Does the iPhone 5C outer body melt or disfigure when kept in the sun?

I found that the bottom right corner of my 5C had somehow changed its shape and i have no idea how that happened. So please can someone tell me and will it be covered by guarantee?

iPhones do not melt in the sun, even the 5C. If you leave a phone in a car in the heat, it may turn itself off if it overheats. But the casing melting.....no.

Similar Messages

Why does my iphone come up with a different email when updating apps?

why does my iphone come up with a different email when updating apps?
Everytime I go to update my apps some other persons email or AppleID comes up and I have to cancel. its annoying enough to have to update all the time but now I have about100 update notifications (don't judge, you probably have a ton of apps too..haha) that are sitting idol, what's up how do I fix?
thx
Jackie
p.s. not updating to iOS6 yet

I'm sorry Allan, I should have clarified, your answer is improbable (well the first part atleast).
The apps I have had since the first week of purchase of my iphone back in 2011, I have not added any apps until 2 months before the last software update. This starting happening when the new software was implemented but I have not updated to iOS6 yet. Unless this person was able to hack into my account & transfer them to their account, I do not see how that is possible.
Prior to seeing this other AppleID, I have a popup to prompt me for my AppleID each time I download content. Each time I would see mine and enter my password.

WHy does my iPhone not show up in my iTunes when I plug it in?

WHy does my iPhone not show up in my iTunes when I plug it in?

It could be for any number of reasons. Since you do not identify the computer OS you use, here is information for both.
Windows: http://support.apple.com/kb/TS1538
OSX: http://support.apple.com/kb/TS1591

Why does my iPhone 4 always say "sync will resume when "... MacBook Pro" is available??? i can't seem to sync over wifi

why does my iPhone 4 always say "sync will resume when "... MacBook Pro" is available??? i can't seem to sync over wifi

Try the following:
1. Connect the phone to your computer using the USB cable and let it sync.
2. Uncheck "Sync with this iPhone over Wi-Fi"
3. Click Apply
4. Check "Sync with this iPhone over Wi-Fi"
5. Click Apply
6. Quit iTunes
7. Disconnect the phone from the USB cable
8. Make sure your phone is connected to your Wi-Fi network
9. Open iTunes
iTunes should see your iPhone and connect to it. Go under Settings > General > iTunes Wi-Fi Sync and see if you can initiate a sync.

What does the Sun App Server Use as a web container?

Does the Sun App Server use tomcat? Or is it some derivative of Tomcat?
thanks for the info.

Thanks.
Just to clarify for any others who are interested, heres the deal:
1) Package the static HTML files using the 'deploytool' (See Packaging Web Modules in Chapter 3 of The J2EE(TM) 1.4 Tutorial). This creates a .war file with the required deployment descriptors(?); anyway it creates a bunch of .xml files that have the right data in them.
2) Take the .war file and drop it in the 'quick deploy' icon (copies the .war file to the 'autodeploy' directory for the App Server instance).
Anyhow thats the drill.
Good luck.

Why does my iphone only send one picture multiple times when i select multiple photos to send?

why does my iphone send one picture multiple times when i select multiple photos to send (via message or email)?

Are you sending via Camera itself?
That is, selecting a picture, then select forward link symbol from bottom left
then select another picture,
Each time make sure you see the blue check mark at bottom right of each selected picture.
The number of " # Photos Selected" should be displayed at the top.
Then select Mail or Message and transmit.

Why does my iphone say i have a message but when i click on the app i dont have one and if i get out of the app it still says the messages are there.?

When i go on my phone it says i have 3 new messages but when i click on it i really dont. I turned off and turned my phone on 3 times and it still says i have 3 new messages how do i stop that. Without actually turning on the bager icon thing that pops up on the app.

Hey there Samimanis_.
It sounds like your notification for messages is showing that you have a few mesages but when you go into the app, there are no new messages. I would start by signing out of your Apple ID in Settings > Messages. Then close the running apps on the phone:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone, sign back in, and try again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Cheers,
Sterling

Why does my iPhone 4 die at random times even when the battery has plenty of life

after installing ios7 my phones keeps going dead while my phone still has power. I want to know how I could fix this. Is this a battery issue or a ios7 issue?

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
From Here
http://support.apple.com/kb/TS3281
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use...

Why does my iPhone 5c go to black apple screen when I unlock it?

When using my messaging, if my phone locks when I unlock it, it goes directly to the black apple screen that usually appears when turning my phone on. Then it will eventually go back to my messages. Does anyone know why it's doing this and how to fix it?

Hi MrsBarnett10,
If you are having an issue with your iPhone not unlocking normally while using Messages, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
iOS: Force an app to close
Next, I would try restarting the iPhone -
Turn your iOS device off and on (restart) and reset
If the issue is still present, you may want to restore the iPhone as a new device -
iOS: How to back up your data and set up your device as a new device
Thanks for using Apple Support Communities.
Best,
Brett L

Why does my iphone keep telling me 'Invitation not delivered' when sending a photostream invite?

When I try to add people to my Shared Photostream folder on my iphone5s, why does it say 'invitation not delivered' and the invite fails. The people I am inviting also have iPhones with iOS 7.1.1 and have iCloud and photostream settings turned on

Emily..
Try here > iTunes for Windows: Network Connectivity Tests

Why does my iPhone 4s start locking up or flashing when I'm typing a message?

I have an iPhone 4s with an updated iOS 7. Every since I did the iOS upgrade, my iPhone intermittently "locks up" when I'm typing a message, text or email - by locking up, I mean it won't display the letter I am trying to type or when I try to backspace or enter something different, the screen flashes and will not do anything. Anyone else having this problem?

Hi NancyC,
Thanks for using Apple Support Communities. This article has some steps you can try if your iPhone 4s periodically stops responding:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
- Ari

Why does Premiere pro locks out effect and media render when I have an active creative cloud account?

PP was operating correctly with full effects. Relaunched today with active cc acct confirmed and effects got locked out just like I have a trial version. Any suggestions. We relaunched PP several times with the same result.

If Premiere is acting weird restart computer. Hold down shift+alt while opening Premiere until welcome screen.
See if that will help.

Does the Sun Ray software support Windows 2008

Hey guys,
I need to implement Sun Ray software to connect to windows server 2008 running as a terminal server, but as i understand the current release does not support windows 2008 connection. Am I right?

You may use a third party tool called "VNC". This is a great tool to connect (any) ms windows system either it has server windows or client, but should have installed "VNC" on it.
Yom may download from
http://www.realvnc.com/products/download.html
You should install on solaris and windows systems on theri respective versions.
GOOD LUCK!

Why does my iPhone 5c not show any wifi/internet when on wifi screen?

When I go to "Settings" and then go to "Wifi" it trys to load the available wifi connections, but it doesn't load anything. I went on a 3-day camp and there was no wifi, so, I put on airplane mode for most of the camp to play my games and then when I go to my cousin's house no wifi shows up. After that, I came home and no wifi showed up again. Then I searched up on how to fix it and I did everything that was listed, turn cellular data on and LTE on, reset network settings, and restore my iPhone to last backup, and nothing happened it still doesn't show up. If you guys know any way to fix this, reply to this thread or discussion please.

No... FaceTime is permanently removed from devices sold in certain middle eastern countries. There is no way to install it regardless of where the device is being used.

Why does analog output max out at only 2 V when I connect my device?

I have a device that works on LabVIEW 6 (Win-NT machine), switching over to Vista, LabVIEW2009, with PCIe-6323. the voltage output signal control works fine on the NT machine over the full range of 0-10V. On the LabVIEW 2009/Vista machine, open AO channels work properly from -10 to 10 V in MAX. But when I connect the device - the same device that works just fine on LabVIEW6 - It only works up to ~2V. For example - I enter 1.5 V - i read 1.5 V. I anything from 2.2-10V, and I get 2.2 V. If I disconnect the device, I get output voltage that I enter in the Task test panel.
How can I get it to run the full -10 to 10 V?

The way that the scaling works for DAQmx tasks changed somewhere between DAQmx 7.? and DAQmx 8.8.
At least it did for analog inputs anyway.
Check if any scale is applied to your analog output task. Try changing it.
Troy
CLDEach snowflake in an avalanche pleads not guilty. - Stanislaw J. Lec
I haven't failed, I've found 10,000 ways that don't work - Thomas Edison
Beware of the man who won't be bothered with details. - William Feather
The greatest of faults is to be conscious of none. - Thomas Carlyle

Does the iPhone 5C outer body melt or disfigure when kept in the sun?

Similar Messages

Maybe you are looking for