Does the digital voice editor for ICD-SX57 work with windows 8?

I have recorded a few files on the ICD-SX57. I have installed the DVE software version 3.0
When youplug in the ICD-SX57, you get an error message.
It says "the ICD-SX57 recorder is not accessible. The IC recorder or drive is not ready."
I cannot transfer the files from the ICD-SX57 to my computer. Any ideas? Thanks.

When following the procedure to drag and drop files from the Integrated Chip (IC) recorder to your computer, if the DVE software generates an error message or the software does not react to the transfer request, your software will need to be updated to the current version.
To resolve this issue, download and install any current DVE software updates from our Esupport website here.
If my post answers your question, please mark it as "Accept as Solution"
http://bit.ly/Win-4K

Similar Messages

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

What is the latest version of Firefox that will work with Windows ME?

We were recently given an older Gateway laptop that we intend to use solely as an internet terminal. Alas, it is running Windows ME and I don't even know if it has all the specs to upgrade (and certainly not to Vista, which is the only thing we have an install disk for). It currently has Firefox 2.0.0.20, which of course contains numerous security vulnerabilities and is incompatible with most newer plugins. What is the best version of Firefox that will work with Windows ME, and is it still available for download? Thanks!

Hmm... guess this will be just an e-mail terminal, hardly anything else works cuz I can't update Flash! Thanks for your help.

HT3986 Does equation editor in MS Word work with windows 7 on a imac

Just wondering if I buy an iMac and install Boot Camp whether or not all of the MS Office features will work?
For example, my wife needs to use equation editor in MS Word. It's sort of an add in in Word so I need to make sure all of those random features work before I go down this road.
Should I go to the store and ask for a demo or is this question a slam dunk?
Thanks in advance.

you are installing, running, Windows, natively, so it is the same.
a partition manager does not affect the OS, and the support driver software is just that
www.apple.com/support/bootcam faq manuals how-to & support

Does the Wireless feature of HP LaserJet P1102w works with the latest Mac OS Yosemite?

Hi everyone,
I have just updated the new OS for Mac as well as the firmware and software for my HP LaserJet Professional P1102w. I looked at the video instructing on how to set up the wireless network for the printer and my Laptop. However, upon reaching the step that requires HTML configuration, instead going to the actual page, the link took me to an error page stating that it could not find its host. So, I would like to ask if this is due to HP not yet updated all Printer drivers to the latest OS or would it be another cause? Thank you!
Best regards,
Jason Vu

Hi,
Welcome to the club. Please check:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04473034&tmp_task=prodinfoCategory&cc=us&dlc=en...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Does the new scrolling features on OS Lion work with the Macbook Black? I already am running OS Lion..

I already downloaded it and i can't seem to use the scrolling features except for the two finger scroll.

Which model do you have.
With MacBooks it's only the Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody that have the buttonless multi-touch glass trackpad.The Early and Mid 2009 model 5,2s had the 2 button trackpads
You need the MacBook with the trackpad that looks like this with no buttons

I downloaded the latest FF version for my new laptop with Windows 7 o/s and installed without problems, so why does it crash every time I try to use FF?

My new laptop came with IE installed. I downloaded FF and installed it without any problems. FF has crashed every time I have tried to use it. I have never had this problem before on either laptop or desktop and found that I could use FF most of the time, only switching to IE occasionally when a site worked better with it ... which wasn't often.

See:
* http://kb.mozillazine.org/Firefox_crashes
* [[Firefox crashes]]

Does the Boot Camp 2.1 Update For Vista 64 Work With Windows 7 Ultimate 64

??

It is. Win7 Ultimate64 is running on it right now, with the Boot Camp 64 drivers from the original boot camp drivers on the macbook CD.
It IS the Snow Leopard Boot Camp - is that 2.1 already ? I can't find a version number with it...

Does the (free) Borland C++ Compiler v5.5 Work With MX?

Has anyone successfully used Borland C++ Compiler v5.5 or Open Watcom C/C++ 1.2 as the compiler for MX? (As opposed the supported MS Visual C/C++ 6.0)
I'm using WinXP and MX 71.3.

As you are aware the Borland C++ Compiler is not supported. However, I did test the free Borland C++ v5.5 compiler with MATRIXx 71.3. It does not work out of the box. Since it is not supported I did not try to make fixes to force it to work.
Regards,
Joseph D.
National Instruments

Probook 450 G2 hotkeys for brightness not working with windows 8.1

Hi Please help solve this issue, since (fn+f8/f9) which by default are supposed to increase or decrease light are not doing so. on windows 8.1. i followed instruction on :- http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/ProBook-430-G2-Windows-8-1-brightness-controls-do-not-work/td-p/4692100 and http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04354128 (which gave me "(Error: system-websrv_unavail)") they were not of any help. please refer me to a working link if there exists any with the solution. thanks

Hello Issue could be cause by drivers. I suggest you to install HP SoftPaq Download Manager
This software detects what drivers are missing and auto update it.
For more information consult:
http://www8.hp.com/us/en/ads/clientmanagement/drivers-bios.html?jumpid=va_r11260_go_clientmanagement_ssml#system-sw-mng
To download:
ftp://ftp.hp.com/pub/caps-softpaq/HP_SDM_Setup.exe Regards

Digital Voice Editor 3.3

Hi, I help a woman who transcribes a pastor's sermon using the Digital Voice Editor software. We had to replace her older XP computer with a new computer running Win 7 Home Perimum 64 bit. I have installed the latest version of DVE, but I am having a problem with it not responding. When a button or tab or even selecting a voice file is selected, the wait cursor appears and remains for several seconds without any response. The application title bar acknowledges the lengthy wait with the "(not responding)" message there as well. I have looked at system resources and we are not taxing the cpu or memory, the drive is new with very little on it, so its response too is very fast. It appears as though the program is waiting on some event or message before proceeding from every request, but I have no idea what device, event or semaphore it might be waiting on a response to continue. Any help would be greatly appreciated.
I have not tried it in compatability mode since it states that it should work with win 7.
Thanks,
Mitch
Solved!
Go to Solution.

Thank you for your post and welcome to the forum.
We will need some additional information to assist with this issue, or you can contact our support line via the link below.
http://esupport.sony.com/US/perl/suppor ... dl=ICDMX20
1) What is the model number of the ICD unit
2) What is the listed version number of the firmware you are using
Sony® Digital Voice Editor Version 3.3.01

Digital voice software for Mac

Where can I download the software for Mac OSX 10.5.8 for Sony digital voice recorder ICD-SX750? Thanks.
Solved!
Go to Solution.

Thank you for your post and welcome to the forum.
The ICD-SX750 is compatible with Mac OS X (v10.2.8 onward) and you can drag and drop files and import them into iTunes if required, however the Digital Voice Editor software is Windows only.

Why does for-each not work with Enumeration?

I'm sure there's some reason for this but I don't know what it would be.
I am calling an existing method [http://java.sun.com/javase/6/docs/api/java/util/zip/ZipFile.html#entries()] And it returns Enumeration<? extends ZipEntry>
What I would like to do is
Enumeration<? extends ZipEntry> entries = myzipfile.entries();
for(ZipEntry ze : entries)but this won't compile because Enumeration is not an Iterator. Which kinda sucks.
Obviously (I think) Enumeration can't be retrofit to be an Iterator without problems and the APIs that return Enumeration can't change without problems so it seems the only way that for-each would work with an Enumeration is if for-each was allowed to work with Iterator and Enumeration.
So my question is, why isn't it? (To be clear I know how to enumerate an Enumeration, I'd just like to know if anybody has a clue why for-each was not designed to support Enumeration)

Still it does'nt fully answer the why question. Why does the Collections class not implement a static iterable(Enumeration) method that does not impose the overhead of an addiditional ArrayList, as in the following class:
import java.util.Collections;
import java.util.Enumeration;
import java.util.Iterator;
import java.util.zip.ZipEntry;
import java.util.zip.ZipFile;
public class EnumerationToIterable {
    public static <T> Iterable<T> iterable(final Enumeration<T> enumeration) {
     return new Iterable<T>() {
         @Override
         public Iterator<T> iterator() {
          return new Iterator<T>() {
              @Override
              public boolean hasNext() {
               return enumeration.hasMoreElements();
              @Override
              public T next() {
               return enumeration.nextElement();
              @Override
              public void remove() {
               throw new UnsupportedOperationException();
    public void iterateOne(ZipFile myzipfile) {
     Enumeration<? extends ZipEntry> entries = myzipfile.entries();
     for (ZipEntry ze : Collections.list(entries)) {
         // process ze
    public void iterateTwo(ZipFile myzipfile) {
     Enumeration<? extends ZipEntry> entries = myzipfile.entries();
     for (ZipEntry ze : iterable(entries)) {
         // process ze
}Could it be more simple?
(Thanks for the Dukes)
Piet

I use digital voice editor 3 on my pc..... want to convert to a program for the MAC. Any suggestions????

Hi!
Ohhhh how I hope someone out there can help me with this issue! I use Digital Voice Editor 3 on my pc and would prefer to use my MAC however don't know of any program similar/comparable to DVE 3.
Anyone know of anything out there I can use instead of what I'm using on the pc????
THANK YOU SO MUCH!!!!!

The best? A PowerMac (tower). Mainly due to the fact the the iMac isn't expandable. For example, all Macs have one bus for all their Firewire ports; adding a PCI Firewire card to a tower system is cheap and easy and creates a second Firewire bus that helps avoid dropped frame issues when capturing to or recording from an external Firewire drive from your DV device. Can't do that on an iMac though ... no PCI slots.
Also, having the capability of adding a second internal hard drive is something totally lacking in an iMac. If you're editing DV/DVCam/HDV, you'll get much better throughput with a second internal drive that an external drive. And with some kits available, you can have up to 5 SATA drives inside a G5 tower. The capacity for more RAM is a plus also ... I'd reccomend at least 2 gigs minimum ... but you can add more as needed.
-DH

Does the iOS app allow for digital signatures ?

does the iOS app allow for digital signatures ?

Hi,
Currently, Adobe Reader mobile products (for iOS, Android, Windows Phone) do not support digital signatures. But you can add handwritten signatures (as annotations) to PDF documents.
For digital signatures for legally binding documents and contracts, I'd recommend the desktop version of Adobe Reader or Acrobat Pro/Standard. Alternatively, you can use Adobe EchoSign for e-signatures.
About Certificate signatures | Digital signatures
Electronic Signature Software, Digital Signatures | Adobe EchoSign

Does the digital voice editor for ICD-SX57 work with windows 8?

Similar Messages

Maybe you are looking for