers, phones, and wireless devices on my wifi network at the same time?Mar 22, 2014 5:11 AM (in response to Moncrief)
Also, I was not given instructions for set up from Time Warner. It was done via a phone call by the technician when they installed the cable. Timw Warner takes no responsibility for owned Routers and how to configure them. They just make sure the modem is probperly feeding the signal. Message was edited by: Moncrief

(using a White, new Surfboard 6141 and Time Warner as provider)
This is a simple cable modem, that will deliver only one IP address to the AirPort Extreme.
My apple extreme in set in Bridge,(by default it is a 2007 model. Has never been a problem when I used Verizon.
Bridge Mode is not the correct setting for the AirPort Extreme. It needs to be in a Router Mode of DHCP and NAT.
Bridge Mode would have been the correct setting with a Verizon modem/router......but the SB6141 is not a router....it is a simple modem.
You can try to make the settings change to see if that will work, but in most cases when you are making a modem change on a network, it is recommended to first reset the AirPort Extreme back to factory default settings (to wipe older and possibly conflicting settings), and then configure the AirPort to work with the new modem.

Getting online with Time Warner Cable (Roadrunner) cable modem

I have wasted a tremendous amount of time with Time Warner since switching from Verizon (New York City), as they are CLUELESS as to how to make a MAC connect to the modem. What settings do I use? It does not find it automatically, I know that much. And they have assured me it's not the modem, but that there's 'something wrong' with my computer. Since it worked fine with Verizon, and another Mac I have which works well in multiple locations with multiple connections also failed, I'm pretty sure there's nothing 'wrong' with my computer. Just tech support ignorance.
Any help?
Thanks
Shelley

Setting up a local Ethernet network
Equipment needed:
Cable/DSL modem: usually supplied by the ISP
Gateway/Router: at least a 4-port router, but you can get them with more ports if you need them. (Alternatively, you can get a switching hub to provide additional ports.)
CAT 5 Ethernet cables: one cable is needed for each device connected to the router plus one to connect the router to the cable/DSL modem.
1. Connect the Cable/DSL modem to the router's WAN port using an Ethernet cable (CAT 5 for 10/100.)
2. Connect each computer to the router's LAN ports using Ethernet cables. If you have network printers, etc. connect them to a LAN port on the router. If the router doesn't have enough ports, then you will need to purchase one with more ports or connect a switching hub to the router.
3. Now, for each Mac open its Network preference pane. Select the Built-in Ethernet port for configuration. In the TCP/IP configuration window set the connection/configuration to DHCP from the dropdown menu. Set your Location dropdown menu to Automatic and the Show dropdown menu to Built-in Ethernet.
4. Shut everything off. First, turn on the Cable/DSL modem and wait for the connect lights to indicate it has connected to the ISP. Next, turn on the router and wait to see if the Cable/DSL modem's communication status light starts to flicker. Also, if there is a status light on the router it should show a connection. Last, power up the computer. If all is well the TCP/IP control panel or Network pref pane should indicate an IP has been obtained from the router, usually in the 192.168.nnn.nnn range. If it's 169.xxx.xxx.xxx then you don't really have a connection.
5. If you have network printers connected each printer will have to be assigned its own unique IP address in the router's address range (usually 192.168.nnn.nnn.) Assign the printer(s) IP addresses above the number of computers that will be connected but within the router's DHCP address assignment range. Consult the router's documentation for that information. Consult the printer manual for how to assign an IP address to the printer. When you install the printer driver and/or Add the printer you will add it as an IP printer or LPR printer and use the IP address you assigned to the printer.

I recently purchased a airport time capsule. My current router offer duel band. Does the Airport offer duel band

I recently purchased a airport time capsule. My current router offer duel band. Does the Airport offer duel band

The Time Capsule automatically broadcasts a simultaneous dual band wireless signal. Wireless devices will connect to the band with the best quality signal based on their capabilities and distance in relation to the Time Capsule.

My iPad is glitching it goes from the Internet to the home screen with no warning I have completed a restore to factory settings still doing it. Please help

My iPad is glitching it goes from the Internet to the home screen with no warning I have completed a restore to factory settings still doing it. Please help

Setup as new (Factory Default)
Settings>General>Reset>Erase all content and settings
Note: if iPad still crash after setting up as new, it's time to make appointment with Apple.

Does the airport time capsule eliminate the need for my cisco linksys wireless router?

does the airport time capsule eliminate the need for my cisco linksys wireless router?

I understand that your network now looks like this:
Modem > Security Router > Cisco/Linksys router > Devices
If you do not want to use the Cisco/Linksys router and use a Time Capsule instead, then your network would look like this:
Modem > Security Router > Time Capsule > Devices

Just moved to new home, updated router and new system with Time Warner and now we cannot get the appl

just moved to new home, updated router and new system with Time Warner and now we cannot get the apple any ideas?

Castle15 wrote:
just moved to new home, updated router and new system with Time Warner and now we cannot get the apple any ideas?
Cannot get the Apple.. what?
Model and actual device you are talking about?
Apple covers a pretty huge range.. If you mean extreme.. did you reset it to factory and start over.. that is always necessary when you change a network. You cannot pick up a router from one home and network and plonk it into another and have it work.. aint gonna happen.
You also need to power down any pure cable modem for 20min or so to get it to forget the old MAC address that captured the IP so the Apple ??? has a chance to work.

How do I use airport utillity with Time Capsule(or any airport extreme) over the internet without mobile me? iCloud has disabled this function?

How do I connect to my Airports/time capsules over the internet using the mobileme function under icloud?

i want to do the same. i tried entering my @me.com account and does not work, but if I tried to go to icloud.com and using my @me.com works
why?
does the Airport express needs to be upgraded as well

Does the Airport express work with apple TV?

does the airport express base station work with apple tv and connected devices, like the same way it would over a wi-fi router?

Yes. The AirPort Express Base Station (AX) is a Wi-Fi router and supports the Apple TV for connectivity.

Does The Airport Express Work with Any Router?

Hi Forum,
i have an old Linksys router G Wifi speeds, does the Airport Express work with this?

The AirPort Express or other Apple routers will not wirelessly extend the signal from your Linksys router, if that is what you are asking here.
If yes, use another Linksys product to insure compatibility between devices.

Will the airport devices and time capsule work with telstras mobile hotspot (Sierra Wireless AirCard 753S Mobile Hotspot)??

will the airport devices and time capsule work with telstras mobile hotspot (Sierra Wireless AirCard® 753S Mobile Hotspot)??

Yes. There are 2 ways you could use these devices:
Wirelessly 'join' the network. This would be slower and doesn't offer extending functionality.
Use an Ethernet cable (through Powerline if you can't run a cable). This is faster and offers extending functionality. I would recommend using Bridge Mode if possible.

Does the airport interfere with time warner modem

Similar Messages

Maybe you are looking for