Does the E70 with S60 v3 support SDHC?

If you have upgraded your phone's firmware to v3, have you been able to use a miniSDHC card with your phone?
Thanks!

Here's THE Nokia link for compatibility with the 4GB microSDHC - the smallest of the microSDHC cards. As a general rule of the thumb, if your device supports 4GB, it's hardware is capable of taking upto the 16GB currently available.
http://mea.nokia.com/find-products-en/accessories/latest-accessories/memory-cards-and-cables/memory-...
If you got a Nokia device, there's nothing stopping you from going to dubdubdubdotnokiadotcom and having a look at what it will or wont do.
Symbian connected me to the world, to my dreams.. Thank-you Nokia

Similar Messages

  • Does the Sdxc slot for mac supports Sdhc cards?

    I only find Sdhc cards with 16 GB or 8 GB which is more or less the size I need/want.  The Sxdc cards are huge like 64 GB wich I don't need, and of course, they're much more expensive
    I know Sdxc and Sdhc cards are the same size, but that's not enought when It comes to hardware compatibleness.

    Yes it does....
    Only difference is the SDXC ( Secure Digital Extended Capacity)  32GB - 128GB and SDHC (Secure Digital High Capacity) 8GB to 32GB.
    Other than that, no issues.  They will work in your slot.  I'm using both.

  • If I connect my ipohone 5 to an iphone 4 dock with the apple adapte will it still stably on the adapter with no back support?

    If I connect my ipohone 5 to an iphone 4 dock with the apple adapte will it still stably on the adapter with no back support?

    I use an iPhone 4 dock but have super glued a piece of (elegant) plastic to support
    the iP5 .  It  will wave around in wind a bit without support putting strain on the
    .lightning socket
    I have also adapted an iPad dock which does have a lip at rear

  • What does the folder with a question mark mean?

    When I power on my black Macbook a white screen appears with a folder with a question mark flashing. what does the folder with a question mark mean? I just replaced the hard drive. When I put the install disc in the cd drive makes a very loud whirring noise then eventually the disc pops back out. Any ideas?

    You will need to reinstall:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • Does the HP OfficeJet Pro 8600 support e-print? I am running on Win 7 Pro 64 bit

    Can you please tell me: does the HP OfficeJet Pro 8600 support e-print?  I cannot seem to find or generate or figure out how to create an e-mail address for this printer.  Thank you.
    This question was solved.
    View Solution.

    Hello BoPeepLamb,
    The OfficeJet 8600 Printer does support ePrint. You can access the printers email address by enabling Web Services from the main display on the printer. The icon is located on the top left corner of the screen and looks like piece of paper with circles behind it. Before you can enable Web Services you must make sure you have a valid internet connection first.
    Once you have enabled Web Services, you should have a mobile printing sheet print with a printer code and link to http://www.eprintcenter.com where you can create an account and customize your printers email address.
    If you have any other questions feel free to reply to this post and I will try to find an answer for you.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • What does the cloud with downward arrow mean when trying to download a game from app store?

    what does the cloud with downward arrow mean when trying to download a game from app store?

    Hey there ArmidaKers,
    Welcome to Apple Support Communities.
    This article provides information about accessing your past purchases from iTunes in the Cloud, and it should answer your question about the download icon that you’re seeing when browsing the App Store on your iPad.
    Download past purchases - Apple Support
    So long,
    -Jason

  • Is there a way to get a search protocol of the "Find my iPhone" search app and icloud ? And where can i find a protocol of the chat with a apple support worker

    Is there a way to get a search protocol of the "Find my iPhone" search app and icloud ? And where can i find a protocol of the chat with a apple support worker

    Thanks for the reply however this does not help.  When I check the cloud it shows that I have only 20 photos.  In reality I had a lot more than that.  All the photos on the cloud are those that I have taken since I was at the Apple store.  When I check cloud storage usage on my phone it says that I have 5.1 GB of photos.  This is a lot more than the 20 that I can see.  I am not sure what the Apple employee did to my phone.
    Still looking for answers.  It is really too bad that I can not talk to an Apple person to get help since they messed up my phone.

  • When does iphone5s 1528 with iphone6,2 support china unicom's 4g lte network?

    When does iphone5s 1528 with iphone6,2 support china unicom's 4g lte network? Before I activate the cell phone, I could see the 4g at the left corner on the screen, but once I activated the cell phone, the 4g disappeared and 3g instead. It was a terrible experience. It seems that my phone support 4g but Apple and China Unicom disable the functionality.

    All the information you need is right here: http://www.apple.com/iphone/specs.html
    Notice there is no mention of WiMax.
    It doesn't really matter anyway as Sprint is rolling their WiMax network down for use by MVNOs. Actual Sprint customers will not have access to WiMax at all. It was a failed experiment.

  • Does the UCS C-Series Servers supports PCI/e card digium T1/E1

    Hello,
    Does the UCS C-Series Servers supports/compatible with PCI/e card digium  TE407P/TE420 T1/E1.?
    The server will be used as Asterisk server.
    Thanks
    Philip

    Hi Philip,
    Compatibility will depend on the server model that you have and whether the digium card is a full length, low profile, or half length pcie card.  Take a look at http://www.cisco.com/en/US/products/ps10493/prod_models_comparison.html#~tab-a for details.  If there are any issues with the card itself once it is installed it will have to go through the 3rd party manufacturer.

  • Does 2960-X with LAN Base supports static route?

    Does 2960-X with LAN Base supports static route?

    Does 2960-X with LAN Base supports static route?
    Yes.  You need to load the correct IOS, 12.2(55)SE (and later), and you need to change the SDM Template. 
    Read more HERE.

  • What does the symbol with a lock inside the refresh key in the upper right of my iphone4s and how do I unlock it?

    What does the symbol with a lock inside the refresh key in the upper right corner of my iphone4s mean and how do I unlock it?

    This is all covered in the manual:
    iPhone User Guide (For iOS 5.1 Software)

  • Does the iPod Classic 7th generation support movies in the HD format?

    Does the iPod Classic 7th generation support movies in the HD format as well as SD or just SD?

    No, the max resolution for video playback is generally 640x480, as stated in the specs
    http://www.apple.com/ipodclassic/specs.html
    The screen is actually half of that resolution, at 320x240.  HD at 720p is 1280x720.  HD at 1080p is 1920x1080

  • Doing the Initialization with selection?

    Hi Gurus,
    1. Please explain the difference between full Update and Delta Initialization with data transfer, and should Full update need to be
    used if the Delta initialization with data transfer is already done ?.
    2. For doing the initialization with selection in FI-AR loads do we need to take the back up of existing data in the cube ?
    And please explain with steps to be followed in case U have any document( COPA related and FI related) will request you to please forward me on
    <REMOVED_BY_MODERATOR> will be highly obliged.
    Thanks in Advance. Waiting for Warm replies.                    
    Thanks&Regards
    SAPSDN
    Please search the forum before posting a thread. Please read the rules of engagement
    Edited by: Pravender on Feb 12, 2012 1:57 PM

    Hi Fabio,
    helpfull answer, but the solution was, to set up into the Infocube the following:
    RSDCUBE -> Extras -> Structure-specific Properties -> 'Display'-field.

  • Does the web server of weblogic support any plugins

    Does the web server of weblogic support any plugins similar to the ISAPI plugins for IIS or apache plugins?

    i can't seem to get it to work either AND I can't seem to find an answer here or any search that I do.  It seems that you can only view your calendar and not delegate calendars via the web view

  • HT5137 what does the circle with a lock in it mean?

    What does the circle with a lock in it mean? And how do I make it go away?

    What circle with a lock? Can you be a littel more specific? It usually mean the rotation lock is on. Swipe up from the bottom of the screen to open Control Center and tap the icon there (looks the same - its on the top right).

Maybe you are looking for