Does the Jheadstart application can deploy to Application 10g

Hi Jhs team:
Does the Jheadstart application can deploy to Application 10g ?

Ting Rung,
We did not test this yet, but assuming OC4J did not break backwards compatibility, it should work.
I would say, give it a try, and let us know if you run into problems.
Steven Davelaar,
JHeadstart Team.

Similar Messages

Two part question 1) what happens if you sign into messages beta on os x lion 10.7.5 after it expired? does the whole application not work or just imessage? 2) does installing messages beta on os x lion 10.7.5 delete ichat?

Two part question
1) what happens if you sign into messages beta on os x lion 10.7.5 after it expired? does the whole application not work or just imessage? can you stil use AIM, jabbar, google talk, or yahoo? if you open messages beta does it immediately tell you that messages beta expired?
2) does installing messages beta on os x lion 10.7.5 delete ichat or just transform ichat into messages beta giving the illusion that ichat is deleted?

Hi,
It was never completely clear whether it was just hidden or whether Apple ran a download page for iChat 6.
As the Download for Messages Beta was separate and "Deleted" iChat it would seem it would be another download for iChat 6.
iMessages will not function as it is only an Account type within Messages and iChat 6 does not have it.
Therefore messages on the iPhone will not sync to the Mac. (until you get Mountain Lion and Messages in that OS X version).
Mountain Lion and it's full version of Messages will not sync the iMessages that have happened in between the 14th December 2012 (end date of Messages beta) and the Install of Mountain Lion if you decide on that route.
8:51 PM Sunday; May 5, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How does the Passbook application work? How am I able to import my plane ticket, concert ticket etc into Passbook?

How does the Passbook application work? How am I able to import my plane ticket, concert ticket etc into Passbook?

Try the following to fix the iTunes Can't Connect issue that you are having:
Open Settings.
Open General.
Open Date & Time.
Switch the Set Automatically setting to Off.
Open Set Date & Time.
Set the date to a year ahead.
Go back to the Home screen and open Passbook.
Tap the App Store button. The App Store should load.
Go back to Date & Time and turn on Set Automatically.
Thanks to: https://discussions.apple.com/message/19622208#19622208

Command to execute the jheadstart application generator ?

Hi,
I would like to use Ant scripts to call a command to execute the jheadstart application generator. Just Wonder what is the command and parameters to do so.
Our project has multiple app defs, It may be useful to re-generate them all at some times.
Thanks,
Yongwen
Edited by: user2898674 on Jul 13, 2009 8:00 PM

Is it possible to run a java command to generate outside of Jdeveloper? There must be a java class to do the gen, I guess the question is if the gen relies on any of the jdeveloper design time objects.
It will be very helpful to integrate the generation in the build process. Our project is 100% jheadstart generatable (with a lot of customization templates) and includes about 10 application definition files.
Thanks,
Yongwen

Does the Imovie Application for Ipad 2 have the same trailers loaded that the Imovie for Mac has?

Does the Imovie Application for Ipad 2 have the same trailers loaded as the Imovie Application for Mac regular computers

They are 2 separate apps, there are no trailers for the IOS version.
http://www.apple.com/ipad/from-the-app-store/imovie.html

Does the ipod nano can record sounds?

Does the iPod nano can record sounds connecting "headphones with microphone"?

Hi uptight,
Yes, the iPod Nano does support MP4 files.
You can find more information about the files the iPod supports here: http://www.apple.com/ipodnano/specs.html
You can convert many videos right from iTunes. This article: http://support.apple.com/kb/HT1211 will walk you through the process with sample files.
-Jason

I'm going to europe for 6 months my question does the voltage change can burn my computer...? what do i need to buy to ensure my macbook is safe and sound?

i'm going to europe for 6 months my question does the voltage change can burn my computer...? what do i need to buy to ensure my macbook is safe and sound?

Read the small print on your power brick. It handles 110 - 240 volts automatically. All you need is a plug adapter to make your current wall plug fit the European wall sockets.

I'm using numbers for my students grades. the passing grade is 30 points. what i want to happen is that very students with a grade of less than 30 will have their points it red color. does the IF function can do this? how?

i'm using numbers for my students grades. the passing grade is 30 points. what i want to happen is that very students with a grade of less than 30 will have their points it red color. does the IF function can do this? how?

Hi efren
Conditional format will do this.
Select the Cells, then Menu > Format > Show Conditional Format Rules
Regards,
Ian.

Does the Aironet 3600 can be used in France (5ghz) ? What is the PSU voltage ? Hwic module equivalent exist ?

Hi,
Does the power supply from aironet 3600 series, AIR-CAP3602I-A-K9 is compliant with french voltage ?
Is it 110-220 input ? How to have a standart french plug or adapter if i bought this item in US ?
Does this hardware can be used in France regarding authorized wireless frequency 2.4 and 5 GHz (802.11a/b/g/n/ac) ?
Do you know if it exist any kind of HWIC module with same wireless performance that it can be used with G2 ISR Router (19xx/29xx/39xx) or previous generation ISR (18xx/2xx/38xx) ?
Best Regards.

Does the power supply from aironet 3600 series, AIR-CAP3602I-A-K9 is compliant with french
If you enable this AP, you are likely breaking French law. This AP is configured to be use with "-A" Regulatory Domain.
France should be using "-E".
Power supply issue ... 3600 will work with 15.4w PoE as long as you don't add modules. If you do, you need 20.0w PoE.
You have three choices: PoE switch, Power Injector 3 or Power Brick.
Edit: Just re-read your post about "802.11a/b/g/n/ac" so this confirms you need 20.0 PoE. So the same choices are still applicable: PoE+ switch, Power Injector 3 or Power Brick.

Does the data cable can charge an e61i ?

I've completly destroyed the hole of my e61i where you connect your charger and I dont wanna change of mobile now.
If I buy the data cable ,connect it to the computer and my mobile , does the mobile will charge ? ( and can i transfer data at the same time ? )
Thanks for the answer ( and sorry for my English '^)
J'ai completement explosé la connectique ronde (l'orifice (faut de pouvoir écrire T-R-O-U) où l'on branche le chargeur ) de mon e61i, je ne peux donc plus le charger ce qui est plutot embetant et je n'ai aps trop envie de changer de portable maintenant...
Est ce que le cable data me permettrait de le charger et d'échanger des données ?
Merci d'avance pour les réponses
Message Edited by Kiwiii on 03-Nov-2009 12:46 PM
Message Edited by Kiwiii on 03-Nov-2009 12:46 PM
Message Edited by Kiwiii on 03-Nov-2009 12:47 PM
Solved!
Go to Solution.

Unfortunately not. Your E61 can only be charged using the charging port.
You should be able to get the charging block replaced at your local Nokia Care Point.
You can find your nearest Nokia Care Point at:
For UK
http://www.nokia.co.uk/A4228006
For Europe:
http://europe.nokia.com/A4388379
For Asia-Pacific
http://www.nokia-asia.com/A4416070
Elsewhere:
http://www.nokia.com select your country, go to the support section, then select repair.

When does the Service Definition of deployed application become available?

Hello,
Could you tell me when Service Definition will be available at NWA - Web Service Administration?
What I did as follows:
1. create EJB 3.0 application using NWDS 7.1 SP05
2. create EAR project including EJB
3. select my implemented Bean, and select "Create Web service" from context menu
4. move the slider to the Develop service position
5. select "Create new interface" and enter the name
6. select all method to expose in the web service
7. select nothing at "Web Service Publication"
8. select my implemented Bean, and select "Create Publication Information" from context menu
9. select as follows
     ExtendedByIndustory: Automotive
     LifecycleStatus: released
     RelevantForIndustry: Automotive
   and save
10. select EAR project, and select "Run on Server" from context menu
As a result, I can find my application as web service in "Web Service Navigator". It works fine.
But, I cannot find the Service Definition for my deployed application in "Web Services Administration". (NWA > SOA Management > Business Administration > Web Services Administration)
I thought Service Definition would be available when I deployed application... but I was wrong.
Do I need to do something to show the Service Definition of my deployed application?
My final goal is publishing my web service to Service Registory on CE server.
Any comments would be appreciated.
Best regards,
Ikue Saiga
Edited by: Ikue Saiga on Mar 24, 2008 6:10 AM
(changed subject)

Hi Srinivasan,
Thank you for your reply and I am sorry for lack of infomation.
I'd like to know how to publish my web service from NWDS - I mean, I don't want to register my web service into Service Registry manually.
I'm not sure whether it is possible...
Any comments would be appreciated.
Best regards,
Ikue Saiga

Where does the iWeb application save project files when using File-- Save ?

I have mastered publishing my site pages to my webhost by saving to a folder and uploading via FTP, but I am wondering when I use the File Save (assuming I am saving an Iweb project file), where is that file stored by default?
mac mini Mac OS X (10.4.4)

Users / Your User / Library / Application Support /
Iweb
Inside there there is a document called Domain that
has all your information.
Thanks! big help!
mac mini Mac OS X (10.4.3)

How does the Develop Applications on windows working with Oracle on Linux

Hi list
I'd built a machine.
OS: RedHat 9.0
Database: Oracle 9iR2
Every service works fine for me (dbstart|dbshut|dbca|oemapp xxx)
But Now my girl friend needs to use Windows
XP, so I can't use this machine with a monitor.
And I would like to use TOAD or DBQwikedit to connect the
Oracle Database Server. But they always failed by the error messages such as `DLL_UNAVAILABLE'. I was not familiar with Windows XP or 2000.
Thanks in advanced!
--Armani Liao

Hi Armani,
maybe u need to re-install the program.
btw how did you solve the linking error of ins_oemagent.mk on the installation of the oracle 9i R2 on RH 9?
-andi

Why does the Firefox application stay open in the background when I close it?

I have a WN XP PRO desktop and a WN 7 Pro laptop. Every grade of Firefox has the same problen of staying open in the background at times. I have always had to restart my computers to clear it. Why can't this problem be fixed? I see that others are having the same problem. The only time that I know that it hasn't shut down is when I try opening it up. It may be running when I am using IE or Google. It has to be slowing my computers down.

There's no way a 16GB model phone has more than than capacity. I have no idea what you mean by AutoRun icon. Is that an app you downloaded? Did you jailbreak?
The "advertised" capacity of all storage devices is based on a decimal definition of "Gigabytes" where 1 GB is defined as 1,000,000,000 bytes. However computers see and calculate storage based on binary definitions where 1 GB = 1,073 742,824 bytes. Thus a 16 GB "decimal" device is only 14.9 real, binary gigabytes.
Also, there are additional loses due to formatting overhead and the iOS. RAM memory is separate and not used from the supplied flash disk.

When use scan mode and FPGA simultaneously, why does the FIFO Read can not be used?

Hello, I am using compactRIO-9025 to do a project and trying to use scan mode and FPGA simultaneously ( Hybrid mode). I have already build a project as the following tutorial.
http://digital.ni.com/public.nsf/allkb/0DB7FEF37C26AF85862575C400531690 and I have NI 9205, NI 9023 in Scan mode and NI 9871 in FPGA mode in the same project.
In the FPGA Target of the project, I add a FIFO and tried to use it to log in data from NI 9871. I wired the module I/O node to FIFO Write in the target vi. However, when I droped the invoke method to the block diagram of the host vi and right clicked it, there is no FIFO Read can be choose. Could you please help me to solve this problem?
Thank you very much!!

I am not aware that using the Scan Engine is blocking any access to a transfer FIFO. But please reread this from your quoted KB:
Secondly, the number of DMA FIFO's that can be used in the FPGA code will be reduced, since the scan engine uses two DMA FIFO's. Most FPGAs have 3 DMA FIFO's, so there will only be one DMA channel left to use in the FPGA code.
This means, you have only a single DMA FIFO left which is either Target to Host or Host to Target.
Make sure that you configured the FIFO to be the correct direction for your needs...
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Does the Jheadstart application can deploy to Application 10g

Similar Messages

Maybe you are looking for