Does the ID associated with the BRF+ objects changes when transported?

Hi Experts,
Does the ID associated with the BRF+ objects(such as Catalogs, Data Objects, Expressions, Funcition) changes when transported to other environment?
I just wonder if it is, because I am going to hardcode the ID of the Catalog I am calling using the FM WDY_EXECUTE_IN_PLACE.
Thanks,
Rob

The ID is stable! That is exactly the idea of the ID, stable and unique accross systems.

Similar Messages

Why does the PDFs' name change when i view them in the iBooks app?

i have some past papers and marking schemes in my iTunes library....when i sync them to my iPad, they appear just fine....they are there just the way i named them and all...
but when i open them, the name changes to some coded-ish name with lots of numbers and all that....
is it possible for me to change some setting and save the name i want for those PDFs? Or am I going to have to live with this madness?
please help!

Hello, I wanted to follow up on this issue after reviewing some of the changes with the current update. [https://bugzilla.mozilla.org/show_bug.cgi?id=1049521] This bug addressed some Windows HKEYs that are changed when Firefox is updated/or installed.
As an update, a patch has been made and changes are on the way for fresh installs of Firefox :-)

Why does the stage layout change when native menu added

I have a program that was fine till I added a native menu to it. After adding the menu I have a space on both the left and the right of the stage. If I draw a shape at x=0, y=0 it appears about 40 pixels to the right of the window border. If I remove the menu the space still occurs what is going on?

Adding the menu shrinks the effective size of the stage. This happens because in the app descriptor, you set the outer size of the window, not the stage size. When you add a menu, the space for the menu is created by removing space from the stage, not by increasing the height of the window.
You see the bars around the app because you have the stage scalemode set to something other than noScale.(noScale is NOT the default.) The other scale modes attempt to keep most or all of the app in view when the app is not the same size as the stage (which happens when you add a menu to a window). The space around the edge is the result of the runtime scaling your content into the available space When you remove the menu, this space should be returned to the stage -- and does in my tests, so I can't explain why you don't see the scaling go away. Perhaps you are drawing your content based on the reduced stage size so you still have extra space after the menu is removed.
The stage align property determines how the content is positioned on the stage when it is scaled down. The default is center which distributes space to either side when the stage is scaled horizontally, which is why the origin effectively moves away from the left side of the window. If you used the an AlignMode of top left, the origin would stay in the top left corner.
In general, I recommend setting the stage scaleMode to noScale in an application, unless you have a specific need for one of the other scale modes. Even then, you can still scale things programmtically using logic appropriate to the situation. The other modes were designed for use in a browser where the SWF author may not have control of the stage and so must choose the least-bad compromise. In an AIR app, you have control and so don't need to make that compromise.

Why does the file size change when put into an iDVD project? And problems with dual layer discs...

I exported a short video of mine from Final Cut Express and the size of the file came out to 7.3 GB. When I put it into an iDVD project, it says that the file is only 800 MB. I tried just burning it onto a dual layer disc anyway to see if it might still burn at the original file size, but the disc came out unusable for some reason, and obviously hadn't been burned anywhere near full-capacity. So, I tried it again, and the exact same thing happened.
I guess my first question is: why is iDVD changing the size of the file? I want the quality to be the best it can be, so keeping it at 7.3 GB as opposed to 800 MB is rather important.
Secondly, why did the dual layer discs come out unusable? I've burned single layer discs before and they haven't been an issue. Also, I know for a fact that the drive can burn dual layer discs, so that isn't the issue.
Thanks in advance to anyone who can provide me with help on this issue.

LivelyJamesS wrote:
I exported a short video of mine from Final Cut Express and the size of the file came out to 7.3 GB. When I put it into an iDVD project, it says that the file is only 800 MB.
Guessing here but it looks like you edited/exported an SD/DV sequence of about 30 min in FCE. DVD needs to be MPEG-2 so iDVD compresses the original file down to the size that you report.
LivelyJamesS wrote:
I guess my first question is: why is iDVD changing the size of the file? I want the quality to be the best it can be, so keeping it at 7.3 GB as opposed to 800 MB is rather important.
The quality will be what the MPEG-2 compression and the software allow for. MPEG-2 is DVD standard .... there's no way around that.
LivelyJamesS wrote:
Secondly, why did the dual layer discs come out unusable? I've burned single layer discs before and they haven't been an issue. Also, I know for a fact that the drive can burn dual layer discs, so that isn't the issue.
Guessing again but it would seem that you burned a Data DVD instead of a Video DVD which would be unusable by a set-top player. As I said above you can't get around DVD standards.
If by any chance your video was HD originally you can try to go the Blu-Ray route using Roxio Toast or FCS 3 (discontinued) or FCP X. You will also need a Blu-Ray burner.

Does the mobile design change when you change the desktop design?

Hello everyone,
Does anyone know if there's a way to set things up so changes to the text in the desktop design are reflected in the mobile designs? If I make changes to the text in the Desktop version of the site design, is there a way I can have those changes happen automatically (dynamically) in the Tablet and Mobile versions?
Thanks!
Chris, the Chief Executive Hippie
HippieBoy Design
www.hippieboydesign.com

Hi Chris,
There isn't a way to do this currently. This idea has been proposed before: http://forums.adobe.com/ideas/2485; please feel free to vote on it.
It would also help to know what fraction of text copy is identical across renditions (desktop/tablet/mobile).
Thanks,
Abhishek

HT5625 My daughter and I were both on same Apple ID. We are trying to change hers but when we do, it says her email is already associated with an Apple ID but when we try to get the password, it says that it could not be verified. How do we correct this?

My daughter and I were both on same Apple ID. We are trying to change hers but when we do, it says her email is already associated with an Apple ID but when we try to get the password, it says that it could not be verified. How do we correct this?

Not from your end. Click here and ask the iTunes Store staff for assistance.
(126716)

Why does the color red change from working with images in develop to library? The color gets lighter and nothing shows a change on histogram but visually you can see it.

Why does the color red change from working with images in develop to library? The color gets lighter and nothing shows a change on histogram but visually you can see it.

That's probably a broken display profile. The conversion from Library's Adobe RGB is different than the conversion from Develop's linear ProPhoto, so if there's a problem with the display profile it can show up this way.
Recalibrate, or if you don't have a calibrator use sRGB. If your monitor is a wide gamut model use Adobe RGB.
Assuming Windows, change it in Control Panel > Color Management > Devices, and relaunch Lightroom so that it can pick up the new profile at startup:

Does the URL object support https?

does the URL object support https?
i use to get an error message - that it did not recognize it.
sincerely
stephen

I would love to know the details in case someone out there knows.
I already have
jcert.jar
jnet.jar
jsse.jar
in this path C:\jdk1.3.1_01\jre\lib\ext
And as you can see, I am using jdk1.3.1

HT1918 Somehow the country associated with my account was changed to China. I did not make this change and now the system will not let me update either my credit card information or the country back to the United States. Help!!!

Somehow the country associated with my account was changed to China. I did not make this change. My credit card information needs to be updated but the system will not let me update either my credit card information or the country back to the United States. My updated credit card information is not accepted because the country is China. It will not allow me to change the country until the credit card information is changed. Help!!!

This exact thing has happened to me. Did you get it resolved? If so, how??

Does the NavigationController work only when placed in appDelegate?

I am trying to build application that has a tab bar controller with two view and the first view contains a segmented control.
Based on the decision of the segmented control, I load the tableview. The table view has an instance of navigation Controller in which I have assigned the tableview controller as a rootview controller. When I click on any row of the table view, a new controller gets pushed on the table view. In my case, the new view does not show up on the screen, once the row is clicked. I used NSlog and checked that the views pushed on the stack are correct.
I read many threads here and saw that all of them use tabBarController and then it directly uses the navigationController and viewcontroller. Is this the only config that works ?
What if I want to have a tabBarController->tableViewController->NavigationController, isn't it possible? Can anyone please help?

WitchKing wrote:
So, if I understand this fully, I can initialize the navigation controller as soon as the any row is clicked and put the tableView I am on as my rootView for the navController. and also push the next view controller I want to see, on its stack. and present the navigation controller's view.
The usual way to implement a table view drill-down would be to make the first table view (or the content view which includes it) the root view of the nav controller. I.e. the table view's controller would be the root controller. When you do it that way all the objects will do what they were designed to do, and the code to push and pop subsequent views will almost write itself.
However there's no reason you can't do what you described, which (if I understood) would be to attach the nav controller's view to the hierarchy only after a row in the table is selected. Note however, that you couldn't then expect the nav controller to make that first transition from the parent table view. You would have to provide your own transition to the nav controller's view.
You bring up a good point in any case. I never explicitly answered the question in the Subject line of this thread.
does the NavigationController work only when placed in appDelegate?
No, there is no requirement to create a nav controller in any particular position of the view hierarchy. Unlike a tab controller, a nav controller need not be the root of the hierarchy (i.e. added directly to the key window). In fact you'll find several examples in the docs which show one or more nav controllers under some other controller.
there might be some problem with adjusting bar heights and etc though.
I'm not sure you proposed anything that would make it difficult to configure a table view. One nav controller issue that will impact table view position and size is the attempt to hide the nav bar which would otherwise appear above the table. I walked, unsuspecting, into this problem when I tried to help with another, currently ongoing thread that might interest you: [http://discussions.apple.com/message.jspa?messageID=9606805#9606805].
While I'm pasting links, this one is also relevant to your post: [http://discussions.apple.com/message.jspa?messageID=9607946#9607946].
Thank you for the very kind words about my posts. For some reason, this past few weeks I've been spending most of my forum helper time writing about table views and nav controllers. I sure hope I've been dispensing correct information. It's not like I have any knowlege of the internals. These puppies are black boxes to me, so I'm just going by the same docs you have and my own (growing!) collection of test beds.
\- Ray

Why does the clone stamp work when I go from a darker colour to a lighter colour but not the other way around. How can I lighten up a dark area? Lasso tool takes from the wrong area too.

Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.

c.pfaffenbichler wrote:
Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
And what kept you from posting a screenshot?
I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos. You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image. I've uploaded it at the size it was supplied to me at (about 2700 pixels wide). So
Click to open the full image, right click and copy, and paste into Photoshop.
Select the clone tool, and set its blend mode to Darken.
Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
It works even better if you clone on a new layer also set to Darken. No masking, just Photoshop blend mode magic.
You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem.

How well does the Droid Charge do when dropped accidentally?

how well does the Droid Charge do when dropped accidentally? any screen or internal damages?
I'm probably going to have some kind of rubberized case.

Please consider getting an otterbox commuter case at least from amazon or otterbox.com
the defender series otterbox case with screen protector case isn't being shipped yet so i am using
the otterbox commuter case with verizon wireless store's 3pack of screen protectors - i do not like screen protectors but verizon sells the ones for the charge specifcally and it will
hold me over just fine until defender ships in august or september
either case helps to not accidentally press the power button easily while holding this droid Charge
there's my advce
ps these add bulk to phone i like the commuter case it is way sturdy polycarbonate or whatever STRONG black plastic with port covers except for hdmi that already has a cover built into phone
the defender series will be bulkier

HR (Planning database) Does the account type matter when suppressing rows?

Does the account type matter when using the Advanced Options row suppression?
The report will suppress all the 0 rows if the suppression is based on a column with a Planning acct type "Revenue", but it doesn't do anything if the suppression is based on a column with a Planning acct type "saved assumption."
Just wondering if this is why I can't get the report to suppress the rows. Everything else seems to be the same in the report.
Thanks in advance for any assistance on this.

user11232292 wrote:
Does the account type matter when using the Advanced Options row suppression? Yes. If you click on the Row > Advanced Options > Setup, you will notice the Account Type under the Suppress Row If drop-down.
Can you tell us how your Conditional Suppression is set up? If this report consists of account types Revenue and Saved Assumption only, and your conditional suppression works just on Revenue account types, you can insert a second condition for the Saved Assumption account types.
Let me know if this helps or if you have any other questions.
Cheers,
Mehmet

Why does the elements 13 change resolution when going into the editor -- it is huge and unusable

why does the elements 13 change resolution when going into the editor? -- it is huge and unusable

Many mysteries...
Which is your OS version ?
Your screen is 1920 by 1080 pixels.
The problem appeared after having worked normally.
When we select a picture from the organizer (album) and click on the edit button. The editor software changes the entire computer resolution from 1920 x 1080 to 640 x 480 (very unusable).
That's not clear for me: did you click on the 'Edit' button on the bottom right part of the organizer, or did you use the menu or the right click popup menu to open the editor? In the second case, you are in the editor workspace.
We tried right clicking on the Elements 13 icon, select properties and under compatibility we made sure that "run in 640 x 480 screen resolution" was de-selected, and it was. Cannot find any properties window for the editor?
The editor has its properties in the 'Edit/preferences' menu, but there is nothing about resolution there.
Just to be sure : when you are in the organizer with the left 'Folders' panel shown, you highlight one of those pictures to edit. Then you right click and choose to "go to folder". Do the images are shown as 'offline' ? If that is the case, the original are on an external drive which is not connected, and what you are seeing is a 'preview' copy on your computer with 640 x 480 resolution.

Why does the menu option change to "save as" after I select the print button?

why does the menu option change to "save as" after I select the print button?

>>The print command is selected in the File pull down menu, the print menu page pops up, I can then select my networked printer (which incidentally is confirmed to work with other software), the print command is in the bottom right hand corner and finally after depressing this print button a "save as" pop-up menu appears and then it only re-saves the file. Is this an issue with the pdf reader install?

Does the ID associated with the BRF+ objects changes when transported?

Similar Messages

Maybe you are looking for