Does the latest airport extreme (A1521)support VPN, WCCP or proxy configurations?

First of all can I enable WCCPv2 on my airport?
And where is the proxy settings so that I can offload DNS caching
Can I add vpn client for a vpn services (https://www.privateinternetaccess.comy)
I saw this but asking anyway
https://discussions.apple.com/message/18300734#18300734

The answer is no to all of your questions.. airports support none of those things.

Similar Messages

  • Does the new airport extreme support backing up via time machine to an external hard drive pluged into the usb port

    Does the new airport extreme support backing up via time machine to an external hard drive pluged into the usb port

    Yes, but you might want to note that the port on the AirPort Extreme is only USB 2.0, and that it runs at about half the speed of the USB 2.0 port on a computer, so things are going to be quite SLOW as far as backups are concerned, or anything else for that matter.

  • HT4145 Does the new Airport Extreme allow "guest network" setup across all my Airports on my network? I have 1 Airport as a router and 6 others as WAP's (bridged)

    Does the new Airport Extreme allow "guest network" setup across all my Airports on my network? I have 1 Airport as a router and 6 others as WAP's (bridged)

    I assume that all of your WAPs are hard wired on the network.
    If.....all of your WAPs are simultaneous dual band Apple AirPort devices like an AirPort Extreme or new AirPort Express.....and.....you have firmware version 7.6.3 (now 7.6.4) installed on all the AirPorts.....and.....you use AirPort Utility 6.3.1 to configure the devices......in theory.....it should work.
    I don't have 6 WAPs, but I do have 3 and the network works perfectly allowing extension of both the "main" and "guest" network.

  • Is 6.3 the latest Airport extreme update?

    Trying to get my replacement Airport Extreme Base up to speed. The latest update (Numerically) is 6.3..but that came out last Jan.? I know that with 10.4.8 came with an airport update, but I don't know how I can get just that particular one. I don't want to re-download 10.4.8 again. Thanks, Bill

    The latest firmware for the Airport Extreme Base Station is 5.7
    The latest firmware for the Airport Experss Base Station is 6.3
    The latest Airport software for Macs is 4.2

  • Does the new Airport Extreme work with Airport Express??

    I just installed the new airport extreme and I can't get my airport expresses to function as a part of the network. Does anyone know how to get past this? Do the expresses work with the new extreme?

    I assume this issue is true for both Express base stations ... that is, that their status lights go to solid amber when removed from the Extreme base station. A solid amber would indicate that the base station has failed to reinitialize with its "new" configuration.
    The only recommendation I have at this point, is to start over with just a single Express. Perform a "factory default" reset on both the Extreme and the Express. Leave them both powered-off after they complete their respective resets.
    Power-up the Extreme. Leave it in its default configuration which is to broadcast an unsecured wireless network with a Network Name of something like: Apple Network NNNNNN. Connect the Express to one of the available LAN ports on the Extreme, and then, plug the Express into power.
    Your Mac should shortly "see" the new base station in the AirPort drop-down menu from the OS X menu bar. Select this new station and the AirPort Utility should start up. Use the utility's automated steps to configure the Express to extend the Extreme. Allow the Express to restart.
    Now remove the Express from power, and then, disconnect it from the Extreme. Place the Express in another location in the same room and plug it back into power. Does it eventually give you a green status light?

  • HT204057 I have the latest airport extreme. can not access the files.

    I have previously time machine backups for two macbook pros on same drive.
    However, I connect the drive to the airport extreme and although I see the drives and the backups, I can not access the files over Airport Extreme. 
    What am I doing wrong?

    You can't access a Time Machine backup that way. Connect the drive directly, hold down the option key, and select Browse Other Backup Disks from the Time Machine menu.

  • 2Wire and the Latest Airport Extreme Cards

    After searching the MacBook and Airport forums, I know a lot of folks out there are experiencing this. I purchased 3 MacBooks, two new White 2.0 GHz C2D and one refurbished 1.83 GHz. I can't get the new ones to log onto the 2Wire network. The refurb has no problems. A 17" PowerBook has no problems.
    The software for the refurb and one of the 2 GHz MacBooks are all up to date. Those two were set up in another location and were logged into another home network. I'm getting suspicious about the firmware loaded into the MacBook's AP cards.
    The 2.0 GHz MacBook Airport Extreme firmware version is 1.0.27p3. I don't know what the 1.83 GHz firmware version is because that one is far away with its recepient (I'll have to call him and find out). My PowerBook and G5 Airport Extreme cards both use the same version: 405.1 (3.90.34.0.p18).
    Does anyone out there know if there are any differences between the Airport firmware loaded in an older MacBook (MA254LL/A or FA254LL/A) and the current ones (MA700LL/A)? If there is, it looks like the the current models are incompatible with 2WIRE wireless networks. Apple, what did you folks tweak between the original MacBooks and the current (late 2006) ones and can we please get an Airport firmware update that either regresses back to that or fixes this issue?

    Opus_Maru, Welcome to the discussion area!
    There is no way for the user to directly affect the version of firmware being used by the AirPort Extreme card or the built in 802.11g wireless capability. The firmware is updated silently and without any notice when an AirPort Software update is applied to the Mac.

  • Does the latest version of Firefox support Trusteer Rapport 3.6.1105.60? This is a recommended application by my bank.

    The last time I downloaded the latest version it would not support the Trusteer Rapport application recommended by my bank to secure my password etc. information.
    I am currently running Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.7; en-US; rv:1.9.2.23) Gecko/20110920 Firefox/3.6.23 and do not want to compromise my security with on line banking.

    @sofianyc2003 Download one of the previous versions in the link mentioned above.

  • Why does the latest version of HP Support Assistant crash every time I try to use it?

    I have an HP 6730f desktop with Windows 7 preinstalled.  Recently, I was advised to upgrade the HP Support Assistant program by HP through an update message.  Upon doing so, I am unable to start the program without an error message that states that a serious problem has occurred and the program must close.  I have since uninstalled the program entirely. I would,  however, be satisfied with the Support Assistant that came with the computer, but wonder why the updated version does not work...?

    Hello PCJim,
    Have you tried reinstalling the program since uninstalling? It could of just been a bad install that required needing to uninstall / reinstall.
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • Does the latest cFP product offering support web services like the cRIO?

    I'm wondering if the cFP family supports web services like cRIO.  I used cFP with LV8.5 a few years ago and there was no support.

    Hello,
    Yes you can. The process for running a web service from a cFP RT controller is the same for a cRIO.  The procedure is documented in the article Running a Web Service from a Real-Time Target.  Let me know if you have any questions.
    Have a great day,
    Justin Parker
    National Instruments
    Product Support Engineer

  • Existing files on drive connected to latest Airport Extreme do not show up, however files copied over the air to the drive do. Any ideas?

    I have the latest Airport Extreme with a Seagate drive connected. I copied files to the drive while it was connected to my MacBook Pro. The files do not show up when connected to the AE, but they appear when connected to the Macbook, Files copied over the network to the drive appear. The drive is formatted HFS+.

         After playing with this for the last few days, I found a solution. Under the "Disks" tab in Airport Utility, the "Secure Shared Disks" drop down needs to be set to "With device password". Mine was set to "With acounts", which even after correct authentication, none of the files would appear.
         Another interesting note:  The files that I could see, the ones I copied over the network, do not appear now. I can copy over new files, and they show up, but the ones copied prior to changing the "Secure Shared Disks" option, do not.

  • Does the latest firefox support Sticky Password?

    Does the latest version of firefox support sticky password?

    Hello rick123a, from what i can see in Sticky Password 6.0 release notes, yes supported till 26 firefox version (latest stable ff version is 25.0.1, tobay 21 Nov 2013) : http://www.stickypassword.com/download/release-notes
    thank you

  • Can I add a WiFi printer through WPS with the new AirPort Extreme and AirPort Utility 6.3?

    It says here that AirPort Utility 6.2 supports WPS-capable WiFi printers, but on the new AirPort Extreme techs pecs Apple insists that the way printing is shared is by connecting the printer to the AirPort Extreme with a USB cable, which really defeats the whole purpose of WiFi printing doesn't it?
    Does the new Airport Extreme support WPS-capable printing? Does AirPort Utility 6.3 support it?

    Does the new Airport Extreme support WPS-capable printing?
    Yes
    Does AirPort Utility 6.3 support it?
    Yes

  • Latest airport extreme noise issues

    Just received the latest Airport Extreme.  Worked perfectly for 2 days and still does.  But, started emitting the noise that others have described, sort of like the static or popping from an old radio.  However, continued to work normally. Noise lasted for about an hour and nobody was using the network. It has been quiet now for about a day.  The unit continues to perform normally. Are there any other recent updates on this issue?

    No, it is not common.. but anything with internal power supply will occasionally have a loose inductor.. with your 50 or 60hz mains buzzing through it.. a loose winding can make strange noises.. some caps can also make noises.. the incoming AC is rectified to 300-400v DC is a lot of volts and stresses a poor component. There is also a mechanical fan.. and fans are also a source of all kinds of noises. I would say this is entirely a hardware fault and has nothing to do with firmware.. so it is not going to be updated. It is simply going to need replacement.
    If it starts again.. in fact I would power off the AE overnight.. and power up cold the next morning.. and do that every night for the next week.. if it ever does it again.. return immediately to apple for replacement.. The build quality of the AE and TC is less than spectacular.. my first new AC model Time Capsule lasted less than a week. Replacement is fine.

  • Windows 7 with latest AirPort Extreme

    I have just bought the latest AirPort Extreme. Set-up using airport utility on all my apple products worked like a charm. I then installed airport utility and updated it in my old windows 7 laptop.
    - airport utility on windows 7 cannot detect the wifi network
    - windows 7 can however see the wifi network when I go to network properties, but it cannot connect to it
    - I tried shifting the AirPort Extreme from WPA 2 to no security, and windows 7 still cannot connect nor is airport utility finding the network
    - I tried changing the channel on the AirPort Extreme to channel 11, still nothing
    My old laptop on windows 7 has a b/g wireless card. I am afraid the AirPort Extreme is not compatible with b/g, or if it is, do I have to set it to it, and if so where?
    Any other tips as to what I could change in the settings of the AirPort Extreme or windows 7 to either have airport utility see and connect to the network, or connect through windows 7 network properties?
    Thanks
    Philippe

    On one of your Macs, run the utility, select your base station and click the edit button. Select the wireless tab,
    Then click the Wireless Options button
    Pick Radio Mode and see what works best for all your systems.
    Hope this helps.

Maybe you are looking for

  • KKS1 Only remaining var. in version 0 - no target cost Message no. KV151

    Hi, I am trying to variance calculation using T-code KKS1 but i am facing error as below, Only remaining var. in version 0 - no target costs for 000001000010 Message no. KV151 Diagnosis For the calculation of variances with 000001000010 , the target

  • RFC - XI - JDBC Scenario Updating Multiple Tables

    I'm an XI rookie who is looking for some assistance with my first interface.   I am using an RFC adapter on the outbound side and a JDBC adapter on the inbound side.  My function passes back four internal tables that I would like to map to 4 differen

  • Accesing image files in java beans

    hi all I am developing an application which needs to access images files put in image folder in java bean file. I tried a lot by using different methods and failed always, except in case of absolute path which I dont want to use. My directory structu

  • E-Recruitment candidate questionnaire activity

    Hi , I have added the an questionnaire to process template and same template i have added to requisition . Now , when i am executing the questionnaire activity for assigned candidate's  and its sucessfully executed. Issue: i am not able to see questi

  • JDeveloper for LINUX

    Where can I download JDeveloper for LINUX. There is a link in products, but it isn't able. Minoru.