Does the CP1025 work with Airport Extreme?

Hi, I am unable to get my CP1025 (not CP1025nw) connected to the Airport Extreme (AE) to be able to print through the network. The AE recognizes my other printer - HP Photosmart C3188 immediately and sets up automatically. So, I am assuming my network is ok. Initially, AE was able to recognize the CP1025, but failed at the last step in Bonjour.(error 1797 you do not have sufficient access to your computer to connect to the selected printer). I then upgraded the firmware on the CP1025 and now AE does not recognize the CP1025. Bonjour says "no bonjour printers are available". I have been trying this through my laptop (win7) and desktop (xp sp2), but it's not working. Installed and uninstalled bonjour and drivers several times. Also tried to replace the setup for c3188 with cp1025 through the Printer properties/ports window. Would it help if I used the older firmware? Where can I find it? How else can I fix this? Thanks ------------ CP 1025 firmware: 20120130 CP1025 driver: 3.0 (16 Mar 2012) Bonjour for windows v2.0.2 Airport extreme version: 7.6.1

It appears that you are using Bonjour on a Windows platform to get the printer connected wirelessly.
The best way to get the Laserjet cp1025 connected is to use WPS or a USB to wireless setup.
Instructions for both can be found by clicking on Installing the Printer Software on a Wireless or Wired (Ethernet) Network.
To use USB to Wireless, you will need a Windows or Mac OS X (10.5, 10.6, or 10.7) connected to a wireless network.
Installing a USB to wireless setup printer can be very tricky and buggy using Bonjour installation.
The steps in the link are for the Laserjet cp1025 and should get you going with getting it to connect. The Laserjet is only designed to be connected to a network with USB to wireless or the router's WPS button (if it has one).
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

Does AirPlay work with AirPort Extreme?

Does AirPlay work with AirPort Extreme?

The AirPort Extreme does allow AirPlay to "pass-through" but it does NOT support receiving AirPlay streams to be played back through powered speakers or an audio receiver as it does not have any built-in audio circuitry like the AirPort Express models.

Any current inkjet printers work with Airport Extreme 802.11g Basestation?

Does anyone know if there are any printers out there currently being sold that actually work with Airport Extreme (802.11g)? Not the latest 802.11n basestation, but the UFO-shaped Extreme g basestation? I recently tried the HP DeskJet D4160 and it does not work at all with it, although my deprecated HP 940c works just fine. I need to replace the 940C, and I don't want to have to buy and return 20 different printers in order to find one that actually works... Any help is appreciated!
Thanks

Checkout the list on iFelix's site.

Will a WD hard drive work with AirPort Extreme to connect with an iPad Air

Will a WD hard drive work with Airport Extreme to connect by a iPad Air

If you already have an AE and a WD drive .. the best idea is plug it in and see on a mac in airport utility is the drive recognised.
If not you have problems.. if it is formatted correctly (Not NTFS mainly) then it can be a drive that is not compatible.
assuming it works get your ipad and pay for filebrowser or at least download a test copy and see how it goes.
Always the best way to find out.. try it.

Will a wireless printer work with airport extreme?

Will a wireless printer work with airport extreme? Such as an HP Photosmart D110.

Yes, it will as long as it is within wifi signal range of the Extreme. Of course, you'll need to go through the printer setup sequence. NOTE: The D110 is not AIRPRINT compatible, so it will not print from ios operating systems that are installed in mobile devices such as iphones, ipads, ipods. However, there are Apps that are available for non airprint printers, but their quality and effectiveness are questionable.

How well does the Ipad2 work with the verizon 4g hotspot?

How well does the ipad2 work with the verizon 4g hotspot?

WoW Macbook Pro 2011 15" i7 2.3Ghz quad core AMD 6750 hi-res AG OSX gameplay with FPS and temps
MacBook Pro 17in. Review (Early 2011)
http://www.youtube.com/watch?v=hiEDf_l0PqY

Does the curricula work with or without the SAP software?

Hi! As a faculty member... does the curricula work with or without the SAP software? Is it better to lecture with the software or can I get by without it?
If I'm part of a member university how many students can I provide access to the software? Are there any limitations?
Also, I'm based in Philadelphia with connections to the 2nd largest university... Can I pick my UCC or will it be assigned to me? I'm open to either one!
Many thanks!
Richard

Hi Everyone,
One key intent of this community is to present curriculum resources for lectures of either type - with access to SAP software for the professor and students in classroom and lab environements OR without access to the software.
The former, with SAP software access, requires formal membership in our long-standing University Alliances program (UAP). With this membership, professors receive special access to curriculum elements designed to be dependent on use of SAP software (an of course access to everything in our community).
The latter, without SAP software access, requires simply registration in this new University Alliances community (UAC). This community makes many resources available to professors to integrate into their business and IT-related lectures and projects - including pre-recorded demos, videos, expert and analyst reports, articles, white papers, customer reviews, references, and case studies, etc.
The curren state of the site is like a start-up. There is a lot on offer, but we also expect that there is a lot more out there to grow. We know there are many elements which we can make available to the worldwide community once they are contributed. We are actively approaching professors in our networks now for items.
We would be grateful for anyone that we have not contacted to come forward and offer content of their own, for the UAP members or for the greater UAC.
Thanks and Best Wishes
Bob LoBue

Does the SMPTETTPlugin work with Strobe?

Does the SMPTETTPlugin work with Strobe, or just OSMF?
http://blogs.adobe.com/accessibility/2011/10/new-work-on-closed-captioning.html

**Update**
I gave MAC filtering a try. It worked great without the range extender. However, for the range extender to work, it's MAC address must be setup in the router for access. When I tried to connect to the network on a computer without a registered MAC, and with the range expander on, it let me pass right through.
So, I'm assuming since i was connecting to the router through the range expander, which had a registered MAC, I was able to get access. So wireless MAC filtering was a no go since anybody wanting to connect could do so via the range extender.
For me...WEP/WPA encyption doesn't work. Wireless MAC filtering doesn't work. But what DOES work, is not broadcasting the SSID while not having any wireless security encryption in place. Nobody can wirelessly connect to your network without knowing the SSID, which in a way is more or less like a password. Just remember to change the SSID on both the router and the extender to something that you, or anybody else in the area, has not used in the past.
I hope all this info is helpful to somebody.

Will sony s-air sw10ti work with airport extreme?

Hi There,
I have the Sony S-Air SW10 Ti which has a great sound but the Aerial on it for DAB Radio is rubbish, it does have a docking station which also sounds good but no other connection parts. Would this perhaps work with " Airport or Aiport Express/Extreme" ?

Thanks - I am glad that you explained your situation a liitle more - although there is no direct way to connect to the wi-fi of the Sony - the Airport Express (not the Extreme) has an audio out jack that can be connected to any system - this would be an indirect way of using wi-fi with your Sony - see this link - http://www.apple.com/airportexpress/ - you could also incorporate Apple TV into your setup - see this link - http://www.apple.com/appletv/ - but as you can see, both of these choices involve AirPlay and Itunes which may limit your options - and because they are beyond the scope of this discussion group, I would suggest that you re-word your questions and ask them in the appropriate disccusion group in this forum - I hope that this clarifies things somewhat.
Charlie

Printer that works with Airport Extreme Base Station

Hi. We are very new to Macs (2 weeks). Have a Mac Book and AEBS. Both work fine. Our HP printers, however, only work if connected directly to the Mac Book. I'm informed that we need to get a printer that works with the AEBS if we wish to have wireless printing. If anyone can recommend a printer that works with AEBS, we'd be grateful. Thanks.

Hello Jungle-cat. Welcome to the Apple Discussions!
Check out the following iFelix site to see which printers are known to work (not not) with the new 802.11n AirPort Extreme Base Station (AEBSn).

How do i set up time capsule to work with airport extreme base to extend wireless network?

i have a airport extreme base, how do i set up a time machine to extend the wireless network i have with airport extreme? i have also 3 airport express's connected to the same network to extend my wifi all over my house. thanks in advance.

Much better graphics, thanks.
You can leave the Time Capsule connected by Ethernet from the Linksys and configure for a "roaming" network as mentioned previously.
To do this, open AirPort Utility - Manual Setup
Click the Wireless tab below the icons
Wireless Mode = Create a wireless network
Wireless Network Name = Same name as the AirPort Extreme
No check mark needed next to Allow this network to be extended
Radio Mode = Same setting as the AirPort Extreme
Channel = Automatic
Wireless Security = Same setting as the AirPort Extreme
Wireless Password = Same password as the AirPort Extreme
Confirm Password
Click the Internet icon, then the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Update to save settings and allow the Time Capsue to restart
Then power down the entire network
Wait a minute or two
Start the modem first and let it run a full minute
Start the AirPort Extreme the same way
Power up the switch
Power up the Time Capsule for a minute
Keep starting devices one at a time about a minute apart
Now, your computer will automatically pick up a wireless signal from either the AirPort Extreme or Time Capsule, whichever device is closer and providing the stronger signal.

Airport card does not work with Airport Extreme when security is turned on

I have an iMac running OSX 10.4.11 with an Airport card installed (firmware version 9.52).
I recently replaced my Netgear wireless router with an Apple Extreme Base station and now I am not able to connect my iMac to the wireless network when WEP security is turned on - I get an error from the Airport Setup Assistant when I attempt to connect to the wireless network.
It works fine if the wireless security on the Extreme Base station is turned off.
Please help and thanks in advance.
Motasim

First, I highly recommend that you switch to either WPA or WPA2 as WEP is no longer considered secure. If you must use WEP, I suggest that you try the following:
o Re-create the Network Name (SSID) on your AirPort Extreme Base Station (AEBS)
o Try using 128-bit WEP, with a 26-Hex character key for the encryption type.

What is the best way to make 3g/4g simcard work with airport extreme

I live in Mumbai, India and I am tired of the state of broadband connection over here. I have vodafone 3G Data only SIM with me which I use via a 3G dongle that plugs into my mac. It has a decent speed and I would like to use it as a primary internet connection across the 3 iPhones, 2 iPads, a Mac and 2 apple tvs at my home.
I have a 2014 airport extreme and i want to know what hardware do i need to make the 3g sim work with it? like put the sim in the hardware/adapter and then plug it into the wan port of the airport extreme and let the AE handle my dhcp so that i can access 3g internet from all my devices?
also, i was something 4g compatible as 4g is on the roll in India. it doesn't have to be a wireless router on its own but something that can dial the connection and provide internet access to the AE via the wan port.
thanks.
Neerav

The only reason I mention it would be configure your network for a roaming instead of extended setup. The number one advantage over an extended is bandwidth performance ... aka speed.
For example, I have a Cisco RVS4000 wired router as my main Internet router. I am fortunate that my 2-story home came pre-wired for Ethernet. I have placed an AirPort Extreme and a Time Capsule, connected by Ethernet back to the Cisco; one on each floor to provide a seamless wireless network for an assortment of wired/wireless clients. With this setup, I am able to stream HD TV content throughout the house. Mine is an example of what you can do with a roaming network.

Multiple devices no longer work with Airport Extreme

I can’t get multiple devices to work with my Airport Extreme any longer. Normally, I have 4 wireless devices with my Airport Extreme: MacBook Pro, iPhone 5, Sony Wireless Blu-Ray Player, and Windows Laptop. On a daily basis, I use the MacBook Pro and iPhone 5 at the same time on the network. I have even had all 4 devices on the network without a problem.
Problem: Since last night, I cannot use any of the devices on the network at the same time. Every time I try to use two devices, I am asked to login into to my ISP and the device currently on the network is booted off.
Additional info: I live in an apartment complex and use the complex’s ISP. Unusually, since yesterday another device (my guess is a neighbor’s Airport Express) has been showing up in my AirPort Utility. I cannot access that device because it is password protected.
Attempted Solutions: I have tried a soft reboot, hard reboot, and factory reboot of the Airport Extreme, but still have the same problem. I have also cycled the modem on a repeated basis.
The ISP does not think it is their problem as I can still connect to them through either directly plugging into the modem/outlet or through the AirPort Extreme. The ISP has great customer service and are usually very helpful, so I don’t think they are trying to blow me off.
Perhaps, my AirPort Extreme’s settings are off.
If anyone can provide me with a possible solution, it would be greatly appreciated.

I have tried a soft reboot, hard reboot, and factory reboot of the Airport Extreme
A factory reset on the AirPort Extreme would have configured the AirPort Extreme to act as a router, providing normal DHCP and NAT services for your network.
But, the symptoms that you describe indicate that the AirPort Extreme's Router Mode settings may be configured for "Off (Bridge Mode)".....a setting in which another router at the apartment complex would be responsible for allowing multiple devices on your network to connect.
Using your MacBook Pro, we need to check the Router Mode setting on your AirPort Extreme as follows:
Open Finder > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon
Click Edit in the smaller window that appears
Click the Network tab at the top of the next window
Please check the current setting for Router Mode and report on what that setting might be.......either DHCP and NAT......or "Off (Bridge Mode)".

HP LaserJet 5000 doesn't work with Airport Extreme

My HP LaserJet 5000 is connected to a Linksys router which is connected to the AE. My HP DeskJet is connected the same way and works fine. Although the computer recognizes the Laser printer it will not print. The error message that comes up is "Printer Not Responding". Does anyone have any suggestions?

This all leads me to believe that the problem is with our router. We have a 4th generation Airport Extreme. Outside of this issue, it has worked very well for us for several years. Our modem is a Motorola SB121.
I should note that everything was working fine up until a few weeks ago. As far as I know, nothing changed within our setup. She had lost connectivity in the past for a few days at a time randomly, but it came back.
These issues are almost not worth wasting the time spent on them.. you can go out and buy an $80 router.. probably cheaper in the US and have it running again in 5min.
Your careful analysis looks correct.. the blame is squarely on the AE.
I am guessing you thought (wrongly as it turns out) that the latest firmware would be the best.
It is highly likely firmware update somewhere along the way to the latest caused the problem.
Try going back to 7.6.1 firstly and then 7.5.2 . .after each downgrade.. factory reset.
Use all short names, no spaces and pure alphanumeric for all names in the AE. ie .. do not use apple names..
So AEGen4 is a great name .. AE24ghz is a great name for 2.4ghz wireless and AE5ghz is a great name for 5ghz.. yes, do separate names for both wireless channels whilst this issue continues.
Try and report back if it helps at all.

Does the CP1025 work with Airport Extreme?

Similar Messages

Maybe you are looking for