Does the cannon mx410 support ipad printing of notes from the notepad

Does the cannon mx401 support iPad (Via wi-fi) printing from the notepad area?????
I need help getting mine to operate..
.thnx
. Bea

According to the link below that printer doesn't support Airprint.
See requirements for AirPrint and printers that support AirPrint here:
http://support.apple.com/kb/ht4356
You may be able to print some content using a printing App from the App Store. See Print n Share, etc.

Similar Messages

  • I want to be able to erase the pictures out of my phone but not from the cloud

    I want to be able to erase the pictures out of my phone but not from the cloud and I still want them to go into the cloud. How can I do that?
    Thanks!

    Are the pictures transferred to another device? Note the following quotation from http://support.apple.com/kb/ht4486
    The photos you upload to My Photo Stream are stored in iCloud for 30 days to give your devices plenty of time to connect and download them.
    If you are wanting a cloud storage option for photos you may want to investigate something like Flickr.

  • HP 7640 web services disabled and I can only print locally, not from the net !

    Web Services Test Reslults:"No problems found"Router: Verizon Quantum gatewayPrinter is connected via Wi-Fi and printing can be done through the router or directly via Wi-FiBoth Router @ 192.168.1.1 and printer panel report printer IP 192.168.1.161, MAC address 34.64.a9.44.ff.aaAND . . . under current configurationWeb services : disabledSo . . .How do I get this pos working properly ?HP website provides NO SUPPORT, just a run-a-round.---  

    Hey ,  Welcome to the HP Support Forum.  I see that you're unable to use ePrint or enable webservices with your HP ENVY 7640 e-All-in-One Printer.  I would like to help.  Have you tried the basic ePrint/webservices setup method as recommended by HP?  If not, give that a shot first.  If this is not new to you please read on, I have some more suggestions that might enable this feature for you.   I recommend you set a Manual DNS on your printer.  Here's how:  Click on the HP ENVY 7640 icon on your PC desktop (note that I've used screenshots for a different printer, but the steps are essentially identical) to access the HP Printer Assistant.  Click on the Embedded Web Server link (EWS) and then click on the network tab as indicated below:   Next, click Wireless and then IPV4 Configuration as indicated below:     Next, click on Manual DNS Server and input the numbers exactly as indicated below, clicking on Apply to complete this aspect of your setup:   For the next step, you can use the EWS 'Webservices' tab to enable webservices/ePrint or enable from the printer's front panel by touching the  icon.  Touch OK to allow this feature to activate and also to allow for automatic printer updates.   If you were able to complete the above-noted steps without issue, you will be ready to send your printer ePrint jobs. For more information on how to setup a custom ePrint address click here.  If you're an Android or iOS device user, click here for more information on how to use the HP ePrint app.  In its most basic iteration, you can send your printer ePrint jobs from any web-ready device by emailing content you want to print directly to your printer's @hpeprint.com address.  Please let me know the result of your troubleshooting by responding to this post.  If I have helped you resolve the issue, feel free to say "You rock!" by clicking the 'Thumbs Up' icon below and clicking to accept this solution. Thank you for posting in the HP Support Forum.  Have a great day!

  • I am trying to attach multiple photos to an email from my ipad 2. I can see how to do it from the camera and camera roll option,but not from the photos program. What am I missing? Thanx so much!

    I am trying to attach multiple photos to an email using ipad 2. I can see how to do it using the camera and camera roll ap...
    But not using the photos ap..which is where the photos are. Any help would be appreciated.!

    In an album in Photos touch the Edit button and then touch the desired photos (up to 5). A blue check appears in each selected photo. Next touch the Share button at the upper left and select Mail. This starts a email with the photos attached.

  • I live in Qatar, but bought my Ipad 3rd generation in the U.S, My iPad updated its software from the latest 5 to 6. It is stuck in "Could not Activate iPad" your ipad could not be activated because the activation server is temporarily unavailable.........

    why is this happening.....really thinking hard on not purchasing more apple products in future.....

    Did you manage to fix it? I'm having the same issue for a couple of days.

  • Dashboard Prompt using values not from the table

    Hi,
    I have a requirement from the client to design a dashboard report like the following.
    Dashboard prompt will have 4 filters, three filters come from the table, but the fourth filter will have 3 values not from the table. The fourth filter will have values like "Report with Sales Amount", "Report with Purchase Amount", "Report with both Purchase and Sales". I have three different Table reports designed for each of the fourth filter choices. But how do I implement it, both in the dashboard prompt as well as navigating to the rite report based on the selection.
    Is my approach correct.
    Thanks for your time and help.

    The fourth prompt where you have "Report with Sales Amount", "Report with Purchase Amount", "Report with both Purchase and Sales" you pull a dummy column into the prompt and write a sql in show.
    would be something like
    SELECT Case when 1=0 then "Dimension- Customer"."Cust Name" else 'Report with Sales Amount' end FROM Sales UNION SELECT Case when 1=0 then "Dimension- Customer"."Cust Name" else 'Report with Purchase Amount' end FROM Sales
    and in the prompt set a presentation variable say var_criteria
    Now create report2 for with a some randomn column and another column will have the values that you want to display for example 'Report with Sales Amount'
    Create a filter on the 2nd column and reference the presentation variable var_criteria and default it to 'Report with Sales Amount'
    On the dashboard page in the section place the report and enable guided navigatoin by selecting report 2.
    Please let me know if you have any questions.
    thanks,
    deep

  • Cannon 8800F not working with OS X yosemite 10.10.1  . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

    cannon 8800F not working with OS X yosemite 10.10.1  . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

    Have you done any of the following?
    http://support.apple.com/kb/PH18614 OS X Yosemite: Reset the printing system
    Repaired permissions & restarted your comp after the installations of the drivers?
    Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
    What to do when you can't print
    =============
    not working with OS X yosemite 10.10.1
    Per your profile
    Mac OS X (10.7.3)
    Conflicting info:  Please update/correct your profile so that you can receive the correct troubleshooting suggestions.  This will assist the users in trying to help you.  Thank you.

  • HT1766 Why does my pc say that there is no drivers for my new Ipad Air. I did a backup this night from the two week old Ipad Air that I smashed the front?

    Why does my pc say that there is no drivers for my new Ipad Air. I did a backup this night from the two week old Ipad Air that I smashed the front?

    Drivers are iOS specific....meaning if your old one had iOS 7.0.6 and your new one 7.1 then it needs different drivers.
    Is your iTunes up do date? if not, then updating it may help.
    You can also try using a different usb cord and port to see if that triggers the driver download.
    or, if that doesn't work, try going into your control panel, add/remove programs. Look for 'apple mobile device service' and uninstall that. THen plug your iPad in and it should reinstall.
    If that doesn't work, go back into the control panel but uninstall iTunes, and apple mobile device service and apple application support, then redownload and reinstall iTunes and see if that gets your drivers fixed.
    Another way to do that is go right click on 'my computer' 'properties' and go to 'device manager'
    plug your iPad in and do you see it show up in the list? YOu may need to click some of those little plus signs to open up the lists. If you see your iPad, right click on the name and you should see an option to update the driver.

  • I have an iPad mini and an iPad 2. I can print email to my HP 6510 from the mini, but NOT from the iPad 2. Both are on the same wi-fi network. I have tried everything I can do including unplugging everything, restarting, etc.  Can anyone help?

    I have an iPad mini and an iPad 2. I can print email to my HP 6510 from the mini, but NOT from the iPad 2. Both are on the same wi-fi network. I have tried everything I can do including unplugging everything, restarting, etc.  Can anyone help?

    Thanks so much! My grandaughters played games on the iPad over Xmas and one of their moms said shed restricted their access! Guess they forgot to enable again. Thank you again! Karla

  • Does anyone know of an iPad app that can lock the iPad after a period of months (i.e., 6 months)?

    Does anyone know of an iPad app that can lock the iPad after a period of months (i.e., 6 months)? I am looking to give ipads to contestant participants and need a way to automatically lock the device once the set duration (measured in days, weeks, months or years) is complete. Does anyone know of an iPad app that locks the device after a period longer than 24 hours (ike most parental control apps)??
    Thanks for any help!!

    It's called "SelfControl". It can be a little hard to learn to use but it's worth the effort.

  • In iPhoto (09) I can add a description to a photo which will display when running the slideshow, however when I sync the Album to my iPad and I run slideshow the description does not display, WHY?

    In iPhoto (09) I can add a description to a photo which will display when running the slideshow, however when I sync the Album to my iPad and I run slideshow the description does not display, WHY?

    I'd ask that on the iPad forum.

  • What is the best all in one printer that works with the iPad

    The best all-in-one-printer to use with the ipad mini

    Any that advertise Airprint compability will work for printing. Note that you can't use the scanning or faxing features of an all-in-one with an iPad.
    See the Airprint printers on the Apple store site:
    http://store.apple.com/us/ipad/ipad-accessories/printers#!
    Matt

  • Will the iPad Mini print to / scan from the HP 7280; with USB cable?

    Will the iPad Mini print to / scan from the HP 7280; with USB CABLE?
    Thanks, everyone...
    ---sue h (Apple novice)
    iPad Mini

    https://itunes.apple.com/us/app/genius-scan-pdf-scanner/id377672876?mt=8
    I use this app. It takes a photo and turns it into a PDF (the photo that you take with your iPad/iPod)

  • TS3988 I have set up all the iCloud on my iPad and iPhone both are the latest version but they don't seem to sinc with each other does this take some time? I am connected to the Internet via wifi do I need to turn the mobile data to on on both maybe??

    I have set up all the iCloud on my iPad and iPhone both are the latest version but they don't seem to sinc with each other does this take some time? I am connected to the Internet via wifi do I need to turn the mobile data to on on both maybe??

    Welcome to the Apple Community.
    You need to turn the services you want to sync (calendars, contacts etc) on on both devices from settings > iCloud.

  • Why does the printer suddenly not recognise the computer

    why does the printer suddenly not recognise the computer

    salkenward
    Welcome to the HP Community Forum.
    This issue is frequently caused by a driver malfunction although the problem could be just about anything.
    You didn't provide any information.
    The good news:  You can still help yourself and there is lots of help available, including -- in many cases -- the printer software for your computer so you can reinstall and be on your way again.
    Install Full Feature Software – Printer
    Take a look at the helpful videos if you need help with the installation.
    Take a look, too, at the Troubleshooting / How-to / Solve a problem sections for more help on just about everything "printer".
    There is a new "Print Doctor" in town for many printer models.  If there is a new print Doctor program for your model, it will be in your printer software webpages under Utilities or Diagnostics.
    Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Click Accept as Solution when the Answer is a good Fix or Workaround!
    Kind Regards,
    Dragon-Fur

Maybe you are looking for

  • Cannot export to WMV from CS4

    This is a problem I've had consistently with CS4 when I go to export and render video timelines to windows media format.  If the video is longer than about 10 minutes it renders partially and gives me an API error message and stops rendering.  This p

  • Problem in mir7

    Dear Expert while taking mir7 it peaks diffrent value which is diffrent from po & gr value . i can not get the diffrence in value please help me to solve the issue.

  • Setting the white point and gamma

    I've heard that when calibrating your display you should set the white point and gamma to native. What is the difference between setting the white point at 65k and the gamma at 2.2? Thanks in advance for your time Rick

  • Class com.ibm.jsse.be configured for a TrustManagerFactory : Help needed

    Hi I am getting the following runtime error when trying for a HTTPS connection from my java code. Runtime Error : Class com.ibm.jsse.be configured for a TrustManagerFactory: not a TrustManagerFactory Action: 4 Class: com.americanexpress.teen.common.f

  • IPod synced with other library - won't sync, unless I erase iPod

    I recently switched jobs and copied my iTunes on my old Macbook to my iPod. I know have a new job and want to sync my iPod with my new MacBook Pro. But it won't let me, as an error pops up saying that the iPod is currently synced with another library