Does the M-audio iControl work with the newest version of Garageband (2013)

I'm looking for a dedicated controller for garageband. It seems that the m-audio icontrol was the only one ever made and was released in 2005. I've read it worked with all versions of GB up to '11. Would this 8 year old controller work with the newest version of garageband (newest version as of october 2013)? Or are there any new dedicated controllers that are an option.

Haven't checked all the options, but yes, M-Audio iControl works with Garageband 10.0.1 and with Logic Pro X (10.0.4).
I am astounded that a) they stopped making it b) no-one has stepped in to offer a similar (or better) hardware solution - especially as GB is now free.
If you can get one, grab it!

Similar Messages

  • I have interface M Audio firewire 400 new Mac Pro has firewire 800 Do you think an adaptor will provide the same quality? Will the M audio 400 work with lion and new system? Thanks so much

    I have interface M Audio  400 with 400 firewire new Mac Pro has firewire 800 Do you think an adaptor will provide the same quality? Will the M audio 400 work with lion and new system or do I need new software? Thanks so much

    If you have a little Firewire adaptor, everything should work fine. It does on my system.

  • Does the Apple A1096 adaptor work with the A1081 monitor? Can any one help? Thanks, Paul

    Does the Apple A1096 adaptor work with the A1081 monitor? Can any one help? Thanks, Paul

    Click on this link for the fix http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/

  • Does the plantronics marque m155 work with the iphone 4S?

    does the plantronics marque m155 work with the iphone 4S? can you use siri with the bluetooth headset

    http://www.apple.com/support/headset/

  • MBPro 17 Intel Core 2 Duo Audio only works with the headphones?

    MBPro 17 Intel Core 2 Duo Audio only works with the headphones?
    There is a red light constantly emitting from the headphone socket?
    I can not listen to sound unless headphones are plugged in - when taken out I get a red light and the volume controls kets seem locked?
    Please help!
    Julian

    Hi Kitty.
    Seems to be quite a popular problem. In another post, I posted the following.
    "The red light is the data signal that is transmitted if you plug in an Optical Audio device such as surround sound speakers. I had the same problem for a short while with my 17' MBP. Sound was working fine from my built in speakers but I plugged in some earphones to listen to something that I did not want the rest of the office to hear and after pulling the hearphones out, the optical signal (red light) was being transmitted. The switch Cessna is referring to is the switch that is triggered inside the port that tells OSX that earphones/optical audio device is plugged in and to shut down power to the built in speakers. When the device is un-plugged from that port, the switch should get triggered again and power up the built in speakers and disable the optical light signal. Perhaps there is the slightest defect on the earphones you are plugging in that are preventing it from triggering the switch when the earphones are un-plugged.
    Try a different sent of earphones to maybe trigger the switch if you are uncomfortable with the paper clip solution."
    That seemed to solve the problem for that user.
    The link to the post is http://discussions.apple.com/thread.jspa?threadID=895286&tstart=30
    Good luck

  • Does the PS3 Bluetooth Headset work with the IPod Touch 4Gen?

    Does the PS3 Bluetooth Headset work with the IPod Touch 4Gen?
    I really need to know. I have been trying to Pair them but it never shows up on the IPod. Anyone know the problem?

    Is it A2DP?
    The ipod touch does not support telephone headsets, just stereo headsets.
    http://support.apple.com/kb/HT3647

  • Will the old 23" ACD work with the Mini DisplayPort to Dual-Link DVI Adapte

    Will the old 23" ACD work with the Mini DisplayPort to Dual-Link DVI Adapter and the new MacBook Pro?
    Apple Store says it is for the 30" only.
    Thanks ... Ken

    I'm not so sure about that. I'd say the jury's still out until someone gets one and tries to use it single-link.

  • Will the motorola H620 Bluetooth work with the Iphone 5?

    Will the motorola H620 Bluetooth work with the Iphone 5?

    if it support any of the following bluetooth profiles
    http://support.apple.com/kb/HT3647?viewlocale=en_US&locale=en_US

  • I activated this week my Photoshop and Lightroom CC and noticed it is a dutch version but in the past I always worked with an english version. Can I change the dutch version for an english ? Thanks. Peter

    I activated this week my Photoshop and Lightroom CC and noticed it is a dutch version but in the past I always worked with an english version. Can I change the dutch version for an english ? Thanks. Peter

    Hi t Forograafken,
    You can check your Creative Cloud Application Preferences to see if 'Deutsch' is chosen.
    You can change the App language from here :
    Regards,
    Rave

  • When is the iphone map going work with the newest IOS

    Whe is the iphone map going work with the newest IOS?

    Sorry. This question doesn't make sense. It works just fine for me right now. Maybe you'd like to explain what your problem is...

  • Hey do you know if the wireless mouse pad works with the ipad 2?

    hey do you know if the wireless mouse pad works with the ipad 2?

    There is no mouse or cursor used with iOS devices.

  • Does Logic Pro X actually work with the Roland VS-20?

    Hi all.  According to the support docs, the Roland VS-20 should work with Logic Pro X.  I've installed the latest drivers, the latest Logic plug-in for the VS-20, and the latest VS-20 Editor.  On occasion (and I have no idea what the magic formula is), I've gotten the controls and audio to work via the VS-20.  However, more often than not, the VS-20 controls (transport controls and faders) do nothing, and playing audio results in a horrible screeching through the VS-20.
    A couple of other points of info:
    The VS-20 always shows up correctly in the Control Surface and audio settings of Logic Pro X.
    The VS-20 works fine in Reaper 4 as well as when only using the VS-20 Editor.
    I'm using Logic Pro X (10.0.3) on a 2012 MBPr w/ 2.6GHz i7 and 16GB RAM
    Is anyone out there using this setup successfully?
    Thanks!

    Roland was very helpful, even though their solution didn't actually work for me.  I sent them the same info as above, and here was the reply:
    We are sorry to hear that you are having trouble. The VS-20 is definitely compatible with Logic Pro X. Be sure that you have setup the VS-20 in Logic Pro X according to the following instructions:
    Audio I/O Setup:
    1.     Select Logic Pro X in the menu bar and navigate to Preferences.
    2.     Click on “Audio...”
    3.     Under the Devices tab, set your Output Device and Input Device to “VS-20 44.1kHz”--if it is not already set.
    Note: The sample rate of your Logic Pro X project must be 44.1kHz--as the VS-20 only operates in this sample rate.
    4.     Click “Apply Changes”.
    5.     Close the Preferences menu.
    Control Surface Setup:
    1.     Select Logic Pro in the menu bar and navigate to Preferences.
    2.     Navigate to Control Surfaces and then click on “Setup...” A Setup window will appear.
    3.     Click on “New” and then select “Install…” An Install window will appear.
    4.     Select “Mackie Designs (Manufacturer) / Mackie Control (Model) / Logic Control (Module) and then click “Add”.
    Note: If prompted with the message “No new Devices found”, click on “Add Manually”.
    5.     In the Setup window, expand the Mackie Control section and assign both the Out Port and Input Port to “CONTROL”.
    Note: If the Setup window does not appear, right-click on the Mackie mixer image and then select “Hide/Show Inspector”.
    6.     Close the Control Surface Install and Setup windows.
    The VS-20 is now setup for Logic Pro X.
    We hope this information is helpful! Please let us know if this does not resolve your issue and include as much information as possible regarding troubleshooting you have done and results you have received. We are happy to help you.
    Sincerely,
    Roland Product Support
    These steps actually resulted in a situation where some of the buttons on the VS-20 triggered sounds instead of their intended functions.  I deleted everything and started over, this time picking the actual VS-20 option in the setup, and everything worked.
    I should mention that I also (foolishly?) updated to Mavericks just before getting this to work. 

  • Does The Apple USB Modem Work With The Mac mini ??????

    Just wanted to know if anyone has successfully used the new Apple USB Modem with the Mac mini, is it compatable ????
    Thank you for your input on this.
    Mike D.

    It says it works with the Mac mini, but does it really? I just received my modem yesterday and could not get it to work with my 1.42 mini - the more expensive one that comes without a dialup modem! I looked carefully at the specs and it appears the Apple USB modem requires Mac OS 10.4.3, not the 10.4.2 that comes with the Mac mini.
    Talk about stupid! And the mini docs say it comes with the "latest" version of Tiger. Not! So I can download the upgrade, I guess. IF I could get on the internet! This is extremely annoying. I guess I'll have to download the upgrade on another computer and transfer it somehow. Boy, those Apple guys sure are tech geniuses, aren't they???
    [ Edited by Apple Discussions Moderator ]

  • Does the iPhone 3 charger work with the 4s?

    Hi! I just got he 4s for a gift.
    I was wondering if the the older Iphone charger works with this one?
    She has an iPhone 3 and has he car charger etc..
    thanks!
    Jim

    Should work just fine.

  • Does the iPod Universal Dock work with the Apple Component AV Cable?

    I have the iPod Universal Dock (MA045G/A) and the Apple Component AV Cable (MB128LL/B)...the ones in the original black packaging.
    I had wanted to connect either my Nano 3G or my iTouch 1G to my TV, but neither would work through the docking station with the AV cable. Both did work when I tried not using the dock and connected both the Nano and the iTouch directly into the AV Cable.
    My dock works great on my Computer, and I tried a second dock (same model) that I had into the TV with the AV cable and it still did not see the connection.
    Is my particular iPod Universal Dock NOT COMPATIBLE with this Apple Component AV Cable (or for that matter, the Composite AV Cable-MB129LL/B)?
    It's not a big deal since both do work with the AV cable by itself...it's just annoying I can't use the dock...

    Are you sure it is genuine Apple cable? If you bought it on eBay or non-authorized Apple dealer it probably isn't. If it is a genuine cable, it is defective, and should be returned.
    When a working genuine Apple A/V cable is plugged into iPhone, a popup appears asking if you want to enable the TV output. Since you are not getting this popup, your cable is bad.

Maybe you are looking for

  • Farmville problems

    I have a problem playing Farmville. I can load the game. No problem. Except I am missing my tree orchards. All I can see is dark green circles shown on the page where the orchards are. This happens on the English farm. On my other Farmville Home game

  • Wrong picture in message preview - z30

    hello  my problem is that my z30 show me the wrong whatsapp picture in the message preview. Can anyone help me ?

  • IPhoto slide shows and rotation

    Slide shows I have created in iPhoto 6.0.6 and synced to Apple TV have occasional images rotated 90 degrees from normal. They show fine within iPhoto previews, but give a different result on Apple TV. Any idea how I can resolve this?

  • Script Error at launch since recent upgrade to CS6 & features missing

    After many failed attempts at getting all of the programs in CS6 Design Premium installed, I was finally able to with the help of the "Installing" forum.  Unfortunately I am still having problems with InDesign.  When launching I still get the script

  • How to block the invoice ,if the GR qty is in QA stock

    HI all, how to block the invoice,if the GR stock is in QA tock? But i have maintianed quality control key wiht the parameter like ivoice block and maintained in the respective material master data, even though invoice is not blocking? plese tell me i