Does the EP Sneak Preview support LDAP authentication?

When using the EP Sneak Preview is LDAP authentication supported or is only Portal Authentication supported?
Thanks in advance.

Hi Neil and welcome on SDN,
YES! you can configure EP Sneak Preview with LDAP. Check the documentation on help.sap.com for how to do this.
Hope this helps,
Robert

Similar Messages

  • Does the MacBook Air 2012 supports SDXC Cards?

    Does the MacBook Air 2012 supports SDXC Cards?
    Thx

    Hi! How are you? The reason why I'm here is to find out more about SDXC support/compatibility info on the macbook air 2012 and how to fix this nagging issue if it's fixable.
    I had just bought a Sandisk extreme pro 64GB rated at 95mb/s for my Nikon DSLR. Unfortunately, MBA struggles to detect or mount my card, after a few sweats, it would mount, but then very slow to process and preview the images as "Thumbnail preview". Then, after a few more sweats, you can scroll through the thumbnails smoothly.
    Streaming HD videos straight from the SD Slot is butcher chopping the beef. Video lags, stutters, chops, in otherwords, USELESS and a pain in the neck. So you just want to copy all the files to your macbook, and play from there. Copying files from SDXC to my macbook takes forever; writing is also another issue that take much more than forever!
    I have a top of the line macbook air 2012 (i7, 8GB, 512) and I always thought it's a versatile reliable computer but now I'm very disappointed. On the other hand, doing the same things on my macbook pro 2010 is seamless. I also tested on my windows 8 desktop to be flawless as well.
    Therefore, the memory card is not the problem. It's macbook air's sd slot that's a failure. I never thought spending $2,199 for a super computer would make me stress like this. In addition, the magsafe 2 is another failure in design. It always disconnects just by moving my macbook air from one spot of the table to another. Having it charged while on my lap gets on my nerves when it keeps getting disconnected! I hate Apple for doing this. If only there was a Windows notebook that surpasses Apple's design, I would never EVER buy Apple products EVER again.

  • Does the new airport extreme support backing up via time machine to an external hard drive pluged into the usb port

    Does the new airport extreme support backing up via time machine to an external hard drive pluged into the usb port

    Yes, but you might want to note that the port on the AirPort Extreme is only USB 2.0, and that it runs at about half the speed of the USB 2.0 port on a computer, so things are going to be quite SLOW as far as backups are concerned, or anything else for that matter.

  • Does the sender SOAP adapter support multiple operations per interface

    Hi guys,
    does the sender SOAP adapter support multiple operations per interface? (interface type of 7.1)?
    Thanks,
    Andrzej

    theoretically Yes.
    Do have a look into this when you get time
    /people/shabarish.vijayakumar/blog/2010/09/08/service-interface-and-multiple-operations--is-it-just-an-hype

  • Does the ipad mini 2 support USB OTG funtionality

    Does the ipad mini 2 support USB OTG funtionality ?

    if you don't mind me asking, what are you trying to use it for? so i can get a better understanding of what funtionalities you are trying to get out of this type of cord
    he is a link if you are wanting to buy it and just give it a try
    http://amzn.com/B00CR7U2X4

  • Does the Catalyst 2960x-48TD support Cisco's IGMP Snooping MIB?

    Does the Catalyst 2960x-48TD support Cisco's IGMP Snooping MIB?  We have a number of switches from different vendors and have recently begun switching to Cisco's, however unlike the other brands I am unable to audit the IGMP Snooping settings via SNMP.  It appears that while the switch supports IGMP Snooping it does not support the CISCO MIB for IGMP Snooping.  Is this a known bug and is it fixed in any of the later releases?
    Our company is purchasing and deploying C2960X-48TD's and I am tasked with updating our system audit software 

    Hi Sean,
    Nov 21 15:40:42.390: %MCAST-SPSTBY-6-ETRACK_STATS_LIMIT_EXCEEDED: Number of entries in IGMP snooping explicit-tracking statistics has exceeded the maximum limit (32000)
    The above log message is written because the number of explicit-tracking statistics entries is bounded to avoid monopolizing of system resources by IGMP/MLD snooping. The explicit-tracking statistics database maximum size is set to the same as that of explicit-tracking limit.
    The statistics are split into two banks: permanent and volatile. The statistics entries will be stored permanently (volatile) until the permanent entries threshold is reached, after which the statistics will be stored temporarily up to the database maximum size. When the size of the database exceeds the permanent threshold, a group will be removed on receiving an IGMP/MLD leave. Groups can be removed whether they were installed above or below the permanent threshold. If the number of statistics entries grows beyond the maximum size of the database, then no statistics will be stored for any newly formed groups.
    You can disable ip igmp snooping explicit-tracking by the following
    1) Configure "no ip igmp snooping explicit-tracking"
    2) Configure "ip igmp snooping limit track 0" on global.
    3) After ET is disabled, please do a "clear ip igmp snooping statistics".
    Here is a reference URL (please make sure you copy and paste the entire link to the browser):
    http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/snooigmp.html#wp1062242
    HTH
    Luke

  • I would like to convert a 100 pages PDF document to xls. Does the Adobe ExportPDF tool support this?

    Does the Adobe ExportPDF toll support the conversion of 100 pages?

    Your file should convert.  Please see our FAQ for more info about ExportPDF's limitations: http://forums.adobe.com/docs/DOC-1515

  • Does the new mac pro support the Apple cinema display

    Does the new mac pro support the Apple cinema display

    There is no 2007 23" Cinema Display
    There is a 2002 23" display that has the Apple ADC connector
    http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg
    There is also the 2004 23" display with a DVI connector.
    For the latter you just need a mini display port to DVI connector that plugs into the Thunderbolt port
    For the former you need that connector plu an DVI to ADC connector
    http://www.amazon.com/Apple-DVI-ADC-Display-Adapter/dp/B00011KHT2/ref=sr_sp-atf_ title_1_1/179-1314294-8358010?ie=UTF8&qid=1402766343&sr=8-1&keywords=dvi+to+adc+ display+adapter
    http://www.amazon.com/Dr-Bott-DVIator-US-110V/dp/B000NSGIQO/ref=sr_sp-btf_title_ 1_6/179-1314294-8358010?ie=UTF8&qid=1402766343&sr=8-6&keywords=dvi+to+adc+displa y+adapter
    http://www.amazon.com/Dvi-Adc-Conversion-Box-instock/dp/B0002CZJ7A/ref=sr_sp-atf _title_1_4/179-1314294-8358010?ie=UTF8&qid=1402766343&sr=8-4&keywords=dvi+to+adc +display+adapter

  • Problems in installing the content in the ABAP Sneak Preview

    Hello All,
    Have installed the ABAP Sneak preview and have activated the BW on client 001.  Was also trying to import the content into the BW system.
    In the SAINT transaction code, the content package is recognised, but when i try loading this, this fails in the stage CHECK_REQUIREMENTS. Since i have never done this before, was wondering if i am missing out the configuration steps before importing any components or the content.
    Are there some steps to configure the transport organiser etc before importing any component or SP or the content into the system ?
    Thanks for all the responses,
    Best Regards,
    Dabre

    If you run the install in foreground you will get a lot more information.  In my case it was erroring because the transport system hadn't been configured yet.  Heading into STMS cleared the error for me.
    -d

  • Does the Model Interface Toolkit support the new Linux based cRIO-9068?

    Hello, I have a cRIO-9068 and am needing to integrate a Simulink model into my controller. Does the Model Interface Toolkit support the new Linux based cRIO-9068? For that matter, does Veristand? This page implies that it does not:
    http://digital.ni.com/public.nsf/allkb/2AE33E926BF2CDF2862579880079D751
    Thanks,
    Solved!
    Go to Solution.

    Hi Southern_Cross,
    Based on the readme:
    http://digital.ni.com/public.nsf/allkb/D3F40C101B66128186257D020049D679
    It looks like it is now supported! These resources should provide some additional details:
    http://zone.ni.com/reference/en-XX/help/374160B-01/vsmithelp/mit_model_support/
    http://digital.ni.com/public.nsf/allkb/E552B0CD4E48215586257DF7005BE055
    Please note that NI VeriStand 2014 does not currently support he NI Linux Real-Time targets. 
    Regards,
    Joel I.
    Applications Engineer
    National Instruments

  • Does the HTC One M8 support 3G

    Does the HTC One M8 support 3G in areas where 4G is not available or do you just not get data services?

    Supported Data Technologies
    1xEVDO
    1xRTT
    EDGE
    HSPA
    XLTE Band 13 / 4 (700/1700 MHz)
    So, in other words, yes, you can get 3g service on the htc one m8

  • Does the Apple Iphone 6 support a prepaid nanosim for activation

    Does the Apple Iphone 6 support a prepaid nanosim for activation?

    Hi WHY!666,
    Yes, it does as long as your carrier is supported and you've 3G/LTE.
    With kind regards,
    David

  • Does the ethernet usb adapter support wake on lan?

    Does the ethernet usb adapter support wake on lan? But the Ethernet port of the Thunderbolt monitor?

    HINOHI5, welcome to the forum.
    Here is a guide that should help you find out if your computer will Wake On LAN.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Does the NI-DAQ DLL support multi user usage?

    I am currently developping several applications that will acces the card at the same time. Is it possible and does the DLL s have support for multi users.

    The answer is yes and no. If the different programs are accessing different functionality (ie, AI, AO, CTR), then yes. If they are both trying to access AI lines for example, even if they are different AI lines, then no. If you have a specific setup you are curious about, post here again.

  • Does the Firmware Password Application support commandline arguments

    Can anyone tell me does the firmware password application support commandline arguments. What are they ?
    Thanks...

    Hello! You might find THIS article on open firmware helpful. Tom

Maybe you are looking for