Does the Mac Operating System not work properly with Youtube?

I noticed that my Messages on youtube are instantly deleted when I comment on some peoples Youtube channels. I don't think its the person that owns the youtube channels doing it because it is deleted almost instantly after I log out. It's very odd and I don't think its youtube censoring my comment because I'm not cursing in the comment and I don't believe cursing is against the TOS on Youtube anyways.
Another thing I notice is that when I'm on a flash based chatroom that when someone I am talking to has left the chatroom it will still say they are in the chatroom until I click on my friendlist and than they turn red as if they are gone. It is very odd that I am noticing these strange bugs. However the chatroom thing could be a chatroom problem because it might do that on my Windows side which I never checked because I'm usually on that chatroom on my Mac side.

The Adobe flash version could be checked to see if the system is actually using
their latest version (see Adobe, not a third party prompt from elsewhere to get it)
as that may be dated or you may have a newer -and- older Flash, and if so,
the later one may not be in use. Within OS X you can choose the newer one.
http://helpx.adobe.com/flash-player.html
{see the links further down in the above linked page, should you have additional
Mac OS X problems with Flash player or issues in general with installing it}
Also, some of youtube can be run in HTML5 and depending on the author, should
be visible even without a Flash player installed. youtube is a google product and
they also have a help section for dealing with their content. And browser settings
may affect how things work. Depending on what browser you use, this varies.
Good luck & happy computing!

Similar Messages

Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8 it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?

I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8 it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?

You don't. Since you have an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store.
(71894)

My mac book pro fell of my desk, everything seems fine, but the dvd drive is not working properly, any suggestions

My mac book fell of my desk yesterday. All seems well, but I noticed today that the dvd drive is not working properly, it seems to want to keep ejecting the disk even when the disk is out, and it won't accept dvd's any more. Any suggestions o fellow apple users?

Back up EVERYTHING, then take it in to have them assess for any latent damage. Wouldn't want a similar "delayed reaction" from the hard disk drive, would we?

Hi, My iPhone 4s does not work properly with the sound.

Hi, My iPhone 4s does not work properly with the sound. It just ring. Any other app it doesn't make sound unless I have my headset or bluetooth. And it make me choose between "DOCK CONECTOR" or my "APPLE TV". Why? Or any sugestion plz

Hi M3MB3R,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Cheers,
Jeremy

My iphone 5 does not work properly with Ford Sync,

Hi, My iphone 5 does not work properly with Ford Sync, everytime I pair the phone, Ford sync navigation system freezes and does not work !
Can someone help.

Hi M3MB3R,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Cheers,
Jeremy

HT1203 i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

It is almost as if the program does not exist on my computer. If I search for it, the only thing that comes up is the installer. I cannot find it anywhere despite the fact I have installed it numerous times, uninstalled it and conducted a fresh install, and the Adobe website checks says that it is installed.

HT201407 The shake operation is not working on my iPhone, can anyone help me with it plz

The shake operation is not working on my iPhone, can anyone help me with it plz

All depnds what your using it for.. If it's an app, may be a delay in the app doing an update to be compaitible with iOS 6. If its for an Apple app, then you need to check the settings for that specific app.

Since the last update to iTunes 11.0.3 (42) the airplay connection is not working properly , keeping breaking up

since the last update to iTunes 11.0.3 (42) the airplay connection is not working properly , keeping breaking up, while the airplay works fine with my iPad and iPhone. Anyone has experienced the same? any fix available?

Hi Erdelestre,
Thanks for visiting Apple Support Communities!
See this article for some tips about troubleshooting AirPlay:
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
Troubleshooting performance issues with AirPlay or AirPlay Mirroring
If you are experiencing intermittent playback or significant network lag with AirPlay or AirPlay Mirroring, it could be due to a weak Wi-Fi connection, interference, or the distance between the Wi-Fi router and your iOS device, Apple TV or AirPort Express. Try the following suggestions:
Ensure that other devices are not trying to stream to the same Apple TV at the same time.
Turn off Bluetooth on your iOS device by tapping Settings > General > Bluetooth.
Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
If possible, try to locate your Wi-Fi router in the same room as your Apple TV and iPhone/iPad.
If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
If the Wi-Fi router has an external antenna, check to see that is it connected properly and in good condition.
Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
Best,
Jeremy

I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I cannot connect to the internet wirelessly. the wireless light has a fast green blinking light. how can I fix the router?

I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I am unable to connect to the internet wirelessly. The wireless light is blinking green very quickly and I connect and disconnect from the network constantly. How do I get the router to work properly

Hello James,
The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
Hope this helps,
Thanks
Vijay

Will lightroom cc run on the Mac operating system OSX 10.8 mountain lion?

will lightroom cc run on the Mac operating system OSX 10.8 mountain lion?

You haven't mentioned which version of Lightroom, but anything from 4 up should be no problem. Here's a link to the Lr5 requirements http://www.adobe.com/uk/products/photoshop-lightroom/tech-specs.html

HP computer will not work properly with an HP printer

I have the following two items that I am trying to use together:
- HP 23" TouchSmart Desktop, T6500 2.1GHz 4GB DDR3, 500GB HDD (Windows 7)
- HP OfficeJet 6500 Multi-Function Printer/Scanner/Fax
When I try to scan to Adobe Acrobat Professional 9.0, the document goes through the scanner, however the dialog box that I would expect (e.g. "Next Page" or "Done") never shows up. At this point, the system is unresponsive with respect to Adobe or the printer.
I suspect that it is waiting for the input from the dialog box that never showed up. I tried to move the other windows to see if the dialog opened in the background, however I am not able to select any of them (they remain frozen).
I contacted HP Support, only to have them tell me it must be the driver, and I have an "old" printer. (I did not realize that a 9 month old printer was considered "old"). I have tried all of the possible drivers that are available (original disk, downloads, other downloads from HP tech support), none of these resolves the problem.
In any case, they were unable to resolve the problem of having an HP computer work properly with an HP printer. (The printing function seems to work, just very slowly).
Has anyone else heard of this? Is there a resolution?

Update: I am still looking for a solution to this problem - the scanning portion of the Multi-function OfficeJet 6500 does not work properly with the HP TouchSmart computer.
I have not been able to find anyone in HP that can tell me when (or if) new drivers will be released for this printer.
I decided to investigate upgrading to a newer version of printer since HP told me the 9 month old printer I have was "obsolete", only to find that the identical printer is still on sale in many stores. Hmmm....
I feel like I am getting the run-around from HP.
I have since tried several more driver/software combinations, but every time I have the same problem (as described in the previous post).
If anyone has any ideas or suggestions, I would be most happy to hear them.
Thank you.

Help, web cam is not working properly with win vista

Hii.. my web cam is not working properly with win vista..even if the icon appears bt it does nt start.. its
lenovo easy capture 2.5...so if u cud suggest me anything...
Moderator note; subject edited

re-install drivers and try again. ( also easy capture )

Undo,redo not working properly with JPopupMenu

if i use JButton for undo ,redo it is working fine. but the same code is not
working properly if i add it in JPopupMenu.
what could be the problem.
thanks

what could be the problem.Your code is different or written incorrectly and since you didn't post any we can't help.
[url http://java.sun.com/docs/books/tutorial/uiswing/misc/action.html]How to Use Actions
If you need further help then you need to create a [url http://homepage1.nifty.com/algafield/sscce.html]Short, Self Contained, Compilable and Executable, Example Program that demonstrates the incorrect behaviour, because I can't guess exactly what you are doing based on the information provided.
And don't forget to use the [url http://forum.java.sun.com/help.jspa?sec=formatting]Code Formatting Tags so the code retains its original formatting.

My garage band will not work properly with new lion upgrade..HELP

My garage band will not work properly with new lion upgrade..HELP
I have tried to open old session i have done in garage band and many of the effects and instruments I have used will not show up. The system seems to have a bug.

If the graphical user interface looks broken, that is quite often a problem of corrupted user preferences - have you tried to remove the preferences file, as described in the FAQ
http://www.bulletsandbones.com/GB/FAQPages/OddBallProbs.html
Here is again the short version:
Quit GarageBand, if it is running.
Open your User Library in the Finder. It is hidden in MacOS X Lion, so use the Finder's "Go" menu:
Finder > GO hold down the "Options" key, until the library appears in the menu, select it.
In the window that opens, open the folder "Preferences" and remove the file:com.apple.garageband.plist and com.apple.garageband.plist.lockfile
Then try again to run GarageBand and download the loops.
The preferences file stores all you user settings that you set using the "Preferences" panel in GarageBand, also the layout of the GarageBand window and the location of your recent projects. You will have to enter these settings again after removing the file.
Regards
Léonie

Does the Mac Operating System not work properly with Youtube?

Similar Messages

Maybe you are looking for