Does the airport time capsule eliminate the need for my cisco linksys wireless router?
does the airport time capsule eliminate the need for my cisco linksys wireless router?
I understand that your network now looks like this:
Modem > Security Router > Cisco/Linksys router > Devices
If you do not want to use the Cisco/Linksys router and use a Time Capsule instead, then your network would look like this:
Modem > Security Router > Time Capsule > Devices
Similar Messages
-
how do you set the airport time capsule as the primary base station rather than as a network client?
The Time Capsule needs to connect to a simple modem......not a modem/router or gateway type of device that is often furnished by Internet Service Providers.
So, the first logical question here would be......
What is the make and model number of the device that you call your "modem"? -
Need help configuring Cisco/Linksys wireless router to extend wi-fi signal to living room
My U-verse wireless gateway is in the back of our house. We live in an old 1920's home with solid wood walls. For our macbooks, we get a pretty decent signal, but my wife's iPad 2 get's poor wi-fi speeds. I bought a Cisco/Linksys WRT160N wireless N broadband router. I have a wired connection in my living room (going to a 4 port switch) then connected to my DVR. I tried hooking up the new router but ended up getting no signal on the iPad. In fact, it caused other issues. I ended up disconnecting it and re-booting my gateway. All came back fine. This wireless router replaces a similar unit that went out in after a power failure, so I know this can be done, but I forget exactly how I confiured the old one. I would like it to "extend" my signal to the living room, but I am also willing to create a new network (different SSID). Do I need to turn of DHCP? Are there any web sites that can assist me in configuring the router? I wish I didn't have to deal with this. The signal from the RG is great when you are in the back room (20+ down). But my wife gets about 3 down on her iPad in the living room. Thanks in advance.
Hi ,
I was doing some research on how this can be done. It does not appear there is an option in the Cisco router to set it up as an access point, but there are several options you can do to extend your network.
The first thing you can do is just set it up as a router behind router setup, and you will just have two separate networks. Make sure the DHCP pool does not conflict with the U-verse's gateway of 192.168.1.x.
The second thing you can do is connect the Ethernet cable to one of the LAN ports on your Cisco router instead of using the internet port. This should make it work like a smart switch.
With both setups, you want to probably change the SSID, network key, and wireless security settings to the same thing for wireless roaming abilities. That way, anyone that configures their wireless connection will be connected to both networks. Just make sure the wireless channels are not the same, and I would suggest having them at least 5 apart.
Hope this helps.
-ATTU-verseCare -
So...
I have a modem across the house and my room is at the opposite side. I believe that you have to connect the Airport Time Capsule via modem cable in order for you to appreciate the benefits of the boosted up Wi-Fi. However, I want the airport time capsule in my room, without having any extra cables plugged into it AND also benefit from the Wifi boosts, as well as back it up wirelessly.
Is there any way to do this? I was reading up on it and there are search queries bringing up "bridges" and all that stuff, but I haven't found a clear answer on it.
So, to recap:
I want the Airport Time Capsule to not only back up my rMPB and help my wifi signal out, but to do all of this with no additional cables having to be plugged in.
Thanks.Trust me when I say this coming from 20 years of experience.
Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
Download and install Carbon Copy Cloner, clone internal drive to external drive.
Set a schedule to remind you to do it at least once a week, keep it near your charger.
When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
CCC will do the rest.
If you want to boot from it, hold the option/alt and select it Startup Manager.
I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
Make as many clones as you want, keep them time seperated, off site etc. etc.
Cables don't have network issues, clones can be verified in seconds merely by booting from them.
Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
Software problem? No sweat, boot of the clone and reverse clone your problems away.
If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
Most commonly used backup methods -
my computer is macbook white with Mac OS X (10. 6.8), will i able to use the new Airport Time Capsule 2TB and work properly with Time Capsule on my computer to back up wirelessly?
And what does it mean "to administrate" because it was written in requirement of the Airport Time Capsule 2TB ?You must use a Mac running Lion (10.7.5), Mountain Lion or Mavericks to be able to set up the Time Capsule and make any changes to the settings.
A recent version iPhone or iPad could also be used for this task.
From the Specifications on the Time Capsule:
Setup and Administration
iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3 -
I want to boost the Wi-Fi signal around my house. I have a 3TB Airport Time Capsule connected to my Virgin Media modem via a WLAN connection but wonder if an Airport Express device can be used at a remote location purely wirelessly - apart from a power connection obviously?
Does AirPort Express require a wired connection.......if I already have a wired AirPort Time Capsule on the Network?
No, but you will have much better network performance if you do wire the AirPort Express.
The reason for this is that when you try to extend a network using wireless, you will typically lose about a half of the potential speed capability on the network.
There is no network speed loss when you wire the Express.
Here is what Apple's support document says about this:
In the case of a wirelessly extended network, throughput may be reduced to less than 60 percent of that of a single device. The general rule is to keep the Wi-Fi network as simple as possible. You can accomplish this by using the minimum number of Wi-Fi base stations required to service the physical network area and by using Ethernet wherever possible.
Extending the range of your Wi-Fi network by connecting Wi-Fi base stations together using Ethernet is always the best option, and will provide the best throughput -
How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?
Thanks for the additional information.
Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not. -
I have 2 macs and 2 PC (Windows 7) laptops in my home wireless network. (The iMac is hardwired via ethernet to the Airport/Time Capsule; the others are wireless connections using Airport). I want to use the hard disk drive in the Time Capsule as a network backup drive for all 4 computers. Is this possible? Could someone help me by telling me how to configure it? I know I will have to use different backup software in the 2 Windows 7 Laptops? Do I need to use the Windows backup software, or can I use a third party program like Acronis True Image? Thanks in advance for the help
It is your fault, pondini.. all your fault.
I read of all the things that go wrong restoring Time Machine backups.. particularly stupid things like mail, photo libraries don't go back.. etc. And looking through the incredible number of issues people have here, when their Mac finally takes a dive how hard it is to restore.
I restored a test hard disk from a TC.. and it takes ages and ages to even make up its mind to start.
I worked in computer support for ages, but not Macs.. so my experience is ghost.. ghost images.. on large commercial server setups, can stream restore to multiple computers at once.. even doing it computer by computer the image is simple as network boot to restore. But ghost went the way of Symantec.. sigh!! And was destroyed.
A product like clonezilla, Free linux boot cd.
http://lifehacker.com/5078397/clonezilla-backs-up-and-restores-your-disks
Can backup a Hard disk in just about any format.. yet to try it on a Mac to a TC.. but I will. Boot from CD.. instead of your lost Lion partition which no longer exists (because the hard drive had to be replaced) and the DVD they no longer give you, and restore the entire hard disk in a couple of hours .. to the exact image at the point you made the clone.. in any format, with any partitions.
My bet is that it will kill TM .. but you could be right.
It is just the prospect of all those permission changes, photos and mail libraries etc that worry me. -
Okay folks, I need your help out there.
So the nerdy side of me went and picked up the XBOX ONE on release day. Its awesome by the way, BUT..... I cant seem to connect to most xbox live games and absolutely ZERO parties. At first I just thought it was something to do with the xbox itself and would eventually fix itself, but i was wrong. After looking into it on microsoft, i found out that it had to do with my NAT settings on the airport itself. I guess apple and xbox are not compatiable for xbox live and it makes it difficult to have an open NAT setting and is a huge PAIN.
I was able to pinpoint one that the airport time capsule was blocking the IPV6 something or another. Anyways, I unblocked that, and reset the modem and time capsule and jumped on the xbox and now have open NAT settings but still cant connect to multi-player.
Upon further searching, i was told to uncheck the UPNP on my time capsule as well, but have no idea how to find that.
I know it seems confusing, but thats the best i can describe it.
tthanks allBe a long long time before I see an Xbox One.. but whoever told you to uncheck the upnp in the TC.. tell them their dreamin' .. upnp is not support by Apple in any computer or router, never has been.. Apple deliberately wrote their own version called NAT-PMP to do the same thing.. dynamically open ports at the request of an application or client computer.
So there is nothing like that to uncheck.. and as a matter of interest.. there no box to check or uncheck for NAT-PMP either.. since apple do not believe in end user adjustment of settings.. they simply do not exist.
You will have to manually forward all ports required by the Xbox via the TC. For multi-player games you probably need to open more ports than the standard to allow just xbox live. You will need to check the ports required and open them.
OR
Buy a standard vista UPNP compatible router.. and use that.. and simply put the TC in bridge in the network.
I have not seen posts yet about xbox one.. but there are plenty about xbox and ps3 and the fact that Apple really doesn't give a hoot about games consoles.
This is a good basic post for older xbox.
https://discussions.apple.com/thread/5385065?tstart=0 -
How to set up AirPort + Time Capsule On the Same Network but make it so only i use it?
Ok so i am planning on getting the AirPort + Time Capsule in a few weeks, and i have seen many peole talk about how there is a right way and wrong way to set it up because apperently the bad way makes it run slow? Well i have two questions, one is how do i set it up the right way to use it to the full potential to use the new beamforming feature? And my second question which is kind of a problem is that I have internet already but my other brothers use it and i told them about pitching in buy it and they dont want to because they think its pointlesss, so what i want to know is if I can connect it to my existing wi-fi but at the same time like create a diffrent network so that only i can use it? (ex. have my wifi, 2WIRE123 for example, and then some how connect the ethernet cable to the airport + time caplsule and create a new network like 2WIRE124 so they would both basiaclly be using the same internet connection but separated to 2 diffrent networks?) Thank You.
so what i want to know is if I can connect it to my existing wi-fi but at the same time like create a diffrent network so that only i can use it?
Sorry, but no.
If you can connect the AirPort to the 2Wire router using a permanent wired Ethernet connection, then you can configure the AirPort to create a new wireless network with its own wireless network name and password. -
I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.
On your Mac.......
Open Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click on the Disks tab at the top of the window
Click Erase Disk
On the next window that appears, select the Quick Erase option, then click Erase
The operation will only take a few minutes.
Now you are ready to start new backups of both Macs. Back up one Mac first, then back up the other. Do not try to back up both Macs as the same time. -
How can i use the airport time capsule as a external hard drive?
how can i use the airport time capsule as a external hard drive?
Why do you recommend not place things like iTunes libraries or photo libraries on the drive? It was what I am looking for...
I suggest that you ask the experts over in the iPhoto Support Community about their opinions on placing an iPhoto or Aperture library on the Time Capsule....even if you plan to use a wired connection for your Mac and the Time Capsule.
But, if Terrence Devlin answers, be prepared for a lecture about why you should not ever do this.
If you place the iTunes library on the Time Capsule, be prepared for iTunes to give you messages about not being able to find the library.
In addtion, LaPastenague has the answer for you in a nutshell......corruption problems.
Bottom line....the Time Capsule is for your backups.....not "everyday" files and especially not libraries. -
I have failed to Map the Airport time capsule to my windows 7 HP laptop, i followed all the installation steps and i get the error message "Access denied, you do not have permission to access this device, contact network administrator"
Did you install the airport utility for windows?
Is the windows computer set to home as network location.. it will not work if it is set to work or public.
Is the TC setup with all SMB type names, short no spaces and pure alphanumeric. No apostrophe.
Can you ping the TC from your computer? Open a command window and type ping and the tc name or its IP.
No response you will never be able to get connection .. it is usually firewall problem. Turn off firewall and internet security.
If it pings then simply type the IP directly into explorer.. \\TCIPaddress. (eg \\10.0.1.1 if the TC is at default)
That is usually the most foolproof method. -
Can I use the Airport Time Capsule Wirelessly without being connected to my router/mac by ethernet?
Hey
I've recently bought a 3TB Airport Time Capsule, with the sole intention of being able to perform wireless backups.
Is it possible to perform these wireless backups without being connected by ethernet to my modem/existing router? I don't want to use the time capsule as a replacement for my existing router (at this stage) - just for wireless backups of my Macs.
If this is not possible, or practicable, are there other alternatives that I should explore? (non-cloud)
Thanks in advance
Steven
PS
Boring background:
I'm in a rental property with a woefully inadequate number of plugs in practical places. In addition there is only one phone socket. The result being insufficient safe space to have the existing router, and the Airport TC along with the existing electrical items.Unfortunately, Apple designed the Time Capsule to connect to a modem or modem/router using an Ethernet connection.
If you do this, you do have the option of turning off the wireless on the Time Capsule and using your existing wireless for backups. Backups will be automatic this way, in the background. The Time Capsule could be located anywhere an Ethernet cable will reach.....up to 300+ feet or about 100 meters.
The other option.....not recommended and not convenient at all.....is to set up the Time Capsule......without an Ethernet connection and then have the Time Capsule provide a wireless network that would not have Internet access.
So, when you wanted to back up, you would have to manually "switch" to the Time Capsule network for that process, then once the backup was done, manually "switch" back again to your normal wireless network for normal operations. A real mess, not to mention the possibility of wireless interference between the networks that may create other issues. -
I'm a professional photographer and I'm interested in the most recent features of the AirPort Time Capsule. I process a lot of data and much of it never hits my Mac hard drive. Currently I back up to external hard drives, but is it possible to back up files from SD cards mounted on my desktop on to the AirPort Time Capsule for instant access in the future as if the drive were an external hard drive (in addition to being a back up server)?
I appreciate input!If your question is whether Time Machine can back up the data on the SD drives, the answer would be no.
The reason for this is that SD drives are formatted in Windows FAT16, which is not compatible with Time Machine, the backup application included with Macs.
Maybe you are looking for
-
Hi , Is it possible to add a title bar on top of the stacked canvas ? Thanks.
-
Weblogic 5.1 - Unrelated exceptions in application
I have been trying to figure this problem for about an hour now. Apparently it is only happening on heavy load, cannot reproduce it in our QA environment For last 2 weeks webloigc 5.1 sp9 on Sun Jdk 1.3, Solaris 5.8 (our live platform) starts acting
-
Hi, I have created the XML schema interface adobe form with XACF layout. I read it may need some extra software installation in user side too. I have designed the form and everything. It works fine. If I change the layout to ZCI layout, 1) Will it co
-
What's the best codec to edit with in Premiere coming from FCP
Hi everyone I have a project that has been edited in Final Cut Pro on my Mac. The footage was compressed to Apple Prores HQ to edit in FCP. Now I have a new computer loaded with Adobe CC I want to export the FCP project in the best codec possible to
-
Why is the message are for my emails blank
when i open an email, the message area is blank. i can read it when i click on the reply button. my sister accessed my email account using internet explorer. how can i that changed back to firefox.