Does the LabVIEW TestStand UI button control support multi-line captions?

I would like the caption of a LabVIEW TestStand UI button control to wrap onto two lines (multi-line) instead of being confined to a single line.  For example, instead of the caption looking like:
Loop On Selected Steps...
I would like it to appear like this:
Loop On Selected
        Steps...
I have plenty of vertical space on my TestStand operator interface but my horizontal space is limited, so it would be preferrable to grow buttons vertically instead of horizontally.

Upon further investigation, it looks like this is a bug (or a "feature change") in TestStand 4.0.  The TestStand 3.5 UI button control automatically placed text on succesive lines if the width of the button decreased below the size required to accomodate all of the caption text on a single line.  However, this is no longer the case in TestStand 4.0.  TestStand 4.0 does not place text on successive lines when the button size decreases below the threshold.  I cannot figure out any way to place button captions on multiple lines using the 4.0 UI button control, including setting the caption programmatically with a carriage return inserted between successive text lines.

Similar Messages

  • In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame...

    In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame. To help protect the security of information you enter into this website, the publisher of this content does not allow it to be displayed in a frame ". On Chrome I get nothing but loading.

    Hi,
     This error is generally specific to Internet Explorer and has two possible causes. The most likely explanation is that your browser has unusual browser security settings. I would recommend you try
    resetting your security settings to defaults (varies by version but all essentially the same). You may also have to turn off
    Protected Mode which is enabled by default on some systems. If you’re seeing this error (or a version of it) outside Internet Explorer, you may have a server-level setting that is preventing your content from being framed.
    Reference:https://social.technet.microsoft.com/Forums/exchange/en-US/1460c5a5-6242-4402-9f6b-bc581bf56478/content-cannot-be-displayed-in-a-frame-when-trying-to-add-item?forum=sharepointgeneral
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

  • Does the apple thunderbolt to ethernet dongle support promiscuous mode ?

    Does the apple thunderbolt to ethernet dongle support promiscuous mode ?
    I need to use the new Retina MBP as a professional laptop for work, and I need to use Etherreal. Etherreal needs the Ethernet card/dongle/chip to run in Promiscuous mode. I have heard that unblivably the thunderbolt Ethernet dongle does not support this, if so then the laptop will not pick all the packets on the wire... is this true ?
    Regs Mark.

    Hi Clinton,
    Thanks for your reply, However the promiscuous mode function that I am after is a function of the Ethernet NIC hardware and driver not just the OS.
    Wireshark allows the user to put network interface controllers that support promiscuous mode into that mode, in order to see all traffic visible on that interface, not just traffic addressed to one of the interface's configured addresses and broadcast/multicast traffic.
    Anyone out there actually used/tested the thunderbolt Ethernet adapter to sniff traffic with wireshark (Ethereal), can you please  if it can run in promiscuous mode ?
    Thanks.

  • Does the mini ipad have parent controls?

    Does the mini ipad have parent controls?

    It has Restrictions.
    http://manuals.info.apple.com/en_US/ipad_user_guide.pdf

  • HT6099 why does the mac pro (late 2013) only support up to 60Hz at 1080p? TV screens are pretty much all 120Hz. So much for future proof.

    why does the mac pro (late 2013) only support up to 60Hz at 1080p? TV screens are pretty much all >120Hz. So much for future proof.

    http://en.wikipedia.org/wiki/4K_resolution
    http://en.wikipedia.org/wiki/4K_UHD
    http://www.techradar.com/news/home-cinema/high-definition/4k-tv-resolution-what- you-need-to-know-1048954
    Need More Pixels? Samsung’s 2014 UHD TVs Ship This Month
    Wall Street Journal · 2 hours ago
    Samsung’s 2014 lineup of Ultra High-Definition (aka 4K) TVs are on the way, and thanks to UHD content deals struck with Fox and Paramount—not to mention the…
    Focusing on TVs and 1080p and 60Hz isn't the question, or the 'future'

  • Does the Built-in Windows FTP Client Support a Secure Connection?

    I have set up Server 2008 IIS w/ FTP. I set the SSL setting to require a secure connection. However, I can't connect to the FTP server from the built-in Windows FTP client. I CAN get it to work in FileZilla after modifying my connection properties.
    Does the built-in Windows FTP client support secure connections? I received a request to set this up so our internal employees can share files with external customers. Many times our customers are unable to install any kind of third party software on their
    computers.
    Thanks in advance for the help.

    Hi,
    Based on my known, the built-in FTP client does not support secure connections.
    Similar thread:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/9500d7c2-cf18-4ab1-a0cb-1e277deab33c/is-it-possible-to-connect-to-iis-75-sslrequired-ftp-site-via-windows-explorer-or-ie-?forum=winserverNIS
    If it does not help, you could ask in IIS forums as Meinolf Weber mentioned.
    Hope this helps.
    Regards.
    Vivian Wang

  • What does the message "Another program has control of HP imaging device mean"?  I get this when I am trying to scan.

    What does the message "another program ha control of HP imaging mean when I am trying to scan something. How do i correct it?

    You may need to ask HP. I had the same issue with a networked (via ethernet) home HP multi-function. Sometimes the only way to get it to scan was to completely disconnect it from the network and connect it to only one Mac with a USB cable. Even that did not alwatys work.
    Eventually, Apple started pushing out HP printer updates via Software Update. One of those finally made that error message to go away.
    So run Software Update and see it there are new drivers that Apple made avaialble.

  • Does the Compaq Presario CQ60z-200 motherboard support SATA 3?

    Does the Compaq Presario CQ60z-200 motherboard support SATA 3? 

    Hi,
    Please try:
    Click the Disk icon,
    Click  "Number of Disk Controller",
    Look at the "Information" tab under "Drive Controller feature",
    Look at "Bandwidth".
    You should see 3GB/s or 6GB/s
    Note 3GB/s is for SATA 2 and 6GB/s is for SATA3
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hello Everyone ;P [ Does The MSI DKA 790 GX Platinum support 20 GB IDE HDD ]

    Hi MSI Forum Elites
    I am Wondering does the MSI DKA 790 GX Platinum support IDE 20 gig Hard drives.
    OS: Windows XP Pro with sp2 x86 [MSDN original]
    Installed RAM: 2 GIGS [Patriot - 2GB DDR2 PC2-6400 800MHz] [dot] takealot [dot] -com/computers/computer-components/patriot-2gb-ddr2-pc2-6400-800mhz,9600228
    i have an OLD formatted 20 gig HDD with me and i wonder
    there is A BIG yellow thing on the side below the SATA II ports
    Thanks
    STEAM_0:1:67164036 - Steam ID
    Steam Profile : /profiles/76561198094593801

    Quote from: badboy2k on 27-June-13, 21:13:01
    it should do as it supports upto 200GB IDE hard drives so i wouldn't think a 20GB one would be any problem (just one question here where on earth did you get a 20GB IDE hard drive as i haven't seen one of them since around 1998?)!
    i struck a Deal with a Guy on Gumtree {http://www.gumtree.co.za/fp-computers-software-in-capetown-westerncape/c9199l3100001}
    he wanted 2 Sticks of DDR2 RAM and he gave me 2 GB RAM DDR3. includin a 20 gig HDD and its a western digital.
    Pls add me on Steam. so we can discuss further.
    thanks
    STEAM_0:1:67164036
    Steam Profile : /profiles/76561198094593801
    P.s What kind of Cable do i need to wire from the Yellow thing to the BIG power structure on the HDD.
    on the hdd is a special cable thats only used now for inside desktop chassis etc.
    do you know anything. maybe post upclose photos for me so i can post on gumtree.
    its a south african site for ppl selling and buying unwanted stuff..
    one man's junk is another man's treasure

  • How does the Labview based program apply to computer which without Labview

    How does the Labview based program apply to computer which without Labview
    student number：1110340001

    SInce you list your "student number", you are probably using the student edition.
    You cannot build standalone executables with the student edition.
    You need LabVIEW professional. If you only have LabVIEW full, you need to purchase the application builder seperately.
    LabVIEW Champion . Do more with less code and in less time .

  • Does the SONY VAIO F Series SVF15412CXB support dual channel memory?

    Does the SONY VAIO F Series SVF15412CXB support dual channel memory?  Or does it only have one slot?
    I'm curious if I can put a second stick of RAM in there for dual channel performance.

    Hi Mark, Thanks for the response.  Can you please double check that for me, or post a link to the documentation where you saw that?  I asked this question on Newegg, too, and one of the respondants heard differently:
    "i found out from sony that there is only 1 slot cause i was gonna get 1 more 4GB stick of ram for 8Gb. So iwas upset about that cause i have to get 8GB now and it costs 100$ for an 8Gb stick of ram on ebay. So this ram is expensive. So im sticking with 4Gb for now. This is a very good laptop though. I use it primarily for minecarft and steam and i get around 100 fps on minecraft so its good. I hope this helps." It's just confusing because other laptop advertisments I've seen openly stated how many RAM slots the computer had and how many were used upon purchase.  I haven't found anything like that which makes me think that there's only one slot for RAM. Thanks,Gremark

  • Does the newly in-store unlocked iphone5 support WCDMA network globally?

    Hey guys,
    Does the newly in-store unlocked iphone5 support WCDMA network globally?

    Especially with China Unicom which was the WCDMA 3G network.
    Thanks

  • How does the LabVIEW adapter get VI type information?

    Hi, all,
    As I've mentioned in another thread,we're trying to programmatically generate TestStand scripts.  Since we're using the LabVIEW adapter, we will need to get the type ingotmation of controls and indicators from some VIs that the scripts will use. (These are all kept in one library.)
    I'd rather collect that type information from the VIs themselves than manually collect it or hardcode it.Then, if we add or modify the VIs, the new types will be generated.
    The LabVIEW adapter must have the ability to do this.
    Does anyone here know how it does?
    Thanks much,
    - Steve.

    SPM,
    As you may have already noticed, in the LabVIEWModule class there is a Parameters property that contains the items connected to the VI's connector pane.  This parameters container is read-only, meaning that while you can get each individual parameter and modify it, you cannot add new parameters.
    The parameters property will be created for you when you call Module.LoadPrototype.  This will read the VI's connector pane information from disk, and create the correct parameters property for you.  You can find an example of creating a LabVIEW step programmatically and setting its connector pane in this document:  Programmatically Create TestStand Sequence File with a Step that Calls a LabVIEW Code Module. 
    Please note that this example has not been updated since TestStand 3.0, and as such uses an obsolete method LabVIEWModule.LoadPrototype.  Please use Module.LoadPrototype instead.
    Josh W.
    Certified TestStand Architect
    Formerly blue

  • How can I tile up the execution window in the Labview Teststand user interface

    I am using the Labview User interface provided with the TestStand development environment.
    Running the BatchUUT.seq Example using the TestStand Sequence Editor, you will see that the Execution Window will be divided in 4 windows showing the execution status of the 4 UUTs.
    Running the same Sequence using the provided Labview User Interfaces (Simple or Full-Featured) will just show one window with the execution status.
    Is there a way to tile up the window to display the execution status in the Labview User Interface?

    Try something like this:
    You wouldn't use random numbers of course, but rely on already opened clones. So you would extend the "Manage Clones" to manage the data for the window position, but set it for each clone in the way the screenshot shows.
    hope this helps,
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • Does the labview 8.5 project have a search and replace option that appies to all vi's in the project?

    In 8.2, the only thing the project has to let you search for a vi is "Find vi's on disk", which is redundant since I can do that in windows explorer.  What I want is a way to search for vi's in my application the way the search and replace function works, except I want it to apply to all vi's in a project instead of just the vi's currently loaded in memory.  Do we have this in 8.5?
    -Devin
    I got 99 problems but 8.6 ain't one.

    I'll give an example of what I was trying to do yesterday in 8.2.  I tried to build a source distribution of a large instrument driver.  Since its an instrument driver there is no single top-level vi that contains all vi's - there are different categories of vi's to do different functions on my instrument.  When I'm doing the source distribution I have to do it in several stages since 8.2 doesn't do source distributions right - but thats not really what this post is about.  Anyway, every time I do the distribution I get an error saying CnvrtArrayIntoBitPattern.vi is password protected (and another engineer wrote it and I don't have the password).  So the build fails.  Now I don't know the password, I'll find it out later, but I at least want to know where in the hierarchy this vi is even being called.  I don't know where it is on disk, I don't know what is calling it, it isn't in the project explicitly, it's a dependency.
    If I had a top-level vi that loaded everything, I could just do a search and replace on that vi and find exactly where it is being called in seconds.  But since I am in a project and have no idea where to start looking, there is no way I can find this vi.  Ideally, in 8.5 there would be a search and replace menu option that searches all vi's in a project to find any calls to this vi.  I want to look for all instances of a vi in my project.  It sounds like you still can't really do that in 8.5.
    What I ended up doing is writing a vi that opens all vi's in a folder hierarchy on disk.  I don't know where this vi is, but all vi's in my project are in the same root folder.  So I run my program to open every single project vi.  Then since I know every single vi is open and loaded simultaneously I used the search and replace function on one of them to find all instances of CnvrtArrayIntoBitPattern.vi.  But that is a painstaking process to create a simple search function.
    I think NI is maybe misunderstanding how people are actually using a project.  Not every vi that is being called is going to be explicitly listed in the project.  (Its this same issue that makes source distributions impossible in 8.2 - you can't target dependencies to a support library so every dependency has to be explicitly listed in the project - which is virtually impossible because they are all in different locations and there are hundreds.)  Most people have lots of general purpose vi's they use in many different projects, and they are buried down in code so we aren't even sure where they are all being used.  The new searches you mention assume you already know where the low-level function is and you are looking for their callers.  But sometimes you don't even know where the low level function is.  What if its an NI directory function?  For example, "resample waveform.vi" is an NI function that changed its defaults in 8.2 which meant we had to find every single place we used it and wire "open-interval?" to a constant instead of depending on the default value.  Its in an NI library somewhere and is never listed as a project vi.  So when I needed to find every place through every project that I used this vi, I couldn't do it through  the project manager because there is no search function.  To be practical I add the project-specific vi's to the project, and maybe a couple support directories, but there will always be lots of vi's as dependencies.  But every now and then I'm still going to want to search for one of these vi's.  So in 8.5 there is there still no way to search for vi's that aren't explicitly listed in the project?
    -Devin
    I got 99 problems but 8.6 ain't one.

Maybe you are looking for