Does the MSI FM2-A55M-E33 work with AMD A10 6800K ?

So I am trying to build my own pc. I don't want my money to be wasted so asking you will it work ?
Do I need to update bios for that ?
I researched about it on the internet. It said that these fm2 boards (except the latest one) do not support richland series.They only support those trinity series. For richland, they need to update their bios. So do I need to do that for this thing? If yes, how do I do that ? Would the system turn on without those bios ? (asking because if it will turn on, then I could update bios from this website. But will it turn on without the bios?) I am totally confused. And also this is my first time building a pc. Please Help     

On some boards it is possible without (on some it won't even post). The board will then post but show a message about a non supported Richland cpu being used and that an update is required (board will be stuck in such message loop).
Now one can take a bootable DOS USB stick and put the bios update .exe on it you extracted from this archive: http://www.msi.com/service/download/bios-22557.html
Then enter the bios, go to save and exit and select your USB stick in the boot override section. The system will now boot from the USB stick and you're able to run the .exe
Remember: Go to save and exit and at the boot override choose the bootable USB stick. This will exit the bios and the system will boot from the device you selected. Otherwise you will get back to the message loop.
If the board doesn't post this trick is not possible. Either you need a trinity cpu then to update to a Richland supporting bios or ask MSI/a pc-shop to flash it

Similar Messages

  • Msi fm2 a55m e33 build problem

    Recently I helped a friend build a rig.
    The setup as follows:
    Case: cooler master elite 344 with usb 3.0
    Mobo: msi fm2 a55m e33 / amd a6 6400k richland processor
    Os: Windows 7 home premium 64-bit
    The problem after I built finish, my friend complained of no sound.
    I got her to download and install the latest system and chipset drivers but didn't help.
    Got her to download and install the latest sound drivers from the msi driver page but still didn't help.
    So I told her to check the case and she told me that there is a small black speaker that I didn't connect to the board. So I told her to connect it to jfp2 according to user manual. Still didn't work. I suppose that speaker is meant for the beep.
    As far as I know about the audio aspect of the cm case, it has a hd audio and an ac 97 plug connected together into one single plug. Tried both on jaud1 but still failed.
    Not exactly sure where the fault came from.

     

  • Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

    Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

    If the Belkin supports the A2DP (Stereo Bluetooth) profile then it will work.

  • How well does the wireless "Wild Charge" pad work with the iPhone?

    how well does the wireless "Wild Charge" pad work with the iPhone?

    I have tried similar things, and no, it has not become corrupted. So it should be fine

  • Does the Pocket Projector by Brookstone work with the iphone 5?

    Does the Pocket Projector by Brookstone work with the iphone 5 ?

    I have the Brookstone DLP Pico projector. I purchased it from EBay not too long ago. It worked before with the previous version of Apples iOS. I would view netflix, youtube, and videos.. I have an iphone4.
    Now with the latest update to ios7, tried it last evening with netflix and youtube, it does not work at all! This is rediculous, restricting access to something we had access to before

  • Does the hp mini wireless mouse work with a mac?

    Does the hp mini wireless mouse work with a mac?

    The only one that will work with OSX is the one you order with the Mac Pro from Apple. The others don't have the correct firmware for OSX.
    I've also noticed that the online store lets have an option for the QuadroFX 5800 to purchase with a Mac Pro
    No, it's the NVIDIA Quadro FX 5600. That is the only way to get it. NVIDIA does not sell it directly.

  • HT4101 Does the Ipad camera connection  kit work with the Ipad 4 and if not is there an adapter?

    Does the IPad camera connection kit work with the Ipad 4 and /or is the an adapter ?

    You want the newer Lightning to USB Camera Adaptor.
    http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter
    The old Camera Connection Kit also works and I use it on my iPad 4, however, to use this your will need the Lightning to 30 pin adaptor.
    http://store.apple.com/us/product/MD824ZM/A/lightning-to-30-pin-adapter-02-m

  • Why does the color red change from working with images in develop to library?  The color gets lighter and nothing shows a change on histogram but visually you can see it.

    Why does the color red change from working with images in develop to library?  The color gets lighter and nothing shows a change on histogram but visually you can see it.

    That's probably a broken display profile. The conversion from Library's Adobe RGB is different than the conversion from Develop's linear ProPhoto, so if there's a problem with the display profile it can show up this way.
    Recalibrate, or if you don't have a calibrator use sRGB. If your monitor is a wide gamut model use Adobe RGB.
    Assuming Windows, change it in Control Panel > Color Management > Devices, and relaunch Lightroom so that it can pick up the new profile at startup:

  • Does the Apple USB tp modem work with Maverick?

    Does the Apple USB tp modem work with Maverick?
    If not, what tp modems do work with Maverick?

    Important: The Apple USB modem is not supported with OS X Lion or later.
    http://support.apple.com/kb/HT3152?viewlocale=en_US&locale=en_US

  • Does the Palm Pilot Modem (10201U) work with the IIIc or IIIxe?

    Does the Palm Pilot Modem (10201U) work with the IIIC or IIIxe? On the box, it just says the III.
    Thanks!
    Post relates to: Centro (Sprint)

    I believe I used the Palm Modem successfully with my IIIc.
    Updating the OS on the device to 4.1 really helped a lot!
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Does the new version of lightroom work with an old CS5 photoshop?

    Does the new version of Lightroom work with an old CS5 photoshop?

    Yes - they will work together.
    However, the Camera Raw versions will not match - meaning you may have to render your file into a tiff to bake-in your LR Settings before passing the file to PS CS5,

  • Problem in MSI FM2 A55M-E33 with sapphire R9 270x

    Hi, I'm using A55M-E33 mobo with HD6670, I recently bought R9 270x, Before I bought it I checked diligently if it was compatible with the motherboard mentioned in the title, and it was listed as compatible.The gpu does indeed seat perfectly on the PCI-E slot but ONLY if I have the sata 1 and sata 2 cables disconnected from the motherboard.Is there any way to connect SATA cables ? I'm feeling unlucky  Help me

    you mean the card doesn't physically fit?
    and interfere with sata ports/cables?
    if so you can try to install angled sata cables instead, like those:

  • Does the BT Home Hub 3 work with other ISP

    Is the HomeHub desiged to only work with BT? Because I tried setting up the HomeHub with another provider called green bee and the broadband light was a constant red is there a way around this?

    It's locked to BT
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Does the Zen Micro Charger also work with the Zen Nee

    I can get a Zen Micro Charger for 20$ at my local Walmart, which is obviously better than the 35$ price online. But the main question is, will it work with my Neeon? Can it cause any sort of problems plugged into my neeon?

    USB adapters seem to be a law unto themselves. I have three, two for mobile phones, and one for the Micro. With the firmware update all three adapters work with the Micro, but the mobile phones will only work with their respecti've adapters.
    I'm not sure whether the Neeon is as straightforward as the Micro, so unless someone else has tried it you take a risk. I guess you can always buy and take it back if it doesn't work.

  • Does the newest version of keynote work with SnowLeopard?

    I have Keynote version 2.0.2 and it apparently does not work with version 10.6.8 of the Mac OS.  What do i do?

    If Keynote doesn't work for you on 10.6.8, then you have a problem with your Mac because it works for me on both my MBP and my Mac Pro. You need to start troubleshooting your problem to fix it.
    Allan

Maybe you are looking for

  • SharePoint 2013 Search Display Template People Search Mobile Phone

    Hello, I'd like to customize the people search result page. I already added some custom profile properties without any problem. But, when adding the MobilePhone field nothing is display. I've created a new display template based on the "Item_Person.h

  • Pro's and Con's of XI..

    Hi, I would like to know what are the key capabilities and limitations of SAP XI. Thanks...

  • PAPI connection to enterprise server

    I have deployed a simple BPM process to the enterprise standalone server. The process receives input from a global automatic and then it has an interactive activity which has been made external. However when I write a PAPI client following is the pro

  • Unable navigate between 2 active calls on 7931G

    Hello , I have a problem with ip phone 7931G . I'm unable to switch between 2 active calls .I respond at the first call , when respond the second call the first going in hold state and there is no way to hold the second call to resume the first . Whe

  • Captivate & SABA

    The company that I'm doing some work for wants to use SABA as the delivery LMS for the E-Learning packages I'm about to embark on creating. If anyone has any experience with SABA & captivate could you let me know if there are any problems with SCORM