Does the Developer Workplace also run on 64bit systems?

I know that this is not a supported platform, it seems that the developer studio is inly supported on XP 32bit. But I like to make full use of my 4GB RAM and therefore install the whole NW CE 7.1 environment including JEE server and development studio on a 64bit system (Linux or Windows Server 2003). Does this work or won't it even install?
Did anyone try this before? Will there be a new version in the near future that is supported to run on 64bit systems?

Hi Srivastava,
thanks for your reply. At least there is some hope now that it will run on 64 bit but from the various OSS notes I still do not get a clear picture. The notes you explicitly mentioned seem to be rather old. Now I found note 953763, which says:
Supported Operating Systems for Development Systems
If you want to install a SAP NetWeaver CE development system, the following operating systems are supported:
Microsoft Windows XP Professional SP2 (or higher) (32-bit)
Microsoft Windows 2003 Server SP1 (or higher) (64-bit)
From that note I guess that also the installation of NetWeaver Developer Studio will work on Windows Server 2003 64-bit.
Is anyone using this particular configuration?

Similar Messages

  • I am able to log into itunes, but the homepage doesn't appear.  The program is also running very slow.  Help!

    I am able to log into itunes but the homepage doesn't appear.  What is causing this?  The program is also running very slow.

    Your  music will only be where you put it.
    It has always been very basic to always maintain a backup cop of your computer.
    Certainly you did not have our computer serviced without making sure your backup copy was up to date.
    In some countries you can redownload some content:
    Downloading past purchases from the App Store, iBookstore, and ...

  • Does the firewall apply also for the serial MGT?

    Hi!
    I would like to configue IPF. I��m using a v240 with an Hyperterminal cabled in the special SERIAL MGT port (RJ-45) of the server.
    My question is: does the firewall apply also for the serial MGT port?
    Because I��m not directly working on the server with keybord and monitor, I��m worried about not beeing abble to get to the server again in case that I make a mistake with the Firewall��s configuration!
    Is this SERIAL MGT port to be seen like a normal serial port or to be seen like a LAN port?
    Does the firewall��s configuration has to be loaded every time you boot (like in Linux)?
    Thanks for your help.
    XpucTo

    <table border="0" align="center" width="90%" cellpadding="3" cellspacing="1"><tr><td class="SmallText"><b>m-lennon wrote on Sat, 28 January 2006 06:46</b></td></tr><tr><td class="quote">
    These rules are normally initialized when the system is booted.
    </td></tr></table>
    Well I just found in the sun documentation the following explanations:
    "Solaris IP Filter uses the packet filtering rules that you put in to the ipf.conf file. If you locate the rules file for packet filtering in the /etc/ipf/ipf.conf file, this file is loaded when the system is booted. If you do not want the filtering rules to be loaded at boot time, put the in a file of your choice. You can then activate the rules with the ipf command."
    So I guess there would be the possibility to try the rules and to reboot in case the rules don��t allow any connection anymore.
    <table border="0" align="center" width="90%" cellpadding="3" cellspacing="1"><tr><td class="SmallText"><b>m-lennon wrote on Sat, 28 January 2006 06:46</b></td></tr><tr><td class="quote">
    On many commercial networks, network management interfaces are attached to a private network without a route to a public network, such as the Internet, this will completely eliminate the possibility of the system being compromised by an external host.
    </td></tr></table>
    But what does it mean for my concrete question?! Do I have to define a special rule for the serial MGT port? I would tend to think no because this port isn��t a network card and I would tend to think that It could be considere like a keyboard. But of course I��d like to be sure about it.
    XpucTo

  • Why does the application built executable run slower than my developement lib.

    The Response given was LabView 5.0.1.f1 specific. Iam however, using LabView 6.i. The Application runs approximatley 3 to 40 times slower than the developement library. Additionally the Write to spreadsheet data is corrupted when using the application executable. Is there a different solution for 6.i ????
    Tnx
    Len Kraus

    That does not sound right. I recommend rebuilding your VI. Beore you do, open the top level VI and press contol-shift-run arrow to perform a manual binary recompile. This makes LabVIEW recompile the whole code. Most times you will not see anything happen but occasionally an error will surface. Be sure to save the VI then rebuild it.
    You may also need to reinstall the LabVIEW run time engine and/or LabVIEW. I would start with the run time engine first.

  • What does the "Develop" do in the menu bar in Safari

    Just upgraded to Mountain Lion - trying to get to grips with the Develop tag in the Menu bar? only found it under preferences in Safari when trying to remove cashe - can anyone give me an idea where I can get more information on the use of the "Develop" ? cheers 

    In fairness Bee, your link includes this:
    The Develop menu allows you to show the Web Inspector, Error Console, Network Timeline and Snippet Editor or disable Caches, Images, Styles, JavaScript, Runaway JavaScript Timer and Site-specific Hacks.
    Now, how many of us know what any of that actually does? I certainly don't have a clue what the Snippet Editor or Runaway Javascript timer actually does. And 'Site specific hacks' is also something of a mystery.
    My conclusion is therefore that the Develop Menu options are for developers, not everyday users.
    And the article you link to was written for Leopard. Malcolm is running Mountain Lion.
    If malcolm needs further information on these options, we are going to have to do some serious research!

  • Does the ati x800 xt run silently?

    My current graphics card is quite loud (nvidia 7800 GT) and I am wondering how noisy the ati x800 xt is in comparison. I read another post that said he would only hear the x800 xt when the machine booted up but not after that. His comment is the last comment at this forum:
    http://discussions.apple.com/thread.jspa?threadID=273349&tstart=1125
    Could that really be true? I heard someone else say that all fan based cards are loud. I would just like to be able to find a descent performing card to run Adobe CS4 well without tons of noise going on. Is there something that does that? Whenever I use one of the new Mac Pros at the Apple store they seem to run really quietly yet they use cards with fans on them, I wonder how that can be? I mean they are virtually silent.
    Any help you can give would be greatly appreciated. It is really frustrating with the noise interring with my being able to think while working.
    Thanks

    The slot is AGP on a June 2004 Dual 2Ghz, sorry about that. I have been doing dozens of posts on another site and forgot to give my specs again when starting this post. I have had a huge confusing issue with this card. An ebay mac graphics card seller called this card an AGP card but then then someone pointed out that it was only for PCI-e. I went to the site and found that the was true.
    Another poster then showed me somewhere else on the nVidia site that claimed it could run both. Then someone was saying that they did make a card that did both AGP and PCI-e but was only made in europe. It's all very confusing if you want to read about what I have been going though you can go to this forum:
    http://discussions.apple.com/thread.jspa?threadID=1777222&start=15&tstart=0
    I saw some articles on the web earlier about using larger heat sinks and big fans. I asked about this in the forum but no could give me in sight on it or tell me if they would even work on the mac. How did your 9800 sound before and after the silencer? I really want to go back to the silence of my nVidia 5200 I loved how there used to be complete silence.
    The thing that bothers me even more than how loud it gets is how there is constant noise it never dies down like with the G5s fans. It is so annoying to be, say, watching a DVD and have the fan be running at full speed the entire time.
    I have a couple questions about the silencer.
    1. Will it let me keep the the card in my top PCI slot? The two PCI slots above the graphics card are empty and I can sacrifice those slots but I would like to keep the top card if I can.
    2. Is it hard to install ie require a lot of technical expertise?
    3. Would it be easy to make a mistake and mess something up?
    I realized that the 9600 is a slower card but having the machine quiet is a lot more important to me than having it super fast. I am also not doing super demanding stuff. I generally spend my day working in Creative Suite 4 Design Premium. So it's not like I am doing the latest games or 3D animation or high definition video or anything like that.

  • Build the best computer for running Photoshop, 64bit 32bit

    Hi people,
    the new Photoshop CS4 include new improvement who include support of Vista
    64bit and GPU acceleration trough OpenGL 2
    ok, so i want build a very fast computer how take advantage of new
    improvement dedicated to photoshop CS4.
    So the first question 32(XP or Vista) or 64bit ? have you any bench ?
    Vista 32bit support 4GB of maximum memory
    Vista 64bit support 16GB
    what i should do care also... ?
    thx people...

    >dpick,
    Do you want to share your performance preference settings and which version of PS you are running?
    Sorry I haven't replied sooner. I run CS3, and here's my performance settings:
    RAM--3255mb (100%)
    scratch--dedicated 40gb partition
    20 history states, 6 cache levels.
    As said, I rarely have issues. But I do get white fades once in a while, and when I load 16bit panoramics, the system really slows down quite a bit.
    I built this system with an eye towards running Vista x64. There are few motherboards supporting more than 8gb of ram. Most are server boards, and they have their own peculiarities. The few that will support more ram normally require 4gb sticks--good luck with those. However, 8gigs is still very, very sweet. With a quadcore running at 3.2ghz, I never worry at all how many apps I have open, and the only thing that will bring this system to its knees are those dang 16bit panos...

  • Does the developer edition of ASE include the security option?

    I'm trying to evaluate the use of Kerberos for authenticating users for Sybase ASE. I have downloaded a copy of ASE developer's edition and installed it into an Open Solaris VM. Im having difficulty activating the Kerberos module.
    Does the Deevelopers version include the Security and Directory Services option, and if not, is there a trial that I can use?
    Downloaded ASE from : ASE 15.7 Developer's Edition - Sybase Inc
    Security and Directory Services Option link: https://store.sap.com/sap/cpa/ui/resources/store/html/SolutionDetails.html?pid=0000012519&catID=&pcntry=US&sap-language=…
    Thank you for your time

    Chris,
    Do you have the -k entry in your RUN_ase file?
    $SYBASE/ASE-15_0/install/
    example:
    /redhead1/hansenr/ase/ASE-15_0/bin/dataserver \
    -sredhead \
    -kredhead@KRBLINUX \
    -d/redhead1/hansenr/ase/data/master.dat \
    -e/redhead1/hansenr/ase/ASE-15_0/install/redhead.log \
    -c/redhead1/hansenr/ase/ASE-15_0/redhead.cfg \
    -M/redhead1/hansenr/ase/ASE-15_0 \
    -k would be set to the keytab entry / service principal name generated from the KDC
    klist -k redhead.keytab
    Keytab name: WRFILE:redhead.keytab
    KVNO Principal
       2 redhead@KRBLINUX
    Do you have the environment variables set?
    KRB5_CONFIG=/redhead1/hansenr/krb/var/krb5kdc/krb5.conf
    KRB5_KTNAME=/redhead1/hansenr/ase/redhead.keytab
    setenv LD_LIBRARY_PATH /redhead1/hansenr/krb/lib:$LD_LIBRARY_PATH
    Sure you've done this but, source SYBASE.csh as well.
    For the libtcl.cfg file:
    Do you have libgssapi_krb5.so in that directory? This is the native for Solaris sparc I believe.
    You could also put the MIT build on that box to load the libraries.
    The "secbase=@REALM", i'm assuming this was to hide your realm, if not, this needs to show what realm your KDC is using.
    example:
    [SECURITY]
    csfkrb5=libsybskrb.so secbase=@KRBLINUX libgss=/redhead1/hansenr/krb/lib/libgssapi_krb5.so
    Does your interfaces file have the secmech entry number should be the same for you as well?
    example -
    redhead
            master tcp ether redhead 4747
            query tcp ether redhead 4747
            secmech 1.3.6.1.4.1.897.4.6.6
    Regards,
    Ryan

  • Will the iPhone 5 also run on 3g or will it only be 4g LTE?

    i don't want to get it if it can't also run on 3g because where i live i can't really get 4G LTE

    iPhone 5 order cancelled
    The maps are a show stopper for me
    Nick

  • How could the wireless ethernet card running automatic when system reboot?

    I have already setup the wireless networking card correctly which name is wpi0,but every time when I use it to link to internet,
    I had to key the instuction like this :
    ifconfig wpi0 plumb
    ifconfig wpi0 up
    ifconfig wpi0 dhcp
    and then input:
    wificonfig -i wpi0 connect mywifi
    comment: mywifi is the profile file of connection to my wireless router
    I had set it with the instruction before like thisi
    wificonfig createprofile mywifi essid=2WIRE678 encryption=wep wepkey1=1234567890
    anybody can help me group up the command line and has it running automatic when system reboot
    it seems the wireless card always need manual connect to router, that 's trouble.

    It should connect on it's own. Which version of Solaris are you using?
    If worse comes to worse just drop all of your commands into a simple script and then run that script as part of your .profile or equivalent.
    alan

  • Does the Nokia 5230 have an error logging system f...

    Hi there,
    I was wondering whether the Nokia 5230 has an error logging system for diagnostics especially for troubleshooting apps and the OS, your answers would be much appreciated.
    Many thanks,
    RocknRollTim 
    Solved!
    Go to Solution.

    @RocknRollTim
    Not in the manner of Maemo or MeeGo although not sure whether SmartInstaller for applications saves log upon this S60 5th Ed.device as in later devices, which is found in either c:\data\ovismartinstallerlog.txt or c:\ovismartinstallerlog.txt
    Happy to have helped forum with a Support Ratio = 42.5

  • What does the HD storage "other" run on your mac book pro?

    My mac book pro is approx 4 years old and has a 120 GB HD. It seems like the "other" section has increased dramatically (now 52 GB) in recent weeks and I am wondering if something is wrong. I have run disk utility and verify permissions and corrected any errors and this has not changed anything. I have 32 GB free space on the drive. Does that seem logical. I have also trashed a lot of pictures and documents and that hasn't changed anything significantly. Thanks for any guidance.

    So from reading other entries, Time machine is doing local back ups and will stop doing that at 90% of the hard drive capacity. Guess this is something new with Lion, thought I had something that was gobbling up my HD space.
    Here is what disk inventory X shows for my HD usage. Not sure why mail is taking up so much space. I delete all my crap and literally save no mail.

  • Why does the new version FireFox run slower than the old one?

    I have a fairly new computer but Firefox runs slower than the older version. Can this be remedied?

    That does not sound right. I recommend rebuilding your VI. Beore you do, open the top level VI and press contol-shift-run arrow to perform a manual binary recompile. This makes LabVIEW recompile the whole code. Most times you will not see anything happen but occasionally an error will surface. Be sure to save the VI then rebuild it.
    You may also need to reinstall the LabVIEW run time engine and/or LabVIEW. I would start with the run time engine first.

  • Over the next few weeks I will travelling in Mexico and driving in Mexico, how well does the ipad Mpa program run down there and does the device incur any additional charges ?

    Over the next few weeks we will be travelling in Mexico and hoefully using the iPad Maps for driving instructions etc. Does anyone have any experience with this feature? What can of challenges will we face?

    How to turn your computer into a Virtual (Personal)Router.
    Our hotel the Grand Oasis Cancun provided internet for only 36 hours and you could only use it on one device which comes to my next option as using your Laptop as a Personal Router to broadcast WiFi to any devices near your computer. Our room was on the Second level of the Pyramid at Grand Oasis and I was able to access it while at the VIP lounge below our room. Before our supposedly free internet service ended.
    I attempted using the hotel next door since I was getting a good signal from the Omni Hotel. They offered complimentary 24hr internet access using your browser as a way to track your use. Once you find the signal of the Omni it will open your browser I used Google Chrome, after it opens you go threw a few simple steps and your ready.
    I learned that after the 24 hours are up all you have to do is disconnect from their network, just run Ccleaner(free program) then find the Signal of the hotel and you will be given another 24 hours. What Ccleaner(<--download there) does is clears anything attached to your browser ie cookies temp files etc. it cleans your browser history giving you a way of not paying for the hotel fee of internet and giving you free WiFi. this is only if you are next to the Omni hotel :).
    What you need to download to turn your computer into a hotspot need to say is this little easy to use program Virtual Router. Once it has download test at your home to make sure it works with you devices. This will work with Tablets, Phones and other computers that cant find the Omni WiFi signal. Your welcome. To use it, is simple. Open program>make a password>select WiFi and start VR.

  • How much ram does the farm need when running virtual machines

    Hello Community
        When running Hyper-V you need more RAM to assign to each virtual machine.
        Approximately how much ram needs to be assigned to each virtual machine?
        Thank you
        Shabeaut

    Please refer the http://technet.microsoft.com/en-us/library/ff621099%28v=office.15%29.aspx
    Thanks, Ashish | Please mark a post helpful/answer if it is helpful or answer your query.

Maybe you are looking for