Does the latest Gateway Max adsl router support the 4g mobile dongle?

our landline is being delayed by cabling shortfalls to our property and the Telstra "Move Team" suggested we buy a 4g dongle to share, my 3 year old router only supports G3 dongles and doesn't load the G4 version so I'm wondering if we were to get the latest Gateway Max whether that would. At least our mobile devices like iPads etc would function over wifi.
I found a little info on the gateway max 799 and it just says G3 but would like to know if the G4 dongle will just step down in this router?
Thanks in advance.

Hi, I also have the Telstra Gateway Max and I want to install the 4G USB dongle to provide internet fallback for when the landline fails (which appears to be happening a lot more often over the last two months - up to 21 days in total so far). I went to the Telstra shop today and bought the Telstra 4G USB+WiFi Plus dongle which I am told should work with the Gateway Max. However, nobody there could tell me what to do to get it working. They said simply plug it in and it should work. I did this and of course it did not!! Does anyone know how to configure the Gateway Max to see and use the dongle when the ADSL/Landline service fails next time? I will be able to test if it is working by unplugging the ADSL service from the DSL port on the Gateway Max - that part is the easy bit. If there is a guide somewhere on Telstra's site on how to do the configuration work that would be great. Otherwise any help would be just as great I'm sure!! CheersCraig

Similar Messages

  • Does the iOS mobile application Lync have any managed app parameters available?

    Since iOS 7, MDM platforms have been able to push out certain "managed app parameters" to applications, but only if the application was developed to have that available. Does the iOS mobile application Lync 2013 (App
    Store Link) have any managed app parameters that can be used by
    MDM solutions?

    Hi,
    Lync 2013 provides UCWA Web API, refer the link below for more information on the architecture and more. Since its web based you could be able to develop some API for iOS.
    http://msdn.microsoft.com/en-us/library/dn324971(v=office.15).aspx
    Also, I found a third party API that fully integrates and provides API for mobile OS includes iOS, Andriod...,
    http://www.prweb.com/releases/2013/8/prweb11067929.htm

  • Could Cisco 1701 ADSL Router supports WIC-1ENET Card.

    Hi,
    I need advise as to if a Cisco 1701 ADSL router could support WIC-1ENET Card.
    My 1701 Router has WIC 0 as ADSL and WIC 1 as ISDN, could the ADSL card be replaced by a WIC-1ENET. I noticed ,that the cards seems to be rivet onto the back of the Router and not connected with SCREWS as other routers would posses.
    Could someone advised as to how i can have this router supports 2 Ethernet NICs or what could be your recommendations?
    Thank you,
    Cisco End User.

    Hello,
    the WIC-1ENET is supported on the 1701, but, AFAIK, only in slot 0.
    It does not support 2 WIC-1ENET cards, only the 1720, 1750, and 1751 do, with a specific IOS release, check out this info from CCO:
    WIC-1ENET- Support for two Ethernet WICs
    The Ethernet WIC (WIC-1ENET) provides the capability to deploy additional Ethernet port(s) in a Cisco 1700 series routers. The initial release of the WIC-1ENET supported only one WIC-1ENET card in a 1700 router. The new IOS 12.2(2)XJ release offers the option of deploying up to two WIC-1ENET adapters in a Cisco 1720, 1750, or 1751 router. A total of three Ethernet ports can be configured. A typical application that requires three Ethernet ports involves using the built-in 10/100 Fast Ethernet port for LAN segment. One of the WIC-1ENET port could be used for high-speed broadband DSL or cable modem connection. The second WIC-1ENET port could be used for a DMZ (demilitarized zone) environment for deploying public Web servers or FTP servers. Hardware modification is not necessary to use the capability of IOS 12.2(2)XJ. The new IOS software is compatible with WIC-1ENET adapters already installed in 1700 series routers.
    HTH,
    GP

  • Where does the Sony Mobile, and whether the leader?

    Refinement on your smartphone Sony vzgyada
    You have filled up the market models and goofy as I know are going to fill up even more before the end of the year.
    Each of these models to your Plus has some serious drawbacks.
    Make a mistake, the same company HTC - is silly.
    You put a potential buyer into a dead end, releasing
    to market a number of obscure, sometimes even bizarre, models.
    Apple takes a year to market a new Iphone.
    At the same time fans of the brand to snatch as
    hotcakes. Because they know that they have purchased a masterpiece a year or two.
    And the approach that the firm has chosen Sony (the line of smartphones: Spring 2012, Summer 2012, Fall 2012 ....) is incorrect.
    It faces the crisis of overproduction of models that do not who do not buy it. And, regardless of price, because the average person, even an amateur smarftonov powerful, like me, will not change the smartphone every 2-3 months.
      Maybe in Japan decided to change smart phones every two to three months, but Russia has decided to use it a little longer (six months, one year, two years) and so I would like to have all of Sony's flagship to the maximum in quality, the iron, the battery, based on the case, the screen, and the operating system shell.
    Apple has a Iphone (October - Iphone 5)
    Samsung has GSS (3)
    I really hope that Sony will be a very decent answer and I will not be ashamed of my favorite company.
    P.S. And always wanted to ask why the firm, recently producing cameras with batteries
      batteries are weak in smartphones?
    (Owner of the smartphone Arc S)
    Russia.
    The city of Magadan

    I'm sorry but I don't understand everything in your post. What can I help you with?
    What do you think about this forum? Let us know by doing this short survey.

  • Does TC work with an ISDN router?

    I have a friend with an ISDN internet router with ethernet ports, and a windoz pc.
    Now he would like to add a macbook with TC, for TM and wireless internet connection.
    Question is simple: does TC works if connected to an ISDN router, or does he absolutely
    need an ADSL router?

    In fact, I couldn't believe when my country Apple Store told me by phone
    "no, the TC cannot be connected to an ISDN modem"....
    So I have a new question: the first time, when we need to configure the TC,
    we have to connect the macbook with an ethernet cable, right?
    We don't want to use the pc to do this task.

  • Final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support.  Have tried reinstalling

    final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support, paralyzed.  Have tried reinstalling, default settings etc
    Appreciate suggestion, working on deadline. Thanks.  

    Here is the start of the crash report:
    Process:         Final Cut Pro [20568]
    Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:      com.apple.FinalCut
    Version:         10.0.1 (185673)
    Build Info:      ProEditor-185670300~1
    App Item ID:     424389933
    App External ID: 4138831
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [102]
    Date/Time:       2011-11-11 20:41:32.201 -0800
    OS Version:      Mac OS X 10.7.2 (11C74)
    Report Version:  9
    Interval Since Last Report:          192058 sec
    Crashes Since Last Report:           14
    Per-App Interval Since Last Report:  157161 sec
    Per-App Crashes Since Last Report:   14
    Anonymous UUID:                      DD542B2F-58A0-482E-AAFA-ECADEC76F562
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000280000003
    VM Regions Near 0x280000003:
        CG shared images       00000001cbf62000-00000001cc182000 [ 2176K] r--/r-- SM=SHM 
    -->
        STACK GUARD            00007fff5bc00000-00007fff5f400000 [ 56.0M] ---/rwx SM=NUL  stack guard for thread 0
    Application Specific Information:
    objc[20568]: garbage collection is OFF

  • Does the Cisco 26XX-XM router support E1 CAS signaling

    Does the Cisco 2600-XM series router support E1 CAS signalling for its E1 digital voice port or jst only support E1 R2 signaling.
    Thanks

    Only E1 R2 and E1 PRI.
    Taimoor

  • I want to use my jetpack 890L as a wireless router to allow wireless printing with a canon laser printer. Is this possible, and does the jetpack support WPS?

    I want to use my jetpack 890L as a wireless router to enable wireless printing with a canon laser printer. Is this possible, and does the jetpack support WPS?

    I’ve used several wireless printers with a 4510 and 5510 Jetpack and they all print just fine. The MHS890L does not support WPS. The WPS Wikipedia article briefly addresses the reason why you should not use WPS.  If you’re having trouble setting up your printer the manufacturer has a toll free support line to help you. Your Jetpack has the Wi-Fi Password on the bottom, under the battery, and or in the LED display.

  • Does the latest firefox support Sticky Password?

    Does the latest version of firefox support sticky password?

    Hello rick123a, from what i can see in Sticky Password 6.0 release notes, yes supported till 26 firefox version (latest stable ff version is 25.0.1, tobay 21 Nov 2013) : http://www.stickypassword.com/download/release-notes
    thank you

  • Does Timecapsule work with the new xfinity wireless gateway 1 modem / router?

    My husband hooked up the new xfinity wireless gateway 1 modem / router today and now I can't access my Timecapsule to back up my Mac. Comcast has not been able to help me...and they can't get me back on our old Comcast modem so I can access my Timecapsule, which has worked fine for several years. Can anyone offer a solution?

    Thanks for the suggestion. I have no idea why but all of a sudden the Time Capsule backed up my Mac before I had time to do as you suggested...although the back up process was very slow. I'll see if it gets faster over the next few days...will resort to your suggestion if needed. Thanks again!

  • Does the latest version of Firefox support Trusteer Rapport 3.6.1105.60? This is a recommended application by my bank.

    The last time I downloaded the latest version it would not support the Trusteer Rapport application recommended by my bank to secure my password etc. information.
    I am currently running Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.7; en-US; rv:1.9.2.23) Gecko/20110920 Firefox/3.6.23 and do not want to compromise my security with on line banking.

    @sofianyc2003 Download one of the previous versions in the link mentioned above.

  • Making a VoIP call with the Cisco 837 ADSL router

    I would greatly appreciate if could please provide some technical assistance to my questions below:
    Is it possible to make a VoIP call between two 837 ADSL Cisco routers over a 1Mbps ADSL broadband connection?
    If so, can I configure this VoIP connection using either a PPPoE or ATM WAN link?
    Is it possible to make a VoIP call using a Cisco 837 Router while simultaneously surfing the Internet? In other words do I need two public IP addresses i.e. one for accessing the internet and one for making the VoIP call or is one static IP address obtained from my ISP sufficent.
    It is possible to configure QoS parameters (e.g. RSVP, Voice precedence, Voice codec selection) on this 837 router using PPoE or can it only be done using an ATM WAN interface?
    Does the Cisco 837 router support both the H.323 and SIP communication protocols? Do I need to purchase a certain IOS operating system version for VoIP calling?
    Does the VoIP dial peers need to be configured with both a POTS and VoIP phone numbers or is only one number required?
    Do I need to obtain a special VoIP number from my VoIP service provider? or can I use existing POTS numbers or made up numbers within the dial peers as this situation involves making a private VoIP call between two branch offices using 837 ADSL routers and not via a VoIP service provider.
    Finally, can I use POTS ordinary telephones with the Cisco 837 for making VoIP calls or do I strictly need to purchase VoIP phones?
    My apologies for the number of questions asked here but I currently need to know the technical ability of the Cisco ADSL 837 as I am thinking of employing these routers in my company organisation.
    I await your feedback in due course.
    Thanks,
    Martin Healy

    Hi,
    I give you a sample config of my router.
    class-map voice
    match access-group 101
    policy-map mypolicy
    class voice
    priority 128
    class class-default
    fair-queue 16
    ip subnet-zero
    gateway
    interface Ethernet0
    ip address 20.20.20.20 255.255.255.0
    no ip directed-broadcast (default)
    ip route-cache policy
    ip policy route-map data
    interface ATM0
    ip address 10.10.10.20 255.255.255.0
    no ip directed-broadcast (default)
    no atm ilmi-keepalive (default)
    pvc 1/40
    service-policy output mypolicy
    protocol ip 10.10.10.36 broadcast
    vbr-nrt 640 600 4
    ! 640 is the maximum upstream rate of ADSL
    encapsulation aal5snap
    bundle-enable
    h323-gateway voip interface
    h323-gateway voip id gk-twister ipaddr 172.17.1.1 1719
    h323-gateway voip h323-id gw-820
    h323-gateway voip tech-prefix 1#
    router eigrp 100
    network 10.0.0.0
    network 20.0.0.0
    ip classless (default)
    no ip http server
    access-list 101 permit ip any any precedence critical
    route-map data permit 10
    set ip precedence routine
    line con 0
    exec-timeout 0 0
    transport input none
    stopbits 1
    line vty 0 4
    login
    voice-port 1
    local-alerting
    timeouts call-disconnect 0
    voice-port 2
    local-alerting
    timeouts call-disconnect 0
    voice-port 3
    local-alerting
    timeouts call-disconnect 0
    voice-port 4
    local-alerting
    timeouts call-disconnect 0
    dial-peer voice 10 voip
    destination-pattern ........
    ip precedence 5
    session target ras
    dial-peer voice 1 pots
    destination-pattern 5258111
    port 1
    dial-peer voice 2 pots
    destination-pattern 5258222
    port 2
    dial-peer voice 3 pots
    destination-pattern 5258333
    port 3
    dial-peer voice 4 pots
    destination-pattern 5258444
    port 4
    end

  • Does MMX400R wifi pocket router support for iPad?

    I'm using iPad wifi module.  I'm planning to purchase MicroMax pocket router 400R. I just want to know the pocket router will support iPad.

    no i don't think it does wps. but i think you can still configure the wireless router with the ipad. if you connect to it, just type in the gateway address into safari, logon, and configure
    uncle_tungsten wrote:
    Sorry, I left out an assumption.  The router has not been configured; there is no configured SSIS, username, or password.  The wireless router requires an Ethernet connection be made with a PC, to connect to the IP address of the router and configure it.
       In my case, I want to configure without using a PC.  The router supports the WPS protocol which does not require configuring the SSIS,username, password.  My question was whether the iPad supports that protocol.  Then, I should be able to enable WPS and click the WPS start button on the router.  The iPad should then connect.

  • Does the WRT310N support jumbo frames?

    Greetings one and all.
    Does anyone know if the WRT310N Wireless-N Gigabit Router support jumbo frames?  I have a Buffalo Linkstation Mini NAS that contains a Gigabit Ethernet card.  The NAS can support jumbo frames provided the switch it's connected to has the capability.
    Thanks

    I did a live sesion with the tech support desk
    The WRT320N does have hardware support for Jumbo Frames.
    Only on the Firmware (Software Side) it's not enabled yet what can easy be done by the Linksys/Cisco development team.
    see PDF broadcom BMC53115
    http://www.dutchmans.serverthuis.nl/BCM53115.pdf
      (Mod Note: Removed chat script)
    Message Edited by daikunzeon on 11-27-2009 10:53 PM

  • Does the latest iPad have flash Player built in?

    Does the latest iPad support Flash Player? Is it built in?

    No Flash for iPads, iPhones, or iPods
    Here's why there's is no Flash available for iDevices or other mobile devices. Adobe was unable to provide a product that was suitable to the needs of battery powered mobile devices used for Internet browsing. Existing Flash technology used too much memory, ate battery life, and was buggy. Simply put Flash did not work well on mobile devices.
    Apple's Steve Jobs led the escape from Flash dependency when Apple introduced the iPhone, and later introduced the iPad. There was a hue and cry over the omission. Time proved Jobs was right on target.
    So this is why there is no Flash for your iPhone or iPad or iPod nor for most SmartPhones. Flash has been abandoned by many sites in favor of supported technologies such as HTML5 or by providing their own custom app.
    Here is Steve Jobs official comment on his momentous decision to omit Flash from iDevices: Steve Jobs on Flash.
    Here is Adobe's later announcement to cease development of Flash for mobile devices: Adobe on Mobile Flash. Adobe is not providing Flash for Apple iOS devices, and they no longer provide Flash for any other cellular phones. Flash is officially gone.
    Now, you are not necessarily out on a limb. There are some apps that can display some Flash, but don't count on there ability to display anything using Flash.
    A sample of Apps that can display some Flash content:
      1. Puffin
      2. SkyFire
      3. Photon Flash
      4. Browse2Go
      5. Swifter
    Also, note that many sites that use Flash provide their own app for accessing their material. So check with your favorite sites and find out if "there's an app for that."
    Download the Facebook app from the iTunes Store. Sign in with your Facebook ID and Password and you won't require flash to play videos.

Maybe you are looking for