Does the built in alarm work if iphone is off

i have tried to do this and it dosent work all other phones seem to have this ability  or am i just doing it wrong

As mentioned above, if you slide to power off you're alarm will not work. The same would happen if you took the batteries out of an alarm clock.
The reason other phones can do it when 'turned off' is because they are not turned off. Unless you take the battery out, other phones are always on to communicate their location to the host network.

Similar Messages

  • Does the microsoft surface rt work with iPhone/ipod?

    Does the microsoft surface rt work with iPhone/ipod?

    I have an iphone and was told that the surface rt cannot be sycned to my iphone like my
    Music directly. I think thats crap and am deciding whether or not to get the surface as my laptop. Do you know if it is able to sync music from it to my iphone?

  • Does the built in firewall work with other cards

    Hi,
    First post and probably a dumb one, but couldn't find an answere: does the built in firewall (MSI 7030) work exclusively with the built in NIC? I am using a WiFi Netgear MA111 dongle - but couldn't force the firewall to work with it. It does work fine with the built in NIC but I don't want to drag the cable through my flat.....
    BTW: great forum, as I switched from Abit NF7S to the MSI K8N - i started to use this one and found some really great ideas!!!
    Regards,
    Bartek

    no.  the firewall is part of the nic.

  • Does the Sony Smart Watch work with iPhone 4S?

    Solved!
    Go to Solution.

    Hello Penny,
    Welcome to the Sony Community.
    The Sony Smart Watch doesn't work with iPhone 4S but however it's compatible with most Android™ (2.0 and above) phones via Bluetooth® connection. See www.store.sony.com for details.
    Regards,
    Charlie

  • Can a spyware be used against an iPhone or does the built-in antivirus protect us?

    In a recent research (link below) it was established that many repressive governments have used a spyware program called Remote Control System (RCS) that was developed by a company called Hacking Team to spy on and target activists.
    My question is: can this spyware and similar ones really be used against my iPhone or does the built-in antivirus actually protects me?
    Additional information:
    Jailbreak was NOT performed on the device. 
    Link:
    https://citizenlab.org/2014/02/mapping-hacking-teams-untraceable-spyware/

    The report you cited makes no mention of iPhone or iOS, and the exploits cited involve the use of "Adobe Flash in Word document" with an .exe file payload. Such exploits are nothing new. Since neither Adobe Flash nor .exe files run on iOS, the report's applicability to iPhones is nil.
    Similar "research" and its many variants often describe a method by which malicious software can be installed on an iPhone by altering its firmware. Doing so is commonly referred to using the catchall "jailbreak" term and cannot be accomplished without physical possession of the iPhone.
    Short of physical possession of your iPhone nothing remotely resembling what is often portrayed in popular media can be accomplished. It's all Hollywood B.S. Despite that fact, many people desperately want to believe otherwise.
    On the other hand physical possession of an iPhone for an amount of time sufficient to modify its firmware, several minutes at least, makes literally anything possible. If an iPhone must pass from its manufacturer to an intermediate entity, one of the 21 alleged "government users" of the subject software perhaps, prior to an end user taking final possession of it, I suppose it can be a legitimate concern. If you suspect that occurred, restoring the iPhone as a new device will remove any alterations, but it could also render the iPhone permanently inoperable. Either outcome will eliminate any uncertainty.

  • Does the plantronics marque m155 work with the iphone 4S?

    does the plantronics marque m155 work with the iphone 4S? can you use siri with the bluetooth headset

    http://www.apple.com/support/headset/

  • Does the photo transfer app work to move photos from an ipod touch to my computer?

    Does the photo transfer app work to move photos from an ipod touch to my computer?

    See:
    Copying personal photos and videos from iPhone, iPad, or iPod touch to your computer

  • Two part question 1) what happens if you  sign into messages beta on os x lion 10.7.5 after it expired? does the whole application not work or just imessage? 2) does installing messages beta on os x lion 10.7.5  delete ichat?

    Two part question
    1) what happens if you  sign into messages beta on os x lion 10.7.5 after it expired? does the whole application not work or just imessage? can you stil use AIM, jabbar, google talk, or yahoo?  if you open messages beta does it immediately tell you that messages beta expired?
    2) does installing messages beta on os x lion 10.7.5  delete ichat or just transform ichat into messages beta giving the illusion that ichat is deleted?

    Hi,
    It was never completely clear whether it was just hidden or whether Apple ran a download page for iChat 6.
    As the Download for Messages Beta was separate and "Deleted" iChat it would seem it would be another download for iChat 6.
    iMessages will not function as it is only an Account type within Messages and iChat 6 does not have it.
    Therefore messages on the iPhone will not sync to the Mac. (until you get Mountain Lion and Messages in that OS X version).
    Mountain Lion and it's full version of Messages will not sync the iMessages that have happened in between the 14th December 2012  (end date of Messages beta) and the Install of Mountain Lion if you decide on that route.
    8:51 PM      Sunday; May 5, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Does the built-in DAC on my 2007 mid yr iMac support 96/24 audio as it supplies signal to the headphone jack? (is there a reason to export audio via optical jack then to an external DAC?

    does the built-in DAC on my 2007 mid yr iMac support 96/24 audio as it supplies signal to the headphone jack?  If so, is there a reason to export audio via optical jack then to an external DAC then to stereo?

    My suggestion to work around this problem would be to hook up an Airport Express. The AE also has an optical out the same as your iMac. As long as your wireless connection is robust enough you should be able to stream from your iMac to your AE and then have the optical cable connect between your AE and your DAC, which then connects to your Integrated Amp/Receiver/Pre-Amp (depending on your system configuration).
    I assume because you are using the optical out and connecting to an external DAC that you are looking for a high level of Audio quality ?

  • Does the Built-in Windows FTP Client Support a Secure Connection?

    I have set up Server 2008 IIS w/ FTP. I set the SSL setting to require a secure connection. However, I can't connect to the FTP server from the built-in Windows FTP client. I CAN get it to work in FileZilla after modifying my connection properties.
    Does the built-in Windows FTP client support secure connections? I received a request to set this up so our internal employees can share files with external customers. Many times our customers are unable to install any kind of third party software on their
    computers.
    Thanks in advance for the help.

    Hi,
    Based on my known, the built-in FTP client does not support secure connections.
    Similar thread:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/9500d7c2-cf18-4ab1-a0cb-1e277deab33c/is-it-possible-to-connect-to-iis-75-sslrequired-ftp-site-via-windows-explorer-or-ie-?forum=winserverNIS
    If it does not help, you could ask in IIS forums as Meinolf Weber mentioned.
    Hope this helps.
    Regards.
    Vivian Wang

  • How does the shake to shuffle work on ipod touch 4g?

    So, i want to know how does the shake to shuffle work, i opened the music player and started playing a song but when i shake the ipod, nothing happens, the option of shuffle on the screen is still white and when the song currently playing ends, the next one in alphabetical order starts. The shake to shuffle option in settings is On.

    The iPod can only tether via Bluetooth for internet connectivity to an iPhone. It will connect to other phones to tether for internet connectivity if the phones can act like a wifi hotspot.

  • Does the new ipad gps works without 4g reception

    does the new ipad gps works without 4g reception?

    Yes.
    More GPS information...
    GPS signals are separate from and completely unrelated to both the Internet and the cellular telephone network.  GPS signals come directly from the GPS satellites.  They provide latitude and longitude information to GPS receivers.  Navigation software then takes that latitude/longitude info and converts it to land mass, roads, bridges, highways, buildings, etc.
    Most navigation software stores the maps right in the iPad/iPod/iPhone but a disadvantage is that the maps must be periodically updated (perhaps once every two years).  The Internet is not required to use the system but it is required to update the maps.
    Some navigation software gets the maps from the Internet and requires an Internet connection to function but an advantage is that the maps are always up-to-date.
    The WiFi+3G/4G iPad and the iPhone both have a GPS receiver.  The WiFi-only iPad and the iPod do not and these devices require an accessory.

  • In what QOS does the receiver SOAP adapter work BE or EO?

    Hi,
    In what QOS does the receiver SOAP adapter work BE or EO?
    My guess is that it is by default EO, if so how do i make it work like synchronous?
    There is no option to set it explicitly.
    Thanks]
    Shakthi

    Siva,
    In receiving adapter you can't set the status. The receiving QOS is set in the pipeline by using the Sender Comm.channel QOS.
    So for example in SOAP to SOAP scenario, if you set the Sender comm.channel as BE, then through out the Pipeline till it reaches the Receiver Comm.channel the QOS will be considered as BE only( Even though you didn't explicitly said to the Receiver comm.channel).
    Hope it helps!
    raj.

  • Why does the sync button not work in itunes when my ipod touch is connected

    why does the sync button not work in itunes when my ipod touch is connected?

    It's working for me in Acrobat XI:
    I'd try logging into Acrobat.com from your browser, and log in with your Adobe ID. There may be a problem there:
    workspaces.acrobat.com

  • How does the DAQmx read.vi work in producer/consumer mode

    Dear all,
    I have one question: how does the DAQmx read.vi work in producer/consumer mode ? 
    I mean if i set the acquisition samples quantity is 5000,(see the enclosed picture), how does the DAQmx read.vi acquire the samples ?
    5000 samples one time ?
    And how does the write. vi work ? Also 5000 samples one time ?
    Look forward to your reply.
    Thank you.
    Attachments:
    producer consumer mode.png ‏28 KB

    It will read 5000 samples per channel.
    The Write Measurement File just writes whatever you give it.  It you send it 5000 data points, it will write the 5000 data points.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

Maybe you are looking for

  • Importing 8mm tapes,

    I converted 8mm tapes using a digital8 camcorder but think the camcorder has issues, because I just picked up a 8mm camcorder and footage looks better, not noisy like on the d8, anyhow now I have a canon elura set up with pass through ready and an an

  • PR PO Reoprt

    Hi, I want a report in which 1. PR 2. PO to that PR 3. PO Qty 4. Received Qty if Infoset Query is used. Then tell Me table should be used for PO - PR Relationship REgards, Pardeep Malik

  • Brand New MacBook Pro - HOT HOT HOT To hot for lap

    I have had my MacBook for only 24 hours and i think something is wrong. Its so hot on the bottom i cant put it on my lap. i bet its at least 90 degrees. is this ok. It cant be.

  • Z97 Gaming 3 and m.2 storage - which ssd?!

    hi guys, I'm using the Z97 Gaming 3 motherboard and very happy with it so far. I'm planning to to update to a m.2 slot storage for my OS (Windows 8.1) soon so I need an advice. which m.2 products are support by this motherboard? which m.2 ssd models

  • Installation successful, but inoperable

    Flash player is not being recognized. The installation says it is successful But when trying to use, it says no flash player is installed. Tried going through internet explorer 10 and goggle chrome.  Tried disabling security software and firewall, st