Does the Bluetooth and airport..

I know this is probably a dumb question but i really want a mac before i graduate high school and i am saving up everylast penny to get one and i was wondering does the bluetooth and airport come built into the computer or do you have to buy it extra?
any help would be appreciated
thank you

They are both standard on the MacBooks. No need to add anything.

Similar Messages

Bluetooth and Airport have disappeared on my Imac G5 20"

So it just disappeared one day, and I haven't seen it since. It happened a while back, but I'd like to sell the computer and it would be better if I had the Bluetooth and Airport back. From what I can tell from the forums, it's a software issue. I've tried some of the remedies people have suggested (pulling the power cord, etc... clear the PRAM, ditch the bluetooth.plist, plus probably a few others), but to no avail. Any other suggestions, or is it a lost cause? It's a 2.0 HHz PowerPC G5 with 1 GB RAM; 10.5.6

Option 1
Restart the computer while holding down the Option key. This will tell the computer to look for bootable drives. If it finds your normal startup disk, select let, then click the right pointing arrow to boot up the computer. Now open up System Preferences> System> and select your normal Startup OS as the default startup disk.
Option 2
Reset your PRAM. Press and hold down the Command Option P R keys while starting your computer. You will hear the startup chime. continue holding down those keys until you hear the startup chime a second time. Release the keys. If the computer restarts, you will need to reset your Date and Time. It might be time to replace your PRAM battery. The G5 iMacs require a 3 volt CR2032 lithium watch/camera battery like below:
http://eshop.macsales.com/item/NewerTech/CR2032/
You can find these batteries at Walmart, Kmart, Target, most local drugstore chains, for between $3-$5, or at Radio Shack for $12-$20.
If you have any G5 iMac model EXCEPT the iSight version, you can probably do the battery install yourself. Watch this video on upgrading your iMac's RAM to show you how to remove the back of your iMac, if you don't already know how:
http://eshop.macsales.com/installvideos/imac_g5_mem_m/
While you have the back off, use a can of compressed air to blow the dust out the vents at the bottom of the iMac, the fans, and anywhere else you can. Also inspect the 28-30 capacitors on the logic board. Look for dark spots, if they look puffy or swollen, or leaks.
Option 3
Reset the SMC by removing all cables (USB, Firewire, Ethernet, Modem, Power cord) from the back of your computer. Let it sit for one minute. Press and hold the power on button on the back of the iMac while plugging in the power cord. Release the power on button. Count to five, the press the power on button again.
Option 4
Place your original, came with the iMac when purchased install disk, into the slot on the iMac, press and hold the C key while pressing the power on button on the back of the computer. (If you have upgraded your OS from when you purchased your iMac, example your iMac came with OS 10.3 installed, and you're now using OS 10.5, then use the OS 10.5 Retail Install disk that you had used to upgrade your OS instead of the original, came with the iMac disk.)
Continue holding the C key until you see the OS starting to load. DO NOT do an OS installation. At the top Menu bar, select Utilities or Utility, and pull down to Disk Utility. On the left side of the window that opens,select your normal OS drive. Click First Aid at the top middle of the window if it isn't already selected. Click Repair Disk from the lower right area of the window. When that is done, click Repair Permissions to the left of the Repair Disk button you clicked earlier.
When that is done, quit Disk Utility. From the top Menu bar (I think its under Utilities) select the Start Up Manager, and choose your normal boot volume as the startup disk. Restart the computer. If successful, and you've rebooted from your normal startup disk, eject the install DVD/CD, and you're good to go.
Good luck.

Hi i received the nano 7th gen for Christmas and I only seem to get 5 hours of battery life. I use the Bluetooth and Nike app so I expect more drain on the battery. But I got more time out of running with my iPhone. Does this sound normal? I thought I sh

Hi i received the nano 7th gen for Christmas and I only seem to get 5 hours of battery life. I use the Bluetooth and Nike app so I expect more drain on the battery. But I got more time out of running with my iPhone. Does this sound normal? I thought I should get close to 30 hrs of just play time alone.
ALso, my wife got me the Belkin armband to run with the nano but I sweat through the band resulting in the back of the iPod to get wet. Surely this is not good. Anyone have a recommendation for an armband that keeps moisture away from the pod?

iPod Nano are small and they don't use Wi-Fi access so you get less power time on a Nano. As for iPhone, since you got apps, Wi-Fi + 3G access, and everything else, they give you more time so you can keep using. Nanos are ment to listen to music, listen to radio, view your photos, watch videos (without Wi-Fi) and since you got BlueTooth on the nano, it counts as wireless access so it drains your battery faster.

Whenever I log in to mum's airport wifi (it has wep) after a few hours it won't work and says connection timed out. The wifi and airport also is invisible to mum's macbook ***?

whenever I log in to mum's airport wifi either with my iphone or macbook pro (her aiport express uses wep security) after a few hours it won't work and says connection timed out. The wifi and airport also is invisible to mum's macbook which means she can't login. If I plug her computer or mine direct into her virgin modem - it does work... I can't even find her express in airport utility to reset it any ideas what is going wrong?

Hello Sally,
Welcome to the Apple Support Communities. There are a few things to try when dealing with a Self-Assigned IP address. The following articles will assist with troubleshooting Wi-Fi issues all around.
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Mac OS: How to release and renew a DHCP lease
http://support.apple.com/kb/ts1920
Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
http://support.apple.com/kb/TS1317
Regards,
-Norm G.

Battery power, Bluetooth, and Airport all shotdown

There has been a dvd jammed in my superdrive for about a week now and today I decided to get it out. I took off the bottom unibody panel, removed the superdrive, and took the disc out. When I put it all back together I see that my battery is not powering the computer anymore, the bluetooth isnt available and is reads that there is "no airport card installed". All of which were working before I removed and reinstalled the disc drive.
Any solutions?
I would apprecieate so so much.

power works now, but bluetooth and airport still not functioning at all.

I have a problem with my Iphone 4s since I did my first update at your Itunes, the bluetooth and the WiFi it is not workinhg anymore. It is sad that companies like apple are not able to support thier sofware and business. I went to a apple store at Sout

I have a problem with my Iphone 4s since I did my first update at your Itunes, the bluetooth and the WiFi it is not workinhg anymore.
It is sad that companies like apple are not able to support thier sofware and business.
I went to a apple store at South Park, Charlotte NC,
and found out the worst customer service (in my case)
They don't have answers and don't understand about "dont let any customer go away sad or mad"
I explain to them that I did everything they said to fix the problem, even to dounload the iOS 6.1.3
that was supposed to fix the problem.
they said fix the problem in other phones but not in mine.
So here I am with no wifi and bluetooth, with apple technicians and experts that don't know what to do with the problem that the sofware they developed cause in my iphone 4s.
and the solution is for me to pay $199.00 US dollars for a problem that I did not cause.
wich means to buy something else from apple to fix a problem that it is not my fault.
Great! what a convenient solution.
I would like to have an answer from you guys and see if someone there have a better answer for me that shows support, values and integrity as a grest company with solutions for your customers.
Dont think that I want a new phone, I want mine fixed if is possible.
Thank you very much and God Bless you!

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

On opening some pdfs in new tab, get a box labeled Adobe Acrobat with a ? in it. Right click on the link gets the pdf. What does the box and ? mean. Running W7, FF 10.0.2, Adobe Standard 9. Thanks

On opening some pdfs in new tab, get a box labeled Adobe Acrobat with a ? in it. Go back to the original link, right click on the link gets the pdf. What does the box and ? mean and why do I get it when trying to open some pdfs? Running W7, FF 10.0.2, Adobe Standard 9. Thanks.

Assuming that you are using IE10 / IE11 on Windows: http://support.microsoft.com/kb/2716529

TS3198 After doing the backup and restore how do you know if the phone is unlocked if you do not get the message: "Unlock Complete. Congratulations, your iPhone has been unlocked. To set up and sync this iPhone, click Continue."

After doing the backup and restore how do you know if the iphone is unlocked if you do not get the message: "Unlock Complete. Congratulations, your iPhone has been unlocked. To set up and sync this iPhone, click Continue."

If you don't get the message, your phone is NOT unlocked.

Why does the color and or tone of my image change?

Why does the color and or tone of my image change after working in LR for a couple of hours? I open LR and everything looks fine - work for a couple of hours on the same shoot - but then the pictures start to look flat or greenish cast as time goes by. All the files get flat and the greenish cast after a couple of hours - the ones already worked on and the newer ones I'm pulling up to work on. RAW files downloaded from a Canon 30D. Also exporting to PSCS2 as PROPhoto results in a flat image. I switched back to export AdobeRGB.

Hola - thanks for the reply - yep - closing and then opening LR helps - but can't do that all the time after processing 3 or 4 files.
One reply was a corrupt monitor color profile - So I deleted that one and loaded a new adobeRGB profile. That helped a little also for a while - I then reloaded my monitor drivers and refreshed them - that help for a day - the greenish cast is back It works fine on my laptop for now. The same pictures that look greenish in LR look great in Canon DPP. So it probably wasn't the color profile or monitor drivers. My issue started with the small scale previews so I bumped that up. Still have the issue. I finished up a project and now going to uninstall and reinstall LR. Let's see what happens with a fresh install. andy.

What does the square and capital n mean in safari

What does the square and capital n mean in safari it's right next to the battery meter

HI and welcome to Apple Discussions...
If you have installed any new apps, (games?) that could indicate a symbol for it.
Carolyn

My iPhone 4s turns off and won't turn on again without doing the on and home key. Only a month or 2 old. Why?

My iPhone 4s shuts off and won't go on again without doing the on and home button hold. It's only 1-2 months old. Why?

Make a "Genius" appointment at an Apple Store to have the machine tested.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

HT201210 I have tried to restore my i phone via itunes after doing the update and it keeps giving unknown error occurred (3194) please help

I have tried to restore my i phone via itunes after doing the update and it keeps giving unknown error occurred (3194) please help

Hello Sam-marchesi,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694#error3194
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
Best of luck,
Mario

Extract assets doesn't extract the 0.5x or 0.25x files but does the 2x and 3x, why?

Dear Photoshop Community,
I'm trying to extract assets but this doesn't extract the 0.5x or 0.25x files but does the 2x and 3x, why?
I get the original file, and 2 folders, one named scaled-at-200 and one named scaled-at-300.
I am using Photoshop CC 2014 on windows 7 and i don't get any other extracted assets.
However using Photoshop CC 2014 on my windows 8.1 machine i get all the assets and two additional folders scaled-at-50 and scaled-at-25.
Why is this? Is there a fix for this issue?
Thanks,
Craig Williams.

Hi Ganesh,
Thank you for your reply.
However I don't think the problem I got is related to the boldFont object. I actually want all the column hearders to be bold so I did the following codings and it works:
Font headerFont = table.getTableHeader().getFont();
Font boldFont = new Font(headerFont.getFontName(), Font.BOLD, headerFont.getSize());
table.getTableHeader().setFont(boldHeaderFont);
It is actually working - it changes all the headers (except for the column0 which has its own hearderRenderer) to be bold. So I think the object boldFont itself is ok.
My problem is that when I set the boldFont to the myHeaderRenderer for colomn 0, I just can't that that column header to be bold. I guess the problem is related to the header renderer.
-wdyaoj

Does the imac need airport to connect to the internet??? Or can it just connect via any router?? thanks

Does the imac need airport to connect to the interent of can I just connect it via any router?????

you should be able to use any router.

Hello I was updating my phone earlier today and it had the connect to iTunes sign on it and I cant get past that sign. I put it up to iTunes and its still doing the same and on my computer it is saying it cant reset my phone. what do I do?

hello I was updating my phone earlier today and it had the connect to iTunes sign on it and I cant get past that sign. I put it up to iTunes and its still doing the same and on my computer it is saying it cant reset my phone. what do I do?

Hi sarahlovebell21,
Thanks for visiting Apple Support Communities.
If you see the "connect to iTunes" screen on your iPhone, that means its in Recovery Mode and needs to be restored.
You can find more information and steps to restore your iPhone here:
If you can't update or restore your iPhone, iPad, or iPod touch
Best Regards,
Jeremy

Does the Bluetooth and airport..

Similar Messages

Maybe you are looking for