Does the new ISR platform support 802.11ac APs

Hello,
Is there a Cisco WLAN controller that is compatible with the new 11ac 3700 APs that can be installed in a 3900 series ISR platform?
Thank you
James

Yes and no.  And I don't know which is which.  
The current way to stick a WLC into a router is using an SRE.  This is basically a module which contains a hard drive and you create a VM in form of a WLC.  Now the latest SRE firmware is 7.4.121.0 (release date 20 December 2013). 
There are currently three models of APs with can support 802.11ac.  They are the 3600*, 3700 and 2700.
Ok, here's where the "kicker" comes in.  
The 3600 (notice the "*") can support 802.11ac if you purchase the 802.11ac Wave 1 Module.  The 3600 is supported from firmware version 7.2.X.X but the 802.11ac Wave 1 Module requires a minimum firmware version 7.5.X.X (this version is now "deferred").   So this option doesn't work.
3700 requires a minmum of 7.6.X.X firmware and the newly-released 2700 requires a soon-to-be-released 7.6MR2 or 8.X.X.X firmware.   
Now if what I've mentioned above doesn't confuse you, this next one will bewilder absolutely:  Read the Release Notes for 7.6.X.X and scroll down to the Supported Cisco Wireless LAN Controller Platforms section and it's stated:  
Cisco Virtual Wireless Controllers on Cisco Services-Ready Engine (SRE) or Cisco Wireless LAN Controller Module for Integrated Services Routers G2 (UCS-E)
Hence, my response of Yes and No.  
I have two recommendations:  
On the bottom of the Release Notes, there's a Feedback link.  Use it.  Put a low score (this guarantees someone will contact you quickly).  When they contact you, ask them to do a proper QC on their documentation because, frankly, they've been "dropping the ball" lately.  
Next, contact TAC.  
Hope this helps.

Similar Messages

  • Does the new ipad Air support 802.11 AC?

    I really wanted this to be a feature on the new iPad Air as I wanted to upgrade my router. I see that it supports MIMO.  Not sure if that is the same as 802.11 AC

    Based on the published specs, doesn't look like it: http://www.apple.com/ipad-air/specs/

  • Does the new airport extreme support backing up via time machine to an external hard drive pluged into the usb port

    Does the new airport extreme support backing up via time machine to an external hard drive pluged into the usb port

    Yes, but you might want to note that the port on the AirPort Extreme is only USB 2.0, and that it runs at about half the speed of the USB 2.0 port on a computer, so things are going to be quite SLOW as far as backups are concerned, or anything else for that matter.

  • Does the new mac pro support the Apple cinema display

    Does the new mac pro support the Apple cinema display

    There is no 2007 23" Cinema Display
    There is a 2002 23" display that has the Apple ADC connector
    http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg
    There is also the 2004 23" display with a DVI connector.
    For the latter you just need a mini display port to DVI connector that plugs into the Thunderbolt port
    For the former you need that connector plu an DVI to ADC connector
    http://www.amazon.com/Apple-DVI-ADC-Display-Adapter/dp/B00011KHT2/ref=sr_sp-atf_ title_1_1/179-1314294-8358010?ie=UTF8&qid=1402766343&sr=8-1&keywords=dvi+to+adc+ display+adapter
    http://www.amazon.com/Dr-Bott-DVIator-US-110V/dp/B000NSGIQO/ref=sr_sp-btf_title_ 1_6/179-1314294-8358010?ie=UTF8&qid=1402766343&sr=8-6&keywords=dvi+to+adc+displa y+adapter
    http://www.amazon.com/Dvi-Adc-Conversion-Box-instock/dp/B0002CZJ7A/ref=sr_sp-atf _title_1_4/179-1314294-8358010?ie=UTF8&qid=1402766343&sr=8-4&keywords=dvi+to+adc +display+adapter

  • Does the new iwork still support services/linkback?

    I updated to Mavericks and to the new iWork and it all appears to be there, but doesn't seem to work. Not sure if I'm doing something wrong or if it's not supported anymore.
    Thanks!

    mhmayad wrote:
    does the new iwork support arabic language?
    iWork apps like Pages can usually display Arabic correctly but have various bugs that probably make them unsuitable for this language for most purposes.

  • Does the new time capsule supports uPNP ?

    hi, I have the previous version o time capsule and unfortunately I had to buy a Cisco router and use the TC only as a network disk, because it does not support UPnP, which is very important to me. can the new TC and airport extreme support UPnP ?

    use the TC only as a network disk, because it does not support UPnP, which is very important to me. can the new TC and airport extreme support UPnP ?
    The TC in bridge is still a decent WAP and switch.. upnp will still work via the cisco.
    It is a pity that Apple decided to go it alone on NAT-PMP, although a few other routers use it, mostly just Apple.

  • How does the new HTML5 video Support work? and what are the limitations?

    So the new Edge has been relased along with many new features including HTML5 video support So along with the new feature here are a few new questions!
    How does Edge load the Video? is it fully preloaded before Edge shows the content ? Or is it more of a "youtube" pregressive load while playing?
    Or can we choose?
    What is the recommended video file size  example 4mb ?
    How does edge deal with browsers that only support .ogg or .webm instead of mp4?
    How is the support on ISO & tablets? load times, "lag" etc?

    When you import an audio or video file a group is created for you. You can import media with the same name(videosample.ogv; videosample.mp4) to this group for ensuring browser compatibility. The corresponding format will be chosen depending on the browser that loads the composition.
    Regarding WebM format - You can also add a webm file in your composition;However since this is a royalty format, Animate will not show a live preview inside the Authoring tool. If you browser supports this then it will definitely play fine on browser preview.
    You can take a look at the In-app Video lesson which is available to you in the lesson panel for more details on how this works.
    And yes you have pre-load options for HTML5 Video too, however progressive download is not available. You will need to use scripting using JS for getting this functionality.
    Hope this helps and do try this out.
    -Sujai

  • Does the new AIR SDK support iOS 64-bit for Flex Developers?

    I saw that the new AIR SDK(December 18, 2014) has supported iOS 64-bit, but it was only supported in the new compiler. See this:
    Please note that support for creating universal IPA binaries will only be available in the new compiler. The legacy compiler is not (and will not be)
    compatible with iOS 64-bit. Because of this, it will be removed with version 16 of the AIR SDK. To ensure that Adobe as well as third party tools
    are able to work with this AIR SDK, the -useLegacyAOT option will continue to exist, but will be internally mapped to the new compiler.
    AFAIK, the Flex uses the old compiler and AIR SDK for Flex Developers doesn't include ActionScript 2.0 Compiler. As a Flex developer, what shall I do?

    Hi,
    I guess, you might be packaging IPA on windows machine.  Please try latest beta at http://labs.adobe.com/downloads/air.html which has iOS64 support on Windows machine as well.
    Thanks
    Govinda Gupta

  • For using two DAQCARD-AI-16XE-50 's: Does the newer NiDAQ software support only one card?

    On an older laptop (probably running Windows 95), the NI software V(?) supported two simultaneous DAQcards. With a new computer running XP and using a more recent version of NiDAQ (6.9.3), only one seems to be supported. If the NiDAQ software is the problem, which version should I install? The system device manager indicates that two cards are in fact installed.

    Hi Drum Tech,
    This was a problem with the driver assuming a serial number of '0' for both PCMCIA cards. They will be detected correctly in Windows but they will be incorrectly enumerated in Measurement & Automation Explorer. There was a patch fix for NI-DAQ 6.9.2 and this should have been resolved in the latest version of the driver NI-DAQ 7.1.
    I would suggest installing the latest version of the driver to fix this issue. Hope that helps. Have a good day.
    Ron
    Applications Engineering
    National Instruments

  • Does the new X1-01 support only MP3?

    Hello people! I'm currently an X6 16GB user and I'm planning to get the X1-01 as my second phone. I just like to know if the X1-01 supports MP3 only? I'm asking this because almost all my music files are in AAC format. Regardless, I'll just convert my AAC files to MP3. That's not an issue though.
    Thanks and more power!

    http://europe.nokia.com/find-products/devices/noki​a-x1-01/specifications It will play acc files
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Does the new IPOD G5 support  Mpeg1, Mpeg2 ?

    Most of my video is mpeg 2, I wonder is it support?
    or I have to convert it?

    no, and you wouldn't want it to. first the industry is moving toward h.264 and secondly thats where a lot of other players go wrong. small harddrives and mpeg2 do not make a happy equation.

  • Why is the new iPad Air not 802.11ac WiFi?

    Surprised it is still "n", although Apple says it is "faster".

    No one here would know why certain features are/are not implemented by Apple. Maybe send feedback to Apple:
    http://www.apple.com/feedback/

  • Should I wait to buy my iMac when apple upgrades it to support  802.11ac Wi-Fi ?

    Since apple released the Macbook air that supports 802.11ac wi fi, is it going to do the same with all the others products? Being so, I understand that if I by an imac today, it will not support 802.11ac. And this imac will not make the most out of the new airport extreme that delivers 802.11ac (even though the new airport extreme supports 802.11n), isn't that right?

    Well, it is reasonable to expect that, yes, the other hardware will get upgraded to ac as it gets updated.  As to when any particular model line will get updated, that is anybody's guess.  Nobody has any idea how long you may have to wait for that one particular feature.  Only you can decide if you are better off waiting or getting what you need now.
    Are you even maxing out your 802.11n network speed and bandwidth now?  If not, then having ac is sort of moot, isn't it?  Sort of like having a car capable of 200mph, but the traffic volume never lets you get above 70 anyway, it really just does not matter.

  • Does the 702W support 802.11AC

    Does the new Cisco 702W AP support 802.11AC standard??  and also like we have site survey image for 3600-I AP, does the 702W also have a site survey image, or I can site-survey jsut with any autonomous firmware on it.
    thanks

    Hi lovleen.arora
    from looking at the cisco documentation for the cisco 702w it does not support 802.11ac
    but maximum of 802.11n
    http://www.cisco.com/c/en/us/td/docs/wireless/access_point/702W/quick/guide/ap702Wgetstart.html#pgfId-51225
    hopefully this helps

  • Hi,,does the new 2011 imac 27 inch U.S version  support any pal signal inputs as video or hdmi through the video recorder device or kanex xd ?

    Hello,,
    I have 1 question please,,,
    does the new 2011 imac 27 inch from USA support or lay any PAL signal ??
    as for example
    I have a friend who lives in the middle east &  has kanex xd & he wants to connect it with the imac 27 inch from Satellite receiver  or PS3 though HDMI cable,, but yet the signal is PAL not NTSC in the middle east,, so will the imac 27 inch play the movie from the satellite in full colour or in blue & says cannot play the movie because its not NTCS ?  because this is U.S version  of imac then he might need an convertor?
    the same as if he want to record any hdmi or analog  device from his video recorder  device,,but the input is pal,,so will it plays normal in the U.S machine or will he find any trouble ???
    so can you pls give me an advice for him
    should he buy the imac from the U.S store or the europe store ??
    N.b : there is no mac store ONLINE in the middle east espicaly in Gulf, thats why he want to buy the imac from the mac store online,,
    and thank you

    Hello,,
    I have 1 question please,,,
    does the new 2011 imac 27 inch from USA support or lay any PAL signal ??
    as for example
    I have a friend who lives in the middle east &  has kanex xd & he wants to connect it with the imac 27 inch from Satellite receiver  or PS3 though HDMI cable,, but yet the signal is PAL not NTSC in the middle east,, so will the imac 27 inch play the movie from the satellite in full colour or in blue & says cannot play the movie because its not NTCS ?  because this is U.S version  of imac then he might need an convertor?
    the same as if he want to record any hdmi or analog  device from his video recorder  device,,but the input is pal,,so will it plays normal in the U.S machine or will he find any trouble ???
    so can you pls give me an advice for him
    should he buy the imac from the U.S store or the europe store ??
    N.b : there is no mac store ONLINE in the middle east espicaly in Gulf, thats why he want to buy the imac from the mac store online,,
    and thank you

Maybe you are looking for

  • Problem in WV with Family Base, need help

    We currently have 2 Android phones for my husband and me, and two iPhone 4 phones for my daughters. When I signed up for Family Base and created controls (no texting/internet after 10:00 p.m. etc) all four phones lost the ability to make or receive p

  • Distribution rule creation is not possible in CJIC after upgradation of ecc

    We are using  settlements for PS in ECC 6.0. Trying to partial settlement for WBS from CJ70 tcode, unable to find Final Settlement button/ icon where we give amount for settlement after some service patch upgrade .Can any one pls suggest any alternat

  • Creating a new database with oracle express

    how to create a database with oracle express. the web based interface for managing oracle sucks and it is too slow, they'd bet better of developing a rich client application for managing XE. Oracle XE comapraed to SQL Express is very poor.

  • Getting ERROR when installing ORE - "ERROR: a later version of ORE session is already installed"

    I am trying to install ORE server version in my Windows 7 OS laptop. I am getting the above error. I had previously installed ORE once. But had to to redo everything because I had installed R12 version of database. After installing the correct versio

  • CSS Comment Tags in Menu Tab?

    Is there a way to add CSS comment tags to my FAVORITES menu tab? Whenever I want to add comments to an external CSS document, I have to manually type /*...*/. It would be great if there was a comment button for CSS, like there is for HTML, so I could