Does the iPad stay turned off until I turn it on?
My first apple product is a 5th gen Nano.
One thing that's extremely annoying about it is that it turns itself on when:
1. I plug in the charging cord
2. I unplug the charging cord.
3. I plug in the headphone.
4. I unplug the headphone cord.
Each time, If I don't intend to use it immediately, I need to unlock the controls, hold pause until it shuts off, then lock it again.
Does the ipod share this behavior, or will the thing stay OFF until I actually want to use it?
If your iPad is just sleeping (in the locked mode), then doing any of the things you list will wake it up. However, if it's totally off (a state, by the way, that seems totally unnecessary with the iPad given the nature of it's robust battery that barely seems to loose anything asleep), then plugging in the charger will initiate a screen image, but will not reboot the thing, as far as I know. I'm not at home writing this so I can't check it out. But I think that's the behavior.
Again, the battery on the iPad is radically different than the one on your 5th gene Nano. With that, you did indeed need to be concerned about battery drain while asleep. With the iPad, you do not. You can make it go to sleep as quickly as you want (or down to two minutes) and once asleep the battery is virtually unaffected for long periods (the longest I've had mine sleeping was a three day weekend I left the thing home- don't ask. Got back and it was still at 100%). Not to worry about it waking up for a couple of minutes, either. Doesn't really affect battery life.
Similar Messages
-
My ipad is disabled and I cannot restore it because the Function Find My Ipad setting was on, and I cannot get in the ipad to turn off the setting in order to restore the ipad. Does anyone know how to solve the problem
Force iPad into Recovery Mode. Follow step 1 to 5 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times. -
Hello, for some strange reason I cannot open any of the apps I have. I have tried turning the ipad on and off and this doesn't work. I can open everything else (videos, camera, etc) just no apps. Can anyone help please?
If it's the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
If it's all apps including Apple's then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
sign in to itunes store will not disappear and the whole IPad will not let me go into other screens till this pop up goes away. I have entered the password several times and still will not disappear. Turned the IPad on and off but the pop up remain
FIrst try a soft reset by holding down the home & sleep/wake buttons until the Apple logo appears then let go & let the iPad boot up normally.
If that doesn't help then to make sure you have a strong internet connection.
Try resetting Network Settings
Settings->General->Reset->Reset Network Settings,
You won't lose any data but will have to log back into your wifi networks.
Once logged back in and when the pop-up appears, try entering your password again. -
After installing iOS7 I was prompted to make a passcode, I did so and stupidly forgot and now continually am disabling my iPad, ways in which I have read you can sort this is restoring your iPad, however I can not restore without iTunes telling me I need to go onto the iPad and turn off FindMyiPhone! How else can I sort this? It is logged into my apple account and everything! This is an iPad 2 also ASAP help!!
Hello shanefox,
This can be done by logging in at iCloud.com and removing your device via the Find My iPhone web interface.
iCloud: Remove your device from Find My iPhone
http://support.apple.com/kb/PH2702
Cheers,
Allen -
Hay. i change the screen LCD in IPAD 2 3G but i don't know what happen. She was working and every thing it's ok. One time i turn off the ipad and turn on more time, i don't see good in LCD the brightness is to low and i can see any thing!! and i want to know why is happen
Assuming you mean that you performed the repair yourself, it would seem that you either obtained a defective screen or you did some sort of damage when you replaced the screen. You can try asking for assistance on ifixit.com, a site dedicate to those attempting their own repairs, or you can take the iPad to a shop and pay them to try to correct the problem for you. Apple will no longer touch your iPad now that you've attempted your own repairs.
Regards. -
Does anyone have trouble with the iPad booting you off of the internet? I will be in the middle of something (i.e. Facebook), and it boots me out and I have to sign in again.
Jon....
Don't confuse the threads here with 'typical' experience. Most of the stuff here is from brand new users, and those that have problems, and considering the 30 million pads in use, represent a very small sliver.
If you are having repeated crashes it is really pretty basic. You either have a physical problem with your pad, or you are using too much memory.
The iOS system is supposed to monitor memory, and shut down previously used apps automatically to free up memory for what you are doing now. That part of ios is not perfect, and if an app introduces an unexpected memory load, sometimes it gets over whelmed.
This happens, more often than not, when using safari with multiple windows open on graphic intense sites. It can also happen with a memory intensive game, and residual apps in the background.
Double tap the home key and take a peek at the recently used list, and shut them down completely, and often the problem goes away.
If the problem persists, you may have a software issue, and a trip to the genius bar may be in order. -
Last known fix for Find my iPad? How is this not an included option for devices that are currently turned off. Absolute no brainer. Thief steals the iPad and turns it offline, or user loses it while it has low battery, lost forever. Brilliant.
If the iPad was running iOS 7, the thief/finder will not ever be able to use it.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
iCloud: Lost Mode - Lock and Trace
http://support.apple.com/kb/PH2700
iCloud: Remotely Erase your device
http://support.apple.com/kb/PH2701
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
General steps to follow for a Stolen iPad
http://stolen-ipad.com/
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st Len
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
Cheers, Tom -
After downloading an app, then later trying to open it again, the iPad screen turns green and nothing happens. How can I fix this?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iTunes and App Stores and sifnout and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Whenever I try to download an app, the IPAD stays WAITING
whenever I try to download an app, the IPAD stays WAITING
I turned off and restart the IPAD.....The IPAD said that it was imposible to buy these three apps and invited me to try latter...I try again only one, and it woked fine...thank you......
-
Why does the iPad 2 run out of memory
Why does the iPad 2 run out of memory?
First ...read deggie's response. Makes sense - even a computer running a large amount of RAM can run short on memory depending upon the operation you are performing so sometimes you have to do what is available to "clear" the memory.
You can ...close apps and restart the iPad on occasion. You close apps by double tapping the home button to bring up your recent apps in the multitasking tray. Tap and hold down on any of the icons until they all begin to wiggle. Then tap the minus signs in the corner of the apps to close them. Close all of your apps in that area. Also take note of how many apps are down there. That may have something to do with why the iPad is running out of memory. Tap the home button twice to return to the home screen. Then restart your iPad by holding down on the sleep button until the red slider appears and slide to shut off. To power up, hold the sleep button until the Apple logo appears and let go of the button.
If you do this once in a while, it may make a difference in how your iPad performs. In any event, it will not hurt anything. -
Why does the ipad 2 speaker stopped working after upgrading to ios 8
WWhy does the iPad 2 speaker stopped working after upgrading to ios 8 why plz respond
Hi A_S85,
It appears your iPhone has an issue relating to sound. The following article may help you find a solution:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
Follow these steps and test the sound after each one.
Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
Restart your device.
Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
Go to Settings > Bluetooth and turn off Bluetooth.
If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
If the device is in a case, make sure that the case doesn't block the speaker.
Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
Update your device to the latest version of iOS.
If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D -
Why does the iPad Mini not have music play count?
I bought an iPad Mini and also have a macbook. I had listened to various music on my iPad Mini the other day, however when I connected the iPad Mini to the Macbook and iTunes via the lightning connector to sync, it synced the ratings I gave the songs I listened to on the mini, but no play count, as if I had not listened to anything. I hope there is something I can do about this as I often look at my play count!!
Katrina UK
It should work work but these kind of bugs pop up between updates, both hardware and software. Try closing all apps in the recently used list on the iPad. Double tap the Home button, tap and hold one of the icons at the bottom till they wiggle then tap the to close them. Tap the Home button to get back to the Home screen then hold the sleep button till you see the slide to power off message. Once it has powered down completely hold the Sleep button till the Apple icon appears.
tomyiiii
Re: Why does the iPad Mini not have music play count?
Nov 18, 2012 11:34 AM (in response to Katrina UK)
Does it even really matter...?
Many people including myself rely on playcounts to control smart playlist to manage large libraries. Smart playlists can be created to show your most or least played tracks and used more or less as your favorites or other uses. Along with playcounts the date is transferred so to keep a fresh list of music on my smaller iPods a smart playlist set to songs not played in the last month keeps some fresh tunes on it.
Playcounts are also used to manage Podcasts in iTunes to delete older episode. Bookmarks, which can also be effected by this, can mess up audiobooks, movies and podcast playback between different devices. So yes, it does matter. -
I changed a few settings on my iPad and now cant get the iPad to shut off with the shutoff button and the button to get to all the icons won't let me get back to settings to change the settings back. Can anyone help?
Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost. -
HT1212 need to get the "iPad is disabled" off my iPad so I can use it
need to get the "iPad is disabled" off my iPad so I can use it
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom
Maybe you are looking for
-
Problema de Lock e travamento da instancia Java
Senhores, boa noite Estou vindo aqui como um ultimo recurso, estou com um problema em um cliente que me deixou com a pulga atrás da orelha. A cerca de 3 ou 4 meses fizemos o upgrade para o SP 14 do SLL-NFE ( sim, o sp antigo ), a uns 2 meses estamos
-
No matter which CD I play on my computer (using Windows Media Player), the title shows "Unknown Album", and each track is listed a s Track 1, 2, etc. instead of showing the song title. When I click on "Find album info", a message pops up saying "You
-
Hi, Please help with a solution: my requirement is to add the following to an existing program. i need to add 3 fields from a new table(a table which is not used in the program). the fields are : Vendor Part No. : Field ZWTYVND-Z_WTY_MAT_VPN Mail To
-
Western Digital external hard drive not working properly
I have this external hard drive from western digital, 2 TB space, in wich i stored data from a windows machine. Now i moved to an arch machine (the one i have at home) and it doesn't mount the hard drive. I tried as normal user and as root, i tried j
-
Difference between Logic Pro 9 and Logic Studio?
I have garage band and I notice that the instruments available are extremely limited, so I am looking to upgrade solely for the idea of getting more instruments and more features. Does the app store Logic Pro 9 have the extensive amount of official i