Does the K7N2 Delta-L have LBA 48 addressing?

I want to add a 250GB HD but the FAQ for the K7N2 Delta says that it can only support up to 160GB drives. It should be able to support drives higher than 160GB if it has LBA 48 addressing, right? I don't if it does. Or maybe the FAQ is just out of date as it could have been made before 200+ drives existed? All I'd like to know is if I install a 250GB drive on this mobo it will not be detected as a 160GB. And yes, I have XP SP2. Thanks.

hello welcome to forum.
yes your mobo support LBA with 48bit addressing.
if you add 250GB HDD will detected correctly at his full capacity.

Similar Messages

  • HT4864 How come when I use the automate iCloud setup, does the incoming mail server have a different address then specified by these instructions?

    The IMAP sever that automatically set up is p08-imap.mail.me.com?

    So I guess using Apple Token for authenication is OK, instead of the prescibed Name and Password per the http://support.apple.com/kb/HT4864?

  • Can I have an oppinion on the K7N2 Delta-ILSR

    I'm looking for my next board and after reading this article dated:August 2003,in Maximum PC mag, I wanted to know more. I have always been a Pentium guy so I don't know anyting about AMD and it's compatibilities...what is a fast processer for this board..?
    How would it compare to the Pentium in Gigahertz?
    Is this mother board even worth the trouble..?
    So many questions, so little time.  

    I have and love hate my MSI K7N2 Delta when its working its a great board but it can tax you at times.
    I've learned a lot in building this one.  I have been building computers for years started with the K6 III 450 and a FIC motherboard.
    I never had any problems with any of them just put togather load and use.
    The only other time I had any real problems with any of my computers was when ME came out I jumped right away what a mistake that was it was mouths before all the drivers where fixed and even than some never got fixed and had to quit using some of my hardware like a sound Card etc.
    The Nvidia chipset that is the heart of the K7N2 Delta is very picky about what ram you use even some that look like there working can give you headaces.
    Also they take very good power supplies the cheap 300 to 400 wat power supplies just won't hack it. Get a good one. Antec, Enermax etc.

  • Can't install OEM version of WinXP on the K7N2 Delta!??!?

    I posted on amdmb.com's forums about how I cannot get WinXP to install on my hard drive connected to the k7n2 delta. Wonkanoby, a senior moderator on one of the boards here, and a visiotor on those boards at amdmb.com, stated that OEM versions won't work on this mainboard and you have to have a retail box windows version. Is this true? if so, this is complete crap! If MSI thinks I'm going to spend $150 bucks on a retail boxed version of Xp when I have a perfectly fine working copy right here, they are N U T S!!! This has got to be the most outrageous thing I've ever heard concerning mainboard issues. I hope MSI realizes they will either be working on a bios fix or they're paying me the restocking fee to send this board back to Newegg.

    http://www.duxcw.com/faq/win/xp/oeminst.htm
    How to Install the OEM Version Windows XP Professional
    Last updated: 6/18/02
    Q.  How Do You Install the Windows XP Pro OEM Version?
    A.  I install it on a new computer (or hard disk drive taken down to "bare metal") from the DOS prompt with a Windows 98 Startup floppy (http://duxcw.com/digest/Fromshop/software/windows/startup/startup.htm). Put a copy of smartdrv.exe on the Startup floppy. You should be able to find a copy on and existing Windows 9x/Me computer at C:windows. It is on the CD’s in D:win98.  Boot to the floppy and use fdisk to partition the drive (the process the same as that at http://duxcw.com/digest/Howto/software/windows/upgrade/fdisk.htm. Format the C: drive. Do not install the system files. If you have more than one partition, they can be formatted during the Windows XP installation or with Windows XP after it is installed. Also, use fdisk to manually make C: active if there is more one partition. Load smartdrv.exe…
    A:>smartdrv.exe
    …and run D:i386winnt.exe, where D: is your CD-ROKM drive.
    Do not delete or reformat C: with this method.  Winnt.exe copies the install files to that partition. You can convert it to NTFS and that process is fast.  It should also work if the i386 directory is copied to a scratch hard disk and the hard disk is connected to the secondary IDE interface.
    OEM = Original Equipment Manufacturer = a company that makes/markets computers (and parts), etc. which include parts made by other companies, and not the “original” manufacturer as OEM implies, just masquerading as one.  Licenses of OEM versions of Windows, etc. software are sold to computer manufactures for installation on new computers.  They are full versions of Windows, not upgrades.  They are widely available on the "grey market" and Internet and cost considerably less than retail full versions.  Just be careful not to purchase a pirated copy.

  • Can the K7N2 Delta-L run CAS2

    I have my memory set to CAS2-3-3-11 in the bios of my K7N2 Delta-L, but CPU-Z reports  it as being CAS2.5-3-3-11. Can the K7N2 Delta-L run CAS2?
    Thanks gents.

    Can now run CAS2 with the 5.6 bios. Thanks liquidsoul  

  • Why does the iPad Mini not have music play count?

    I bought an iPad Mini and also have a macbook. I had listened to various music on my iPad Mini the other day, however when I connected the iPad Mini to the Macbook and iTunes via the lightning connector to sync, it synced the ratings I gave the songs I listened to on the mini, but no play count, as if I had not listened to anything. I hope there is something I can do about this as I often look at my play count!!

    Katrina UK
    It should work work but these kind of bugs pop up between updates, both hardware and software. Try closing all apps in the recently used list on the iPad. Double tap the Home button, tap and hold one of the icons at the bottom till they wiggle then tap the to close them. Tap the Home button to get back to the Home screen then hold the sleep button till you see the slide to power off message. Once it has powered down completely hold the Sleep button till the Apple icon appears.
    tomyiiii
    Re: Why does the iPad Mini not have music play count? 
    Nov 18, 2012 11:34 AM (in response to Katrina UK)
    Does it even really matter...?
    Many people including myself rely on playcounts to control smart playlist to manage large libraries. Smart playlists can be created to show your most or least played tracks and used more or less as your favorites or other uses. Along with playcounts the date is transferred so to keep a fresh list of music on my smaller iPods a smart playlist set to songs not played in the last month keeps some fresh tunes on it.
    Playcounts are also used to manage Podcasts in iTunes to delete older episode. Bookmarks, which can also be effected by this, can mess up audiobooks, movies and podcast playback between different devices. So yes, it does matter.

  • "Server either does not have a virtual switch configured or none of the configured virtual switches have an IP address assigned" error driving me nuts!

    OK; have been trying to setup a test VM based RDS deployment for a few days now with no luck.
    this error mentioned above:
    "Server <server name> either does not have a virtual switch configured or none of the configured virtual switches have an IP address assigned" error is driving me nuts!
    I have removed and re-added the RD Virtualization Host role numerous times, each time having the "create a virtual switch" checkbox selected, but it did NOT create any virtual switch.
    I created the external virtual switch manually and tried to create the desktop collection again, no luck with the same error.
    a few questions:
    1. you don't assign IP to a switch! you assign IP to Network Interfaces. why does the error puts it like this?! it is technically wrong.(yeah yeah I know all about how you'd assign IP to managed switches in real world to telnet into them and manage them.
    you know better than me that it is not the case here!)
    2.the RDS Virtualization hosts are using their wifi card as the card for the virtual switch. could that be the reason? I even disabled their unplugged wired NIC just to make sure that the wifi is the only available option for the RDS wizard to use for the
    virtual switch creation; but it didn't use it and it didn't create any virtual switch automatically.
    3.if WIFI nic is indeed the reason, is it your suspension or an official documents is there somewhere stating so (that the WIFI NICS on a Virtualization hosts are not supported as the hub for a virtual switch).
    4.what are the properties of the virtual switch the RDS requires? does it have to be external? why can't it work even with my manually created external switch?
    5.how would I fix it?
    P.S: the environment is made up of 2 laptops, having windows 2012 R2 trial installed on them, using their wifi to connect to the out world. no cable is plugged into their wired NIC card.

    Hi,
    Thank you for posting in Windows Server Forum.
    The simplest short term solution was to connect each computer to a small switch that had no other connectivity. This brought up the link light on the external NIC and allowed the creation of the collection to complete. You need to use an external switch. You
    can create one external switch which might fix the problem.
    Please check below article for information.
    VDI Deployment Error About Virtual Switch
    In addition please referthis article for information regarding virtual switch.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • Does the new mac mini have Hdmi 1.4?

    I'm thinking about buying a Mac mini in combination with a 3D monitor but every where on the Internet they are talking about HDMI 1.4a or something like that... Is it necessary? And does the Mac mini (2012) have it?

    Not certain, but it says here that 1.4 does not support 3-D, that 1.4a is needed...
    http://forum.xbmc.org/showthread.php?tid=126642

  • Does the hp touchsmart 320m have a vga port for a second monitor?

    does the hp touchsmart 320m have a vga port for a second monitor?

    raybassett wrote: does the hp touchsmart 320m have a vga port for a second monitor?
    Hello raybassett, Here  is the link for the specifications for your system. It does not appear it has any external display connectors at all.
    Please click the White Kudos star on the left, to say thanks.
    Please mark Accept As Solution if it solves your problem.

  • Does the Macbook pro retina have the ability to use external speakers

    Does the Macbook pro retina have the ability to use external speakers

    The speakers will have to be externally powered and have internal amplifiers.  Is that the case?
    Ciao.

  • Does the Macbook Pro (2012) have a dvd drive? I can't seem to find one.

    Does the Macbook Pro (2012) have a dvd drive? I can't seem to find one.

    Not the MBP-R's, you can't even change the RAM or storage in them.
    The other 15" MBP's you can and they include the Superdrive built in.
    Last time you do a impulsive purchase huh?

  • Does the hp touchsmart 610 have a vga port?

    Does the HP Touchsmart 610 have a VGA Port to connect to a tv?

    Also is there a cable or something to use for the Ports on this computer to connect my computer to my Flat Screen? Thanks for the help!!

  • Does the Technical Communication Suite have an installation application similar to the Creative Cloud Suite? If so, how do I get it? If not, how do I upgrade from version 4? Thank you

    Does the Technical Communication Suite have an installation application similar to the Creative Cloud Suite? If so, how do I get it? If not, how do I upgrade from version 4?
    Thank you.

    Not sure what CCS has that you’re referring to, but TCS5 is out and can be installed via subscription or downloaded installer.

  • Does the iPod fifth generation have Wi-Fi?

    Does the iPod fifth generation have Wi-Fi?

    The iPod Touch 5th Generation does, the 5th Generation Nano does not (no current Nano has it).

  • Why when I merge clips in Audition CC  does the new merge file have no data?

    Why when I merge clips in Audition CC  does the new merge file have no data?  It happens in large projects and once it starts to happen I cannot get merge clips or bounce tracks to work correctly.

    files 1 of 2 and 2 of 2 are for all these languages:
    Chinese (Simplified)
    Chinese (Traditional)
    Czech
    English
    French (Standard)
    German
    Italian
    Japanese
    Korean
    Polish
    Portuguese (Brazilian)
    Russian
    Spanish
    Swedish
    Turkish

Maybe you are looking for