Does the iPod Classic 7th generation support movies in the HD format?

Does the iPod Classic 7th generation support movies in the HD format as well as SD or just SD?

No, the max resolution for video playback is generally 640x480, as stated in the specs
http://www.apple.com/ipodclassic/specs.html
The screen is actually half of that resolution, at 320x240.  HD at 720p is 1280x720.  HD at 1080p is 1920x1080

Similar Messages

  • How do I get the ipod nano 7th generation to only show the album artwork? the volume control, info bar and album artwork shows whenever a song is playing.

    How do I get the ipod nano 7th generation to only show the album artwork? the volume control, info bar and album artwork shows whenever a song is playing.

    Hi TheGuru146,
    It sounds like the iPod isn't restoring correctly. Try putting the it into Disk Mode manually and then restoring the iPod again as described in the article linked below.
    Putting iPod into Disk Mode
    http://support.apple.com/kb/ht1363
    iPod nano (7th generation)
    Before placing the iPod into Disk Mode, verify that it has a charge.
    Reset the device by pressing the Sleep and Home buttons simultaneously until the display shows the Apple logo. This should take about eight seconds.
    When the Apple logo appears, press and hold the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
    -Jason

  • Can the ipod nano 7th generation support apps from itunes?

    is it possible to get games or some other apps from itunes, ON my ipod nano 7th generation? just got it and was wondering

    No.
    (74913)

  • IPod classic 7th Generation but I can not find Bluetooth ???

    I bought the ipod classic 7th generation 160 GB (latest model) but I can not find the bluetooth ... Doesn't have BLUETOOTH ? Anybody helps please....

    Nope.  No iPod Classic model has ever had bluetooth hardware built into it.
    B-rock

  • Does the ipod nano 7th gen support HD films?

    Can anyone advise if the ipod nano 7th gen support HD films?

    No, you can only watch SD versions of tv shows and movies.

  • Does the Ipod Touch 5th generation support AVRCP for bluetooth connectivity.

    Do the Ipod Touch 5th generation support AVRCP for bluetooth connectivity.
    I would like to know if it supports the volume control, call answering function and next/back song panel in a bluetooth headphone. (AVRCP bluetooth)
    Does it support headphones with microphone? (for Face Time, TinyChat or recording)
    Does it support this device on bluetooth with the Ipod Touch 5th Gen?
    http://www.jaybirdgear.com/sportsband-bluetooth-headphones/
    Thanks in advance

    Thanks for a speedy reply
    http://support.apple.com/kb/HT3647
    Though this wasn't updated (not having the Ipod Touch 5) but seeing the Ipod Touch 4 having both AVRCP and A2DP, Ipod Touch 5 should also have those...
    Thank you so much... Have a wonderful day

  • I can't see my playlists on the iPod nano (7th generation)

    I can’t see my playlists on the iPod nano (7th generation), but I can see and play them on the iTunes on my laptop. What do I do?

    Hi lone_dreamr,
    This is going to depend on how you are syncing music to your iPod nano. If you are automatically syncing, what option do you have selected in this menu? (Entire music library, or Selected content)
    You may want to uncheck the "Sync Music" box, apply the changes, then recheck the box, and apply the changes once more. This will instruct iTunes to completely remove all music from your iPod, and then copy the files once more. If you have a large amount of music, this initial sync may take a while.
    If the above does not resolve your issue, see the following articles:
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    Thanks,
    Matt M.

  • My ipod classic 7th Generation (120gb) is not showing in itunes or on my imac os x 10.4.11 Please help.

    my ipod classic 7th Generation (120gb) is not showing in itunes or on my imac os x 10.4.11 Please help.

    Hey there floss1st,
    It souns like your iPod classic is not appearing in iTunes on either of 2 computers. I recommend the troubleshooting from the article named:
    iPod classic Troubleshooting Assistant
    https://www.apple.com/support/ipod/five_rs/classic/
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • How do you turn off the voice on the Ipod Nano 7th generation

    How do you turn off the automated voice that tells you how to work the Ipod Nano 7th Generation?

    Try triple-clicking the home button and see if that turns VoiceOver off, and if it does you can then change what a triple-click does via Settings > General > Accessibility > Triple-Click Home.
    If that doesn't do it then there are instructions on this page : http://support.apple.com/kb/HT4064 - you can either do it either directly on the iPad or when connected to your computer's iTunes

  • Ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc.  I cannot swipe to the second

    ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc.  I cannot swipe to the second page of icons,  black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?

    I had this problem as well.  This is what I found by searching online.  I tried the fix on my nano 7th gen and it worked.  I hope this helps you.  Make sure to use two fingers for sliding and double-click the icons to get into settings.  Good luck.
    It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
    iPod nano (6th generation and later): How to use VoiceOver
    http://support.apple.com/kb/HT4317
    To turn off VoiceOver on iPod nano using VoiceOver gestures
    From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
    If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
    Slide one finger around the screen until you hear Settings. 
    Double-tap to open Settings. 
    Slide your finger up or down the screen until you see or hear General, then double- tap. 
    Slide your finger up or down the screen until you see or hear Accessibility, then double-tap. 
    Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap. 
    Double-tap when you hear "VoiceOver switch button on." 
    You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
    Note: You can also turn off VoiceOver by resetting your iPod.

  • HT1459 I've been trying to find a belt clip for the ipod nano 7th. generation player, any suggestions!!

    I've been trying to find a belt clip for the ipod nano 7th generation player, any suggestions?? thank you for your time. bill

    Just resolved the problem. If anyone else is having the same issue you can download the latest Epson software which works fine on Lion:
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=29081&prodoid=37368 464&infoType=Downloads&platform=Macintosh
    Sorry for bothering the community was in a rush.

  • Hi, Just wondering whether the iPod Classic 3rd generation is compatible with current iPod docks. Thanks

    Hi,
    Just wondering whether the iPod Classic 3rd generation is compatible with any of the current iPod docks.
    Thanks for the help.

    Hey anster101,
    Great question, and welcome to Apple Support Communities.
    The following article outlines the compatibility of the Apple Universal Dock:
    Learn about Apple Universal Dock
    http://support.apple.com/kb/HT1380
    Thanks,
    Matt M.

  • IPod Nano 7th Generation - Bad out of the box?

    I just purchased the iPod Nano 7th generation today and came home to sync it with iTunes.  iTunes recognizes the device for a second then I receive a "Disk was not ejected properly.  If possible, always eject a disk before unplugging it or turning it off." message.  I can see the iPod in iTunes for a second then it disappears.  As I keep it plugged in it will recognize, disappear, reapear then disappear again. 
    I purchased an iPod Touch 5th generation today and that is working just fine (as well as synching my other iDevices). Is this nano bad out of the box?

    Same thing happened to me. It did download the playlists I wanted, but the next time I plugged it in it acted as though it was being plugged in for the very first time, (regsitration and set up etc.)
    But the really bad news is the BATTERY LIFE. maybe get one hour of play time before it drains to zero.
    Anyone else have this issue?

  • How can I turn off the shuffle on the Ipod nano 7th generation?

    how can I turn off the shuffle on the Ipod nano 7th generation?  It seems to be set automatically to shuffle everytime I play anything and it's driving me crazy.  Any suggestions on how to turn it off for good?
    thanks!

    See the manual
    http://manuals.info.apple.com/en_US/ipod_nano_user_guide.pdf

  • TS1382 why does my ipod classic keep saying its charging and the back of it get hot

    why does my ipod classic keep saying its charging and the back of it gets hot

    The battery and/or charging circuit may be faulty. Reset the device and try again having let it cool down first.
    tt2

Maybe you are looking for

  • I'm deploying FF13 in my organization, how can i disable FF from disabling all plugins/extensions by default?

    Our organization requires web services with many plugins. In order to support the latest browsers, we must deploy FF13 company wide. Currently the installation disables all 3rd party plugins by default, requiring you to enable them manually. Therefor

  • DYNAMIC CREATION OF LINE SERIES USING ACTIONSCRIPT

    There's something wierd about flex or im doing something wrong? - when i create a line series manually using mxml and specify a id for the series, it works. - similarly when i try to dynamically create a line series using actionscript & define an "id

  • ABS Connection Shutter

    A few days ago when I started my phone it automatically went into power-saving mode despite being fully charged. Instead of my newtowrk provider details being shown top left there was a message something along the lines of "ABS free version upgrade t

  • Create several PDFs at once

    I have a report with data about several applications. Is it possible to create a button so that for all applications (i.e. for all rows) a PDF with detailed application data is generated? I know how to create a PDF for one application by using a colu

  • Set width of a decorative box

    I have a decorative box and inside that I am showing a text. Now the decorative box is stretched to the entire width of the Screen, but I want it to stretch only as much as the text its containing. I have set the "dimensionsForm" property to "childre