Does the Lens Profile Creator work with Photoshop Elements 8.0..?

Hello,
I am very new to the world of Photoshop, so please forgive if this is an obvious/stupid question...
I am using Photoshop Elements 8.0 and I have a couple of pictures that I need to remove the 'fish eye' lens distortion from around the edges...
The blurb for the Lens Profile Creator says that it is for use in the "Adobe Photoshop® family of products"...
Does this include Photoshop Elements 8.0 or do they really mean it is just for Photoshop CS5, Camera Raw and Photoshop Lightroom...
Any help will be appreciated...
Many Thanks
mc1903uk

PSE does not have the user-interface to turn on lens-corrections, nor does the ACR 6.1 update for PSE contain the lens-profile database installer, so if PSE is the only member of the PS-family that you have installed then effectively you cannot apply lens profiles.
If a computer has the lens-profile database installed and lens-distortion-correction has been enabled in the XMP sidecar for a particular image, both requiring PS-CS5's ACR 6.1-updater or LR3 to be installed and one of those used to enable lens-corrections for the image, then PSE can use ACR 6.1 to apply a lens profile, because the version of the ACR 6.1 plug-in for PS and PSE is the same plug-in.
BTW, removing fish-eye distortion completely, which is what enabling lens-corrections does by default, will leave a rather poor looking image that has been completely rectilinearized but has severe stretching of the pixels at the edges, so only the center is useable. With my 8mm Sigma fisheye, I reduce the Distortion part of the correction down to 44 so the black corners are gone, but there is still some bulging of the image.
If you want to experiment with lens-corrections, you could install the 30-day trial of LR3.

Similar Messages

Does Camera Raw 6.3 work with Photoshop Elements 8

It looks like I can't
update Camera Raw to 6.3. since I use PSE8..is that true? I only update PSE every two
editions, but have both a Canon 550D and a new Powershot S95. Any advice?

Yes that's true, 6.3 won't work with pse8.
You can use the 6.3 dng converter to convert your camera raw files to
the dng format which pse8 can then open.
Windows
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4924
Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4923
MTSTUNER

Does Lightroom work with Photoshop Elements

Does Lightroom work with Photoshop Elements?

When setting up the editor in the prefs choose images of 8 bits not 16 bits, either PSD or tiff. Elements works best with 8 bit images. For example you can't use layers with 16 bit images.
Once you have set up the LR prefs you are ready to make the round trip:
1) Ctrl+E in the Library to export selected image with develop settings or right-click and choose Open In Photoshop Elements Editor
2) Make your adjustments in Photoshop Elements; then Ctrl+S to replace (overwrite) Lightroom export copy
3) Ctrl+W to close in Photoshop Elements and update Lightroom thumbnail.
On Mac OSX Cmd+E; Cmd+S; Cmd+W
The important point is to overwrite the LR export copy by using File >> Save (Ctlr+S) because a tiff or PSD file has been automatically rendered by LR based upon your preference setting for External Editing. If you use “Save As” you create a new document which LR knows nothing about. It will only show in the LR Library if you save.

How well does the iPhone 5s/5c work with Wind Mobile?

I'm going to be (hopefully) getting the iphone 5s or 5c soon and I'm trying to decide on which carrier to go with. How well does the iphone 5s/5c work with wind mobile and how fast is the internet with data?

http://www.windmobile.ca/
iPhone: Wireless carrier support and features

Does the Apple A1096 adaptor work with the A1081 monitor? Can any one help? Thanks, Paul

Does the Apple A1096 adaptor work with the A1081 monitor? Can any one help? Thanks, Paul

Click on this link for the fix http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/

Does the Apple remote control work with MacBook Pro with retina? If yes, how can I sync it?

Does the Apple remote control work with MacBook Pro with retina? If yes, how can I sync it?
Thanks!

It should. First, turn on BlueTooth on the computer. In BT preferences be sure to check the option to look for all devices. Your remote should be picked up and a notice asking if you want to Pair it with the computer. Select Yes. Once it is paired it can be used to control your computer.

Does the content area API work with Release 2?

Does the content area API work with Release 2 yet?

Release 2 page group APIs will be available in early 2003, in the first PDK version following the 9.0.2.6 (upgrade) release. These APIs will be backward compatible with the 3.0.9 content area APIs.

Does the plantronics marque m155 work with the iphone 4S?

does the plantronics marque m155 work with the iphone 4S? can you use siri with the bluetooth headset

http://www.apple.com/support/headset/

Does the microsoft surface rt work with iPhone/ipod?

Does the microsoft surface rt work with iPhone/ipod?

I have an iphone and was told that the surface rt cannot be sycned to my iphone like my
Music directly. I think thats crap and am deciding whether or not to get the surface as my laptop. Do you know if it is able to sync music from it to my iphone?

Does the PS3 Bluetooth Headset work with the IPod Touch 4Gen?

Does the PS3 Bluetooth Headset work with the IPod Touch 4Gen?
I really need to know. I have been trying to Pair them but it never shows up on the IPod. Anyone know the problem?

Is it A2DP?
The ipod touch does not support telephone headsets, just stereo headsets.
http://support.apple.com/kb/HT3647

How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)?

How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)? The advertising refers to Print Studio Pro 2 but all I find available to download is version 1.35.

Thanks - I did notice that the 2 was a superscript on one site but on another (I think the one for the Pro-10 printer) it was definitely a 2 in line with the rest of the text and separated by a space (at least on my browser). At any rate, I suspected something of the kind and will simply use Photoshop Elements 11 when I want a pattern print until the change is made.
If you have an inside line to Canon you might also suggest some changes to their Image Garden program, specifically its handling of DVD label projects. It has several themes and within each theme several layouts. As far as they go these are fine but they do not give nearly enough flexibility. The boxes for insertion of images are useful as is the simple procedure for rescaling the image so it is cropped in varying ways while staying within the fixed box. However, it should be possible (a) to relocate the boxes on the page and (b) to resize and reshape the boxes - probably by a control which would become available by right-clicking on the box. For example, there are times when the user might want to include a full 16 x 9 frame shot as one of the images, and in general the aspect ratios of the provided boxes do not permit this.
I have over the years preferred to use Word for this purpose after setting up masks to expose just the printable area of the DVD or Blu-ray disc, setting up the margins so that the center of the disc is in the horizontal center of the page, and finally introducing text and pictures and adjusting the font size of blank lines above the disc to line everything up properly in the vertical direction. A typical layout might involve one large picture, located so the center hole and the curved outer edge do not block anything important, or two pictures side by side, or four pictures centered vertically (to minimize the effect of the outer edge of the disc) but possibly of different widths (so as to make both close-ups and wide scenes optimal on the same disc label). The text then goes above and below the pictures. All of this works perfectly so I probably wouldn't use Image Garden very often for this purpose, but the inability to resize and relocate the boxes must be very limiting for others as well.
Some of the layouts have image locations severely reduced by the edge of the disc.
As I said ... if you have an inside line to Canon .. but if not, please excuse the length of this post!

Can Kuler work with Photoshop Elements 5.0

Can Kuler work with Photoshop Elements 5.0 and is it of
value?

Hi Chuck,
Photoshop Elements 5.0 does not support Adobe Swatch Exchange
(ASE) files, but you can copy/paste HEX values from kuler into
Elements.
Lydia

When I zoom in to see all the details of a photograph with photoshop elements 8 the photo become pix

When I zoom in to see all the details of a photograph with photoshop elements 8 the photo become pixelated. is there a way I can anti alias the photo after I blow it up?

Hi ,
Anti- alisa feature only available to text layers not image layers.
you can add blur to make it smooth (if image has not too much details ).
thanks,

Adobe Lens Profile Creator Crashes with DNG files

Hi, I'm using Win 7 with the latest version of the Adobe Lens Profile Creator, v 1.0.4. I have no issues generating profiles from jpeg or tiff files, but every time I try to add a DNG file, I get a "Adobe Lens Profile Creator has stopped working..." error message. The DNG files were created from a Canon 5D Mk II .CR2, using the latest DNR converter 7.3.
The crash information from Windows Reliability Monitor goes:
Description
Faulting Application Path:          F:\Adobe Lens Profile Creator\Adobe Lens Profile Creator 1.0.4\Adobe Lens Profile Creator.exe
Problem signature
Problem Event Name:          APPCRASH
Application Name:          Adobe Lens Profile Creator.exe
Application Version:          1.0.0.0
Application Timestamp:          500d1325
Fault Module Name:          Adobe Lens Profile Creator.exe
Fault Module Version:          1.0.0.0
Fault Module Timestamp:          500d1325
Exception Code:          c0000005
Exception Offset:          0007ce0c
OS Version:          6.1.7601.2.1.0.256.48
Locale ID:          1033
Additional Information 1:          0a9e
Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
Additional Information 3:          0a9e
Additional Information 4:          0a9e372d3b4ad19135b953a78882e789
Files that help describe the problem
AppCompat.txt
WERInternalMetadata.xml
memory.hdmp
minidump.mdmp
Really appreciate any help to solve this issue, so I can continue to create raw lens profiles. Thanks!

German Jack ha scritto:
create an jpg/tif – profile
create a copy from the lcp
rename this copy with “ – RAW”
open this lcp with an editor
search any “False” and rename it to “True”
save it and you have a perfect raw - lensprofile
Ok, but what does it mean rename and correct the content of the lcp file?
It remains a profile created from jpg source, CameraRaw could consider it like a raw lens profile but it has no more value than a jpg profile, I believe...
Anyway, for whatelse it could be useful your suggestion to modify lcp file?
Thank you for your attention

The lens profile creator program is not installed on my pc (windows 7 - 32 bits)

After downloading the Adobe Lens Profile Creator and decompress, creates the folder: Adobe Lens Profile Creator 1.0
Inside the folder are the following files:
calibration charts
documentation
sample images
Adobe Lens Profile Creator.exe
cv100.dll
cxcore100.dll
libifcoremd.dll
libifportmd.dll
libmmd.dll
So, I double click the file: Adobe Lens Profile Creator.exe
The following message appears:
Error at loading of ippSP library
No DLLs were found in the Waterfall procedure

Try working through TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues to start with.
Otherwise, for general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Does the Lens Profile Creator work with Photoshop Elements 8.0..?

Similar Messages

Maybe you are looking for