Does The Apple TV Need To Be Asleep For All Of My Content To Be Synced?

For some reason, it is taking forever to load my content on to the Apple TV?
Do I need to have the Apple TV asleep while my iTunes is syncing the content or does it matter?
Oh and another thing...
All of my music and movies are on the Apple TV but for some reason my pictures from iPhoto aren't showing up.
Is this because it hasn't synced everything yet or am I missing something?
Thanks,
Sam

Well, my ATV has died after 2 hours use
It got so hot I could not comfortably hold it, then the blue select frame (actually all blue pixels) started to appear offset to everything else.
did a disgnosis, everything ok, dis a reset still the same, did a factory restore, and still the same. The initial menu where language is selected has shifted about 1/3 od the way to the right, but the blue stayed put. Called Apple and they are exchanging it. Initial order to delivery was less than 48 hours, but the replacement needs 10 days
Not happy.

Similar Messages

Error: "The file name needs to be specified for all documents."

Hello
I am trying to make sendDocument api call with the following xml:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns0="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://dto.api.echosign" xmlns:ns2="http://api.echosign" xmlns:ns3="http://dto14.api.echosign" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SOAP-ENV:Header/>
<ns0:Body>
<ns2:sendDocument>
<ns2:apiKey>content filtered</ns2:apiKey>
<ns2:senderInfo xsi:nil="true"/>
<ns2:documentCreationInfo>
<ns1:fileInfos>
<ns1:file>CONTENT FILTERED</ns1:file>
<ns1:fileName>test.pdf</ns1:fileName>
<ns1:mimeType>application/pdf</ns1:mimeType>
</ns1:fileInfos>
<ns1:name>Test.pdf</ns1:name>
<ns1:recipients>
<ns3:email>[email protected]</ns3:email>
<ns3:role/>
</ns1:recipients>
<ns1:reminderFrequency>DAILY_UNTIL_SIGNED</ns1:reminderFrequency>
<ns1:signatureFlow>SENDER_SIGNS_ONLY</ns1:signatureFlow>
<ns1:signatureType>ESIGN</ns1:signatureType>
</ns2:documentCreationInfo>
</ns2:sendDocument>
</ns0:Body>
</SOAP-ENV:Envelope>
Which gives me an error: 'The file name needs to be specified for all documents'. Why does it happen? I specified the file name.

I think you need to fix the recipient section, it looks incomplete. Use a tool like SoapUi to build and execute requests to the service.
and/or the sample request in the documentation:https://secure.echosign.com/static/apiv19/sampleXml/sendDocument-request.xml

Does the iphone 6 need a new SIM for Apple Pay?

There appears to be some disagreement on this issue. I activated my AT&T iphone 6 by putting my ip5 sim in the new phone. Everything works normally, but I got a text message from AT&T saying that my phone needed a new sim for all network features to work properly. Some people have been told by AT&T that this has to do with NFC/Apple Pay, that even though Apple Pay is built into the phone itself, it still needs some kind of special secure SIM to authenticate the phone or something. Does anyone have a definitive answer either way? It's not a big deal to just go to an AT&T store and get a new SIM before Apple Pay rolls out, but after experiencing a major activation headache on launch day, I'm reluctant to "fix what ain't broke", so to speak.

I've read nothing that indicates you'll need a new SIM for Apple Pay. However, it seems as if the easiest thing to do is to wait until it rolls out, and see if the SIM you have works. It's not as if being unable to use Apple Pay for a day or two should be a big problem.

Does the apple store (not online) sale cases for the iphone?

i was wondering because tonight im going to an apple store and look for a case i am hapopy with.

Yes, but the two stores in my area have been out of stock on a lot of cases. They seem to be a hot item right now.

Why the groupware connector need Read/Write access for all mailboxes?

Hi,
Does anybody know the technical side of how the Groupware connector creates activities,tasks and contacts?
I know it's not sending them with SMTP, it's work with DCOM,
is it creates it directly in the recipient mailbox!?, and thats why it needs write access?
kind regards,
Pavel, sheynkman.

Hi,
Thanks for the information but i already red this note and the .doc files,
it still not answering WHY you need this permission? to answer this question you need to know the technical side,an answers to question like how the GW put the contacts or the activities in the user's inbox(using DCOM)?
Think about that:
If i have BP's that is not part of my organization, no way somebody will give me administrate permissions on his mailbox.
So if this is really true SAP Didn't think that through.

Infotype screen headers needs to be changed for all the infotypes

Hi Guys,
This would be for a global implementation question.
For the US for a particular region, the screen header needs to be changed for all the infotypes.
The existing field (in the infotype header) is Employee Group which needs to be replaced with employment status.
The know how to change the headers but my question is STAT2 exists in IT 0000 but does not exist in 0001, 0002 0007.........etc
When i go to Table T588J to add an entry , Screen Header 42......,
I get an error " No Field STAT2 exists for infotype 0001"
No field STAT2 exists for infotype 0001.
Message no. PG811
Diagnosis
No STAT2 field exists for infotype 0001.
Procedure
Please contact your system administrator.
Procedure for System Administration
In Customizing, determine the incorrect entry in Personnel
Administration in the Header structure per infotype view, step " Determine infotype header and correct it
I would like to have some inputs from you guys ..... Any Suggessions...
Thanks,
Aastha

Hi Aastha,
Correct me if I am wrong.
First you need to maintain the header in T588J.
Screen header of an infotype is defined in view V_582A_B. We can define one screen header for employee and another for applicant in view V_T588I. The header modifier selected from view V_T588I has a definition in table T588J, which finally gets shown on the screen.
Depending on the transaction class (A = Personnel Administration, B = Recruitment) and the country grouping, a header modifier is assigned to the infotype header in the u201CHeader Modificationu201D view V_T588I.
For example like
Screen Header / Tr. Class / Header modifier
00 / A / 60
In the view u201CHeader Structure per Infotypeu201D (V_582A_B), a header has been assigned to every infotype. It also determines whether the data is valid from the system date or the start date of the infotype record
Hope this is useful.
Regards
RK

Does the airport express need to be on the same floor as the apple tv for best streaming?

does the airport express need to be on the same floor as the apple tv for best streaming?

Yes. Distance can increase interference causing delays in streaming.

Does the apple thunderbolt to ethernet dongle support promiscuous mode ?

Does the apple thunderbolt to ethernet dongle support promiscuous mode ?
I need to use the new Retina MBP as a professional laptop for work, and I need to use Etherreal. Etherreal needs the Ethernet card/dongle/chip to run in Promiscuous mode. I have heard that unblivably the thunderbolt Ethernet dongle does not support this, if so then the laptop will not pick all the packets on the wire... is this true ?
Regs Mark.

Hi Clinton,
Thanks for your reply, However the promiscuous mode function that I am after is a function of the Ethernet NIC hardware and driver not just the OS.
Wireshark allows the user to put network interface controllers that support promiscuous mode into that mode, in order to see all traffic visible on that interface, not just traffic addressed to one of the interface's configured addresses and broadcast/multicast traffic.
Anyone out there actually used/tested the thunderbolt Ethernet adapter to sniff traffic with wireshark (Ethereal), can you please if it can run in promiscuous mode ?
Thanks.

The music sound from my i pod is muffled through my headphone.. does the headphone jack need replacing

Iv had my ipod for few years.. now the sound through the headphone is muffled i brought new ones but the sound is still the same.. does the headphne jack need changing and how much will it cost ?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

What does the apple sign mean when sometimes it shows ?

What does the apple logo mean when sometimes i turn it on it just pops up and goes back to normal??

Ayip,
The Apple logo appearing on your iPod nano is your nano's start-up icon. Normally, when you turn off your iPod nano, you are really putting it into a deep or semi-deep sleep, where it is ready to turn on at the push of a button and resume where you left off in your Now Playing list.
If, however, you leave your iPod in a sleep mode for some time , it will shut down. To turn it on again, you'll need to hit the center button (deep and semi-deep will wake up with any button press). When turning the iPod on from a shut down state, it will display the Apple logo while loading your music iPod software.
Hope this helps!
Sincerely,
-FD

Does the Apple Remote work with Keynote '08 to make presentations with?

The subject pretty much asks the question, but I'll repeat it here again:
Does the Apple Remote work with Keynote '08 to make presentations with?

Although it does not provide the same abilities as a "professional" clicker it does do the job. For example your computer still has to be in front of you, or you need to be pointing at it. Steve Jobs does not use an Apple remote as his clicker, but as a easy solution, it does the job.

Does the Apple TV have any purpose if you are only using Bluetooth and cables/cords, not WiFi.

I have a 5th Gen iPod Touch (32 GB), and a HDTV (with 3 HDMI ports), but very limited internet. Does the Apple TV have any uses without WiFi, can I just use cables and/or Bluetooth. I want to use Airplay without WiFI, how?

Currently no.
I believe in iOS 8 Apple may produce a kind of 'peer to peer' wifi without the need for a router - but not sure your Tocuh can run iOS 8...

Why does the apple logo come on then my ipod turns off

why does the apple logo come on then my ipod switches of when im trying to turn it on

That sometimes happen if:
> The battery is low
> the device need a reset : Do this by holding down the "sleep" button witht the "home" button

HT5622 We are a family of 4, each with their own apple device. Is it best for us to set up individual apple ID's for things like ITunes? If we do can the same e-mail address be used for all of them or do we need to create e-mails for the kids? Thank-you

We are a family of 4, each with their own apple device. Is it best for us to set up individual apple ID's for things like ITunes? If we do can the same e-mail address be used for all of them or do we need to create e-mails for the kids?
Thank-you

1. Yes, it is.
2. You may be able to use the same address by adding a plussed suffix to it, such as [email protected] If that doesn't work, create separate emails.
(103279)

My iPod touch was stolen and recovered. I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly

My iPod touch was stolen and recovered. I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly appreciate

If the thief enabled activation lock on the device, then there is nothing that can be done. Only the password for the Apple ID that it is locked with can disable activation lock.

Does The Apple TV Need To Be Asleep For All Of My Content To Be Synced?

Similar Messages

Maybe you are looking for