Does the file format differ when you Publish locally to hard drive vs. to the Connect Pro server?

I notice that when I publish locally to my hard drive to review a set of slides, I see a folder full of files. If I click on index.htm within the folder, I can launch the slides.
When I publish to the Adobe Connect Pro server, I merely see a url for the link to the course.
I'm not sure what this url link represents (as far as the file format is concerned):
Has the presentation been converted to different file format than what is published on my local drive? If so, what format is it in?
If the presentation has not been converted, does the directory structured published to my local drive get replicated on the Adobe Connect Pro server, and the url is merely a link to the "starting file " within that folder (say, index.htm)?

The published output does not differ between publishing locally and publishing to Connect. The URL on the Connect server does, ultimately, point to the Index.htm or viewer.swf file.

Similar Messages

What are the steps to follow after you install a new Hard Drive on a 17in Macbook Pro mid 2009

I plan on installing a larger Hard Drive..the physical part is simple..but what are the steps after you close it up and hit the power button? Is there softwre on the mother board that will start the unit running??

A new Hard drive will not be Mac-formatted, so you will have to do that first. A copy of Disk Utility to do the job is also on the 10.6 Installer/Utilities DVD.
Boot to the installer DVD, but do not Install. Answer only the "what language" question, and wait a quarter minute for the menuBar to be drawn. Choose Disk Utility from the Utilities menu that appears.
Select the Hardware_name of the new Drive. Partition, one partition, ( Options ), GUID partition table. Name the partition: MacIntosh HD and choose Format: Mac OS X Extended (journaled). It will complete in a minute or two, as it only rewrite the Directory area.
If you wish to shake out your drive, you can erase it and Security Erase, Zero all data, one pass. But this takes HOURS.

I have trimmed some R3D flies in Premier Pro and I want to export the trimmed versions in full res to my hard drive, i.e. I want to export the files so that they end up on my hard drive in the same native format. I don't see an option for this in Premier

I have trimmed some R3D flies in Premier Pro and I want to export the trimmed versions in full res to my hard drive, i.e. I want to export the files so that they end up on my hard drive in the same native format. I don’t see an option for this in Premier Pro when I go to export. Any help would be appreciated. Thanks!Premiere Pro

Aperture has the ability to work with files in their existing location. They are called "referenced masters." When you import images, you should select the "In their current location" in the "Store Files:" drop down box. Have a read of the documentation for full specifics. Unsure how you can resolve your duplication; might be some work but next time have a read of the manual first
Information for versions is stored in the Aperture database (library file). The masters can be inside the library file itself, or they can be somewhere else.

What are your options when you run out of hard drive space?

What are your options when you run out of hard drive space?

I 110% agree, it is a disaster but it saves your mac until you recieve an external HD.
Csound1 wrote:
XcodeDeveloper wrote:
I know but he just wanted options so I gave him one that helped me. If he filled up his HD a Gigabyte is sometimes a small miracle, exaggeration on small .
OSX with 1G of free space is a disaster waiting to happen.
Read this:

Changing Export Location when using Publish Services to Hard Drive?

Hi,
I am aware that typically when using publish services it is not possible to change the export location once it has been set. This has put me in a very precarious situation; let me explain.
I work for a distribution company that sells 15+ product lines. For almost every product, they have a photograph. I was asked to set up a system whereby a number of sales representatives could access these photographs in an organized fashion from their own computers. This is how I have set things up: A media computer (backed up onto an external hard drive) has all the raw files. In lightroom I have set up two publish services to hard drive. The export location for these two publish services was an external drive that was accessible throughout the company network. Unfortunately, while I was gone, the external drive was changed over to a cloud-based system. As such, the export location for my publish services no longer exists.
Of course, I could go and re-create the publish services, but unfortunately that would be an incredibly laborious process because each publish service has 10 or so sets with 2-4 levels of folders amounting to several hundred folders that would need to be re-created. Moreover, because of the complexity of the system, I made them all smart-folders with specified attributes, etc. So re-creating all these folders would take a whole lot of time and could literally drive a guy crazy (I would know, I set the thing up and it did almost drive me crazy!)
So, I was wondering if there is any lightroom wiz out there who knows a work-around for my issue.
Now, I did do some digging already and I came across this article: http://blog.27shutterclicks.com/2012/03/how-to-change-the-publish-service-export-location- in-lightroom-3-4/ which outlines a method for changing the export location! However, as far as I can tell, I would still have to change the export location of each folder manually, which would basically be just as complex and confusing as recreating the publish service anyways. Am I correct in this thinking, or using this method is there a "root" folder than I can change, which will change every other folder?
Hopefully I have outlined this clearly enough. I will really appreciate any response! Thanks and have a good day.
-M

MichaelKuby wrote:
I am aware that typically when using publish services it is not possible to change the export location once it has been set. This has put me in a very precarious situation; let me explain.
Yes, it is not possible to change the export location for a Publish service.
But it is possible to set up another Publish Service with a different location.
Under <Publish Services> right-click the header bar where it says "Hard Drive: .... " and select <Create Another Publish Service via Hard Drive>.
See screen shot:
In the editor that comes up select the "cloud" as location.

How do you transfer iTunes to Windows 8 when you use an external hard drive to store you music/media files

I've tried a number of different search terms and yet can't quite seem to find an exact answer to my question.
I currently use a Windows 7 computer and have my songs for iTunes on an external hard drive. I would like to find some step by step instructions on how to transfer my library to a new Windows 8 computer and still utilize the external hard drive to store my music. What I find very confusing is I have similar folders for iTunes on both my computer and the external hard drive (ex. Album Artwork, iTunes Library Extras, Previous iTunes Libraries). I'm not sure which files to move over to the new computer to make for a smooth transition.
Thanks in advance for your help.
Paul

See also Make a split library portable.
tt2

How to copy a playlist from iTunes to a USB (keeping artist song name etc) and the files to listen and browse in a jeep hard drive

I made a music playlist on my iTunes, perfectly ordered. I get a car with a USB input to get the songs in the car hard drive, My question is: How can I copy the playlist (with artist, song etc) with the music file (but with the name and artist instead of the file name) in the usb so I can copy it and browse it in my car?
Thanks

This would require renaming the files on the computer.
iTunes is not going to do this magically when copying files to the flash drive, iTunes does not even copy/sync files to a flash drive.

Can i move garage band files to an external hard drive? my mac air is low on HD space and i'd like to work on the files through garage band, but on an external hard drive. i know i can do this with eye movie. thanks.

hi each and all out there!
i've looked for answers through the help section of garage band and can't find any topics that fit my situation (so far that is :-)).
a friend recently held a memorial service for her husband and i both video taped and audio taped the service.
She would like some editing done on each (video and audio).
i have a mac air that is pretty much filled up and so i need to work on these files not on my computer, rather from an external drive.
through an iMovie discussion, i've been figuring out how to get video files onto an external drive so that i can work with them there through iMovie.
Now i'm wondering about Garage band and can i move the audio files onto an external drive and then work with them there, through Garage band.
and can i just move more of these files (not yet on my computer) directly to the external drive (like i do in iPhoto)?
Thanks so much ... any help would be greatly appreciated, chris.

Other than iMovie, GB always incorporates the audio files into the GB package. So just save or move the GB project to the external drive, and you're done - anything you import, edit or record will be saved to the external drive.

When I plug my external hard drive in, my internet connection cuts out

Hi, I have found this site very helpful since buying my first mac in 2011. This is my first post.
I have noticed a new problem today while using my firewire800 external hard drive. Each time I plug it in, as soon as its recognized, my internet connection stops working. I do not lose my connection with the router, only my ability to access actual web content. When I eject the hard drive, and then pull the firewire plug out, the internet will start working again. I use the hard drive as my time machine drive, as well as storing photos etc that I don't want on my actual computer taking up memory.
Thanks very much, any suggetions will be appreciated.

Is this a new drive or one that you've been using with you mac for a while?

When i try to download an epub book it says i can't use same adobe id on two diff computers. i installed a new hard drive,same computer, how do you fix

when i try to download an epub book it says i can't use the same adobe id on two diff computers. i installed a new hard drive, it is the same computer. how do i fix this

Hi donc58609443,
Can you attach the screenshot of application window so that i can assist you better?
Regards,
Rahul

Publishing to the Adobe Acrobat Connect Pro server - two questions:

I publish Captivate output to the Adobe Acrobat Connect Pro server. I have two questions:
How do I publish content so that users open up the output in full screen mode?
How do I publish content so that users open up the output in their flash players instead of their browsers?
As is well know, varying browser toolbar setups can make or break if your content fits on to the screen.
Thanks!

Hi there
I'm unsure if you are asking about this as it relates to Connect Pro server or not?
If you are asking if there is a way to open a Captivate presentation in Full Screen from Connect Pro, I do note that during Publishing, in the dialog the option for full screen mode is disabled. (which is odd because the first time I checked, the option was actually enabled!)
Again, speaking in terms of deploying the content via Connect Pro server, I am unaware of a way to coax Connect Pro into presenting as a SWF only. At least, not if you are publishing to it from Captivate. I did test by publishing a SWF from Captivate to a local folder on my hard drive. Then from inside Connect, electing to upload only the SWF. That seems to work. But again, you really don't have any control over the size of the window that opens. At least as far as I can tell. (I'm somewhat of a Connect novice)
Perhaps you might locate the forums for discussing Connect and ask the questions there?
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe

I try to export my Imovie and I always get the error code"Unable to prepare project for publishing...File already open with write permission" it even does it when I am just trying to export to my external hard drive to save the file

I try to export my Imovie and I always get the error code"Unable to prepare project for publishing...File already open with write permission" it even does it when I am just trying to export to my external hard drive to save the file

Thanks!!! I had same error (with -49) and the mac had an external hard drive attached.. and it was doing a backup. Stopped, disconnected and the project exported!

Error when trying to re-mount a VHDx (the version does not support this version of the file format)

Hi,
I have a vhdx on a NAS that I use for server backup. I created the VHDx via disk management, mounted it and assigned drive letter X. I now created a script that gets triggered upon startup via task scheduler to remount the VHD. If I try to mount it however,
it tells me this:
No matter what I try, I can't mount it. Double clicking just says this:
Eventviewer spits out error 137: The default transaction resource manager on volume X: encountered a non-retryable error and could not start. The data contains the error code.
How do I trouble shoot this? oO Originally I had created the VHD as expanding, where now I recreated it at it's full size of 900GB. Maybe that will make a difference.
Thanks for the help
Cheers
Maike

Hi Maike,
Do you mean that you can mount the VHDX via disk management but cannot mount it via a script? If so, please provide the diskpart’s mount commands in the script.
In the meantime, check if destination partition is NTFS formatted.
Problem with Attach VHD function: The version does not support this version of the file format
http://www.paulauskis.lt/2010/03/problem-with-attach-vhd-function.html
Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Hi Mandy,
I can not mount it after a reboot. So I create the VHDx via disc management and attach it afterwards without problem. After the server reboots and the attached VHDx dropps, I can't remount it. Gives me the errors I posted above.
As I had mentioned above, I recreated the VHDx at it's full size this time, rather than expanding. That worked just fine and I can remount after reboot.
So I consider this dealt with ;)
Thanks anyway!

I have completed a song on the GarageBand app which plays fine. I export it via email and it opens up in iTunes on my PC fine but when you play it there is no sound from the file. Anyone know I am doing wrong please?

I have completed a song on the GarageBand app which plays fine. I export it via email and it opens up in iTunes on my PC fine but when you play it there is no sound from the file. Anyone know I am doing wrong please?

you might need codecs on you pc. i find vlc player and codecs is perfect for music and videos.

Does the file format differ when you Publish locally to hard drive vs. to the Connect Pro server?

Similar Messages

Maybe you are looking for