Does the cluster have a log file?

I understand each server in a cluster has a log file, but does the cluster itself have a log file?

          I dont think there is one for cluster...
          "Jake Kroto" <[email protected]> wrote:
          >
          >I understand each server in a cluster has a log file, but does the cluster itself have a log file?

Similar Messages

We are looking for a software which converts SWF to MP4, we found many software which does the job but issue is file size is not optimize. We found Adobe captivate 6 which gives optimum quality with good output but thing is we do not have batch process i

Hi
We are looking for a software which converts SWF to MP4, we found many software which does the job but issue is file size is not optimize.
We found Adobe captivate 6 which gives optimum quality with good output but thing is we do not have batch process in captivate 6. so we request you to create a plugin or give a best option which have batch render quality and optimize in file size,

Captivate is e-learning development software not a dedicated video convertor, you are better off trying something like Adobe Media Encoder or Super.

How much info about the cache-cluster does the client have and What would you recommend about putting the cluster behind virtual ip

Hi,
I will appreciate if someone can point me to some documentation as to how app-fabric client library accesses the app-fabric cluster.
What I have found so far is that the list of hosts provided in the client configuration are used as an entry point into the Cache-Cluster. By connecting to one of hosts, the client will download information about all the hosts constituting the cluster.
Since a named cache is distributed across the entire cluster, and the data can be stored on any node. How does the client decide which node it should connect to, to get the data from. Does the client have enough information to know which host has the data
or the client will connect to one of the nodes, if the node has data, it will serve it otherwise redirect the client to the node that has the data.
I also would like to know what do you say about the idea that we would like to put our cache-cluster behind a virtual ip, so that if needed, we can take down nodes or add more nodes. In fact the virtual ip will that of a load balancer, but we don't plan to
use it for load balancing purposes but the idea is that the client will have the virtual ip address and we can repoint this IP address, if we need to take out a node for maintenance reason.

I'm not sure about the reason for putting the cache servers in a VIP, but one of the reasons why the cache servers should be made known to the servers is because of auto load balancing and throughput
Imagine i have 10 cache servers running on 1G ethernet links, theoretically i have 10G usable bandwidth and the clients will be able to manage and load balance if any of the cache server fails or have performance issues
Now if all these were parked behind a VIP
1. The LB now does the load balancing, which may not be optimal
2. The LB may not have 10G upstream and 10G downstream, even if it has, this is quite a waste of resource\

I get the following error: Error log file location: /Library/Logs/Adobe/Installers

I get the error U44M1P7 Error log file location: /Library/Logs/Adobe/Installers
Does anyone have an idea what I need to do? Thanks

Did you ever find a solution? I am in sort of the same boat. I even had an Adobe rep try to help me. For some reason my Adobe App Manager does not work on my Macbook. It orginally did but one day it just would not launch. After numerous attempts of uninstalling and re-installing without success, the only workaround solution was to create another user on my Macbook and install the Application Manager on that user's account. I can then download the apps / programs and updates from there. When I log out of that user and back into my main account the Adobe programs work....well most of them. I have noticed that certain programs, like Muse will launch and work correctly under my second user account but it will not luanch without error on the main account.
The fact that no one at Adobe seems to be able to provide a solution is frustraing. Everything worked fine one day, then its all messed up. Switching users is not an ideal solution at all.

The format of Audit log file

We have a perl script to extract data from Audit log files(Oracle Database 10g Release 10.2.0.1.0) which have format as bellow.
Audit file /u03/oracle/admin/NIKKOU/adump/ora_5037.aud
Oracle Database 10g Release 10.2.0.1.0 - Production
ORACLE_HOME = /u01/app/oracle/product/10.2.0
System name:     Linux
Node name:     TOYDBSV01
Release:     2.6.9-34.ELsmp
Version:     #1 SMP Fri Feb 24 16:54:53 EST 2006
Machine:     i686
Instance name: NIKKOU
Redo thread mounted by this instance: 1
Oracle process number: 22
Unix process pid: 5037, image: oracleNIKKOU@TOYDBSV01
Sun Jul 27 03:06:34 2008
ACTION : 'CONNECT'
DATABASE USER: 'sys'
PRIVILEGE : SYSDBA
CLIENT USER: oracle
CLIENT TERMINAL:
STATUS: 0
After we update the db from Release 10.2.0.1.0 to Release 10.2.0.4.0, the format of Audit log file had been changed to something likes below.
Audit file /u03/oracle/admin/NIKKOU/adump/ora_1897.aud
Oracle Database 10g Release 10.2.0.4.0 - Production
ORACLE_HOME = /u01/app/oracle/product/10.2.0
System name:     Linux
Node name:     TOYDBSV01
Release:     2.6.9-34.ELsmp
Version:     #1 SMP Fri Feb 24 16:54:53 EST 2006
Machine:     i686
Instance name: NIKKOU
Redo thread mounted by this instance: 1
Oracle process number: 21
Unix process pid: 1897, image: oracle@TOYDBSV01
Tue Oct 14 10:30:29 2008
LENGTH : '135'
ACTION :[7] 'CONNECT'
DATABASE USER:[3] 'SYS'
PRIVILEGE :[6] 'SYSDBA'
CLIENT USER:[0] ''
CLIENT TERMINAL:[7] 'unknown'
STATUS:[1] '0'
Because we have to rewrite the perl script, could anyone tell us where we can find the manual to describe the format of the Audit log file.

Oracle publishes views of the audit trail data. You can find a list of the views for the 11.1 database here:
http://download.oracle.com/docs/cd/B28359_01/network.111/b28531/auditing.htm#BCGIICFE
The audit trail does not really change between patchsets as that would constitute underlying structure changes and right now, the developers are not allowed to change the underlying structure of tables in patchsets. But, we can change what may be displayed in a column from patchset to patchset. For example, we are getting ready to update the comment$text field to display more information like dblinks and program names.
I personally don't like overloading the comment$text field like that, but sometimes when you need the information, that is the only choice except to wait for the next major release :)
As for the output of the audit log files, those can change between patchsets because of bugs that were found and some changes to support Audit Vault. My apologies out there for anyone that is reading the audit files written to the OS directly, I would recommend using the views.
Hope that helps. Tammy

How to increase the size of Redo log files?

Hi All,
I have 10g R2 RAC on RHEL. As of now, i have 3 redo log files of 50MB size. i have used redo log size advisor by setting fast_start_mttr_target=1800 to check the optimal size of the redologs, it is showing 400MB. Now, i want to increase the size of redo log files. how to increase it?
If we are supposed to do it on production, how to do?
I found the following in one of the article....
"The size of the redo log files can influence performance, because the behavior of the database writer and archiver processes depend on the redo log sizes. Generally, larger redo log files provide better performance, however it must balanced out with the expected recovery time.Undersized log files increase checkpoint activity and increase CPU usage."
I did not understand the the point however it must balanced out with the expected recovery time in the above given paragraph.
Can anybody help me?
Thanks,
Praveen.

You dont have to shutdown the database before dropping redo log group but make sure you have atleast two other redo log groups. Also note that you cannot drop active redo log group.
Here is nice link,
http://www.idevelopment.info/data/Oracle/DBA_tips/Database_Administration/DBA_34.shtml
And make sure you test this in test database first. Production should be touched only after you are really comfortable with this procedure.

Does the Ipad2 support .epub (ebook) files?

Does the Ipad2 support .epub (ebook) files?
And: does it support websites built with flash?

Epub boooks are supported. There are a number of different ebook apps, and generally books are locked (due to digital rights management systems) to the app/retailer that they were bought from e.g. iBooks (Apple), Kindle (Amazon), Barns & Noble, Nook - so won't be able, for example, buy a book from Amazon and read it it iBooks, you'll have to use the Kindle app.
Flash is not supported on any iOS device (iPad, iPhone, iPod Touch). Some apps claim to (e.g. Skyfire) but judging from the reviews the results are varied. More info on why it's not supported here http://www.apple.com/hotnews/thoughts-on-flash/

What is the extension for debug log file name?

Hi,
1) Please let me know what is the extension for debug log file....
is it .dbg or .log ?
in one of the sr the service engineer asked to put .log as the extension is this correct?
here is what he said...
a) Enable the following Profiles at user level:
OM: Debug Level = 5
INV: Debug Trace = YES
INV: Debug Level = 11
INV: Debug File = [directory value from above query]/logfilename.log
(make sure that you have write permission for this file and directory)
WSH: Debug Enabled - Yes
WSH: Debug Level - Statement
2) do the end-user (for whom trace is enabled) need to have read and write permissions on the directory and the log file?
Thanks
Raju

user652672 wrote:
1) Please let me know what is the extension for debug log file....
is it .dbg or .log ?
INV: Debug File = [directory value from above query]/logfilename.log
(make sure that you have write permission for this file and directory) It is what you set in the value of "INV: Debug File" profile option (according to the above value, it will be logfilename.log).
2) do the end-user (for whom trace is enabled) need to have read and write permissions on the directory and the log file?No, just make sure the directory is writable by the oracle and applmgr users.

How to delete the data in archived log files

hi
how can i delete the enteries in archived log files. and what is the disadvantage of deleting archived log enteries.

There is no documented way to delete data stored in archived log files: you can only remove the archived log files if needed.

Connecting a powerbook G3 to the internet via ethernet and a DSL modem. Does the G3 have the ability to do this?

I am trying to connect an older powerbook G3 (M4753) to the internet via ethernet and a DSL modem. Does the G3 have the ability to do this? I'm having alot of trouble. G3 Dialog box states the DHCP server will populate IP address, etc. It does not. The G3 also insists I enter the DHCP client ID.

Anything useful in the following articles?
http://support.apple.com/kb/TA20782
http://support.apple.com/kb/TA20785
Jan

Does the iMac have an AUDIO IN besides from the built-in mic?

Does the iMac have an AUDIO IN aside from the built-in mic?
Also, are any special cables needed?
Thanks,
John

Hi
You should be able to check by going to about this mac from the Apple menu. Then click the more info button and then the system report button. Next, click on audio tab to the left. If you don't have an entry for built in input then you probably don't have line-in in your mac. As already mentioned though you should be able to defiantly find out with the model and year.
Hope this helps

Does the macbook have a screen cover that makes it so the person next you cannot see what you are doing?

does the macbook have a screen cover that makes it so the person next you cannot see what you are doing?

Hello 23435,
Welcome to the Apple Support Communities!
I understand that your iPhone was knocked out of your hand and now it displays blue and black colors on the display. It does sound like this iPhone may need to be evaluated for service. If you would like more information about this process, please refer to the attached web link below.
iPhone Other Repair Options - Apple Support
Have a great day,
Joe

Is the disk equal to log files and other questions?

In the web page http://www.oracle.com/technology/documentation/berkeley-db/je/GettingStartedGuide/introduction.html#dplfeatures, there is a statement, " The checkpointer is responsible for flushing database data to *disk* that was written to cache as the result of a transaction commit ".
I wonder if the disk here means log files under the JE home directory.
From my understanding of these documents and other web resources, the check pointer is to write records in Cache to Log files (disk), and then cleaner is to reorganize and then to remove unused log files. For the records in a Cache, they are brought from disk to Cache by querying the index organized in a B-Tree structure, and the In-Compressor is to delete some empty internal nodes of B-Tree.
I wonder if the above is right to describe relations among these components, check pointer, cleaner, B-Tree and In-Compressor.
Thanks for your help!
Best,
Jiangfan

Jiangfan Shi wrote:
I wonder if the disk here means log files under the JE home directory. Yes.
I wonder if the above is right to describe relations among these components, check pointer, cleaner, B-Tree and In-Compressor. Yes.

Does the MBA have an optical audio out (toslink)?

Does the MBA have an optical audio out (toslink)?

The MacBook Pro and iMacs have digital audio out routed through the headphone jack. A physical converter (costing a few cents) must be used to connect a regular TOSLINK cable.
The MacBook Air apparently does not have this feature.
As to true Thunderbolt 'adaptors' I have yet to see any hit the market. I would suggest not holding your breath while waiting for useful Thunderbolt technology to appear--one day perhaps, but not now. I would love to be proven wrong about this--I could really use the Thunderbolt<->FW800 adapter

Does the Blackberry have built in memory?

Does the Blackberry have built in memory?
available memory?
additional memory options?..Add-ons/ins?
(spec. Blackberry Curve 8900)

I believe the device has 128MB of device memory, 1Gb of built in storage memory and can accomodate up to a 32GB MicroSDHC memory card.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Does the cluster have a log file?

Similar Messages

Maybe you are looking for