Does the Livecache SID always have to be LCA ?

We have installed APO Livecache with SID other than LCA and I'm being told that it has to be LCA always ?
Is this true ?
If it is, why is the install tool gives the option to pick a SID ?
Or is there a config setting in SAP to change this default setting ?
Thank you

Hello Ravi,
Please check the SAP Note No. 829963.
Please review the documents at service.sap.com/scm ->mySAP SCM Technology:
"mySAP SCM Technology" & "liveCache overview " .
In case of a new installation of the liveCache/LCA, you have to create the connections LCA/LDA/LEA
as described in the installation documentation for the SAP liveCache technology - using
Transaction LC10. For example, review the document at
service.sap.com/instguides -> mySAP Business Suite Applications->
mySAP SCM -> Using SAP SCM 5.0 Server->
"Installation - SAP liveCache Technology " in the section
"Common Post-Installation Activities" - "Setting Up the Connection to the liveCache Instance".
Please review the information at service.sap.com/liveCache ->Release Information ->
   SAP LC/LCAPPS 5.0
You could run /n/sapapo/om13 -> checks & see the status for LCA & LDA & LEA
connections. If the connection is marked by the red semaphore => check errors in /nsm21.
You could run the test connection for LCA & LDA & LEA in db59 transaction and review the results.
Please open the OSS ticket to the component 'BC-DB-LVC' or 'BC-DB-LCA' if you have further
questions on this issue.
Thank you and best regards, Natalia Khlopina

Similar Messages

Does the entire query always have to execute?

We have a large (100 line) query that is used for detecting bad data. The query looks like
select * from table where
clause1 is true -- for example, start_date is null
OR clause2 is true -- end_date is null
OR clause3 is true -- start_year < 1970
. 100 more clauses
It looks to me like every clause is being evaluated for every row even though the first clause that evaluates to true is enough to select the row. I believe every clause is being evaluated because we often get failures from the toDate() function for columns that are null and there are null checks before the toDate() call.
Is it possible to make the query evaluation end "early"?
Thanks for any help or advice,
-=beeky

Hi,
As Justin said, Oracle will quit evaluating your WHERE clause as soon as it finds a condition that is TRUE. If you have evidence that it is evaluating some condition even though an earlier condition is TRUE, then it must be evaluating the conditions in a different order. Make sure you have up-to-date statistics and appropriate indexes, so the optimizer can make an intelligent choice about which conditions to evaluate first.
You can force the order by putting the conditions in a CASE statement.
For example, say you're now doing this:
select *
from    table_x
where   start_date is null
   OR   end_date is null
   OR   start_year < 1970
;If you know that the third condition (start_year < 1970) is the most restrictive, and therefore you want to make sure it is done first, then you can re-write the query like this:
select *
from    table_x
where   CASE
            WHEN start_year < 1970   THEN 1
            WHEN start_date is null THEN 1
            WHEN end_date is null    THEN 1
                                      ELSE 0
        END = 1
;

Does the Class Word always have to be the last word in column name? What about Units?

Sometimes we are required to store both a US and a metric column in the same table. Is it ok to use the unit type as a suffix to the class word like AreaSqMi and AreaSqkm in the case of watersheds which cross both the US and Canadian borders?
Before everyone jumps on me let me explain. The software environment we are using is from ESRI's (Geographic Information System) for displaying maps. The popups for displaying attribute data can only display existing columns so no derived columns.

Use columns standarts
http://www.codeproject.com/Articles/22947/A-Naming-Scheme-for-Database-Tables-and-Fields
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Why does the top button always brake why as my screen decided to pop off why is the back of my case bending when I have never dropped it why dose this shity phone keep sending text messages as picture messages this is the worst phone av ever had!!

Why does the top button always brake why as my screen decided to pop off why is the back of my case bending when I have never dropped it why dose this shity phone keep sending text messages as picture messages this is the worst phone av ever had!!

I know a lot of people with iphone 5 and have never heard them complain about top button always brake and screen that decides to pop off or the back of their case is bending.
That sounds like a phone that has been dropped a numerous times.

Does the 2012 Mac Pro have 2 CPU socket always? If I buy one CPU setup, can I upgrade it later to 2 CPU?

Does the 2012 Mac Pro have 2 CPU socket always? If I buy one CPU setup, can I upgrade it later to 2 CPU?

If money is no object, OWC will swap 2010 or 2012 Processor shelves for whatever you want as long as you have a working Mac Pro 5,1 shelf to swap and a ton of money.
http://eshop.macsales.com/shop/turnkey/MacPro/2010_Xeon_Processor
The basic charge is US$949 starting from the 2.8 Quad.
• to move up to the 3.33 hex add US$550 to the base price for a total of about US$1500.
• to move to dual Quads or dual hex ADD $1470 to $4250 to the base price.

Does the magic mouse not have the feature of viewing all open pages on desktop like you do when you use the side buttons of the wired mouse?

Does the magic mouse not have the feature of viewing all open pages on the desktop like you do when you use the side buttons of the wired mouse?

No, you'll have to use Mission control for that. It's either located on the dock, the F3 key on recent laptops on a swipe on the trackpad.
Regards,
Captfred

HT2486 birthday are not saving in my contacts? What am I doing wrong. I always have put in birthday before with no problems

Birthday are not saving in some of my contacts? What am I doing wrong. I always have put in birthday before with no problems. Some contacts it works and others do not? help me.

Arnis and Jeff,
Thank you both very much for your assistance. I was able to figure out why the Adobe Application Manager kept failing on installing the patches. Idiot me didn't unzip them first. Once I unzipped the patch files, the installer worked fine. Both patches are now successfully installed; my FM version is now 12.0.2..
To answer some of your questions:
Yes, I have administrator privileges on my PC.
Yes, I had all of the files in the book opened when I generated and/or updated the LOR file. So that was not the issue.
With the patches installed, I opened a book and all of its files. I updated the LOR and all works fine – it gives me all of the Imported Graphic references. So there must have been an issue with that release of FM12 (12.0.0.329), which was fixed with the patches.
Again, thank you both for your help!
Best regards,
Beverly

How much ram does the iPhone 6 Plus have?

How much ram does the iPhone 6 Plus have?

This is what I got on the info....
IPhone’s RAM has been very little, even pitiful compared to other flagships. Now 1GB RAM is still the standard configuration for the current iPhone 5 / 5s and iPhone 6.
Is Apple’s system optimization can really never need to increase the memory capacity? Obviously the answer is no. Recently, GSMArena published a sheet of iPhone 6 Plus detailed specifications, we can clearly see the “2GB RAM” in the memory list.
GSMArena also posted the benchmark score for iPhone 6 yesterday, but we seen that A8 GPU not seem to improve a lot in the processing capability compared to A7 – only increased 4.65%.
Apple usually not declare the detailed hardware parameters of their products, because those indicators not have too many advantages compared to other similar products, and even looks a bit shabby. But for Apple, these are not the most important, the company always focusing on the overall performance and user experience of the product. iPhone 6 Plus is the largest ever. Apple has said the iPhone 6 Plus screen reached 1080P in the event, as a larger screen means more resource consumption, and the processor needs to handle higher pixel image, so increasing RAM is the best choice to enhance stability and performance.
So based on the above evidence and our speculate, iPhone 6 is indeed possible with 2GB RAM. If in doubt, all we could wait is finding out the truth after dismantling the device. Course this just may be a beginning, we also expect Apple can give more memory for the upcoming next-generation iPad and iPad Mini.

Why does the snmpcoll process always start up even if SNMP Statistics Collection is turned off?

Why does the snmpcoll process always start up even if SNMP
Statistics Collection is turned off?
<P>
The SNMP Statistics Collection field on the Server Status|SNMP
Subagent Configuration form affects only the SNMP subagent, which is a separate entity from
the collector process (snmpcoll). Currently, snmpcoll does not look
at the SNMP configuration data when it starts up. It is started by
the dispatcher and terminates when the dispatcher terminates. Many
of the statistics are supposed to reflect cumulative values recorded since MTA
initialization, such as the total number of messages sent and received.
As a convenience, the collector process collects information in the
background even while the SNMP subagent is turned off; this way,
the values are available when the SNMP subagent is configured and
turned on.

Collections fall off on the Date of First Deliquency 7-7.5 years later; that is supposed to be reported as the first time you went late (1-30 days) on the OC (original creditor) in the chain of events leading up to it's being farmed out for collection as I underestand it. DOFD though sometimes doesn't get reported right, and by default it will be the date the collection is added to the bureaus. As an example I have an awkward collection (not sure how I got it looking at the payment history thought I'd cancelled that account but TWC billing apparently didn't think so) which I went late on in 2009, but didn't get farmed out till late 2010. The DOFD is 6/09 looking at it, and it's expected to come off according to the bureaus 6/16 as a result. Different negatives have their own rules though.

Why does the iphone 5 always display the wrong time

why does the iphone 5 always display the wrong time

I had similar problem. My iPhone was always about 3 minutes faster than the correct time here in the UK which I found to be very irritating. It just came to a head because here in the UK we have just changed from British Summer Time back to standard GMT. This actually worked automatically except that the iPhone time still showed it to be about 3 minutes faster than GMT. However I have now cured the problem (almost) by going to
Settings/General/ Date & Time/ and then selected the "Set Automatically" button.
The clock then immediately jumped back 3 minutes and now the iPhone time is only about 10 seconds slow which is good enough for me.

Why does the App Store always crash

Why does the app store always crash when I go to use the app genius on my ipod touch, it does it everytime. It even does it ocasionaly when I search for apps. Whats going on Apple. Please look into this or tell me how to turn genius off if thats what is causing the crashes, I can't find how to turn it off in the settings.

The most usual explanation would be that you need to update or you have to many things taking up your memory

Does the iPad mini GSM have LTE

does the iPad mini GSM have LTE, i have one, got 4G sim card, but, never worked, always shows 3G

Yes. See:
http://support.apple.com/kb/SP661
Scroll down to "Wireless and Cellular"
Are you in the US or another country? I believe LTE is not available outside of North America. See:
http://appleinsider.com/articles/12/03/08/new_ipad_4g_lte_incompatible_with_netw orks_outside_north_america

Does The iPhone 4 Still Have The Reception Issue

hey guys i wanna know does the iphone 4 still have the "Death Grip" which is the reception issue (antenna issue) with iphone 4 when u hold ur hand (or fingers) near the antennas and the reception goes down to like 1 bar (n sometimes makes it go to no service).
i think someone said they have made newer models of the iphone 4 what have fixed it but i am not 100% sure
have they fixed it if i buy an iphone 4 now or does it still have the reception issue
here is what it is if u dont know what the reception issue is : http://www.youtube.com/watch?v=-ixIHyEPO5g

My blackberry still has the reception / antenna issue. And always has. In fact, it is so bad that I can terminate the connection if I hold the phone with my head and shoulder.
My iPhone 4 (not s) on the other hand has never been a problem for me.
A lot of noise—not much benefit. However Apple did apply new engineering to the problem—which is great!
-Alan

HT201956 Why does the right side of the menu bar disappear or blink when I turn on my epson XP200 printer?

Why does the right side the menu bar disappear or blink when I turn on my epson XP 200 printer?

I have also been experiencing the same problems. Mac user since 1991. I own various machines but this particular problem lies with a MacBook Pro 2008 using 10.5.4
The laptop has two users. One is fine while one is not. A new user was created but upon logging in for the first time the right hand side of the menu bar blinked off and on just like the existing user. No hard drives have been connected. All files backed up via drag and drop wirelessly.
Since this development I have been unable to get to my iDisk; it might be related or coincidental. Last night I re-entered my .mac/MobileMe account details whereupon I was presented with a message saying the machine had not synced before. Not true. It had been syncing automatically since the day of purchase March 2008. I wonder if there is a connection between somewhere deep down in the Library, updated versions for 10.5.4 and MobileMe. Somewhere along the line a combination of events triggered the tool bar to start blinking...
It's strange how one user is fine (seldom used and DOES NOT have a MobileMe account) while the main one, me, is not fine (used heavily throughout the day and DOES have an active MobileMe account).
At this point, I don't intend to re-install and start all over again (I've done this so many times with other machines over the years that I was hoping those days had finally gone based upon Apple's brilliant recent advancements).
Any help or comments will be welcome.
Cheers!

HT1365 Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

The figures you mention only make sense on your intranet. Are you still using the same wireless router. The verizon one is somewhat limited as far as max wireless-n performace. For one thing it only has a 2.4 radio. I like many people who wanted wireless-n performance before they even added a wireless-n gigabit router, have my own handling my wireless-n network.

Does the Livecache SID always have to be LCA ?

Similar Messages

Maybe you are looking for