Does the mini display to vga adapter work with a pc (win 7 64-bit)

Its not a thunderbolt adapter. its a mini display to vga adapter. my hp ency pc has a mini display port next to the hdmi port.

First make sure the mini-displayport is firmly seated.  They are a bit "sneaky" in that they look like they are fully in but aren't.
I assume that windows has something similar to the mac Displays system preferences.  So you need to check that and set if necessary the proper refresh rate and resolution for the projector.
how do i make it work or is it formated for macs only?
What's "it"?  The projector shouldn't care where it gets its vga signal from (when using the proper refresh rate and resolution).  The adapter is passive and just converts a digital mini-displayport signal to analog vga to pass over the cable (is the cable ok?).  That leaves your laptop.  I can't speak about it or its video card.  But I have to assume that if it supports mini-displayport it should follow the standards for mini-displayports.

Similar Messages

  • Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

    Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

    It's a VGA adapter. Nothing special about that. If your Samsung monitor supports VGA then it will work.
    But why not go completely digital and use a Mini DisplayPort to HDMI adapter to skip the analog conversion? It also supports passing audio over HDMI.
    About Mini DisplayPort to HDMI adapters

  • Is there a way to predict which video projectors will not work with the 2012 MacBook Air using the Mini-display to VGA adapter?

    I recently upgraded from a 2011 MBA to a 2012 MBA due to the larger capacity SSD.  The 2011 MBA running Lion and Mountain Lion worked with every video projector for lectures.  The new 2012 MBA is hit or miss with video projectors.  It is not an adapter problem.  I have multiple Apple mini-display to VGA adapters with the latest firmware.  They all work just fine with the 2011 MBA. Re-starting the 2012 MBA with the adapter and projector connected has not helped.   
    It it not acceptable to have a laptop that works with projectors some of the time.  Apple is aware of the problem.  Is the only choice to go back to the 2011 MBA? 
    RC 

    I installed 10.8.2 update today with my 2012 MBA.  The details of the update include:  Resolves a video issue with some VGA projectors when connected to certain Mac notebooks.
    I tried using the MBA with a video projector and it found the correct resolution and connected with the projector automatically.  Using detect displays in the disoplay preference pane wasn't even necessary. 
    I hope this is the fix I have been waiting for with the 2012 MBA.
    Thank you Apple.
    RC
              (http://support.apple.com/kb/HT5460)

  • Will a Mini-Displayport to VGA adapter work with new macbook pro 2011

    I was thinking of getting a mini-displayport to vga adapter for my external monitor I wanted to hook up but I wasnt quite sure whether it would work as my macbook pro has the new thunderbolt port, I was confused if the new port would only work with the thunderbolt displays. Could anyone help me as I'm not too sure what will work.

    I tried the Apple miniDisplayport to VGA in a Thunderbolt MBP and iMac and they both worked. Same for the Apple miniDIsplayport to DVI.

  • How to connect Macbook pro to a projector with the Mini Display to VGA adapter?

    When I connect them nothings happens, the display has a blue screenshot for a few seconds and then get back to the normal view of my desktop. It's the same if I digit "cmd+F2"... Please help me.

    The default method for adding a second display is called Mirroring. It uses a lowest-common-denominator approach to choosing display resolution, and often guesses wrong.
    System preferences > Displays > ( Arrange) and drag the superimposed representations of the two displays away from each other to invoke "Extended desktop" instead. Then you should be able to set the resolution for the projector to a more reasonable one, and your picture should appear.

  • Mini display port - vga only works with lid closed - then computer goes to sleep

    my problem is simple, but strange.
    I have a 2009 unibody macbook pro. I have 42 in lcd tv. I have a minidisplay to vga adapter and a vga cable. When I try to connect the monitor to the mbp when the lid is open nothing is detected. I do not get any options to change to mirror mode or am able to change any settings regarding the monitor. I can change the resolution of the built in display only. Now for the twist.
    If I connect everything, do a restart and close the lid, as the computer boots up the external monitor works. Its the grey boot screen with the apple logo. But as soon as the computer begins to load the desktop, the monitor losses the signal. At first I thought it was going into sleep mode, so I hooked up a usb mouse to keep the computer awake. I tried the process again, and as soon as it goes to the desktop it losses the signal. So I don't think it is sleep mode.
    I downloaded the minidisplay prot firmware update, but because the screen is not detected when the lid is open I cant run it. When the lid is closed the computer either goes to sleep or doesn't send the desktop signal and I still cant run it.
    Nothing happens if I change between the video cards (9400 and 9600gm). Is it a resolution issue? Do the vga cables have a max resolution that is lower than 1900 x 1200?
    What should I do? thanks
    2009 unibody intel macbook pro
    running 10.6.8
    3.06 ghz 8gb ram

    see all this time you DID have the info i was looking for:
    "Do the vga cables have a max resolution that is lower than 1900 x 1200?"
    3 posts later
    "The VGA displays Apple has typically in the past offered only had 1024 x 768 resolution at most."
    im sorry I inticed you to giving me the information i needed, but i guess it was required. you have earned your 10 points today.

  • Why won't any Mini DisplayPort to VGA adapter work with my 2012 13" MacBook Pro?

    Hello!
         A few month ago, I purchased a new 2012 13" MacBook Pro. I quickly realised that my non-Apple MDP to VGA adapter was not working, but put off the problem as it wasn't neccesary -- and I thught that the adapter was to blame. However, after using the adapter sold by Apple, I can asafely say that the problem is with my computer. In review on the product, several 2012 MacBook Pro users mention this. I was hoping someone here would be able to point me towards a solution! Thank you.

    I tried the Apple miniDisplayport to VGA in a Thunderbolt MBP and iMac and they both worked. Same for the Apple miniDIsplayport to DVI.

  • Mini Display to VGA adapter stopped. The Mini Display to HDMI is still working fine. How´s that possible?

    The mini display to VGA adapter had stopped, whinle the Mini Display to HDMI keeps working fine. The minid display to VGA adapter was replaced and the VGA cable as well, and the problem is the same. This test was made with two diferent monitors with VGA entries. How´s that possible to happen? Is that a configuration trouble in the MBP?

    The Apple´s customer support gave us the solution for this problem:
    SMC reset
    PRAM reset
    The VGA adapter return to work properly aflter this procedure.

  • Mini display to vga not working on 2010 Macbook Pro

    I'm trying to hook up my MBP to an external display but it kept showing "No Signal" on the external display. I have verified that the mini display to VGA adapter is working as I've tried it on a separate MBA and 13" unibody MB.
    I brought it down to the service centre and they've replaced the motherboard for me but it's still the same. I have also tried the SMC reset but to no avail.
    Help!

    This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

  • Mini Display to VGA adapter doesn't fit

    I have an older(2008) MacBook and the MIni display to VGA adapter I purchased doesn't fit my book. Is there one that I can buy that will fit?

    The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports.
    Here's the various types of Mini-DVI to VGA adapters on Amazon.com http://www.amazon.com/s/ref=nb_sb_ss_c_1_15?url=search-alias%3Delectronics&field -keywords=mini-dvi+to+vga&sprefix=mini-dvi+to+vga%2Caps%2C272

  • Will the mini display port to vga adapter work with a 2007 mac book?

    will the mini display port to vga adapter work with a 2007 mac book?

    I think your Macbook came with a Mini DVI port instead of a Mini Display port.

  • Cam I use Asus mini display to VGA adapter on mac with thunderbolt port

    I don't have a apple mini display to vga adapter, but my friend have a Asus branded with similar design like apple, I have a presentation two days more, so I need answer quick!!!
    My mac: 2012 mid 15 inch

    I mean the Mini Display to VGA as in this website:
    http://www.asus.com/support/FAQ/1002131/

  • Thunderbolt to vga (mini display to vga adapter)

    okay i got a macbook pro 2011 for christmas. i got the lg flatron 19'' w1942T and when i connect the them via mini display to vga adapter the external monitor goes into power save mode! and the mouse lags on the macbook screen...

    I mean the Mini Display to VGA as in this website:
    http://www.asus.com/support/FAQ/1002131/

  • Can the Mini DisplayPort to VGA Adapter for a 2011 Mac Mini be used with Windows 7?

    This question concerns the Mini DisplayPort to VGA Adapter described at the below link:
    http://store.apple.com/us/product/MB572Z/A
    When running Windows 7 via Boot Camp on a 2011 Mac Mini, can the above adapter be used with a VGA monitor?

    Thank you for the confirmation, Mr. Peck.

  • HT3492 What do I need to do to use the iMac as a monitor from my HP laptop? I have my HP connected to the Mini DisplayPort to VGA adapter which is plugged into a Thunderbolt port.

    What do I need to do to use the iMac as a monitor form my HP laptop?  I have my laptop connected to the Mini DisplayPort to VGA adapter which is plugged into a Thunderbolt port.

    vga may not be a compatible port
    https://discussions.apple.com/thread/2246912?start=0&tstart=0
    more hits
    https://www.google.dk/search?source=ig&hl=da&rlz=1G1TSEH_ENDK367&q=use+imac+as+m onitor+for+pc&oq=use+imac+as+mon&gs_l=igoogle.3.0.0l10.2417776.2420497.0.2421354 .15.11.0.2.2.0.316.1723.0j4j3j1.8.0...0.0...1ac.-OkFwmTKBg0

Maybe you are looking for