Does the Officejet J3680 all-in-one support air print?

If so do I need an app?
This question was solved.
View Solution.

Hi,
Is this the one ?
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01106836&tmp_task=prodinfoCategory&cc=us&dlc=en...
No and no app available to make it really working.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Does the 8500 wireless all-ion-one support AirPrint

I bought the 8500 in late November 2010. I am getting an IPhone and want to know if I can use AirPrint with the 8500?

Sorry...I should have used the full description. The full ID for the printer is
Officejet Pro 8500 Wireless All-in-One Printer - A909g
I would take it, then, that it does support AirPrint.

How do I get photoshop cs10 on a windows 7 laptop after a wizard doctor download the officejet 7610 all-in-one is not printing showing i need to load paper but i've done as the person in the video is showing but it's stll not resolving?

HOW AFTER A DOWNLOAD OF A WIZARD DOCTOR FOR THE OFFICEJET 2710 TO RESOLVE NO PRINTING OR SCANNING AND FOLLOWING THE INSTRUCTIONS ON THE LED DEMO TO LOAD THE PAPER WHAT CAN i DO?

Dennis,
what has that go to do with Photoshop? If you can't print on an HP 7610 no matter what you may need to print it is a legitimate question. Yes? I guess you've nothing to offer in terms of a printing solution.
No caps as far as I can see from the full threads. So no shouting. Each time I asked the question the reply from the monitor was that I didn't put it in the form of a question. Assuming that the monitor was saying re-word it and send it again. So I did. Not realizing that each time it was a different post.
Mark

Uninstalling the drivers and programs for Windows 7 SP1 64 bit of the OfficeJet 7410 All-In-One

Hi
Which utility should be used to properly and completely uninstall the drivers and programs for Windows 7 SP1 64 bit installed with the OfficeJet 7410 All-In-One printer?
Thanks
Bye
balubeto

Hi @balubeto
I located a software removal utility for you but if you have other HP printers or scanners you may perform the more basica uninstall.
Software and Driver Removal Utility
Uninstalling the Printer Software (more basic uninstall)
I hope this resolves your inquiry.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Hp officejet j4580 all-in-one won't print from the internet.

My officejet j4580 all-in-one printer won't print anything I try to print off the internet, nor from microsoft word. I tried reinstalling, but it gets stuck at 94%, and it took almost 3 hours to get to that point. What can I do? My operating system is microsoft vista.
This question was solved.
View Solution.

Hi,
Here are a couple of things to try. I would first start with downloading and running the Print Diagnostic Utility. IF this doesn't clear it up, then try the document on Problems printing from the internet.
Print Diagnostic Utility
Problems Printing from the Internet
See if either of these help.
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

My HP Officejet J5780 All-in-One has stopped printing

My HP Officejet J5780 All-in-One keeps sending the messge" Out of paper,load paper and then press OK to start" even though I have paper already in my tray. It will not print and I don't know why. Can anyone please tell me what the problem might be to cause it to function this way and what I can do to fix it myself if at all possible? I would appreciate hearing from anyone that might be able to help me. Thank you and have a blessed day.Sincerely, Blesseda49

Hi
Try the steps here 'Out of Paper' Error Message Displays and the Product Does Not Pick Up or Feed Paper
Does this solve the issue?
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Hp officejet 6500 all in one won't print in black

I cleaned the printhead to eliminate clogs which had worked in past. Did not work this time.
Purchased and installed a new printhead and ran a report which showed the black ink working.
Ink levels in all cartridges, however, were low. Purchased new 920 XL cartridges and installed. Ran an alignment and said it failed.
Ran the cleaning of the printheads and then ran a report and still no black ink.
Ran status and quality reports and now the black will NOT print (when it was printing the day before with the new printhead).
HELP! Why will the black suddenly not print. The printhead is new and the hp ink catridges are all new.

Hi, Jamison ~
I had tried many of the things you noted (from the link) and at one point got an acceptable quality report (that included black) after replacing the printhead so it was particularly frustrating to then go back to no black after loading ink cartridges. I had done the partial reset too (as I had seen that recommendation on a forum) waiting hours for it to sort itself out wasn't acceptable when I needed to print something.
I have to admit that I finally threw in the towel and just got another printer. I need to be able to have something reliable and tire of always sorting through how to unclog; clean; reset; order parts; get new cartridges; run through mutiple cleaning printhead cycles. The lack of black print just seems to happen too often.
Thank you, though! I truly appreciate you taking the time to write a thorough response for me.
JFW
Jamieson wrote:
Hi @jfw , and welcome to the HP Forums!
I see you are experiencing print issues. I would like to try and help.
It appears you have covered much of the troubleshooting already.
I would recommend removing the ink cartridges, and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend this document on Fixing Print Quality Problems for the HP Officejet 6500 All-in-One Printer Series.
If that doesn't resolve the issue, the best recommendation I could make would be to contact HP directly. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide.
Thank you for posting on the HP Forums.

HP Officejet J3680 All-In-One Printer Fax Scanner Copier will not print, scan or copy

The only function my HP Officejet J3680 will do is fax. How do I make it print, scan and copy? How do I set the date and time?

Hi,
Download the Full functionality software from hp.com... http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=3441026&
Install it and use software to get use of Printer.
Happy Printing
Click on the "Thumbs up"button on the left to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

HP Officejet 5510 all in one - stalling of printing carriage and printing problems

I have had this All in One Printer since December 2004. It had been working fine until I replaced a cartridge at a refill store over a year ago. To deal with the problem with HP I felt would be time consuming so I put up with the problem and if I needed good quality printing, I would take it to Kinkos.
The print carriage is slow to respond and print from my computer and then in the middle of the task the carriage will stop and stall or bang like it wants to move, but is stuck and then, with all the lights flashing, I get a message in the copier window for me to clear the printing jam or carriage jam and then press OK.   I open the door to the carriage and then close it and press OK. It does not always work the first time to make the carriage stop banging. Eventually it will stop and the paper will release and then it will continue finishing the task, but a lot of the time what is printed has double printing with jagging to one side of the paper.
This is also affecting receiving any faxes because it involves print carriage.
I have done all the steps for clearing a paper/carriage jam. There is nothing visable to cause a jam. I have managed to do the self test after the printer goes through some banging and then telling me to open the door to clear the jam.    I have done the steps to
clean the cartridges and then again do a self test.   I downloaded the latest driver/updates for the printer, but the problem persists.
The cartridge refill store , not seeing the problem first hand, keeps offering for me to bring back the cartridges if the problem persists and replace them.
Do you think it is the cartridges or the unit?   I just replaced the black cartridge in December 2009 and have not print much knowing
the quality would be poor. Yesterday I saw a message that I am low on black ink. That does not seem possible.
When I do the self test it is showing white lines through the colored bars and I am missing the pink or red bar. So I know I have to replace the color cartridge.
As far as alignment, when I did the first of two self tests,                                                     Second Test After the Drive Download
                                                           the Vertical Cartridge to Cartridge read    -12                               -24
                                                       the Horizontal Cartridge to Cartridge read    -24                                99
                                            the Black Bidirectional Cartridge to Cartridge read    -54                                0
                                             the Color Bidirectional Cartridge to Cartridge read      6                                 6
After doing the steps to automatically clean the cartridges, it printed a report with symbols at the top. They look to be squeezed together and the top portions of the symbols are missing. The black bar has some white indents along the edges and the blue and yellow bars are spread more apart with some lighter colored lines vertically.
I have Windows XP and the HP Director was not working. I downloaded the patch and it is working correctly telling me that both cartridges are low, the black more than the tri-color and now a message that the print carriage has stalled. The help button tells me to do everything I have already done.
Do you have an answer that I can manage by myself or would it be better to take it to a computer repair place?
Thank You , 918nifferf

I have a carriage jam on my HP Officejet 5510 which I cannot correct.. I have tried everything I know to do. There are two black pieces that will not spring down when the cartridges travel across. I th en get a carriage jam message.
Do these pieces need lubricated?
How can I get t hem to go down when the carriage goes across?
Thanks for any information or help options
Karol

Officejet 150 all-in-one stuck "now printing"

Stuck on "now printing" - though it isn't. It printed the "congatulations" page after installation and hasn't printed anything since.

Hello jjctso,
Welcome to the HP Forums.
I see that that printer is stuck on the Configuration page and it will not move on.
I suggest that you cut all power to the printer and let it sit for at least 1 min and then reconnect the power. This will do a semi reset on the unit.
Here is a document that will give you instructions for Resetting the All-in-One.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP Photosmart 7520 all in one showing Air Print Macbook Pro Maverick 10.9.4

At one point I did not have Air Print showing beside printer in system preferences. Printer and scanning is working fine, but I was told by someone on this message board that Air Print should not show. How do I remove Air Print. I have a Macbook Pro Maverick 10.9.4. HP Scan version 4.1.1. I did an update earlier this year and the Air Print was not there. Did not see board for Mac to choose for issue. Thanks for your help.
This question was solved.
View Solution.

Good morning, happy Friday @ladybugs48
I understand you are seeing AirPrint next to your printer, meaning you are currently using the AirPrint driver and not the HP driver. I can help you change this. Please complete the steps below;
Reset Printing System
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
When you add the printer, to ensure you are using the HP driver, not the AirPrint driver use the steps below;
Select Add Other Printer or Scanner
Select the printer you are adding and next to 'Use' you can select the printer driver
Please let me know if this resolves the issue. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Does the newest mac mini ($799 one) support intel vt-d when use the virtual machine like fusion?

I've got some info about this mac mini. the cpu is i5-2520M? which support vt-d. at least intel's page say it can.
I want make sure about this before i buy it, plesas help. thank you~~!

Well, I'm still working on this issue. I know it has something to do with Airport traffic, but not all types of Airport traffic, because I wrote a test program to stream tons of bits across the network, but it doesn't hiccup a bit. My guesses are Airport traffic that writes to the Firewire drives (hence not catchable in a one by one test, since it takes two) or Airport AFP traffic. I'm debating the best way to test these theories. By the way, if I leave the problem long enough, I do eventually crash the computer. Deals with memory allocation, but hardware tests pass.
Fri Jan 12 08:05:44 2007
panic(cpu 0 caller 0x001414FE): zalloc: "kalloc.64" (34240 elements) retry fail 3
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x13f93918 : 0x128d1f (0x3c9540 0x13f9393c 0x131df4 0x0)
0x13f93958 : 0x1414fe (0x3ca24c 0x3c97d0 0x85c0 0x3)
0x13f939b8 : 0x12d994 (0x1509c10 0x1 0x13f93a28 0x1e56ba)
0x13f939e8 : 0x12d9b3 (0x3c 0x1 0x2ffd7d3 0x0)
0x13f93a08 : 0x33bdd4 (0x3c 0x1 0x13f93a38 0x13f93f44)
0x13f93a28 : 0x1bd408 (0x38 0x50 0x0 0x13f93f44)
0x13f93f68 : 0x378337 (0x2f3e5dc 0x2cdd030 0x2cdd074 0x0)
0x13f93fc8 : 0x19acae (0x32ec2d4 0x0 0x19d0b5 0x33b097c) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb30df958
Kernel version:
Darwin Kernel Version 8.8.1: Mon Sep 25 19:42:00 PDT 2006; root:xnu-792.13.8.obj~1/RELEASE_I386
Mac Mini Mac OS X (10.4.8) 1 GB

Officejet J3680 All-in-One

Print preview is extremely slow and not functioning acturately. is this a printer problem or a browser problem?
This question was solved.
View Solution.

Hello!
Print preview is not a printer issue, it would be an issue with what program you are using to preview what you are about to print
I am a HP employee.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Officejet 6210xi all in one won't print in color

I didn't use the color part of my printer for a year, then I bought and installed a new color ink cartridge. However, it still won't print in color. It will print in black but only black, no greyscale. I've tried cleaning the heads, resetting the system, I've double checked to make sure the ink cartridge is the correct one and it is. I've looked through all the faq's in the printers menu but nothing works. Any help is appreciated, I'm about to give up and just get a new printer.

Hi @Jaim_Faul ,
I see that you are having issues printing in color. You tried a new cartridge and have the same results. I would like to help
you out today.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Try these steps to see if it will resolve the issue.
Missing, Faded, or Dull Colors.
Go to Step 3 - Print a diagnostic page. Just to see if it is a hardware or software issue.
You mentioned that you cleaned the cartridge heads, I still included this document to make sure all the areas for the electrical contacts were cleaned on the cartridge and inside the printer. Cartridge Error. Disregard the title.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a great weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

My HP Officejet J6480 All-In-One has started printing multiple pages.

All of a sudden my officejet J6480 printer is printing multiple pages every time I print. I've made sure it is saying only 1 copy, but it still continures printing the extra pages.

Disconnect the power cable and the usb cable from the computer. Restart both the printer and the computer. Clear the print que. Fan all the pages in the printer. Power on the printer connect the usb cable and try printing again. Happy Printing
The HP Print and Scan Doctor will guide you through troubleshooting your network printer setup and connectivity problems. It also provides you with a wealth of information regarding your network and, in some cases, automatically fixes network connectivity issues.
The HP Print and Scan Doctor runs on Windows XP, Vista, Win 7, and Win 8. You will need administrator privileges in order to run the utility.
Get it here: HP Print and Scan Doctor
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Does the Officejet J3680 all-in-one support air print?

Similar Messages

Maybe you are looking for