Does the LV F3 Patch cover the LV Real Time f2 patch?

Does the LV 2009 f3 patch patch also include the fixes from LVRT2009f2Patch ? (I'm assuming the two f2 patches are different)
The following is from the download page for the LV 2009 f3:
"The LabVIEW 2009 f3 patch includes all of the fixes of the LabVIEW 2009 f2 patch."

Hi jjsutc,
You are correct that the two f2 patches are different. The LabVIEW 2009 f3 Patch does not include the fixes from the LabVIEW Real-Time 2009 f2 Patch.
Thank you for choosing National Instruments.
Aaron P
National Instruments
Applications Engineer
http://www.ni.com/support

Similar Messages

My screen cracked, but I haven't had my macbook for a full year yet. Does Apple care or warranty cover the costs of the damage?

My screen cracked, does apple care or warrant cover the costs?

Yes, unless the damage occurred due to an accident. In other words the warranty is applicable only if the crack occurred due to a manufacturing defect.

TS1713 Does my 1-year warranty cover the replacement of a damaged Magsafe adaptor?

The cord on my 85W Magsafe adaptor has been damaged. Does my 1-year warranty cover the replacement of the adaptor?

The cord directly connected to the adaptor was starting to rip off, and so my mother used electrical tape to fix it. The tape ended up melting, somehow causing the cord to rip off, but not completely. The charger works to an extent - it's very on and off. However, I still would like to replace it for a new one. Will I still be able to replace it? With warranty covering it?

Is there a protective travel case for the iPad2 that will cover the smart cover as well?

Is there a protective travel case for the iPad2 that will cover the smart cover as well?

There are a variety of well-made sleeves from SF Bags which will accommodate the Smart Cover. I'm partial to the neoprene bags and sleeves from Bult NY and I use this "hoodie" netbook sleeve (in black) for extra protection when I'm traveling or in the field because it has a rigid shell to protect the back and sides:
http://www.builtny.com/hoodie-netbook-case-7-10-inches-prod.html
For everyday, I slip my iPad, with the SmartCover on, into a small neoprene messenger bag, whose 6 pockets hold my iPad, a wireless keyboard (in a sleeve from SF Bags), Kindle, iPad, and cables /chargers:
http://www.builtny.com/neoprene-messenger-bag-11-13-inches-prod.html

The use of restricted key figures in real time scenario

Hi all,
Please let me know the use of restricted key figures in real-time business scenarios....plz someone explain it with <b><u>example</u></b>...
Also, can restricted keys be defined globally with same infoprovider...???????????
Your response is thankfully acknowledged,
thanks and regards,
shalini.

Hi,
You can restrict the key figures of an InfoProvider for reuse by selecting one of more characteristics. The key figures that are restricted by one or more characteristic selections can be basic key figures, calculated key figures or key figures that are already restricted. Which means you can define and use them globally in reporting for a particular infoprovider.
Example:
You have to show the sales for different product typessay 1, 2, 3, 4, 5, 6, for a company code.
now you can define a RKF with company code and sales keyfigure.
In the report, in columns, you use this RKF in new selection and restrict it with product type in 6 diff columns.
New Selection.
Restrict it with RKF
Restrict it with product type 1.
similarly for others..
Hope this helps you....

Does the payment processing fee cover the previous...

Quick question with my ongoing argument about the payment processing fees. Does this charge cover the previous three months or the next three months? IE My charge was dated 18th October when my bill was generated, so does this cover October - January, or is this to cover the period of July - September. If it's the latter then the £5.40 needs refunding because it's covering the three months when I was still paying the direct debit, this was only cancelled a couple of days before the bill was generated, after BT had received all three direct debits for that billing period. It just says 18th October, but it's on the bill for July - October so I'm wondering if it's backdated as Craig told me in an email this morning it's automated, in which case it needs refunding from the bill.
Contact The Mods
Use Live Chat to speak to an advisor
Charges for cancelling your contract early

HI you will need to ask Craig about the refund
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Expand the Background Image to Cover the Entire Region Title

I have a region title that contains an image and it has a height of 2 rows but the background image (blue image) is not expanding in the area (the css contains repeat for the background). The application uses theme 2. Can someone help?
CSS:
.rc-title {
    background: url("../images/bg-region-blue-l.gif") repeat scroll 0 0 transparent;
    float: left;
    width: 100%;
div.rc-blue-top
    background: url("../images/bg-region-blue-l.gif") repeat scroll 0 0 transparent;
    float: left;
    width: 100%;
}I created the application on APEX.ORACLE.COM:
Workspace: RGWORK
User: TESTER
Password: test123
Application : CSRSR (33558)
Select Signage from the menu (only choice).
You will see that one of the tabular forms has Nameplates and an image, another tablular form has an image but no text (Nameplates) even though it is there. I would live the blue to cover both the image and the text.
Please help
DB: 10g
APEX 4.1
APEX 4.2 (APEX.ORACLE.COM) works the same way.
Robert
http://apexjscss.blogspot.com

sect55 wrote:
fac586 ,
I would like to try the second option:
>
Another option would be to eliminate the problem by moving the nameplate images out of the region titles. There's horizontal space within the regions that will allow these images to be positioned to the left of the tabular forms, which would look OK.
But how do I reference the horizontal space within the regions? I looked at the template for the region:
<div class="rounded-corner-region float-left-100pct" id="#REGION_STATIC_ID#" #REGION_ATTRIBUTES#>
<div class="rc-blue-top"><div class="rc-blue-top-r">
<div class="rc-title">#TITLE#</div>
<div class="rc-buttons">#CLOSE##PREVIOUS##NEXT##DELETE##EDIT##CHANGE##CREATE##CREATE2##EXPAND##COPY##HELP#</div>
</div></div>
<div class="rc-body"><div class="rc-body-r"><div class="rc-content-main">#BODY#<br />
</div></div></div>
<div class="rc-bottom"><div class="rc-bottom-r"></div></div>
</div>and couldn't find out to put the image in the horizontal space.
Can you please help me by providing the details? There are two options, depending on the role you see the nameplate images playing on the page. I've used the two regions to provide one example of each.
*1. Nameplate as eye-candy:* If there's sufficient information in the region title, region content and item labels to make the nameplate images superfluous in providing information to the user, and you're just using them to improve the appearance of the page, then they can be applied purely using CSS.
/* Nameplate image as CSS eye-candy */
#nameplates-ndc div[id$="catch"] {
min-height: 36px;
padding-left: 113px;
background: transparent url(#WORKSPACE_IMAGES#nameplate_ndc.gif) top left no-repeat;
background-size: 103px;
}Note the use of the CSS3 <tt>background-size</tt> property to resize the image. If the app has to run in browsers that don't support this then you'll have to drop it and create an image of the exact size required for use in the <tt>background</tt> rule.
*2. Nameplate as content:* If the nameplate images are necessary to provide information to the user, then they have to be included in the region (and they must have an <tt>alt</tt> attribute providing an alternative representation of the information contained in the image).
Put the image in the region Header:
<img src="#APP_IMAGES#nameplate_n.gif" width="103" alt="Nameplate (name only)" />and float it so it sits alongside the form:
/* Nameplate image as page content */
#nameplates-name .rc-content-main img {
float: left;
margin-right: 10px;
}

Can anyone provide me the suitable material for labview fpga &labview real time??

Message Edited by Sithu on 05-27-2008 04:32 AM

The following link includes training material for both LabVIEW Real-time and LabVIEW FPGA.
http://zone.ni.com/devzone/cda/tut/p/id/6929
If you are new to LabVIEW you should start from the LabVIEW Basics material available at the following link.
http://cnx.org/content/col10241/latest/
KostasB
NIUK Applications Engineering

Did they change the inventory system to have it show real time counts now?

I ask because before it used to be that it took a store having THREE or more copies of a game or other item before they would show up as available via the website. Of course, if you looked something up using the kiosks IN store it would show most times even if it was less than three.
I just ask because I bought a copy of Deadpool for the PS3 on Sunday and it showed as IN stock even though they only seemed to have ONE copy. By the time I got home and double checked it showed '3-5 days' for in store pickup for that same game.
Just kind of curious since if they did improve the system this is a GREAT thing.

Hi CheapestGamer,
Great question about our inventory system! I always check and make sure the item I want is available before I go into the store so I don’t leave disappointed I didn’t get what that I wanted because it was sold out.
I know that we are continuously striving to improve our systems and make them better, faster, stronger. Just recently in fact, we rolled out a new register system to the stores full of numerous improvements and upgrades. With that said, I too have noticed the system updating more quickly, and have seen exactly what you described in your post.
Thanks for noticing our hard work, hopefully we can continue to impress!

'Read JPEG File.vi' does not seem to work on PXI with real-time OS

I am trying to read a jpeg file on a PXI system with LabVIEW real-time on it. To test I created a very simple VI (attached) with only 4 objects: 'Path' --> 'Read JPEG File.vi' --> 'Draw Flattened Pixmap.vi' --> 'Picture'.
This VI works fine on my Windows XP host machine, but it does not work on the PXI system. The error code 1 occurs in 'Read JPEG File.vi'.
The jpeg picture is in the same directory as the VI. I don't think I got the path or filename wrong because if I change the file or path name I get another error: 7: 'File/Directory Info in Check Path.vi->Read JPEG File.vi->test.vi'.
Maybe reading jpeg files is not supported on realtime systems? I could not find anything about it. Sol
utions or workarounds are of course welcome!
Attachments:
Test_Read_JPEG.vi ‏23 KB

'Read JPEG File.vi' is not supported on LabVIEW RT. I believe it has to do with special functions or libraries need to be called due to the JPEG image type. Instead you can use a Bitmap and the 'Read BMP File.vi', which I believe is completely implemented in G code.
Keep in mind that the RT System doesn't really have a front panel and that the front panel is only 'available' when LabVIEW is connected to the target such as being targeted or having a remote panel to it. Generally, a deployed RT system doesn't have a UI and just communicates to a Host VI which acts as the UI. Having said that, the BMP file worked when I tested.
Regards,
JR A.

Real Time Kernel patch

Hi,
Has anyone tried to add the realtime kernel patch to an existing arch installation?
Can anyone provide home help ?
I want to add the RT patch so i can use some Real Time Java implementations on arch

As you can see, a bit of googling would have solved your problems. Now, please go read the wiki on custom kernels and the AUR before asking questions about how to use those.

I am doing browser testing for the different firefox versions. Shall I use only the latest version to cover the lower versions?

I heard that if i test using the latest firefox version which is 32, it would be sufficient and I do not need to test the older versions e.g., 26, 27, 28, 29, 30, 31.
Is that a correct assumption?

You may want to test with the Firefox 24 ESR and Firefox 31 ESR version as those are still supported with security updates.
Firefox 24.8.0 and 31.1.0 ESR:
*https://www.mozilla.org/en-US/firefox/organizations/all.html
*https://www.mozilla.org/en-US/firefox/24.8.0/releasenotes/
*https://www.mozilla.org/en-US/firefox/31.1.0/releasenotes/

Does AppleCare Part #MC253LL/B Cover the iPhone 4s

I purchased this a few months ago and its no longer sold, and wanted to make sure it was compatible with the iPhone 4s before opening it.
Thanks!

Call AppleCare & ask. That's the old version for the iPhone 4, before the 4S was released, but "should" work just fine as long as it has not been activated.

I bought my iPod from Walmart, my charger is broken, does the manufacturers warranty cover the charger? I need to replace it.

I need to know if the manufacturers warranty will cover the replacement of my charger. It's broken.

Yes, The Apple warranty covers the cable as well as the iPod. If defective, within warranty and not abused Apple will exchange it at no cost.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

How to repeat a background image to cover the height of the page?

Hi
I have a page with an image alinged to the top in a table and
I have a pattern in the background of the cell in the same table
I need that background of the cell to repeat it self along
the height of the page, so when someone views the page at a higher
resolution, the background image will repeat it self to cover the
extra space.
I've tried setting the height of the table to percentage, but
the table doesn't cover the height of the page.
I could also make the table really long so when viewed at
higher resolution there wont be any blank space at the bottom, but
this makes an unnecessary and long scroll when viewed at lower
resolution.
Someone told me to use css but i have now idea how to
implement that.

make sure you have set your page margins to 0 if you don't
want the default
margin top left. Cut and paste the following into the head of
your document
just before the closing </head> tag.
then if you want to repeat a background image in a cell, you
need to create
a rule to do this:
.cellback {
/*this repeats the image across the page horizontally*/
/* if you want to repeat down the page, then change to
repeat-y */
background: url(pics/whatever.gif) repeat-x;
you can combine this background image rule with the other
margin setting so
you have:
<style type="text/css">

</style>
You then apply to the class to your cell
<td clas="cellback">
Examples here:
http://www.dreamweaverresources.com/tutorials/pagebackgrounds/cellbackground.htm
this shows how to use a background image for your entire
page:
http://www.dreamweaverresources.com/tutorials/pagebackgrounds/examplehor.htm
Nadia
Adobe� Community Expert : Dreamweaver
http://www.csstemplates.com.au
- CSS Templates | Free Templates
http://www.perrelink.com.au
- Web Dev
http://www.DreamweaverResources.com
- Dropdown Menu Templates|Tutorials
http://www.adobe.com/devnet/dreamweaver/css.html
> I have a page with an image alinged to the top in a
table and I have a
> pattern
> in the background of the cell in the same table
> I need that background of the cell to repeat it self
along the height of
> the
> page, so when someone views the page at a higher
resolution, the
> background
> image will repeat it self to cover the extra space.

Does the LV F3 Patch cover the LV Real Time f2 patch?

Similar Messages

Maybe you are looking for