Does the Pop-Up Menu causes the Video a small jump to the closest Pop-Up chapter?

I have setted five Pop-up Chapter Menu for my project but after burning the blu ray, I have notice the vidoe coming close to one of the Pop-up Chapter will a small jump to the pop-up point. It happens to all of the Pop-Up chapter. Is there a way to make the movie smooth without the slight jump when approaching the Pop-up point. Also is there a away to view the pop-up menu when I build the project to ensure it is working? I cannot find on the Encore help menu, thanks for reading.
Wayne

Bummer. Could be a problem with the MBP drive. Are you using Re-writable discs maybe?
Check the discs work in your HP machine. They may have burnt but not successfully. Your HP machine may not be able to open them either.
Have you considered using a USB flash device to transfer the photos, or just copy them over your home network? CD is a slow an cumbersome method.

Similar Messages

  • TS4425 How can i do when the latest iCloud Terms & Condition does not pop up?

    When I go to photo stream on my appletv, it says "unable to sign in The icloud terms of service have changed. For more info, go to http://www.apple.com/support/icloud".
    I have tried this resolution on my iphone and ipad already:
    On your iOS device, tap Settings > iCloud.
    Note: Verify that this is the same Apple ID you are using on the Apple TV.
    After a moment, the latest iCloud Terms & Conditions will load.
    Unfortunately, it does not pop up the icloud terms and condition for me to accept.
    Anyone can help me?
    Thanks all~

    Caused by the Ask Toolbar extension in Firefox 3.6.13, disable that extension or un-install it.

  • Why does the Safari message "This is a non-secure form" pop up everytime I try to use yahoo mail?

    Why does the Safari message "This is a non-secure form" pop everytime I go into yahoo mail?  If I don't press the send option my whole computer freezes.

    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

  • My MacBook running Mountain Lion does not allow me to view any videos on the Internet. The place where the video is supposed to be just shows black rectangle. Is there anything I can do to make videos on line work?

    My MacBook running Mountain Lion does not allow me to view any videos on the Internet. The place where the video is supposed to be just shows black rectangle. Is there anything I can do to make videos on line work? I discovered that Java quits immediately. Could that be the cause? If so, how do I fix it?

    My MacBook running Mountain Lion does not allow me to view any videos on the Internet. The place where the video is supposed to be just shows black rectangle. Is there anything I can do to make videos on line work? I discovered that Java quits immediately. Could that be the cause? If so, how do I fix it?

  • Why does the menu option change to "save as" after I select the print button?

    why does the menu option change to "save as" after I select the print button?

    >>The print command is selected in the File pull down menu, the print menu page pops up, I can then select my networked printer (which incidentally is confirmed to work with other software), the print command is in the bottom right hand corner and finally after depressing this print button a "save as" pop-up menu appears and then it only re-saves the file. Is this an issue with the pdf reader install?  

  • Why does the keyboard focus keep switching to the menu bar?

    Does anyone else have the problem of Photoshop CS6 constantly setting the keyboard focus to the menu bar? This makes it difficult to use shortcuts.
    Typical examples: I want to switch to the Move tool, so I press V, but instead, the View menu drops down. Or I press T for the Type tool, but instead, the Filter menu drops down. This happens often and it's very annoying.
    This also happens in Premiere Pro CS6, and happens on both my Windows 7 and Windows 8.1 machines. Doesn't happen in other applications, and is not related to actually using a menu, i.e. if I choose something from a menu, then press V, Photoshop will often work correctly and activate the Move tool. This behavior seems to happen randomly.

    Alt doesn't really "unhide" the menu bar (speaking of Photoshop), but it's always been the introducer of keyboard operations for "keyboard accessbility" - i.e., operation of Windows applications without mouse.
    Alt causes little underlines to show up under the key characters of menu items, and prepares the system for the next character being typed to open a menu - so for example you press something like 'e' and the Edit menu pulls down.  Now you use an arrow key to move to the next item, or maybe a single character that's associated with one of the menu entries.
    Photoshop's goals for using modifier keys kind of conflict with this.  They've apparently tried to reach a balance where using the Alt key to modify some operation cancels the introduction of the next menu item. 
    But I don't think it's possible to be perfect at that, especially for example if the user presses Alt, decides not to do the operation he was thinking about doing (e.g., zooming out), then just releases the key.  Another factor might be the habits people get into for choosing tools.
    As a contrast, one person might not press the Alt key until they're sure they're going to do something with it (e.g., zoom out), and that same person might only choose tools from the Tools panel by clicking on them.  Another person might press the Alt key sometimes, but then stop before doing the operation it modifies.  That same person might be in the habit of choosing tools by their letter (e.g., E for eraser).  It's clear to see how the first person might never get into a condition where the menu introducer key (Alt) leaves them in a state where a menu opens inadvertently, while the latter might see it regularly.
    As far as why Photoshop might get into a mode where the menu introduction occurs when you HAVEN'T pressed the Alt key, I don't know; I certainly haven't seen that reported much if at all here on the forum.
    -Noel

  • Very frustrated with my LG G2. My screen freezes all the time when texting. This started after the upgrade. My husband's phone is doing the same thing. We have reset the phones, deleted off pics and videos but nothing helps.

    Very disappointed in my LG G2. My screen freezes all the time especially when texting. This started after the update. My husband's phone is doing the same thing. We have done a hard reset, deleted pics and videos to clean up the phone but nothing helps. Any suggestions? Our phones are new.

    Lots of Frustration.  In some cases the LGG2 is rendered useless even as a phone.
    Here is what I did.
    Got replacement Phone.
    Same problems but I shut down all apps that I purchased even though they worked before KitKat.
    Found that If I have both WiFi and LTE Data on at the same time battery chewing stops. Do Not know why.
    Then I got 2 CM free utilities.  The Clean and Wash utilities. Run them and find the culprits grinding CPU
    cycles and running down the battery.  Number One is the Verizon Voice Mail service constantly turning on and off
    and retrieving data not there.  Turn of the extra Voice mail and use the old access with the *6.  Unless you have
    100 messages a day for business your hosed until this KitKat issue is fixed. Get the CM battery utility.
    YOU can see the battery suckers and shut them down when not using automatically.
    Start putting back one application at a time you used often and see it they work and if the utilities will tune them
    down if they cause problems.  The LG will get better but with some limitations.
    LG and Verizon have a problem with what was a great phone.turned bad overnight.
    whatmorecanyousay

  • Why does the apple logo randomly pop up on my new ipod touch 5g??

    why does the apple logo randomly pop up on my new ipod touch 5g?????

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    iOS: How to back up your data and set up as a new device
    - Make an appointment at the Genius Bar of an Apple store since it appears your iPod is defective.
    Apple Retail Store - Genius Bar

  • I am not able to email a file from Adobe Reader. When I click to share the file, the option does not pop up to share (via Mail, Message, Air Drop, etc.).

    I am not able to email a file from Adobe Reader. When I click the button to share a file, there is no option for route from which to share (Message, Mail, Air Drop, etc. does not pop up).

    What version of Reader and OS X?

  • Does the 6600GT-VTD128 support video capture?

    Hi,
    I recently purchased an MSI 6600GT-VTD128 video card.  The product information seems to suggest that the card has video input capabilities, and there is an adapter that plugs into the card that has a number of connections, one of which is labeled S-Video in.  However, I haven't been able to get any video capture to work.
    Does the card actually support this functionality?  If not, what are the video input connections for?  If so, is there some documentation as to how to set it up?  
    So far, I tried installing the video capture drivers that come with the card.  I checked the manual.  I checked the MSI web site FAQs.  And I searched the forums.
    Any help would be greatly appreciated.
    Thanks,
    Daniel

    Thanks Richard.  Yes I do have a breakout cable like that.  Actually, I described it in my original message.  So, I am guessing from your message that you believe that the card should have the capability to capture video.  
    In my original message, I asked if there was any documentation on setting up the card for video capture.  The manual does not describe the procedure, nor does the MSI web site.  
    There are drivers on the CD that claim to be for video capture, but they had no effect when I installed them.  In fact, there appears to be no way to tell whether the drivers were actually installed successfully.
    If anyone out there has successfully used this card for video capture, please let me know.

  • Hi,,does the new 2011 imac 27 inch U.S version  support any pal signal inputs as video or hdmi through the video recorder device or kanex xd ?

    Hello,,
    I have 1 question please,,,
    does the new 2011 imac 27 inch from USA support or lay any PAL signal ??
    as for example
    I have a friend who lives in the middle east &  has kanex xd & he wants to connect it with the imac 27 inch from Satellite receiver  or PS3 though HDMI cable,, but yet the signal is PAL not NTSC in the middle east,, so will the imac 27 inch play the movie from the satellite in full colour or in blue & says cannot play the movie because its not NTCS ?  because this is U.S version  of imac then he might need an convertor?
    the same as if he want to record any hdmi or analog  device from his video recorder  device,,but the input is pal,,so will it plays normal in the U.S machine or will he find any trouble ???
    so can you pls give me an advice for him
    should he buy the imac from the U.S store or the europe store ??
    N.b : there is no mac store ONLINE in the middle east espicaly in Gulf, thats why he want to buy the imac from the mac store online,,
    and thank you

    Hello,,
    I have 1 question please,,,
    does the new 2011 imac 27 inch from USA support or lay any PAL signal ??
    as for example
    I have a friend who lives in the middle east &  has kanex xd & he wants to connect it with the imac 27 inch from Satellite receiver  or PS3 though HDMI cable,, but yet the signal is PAL not NTSC in the middle east,, so will the imac 27 inch play the movie from the satellite in full colour or in blue & says cannot play the movie because its not NTCS ?  because this is U.S version  of imac then he might need an convertor?
    the same as if he want to record any hdmi or analog  device from his video recorder  device,,but the input is pal,,so will it plays normal in the U.S machine or will he find any trouble ???
    so can you pls give me an advice for him
    should he buy the imac from the U.S store or the europe store ??
    N.b : there is no mac store ONLINE in the middle east espicaly in Gulf, thats why he want to buy the imac from the mac store online,,
    and thank you

  • Does the video adapter output both S-Video and Composite simultaneously?

    I have a multi-zone receiver which converts S-Video to component for the main zone and passes S-Video signals through to zone 2 but does not convert them to composite which is how that zone is set up. I solved a similar problem with my DVD player by connecting both the component output and composite output of the DVD player to the receiver allowing high quality viewing in the lounge room and passable viewing in the bedroom.
    I realise the quality from the adapter is questionable particularly for composite but I'm still interested if both S-Video and composite signals are output from the MBP 17" via the adapter simultanesouly.
    Thanks,
    Max.

    I have a follow-up question which may help answer the original question. Does the MBP have to detect the external display when connected via S-Video/Composite in the same way that it has to when connected via DVI? My Dell notebook had so much trouble detecting composite and S-Video connections that eventually I gave up so I'm a little "once bitten twice shy" on this. If the MBP doesn't attempt to detect the external display via S-Video or composite then it must output both S-Video and Composite signals continuously (which would be great).
    Thanks,
    Max.

  • For some reason the Apple ID window in iTunes  and App Store now seems to have a character number constraint. As a result I am unable to enter the final few characters of my Apple ID which I have had for many years. Does anyone know what has caused this?

    For some reason the Apple ID window in iTunes and App Store now seems to suddenly have a character number constraint which prevents me using my 29 character Apple ID. As a result I am unable to enter the final few characters of my Apple ID which I have had for many years. Does anyone know what has caused this?

    You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
    (118441)

  • Does the ipod video work with the original ihome?

    does the ipod video work with the original ihome?

    Welcome to Apple Discussions!
    If you mean this one...
    http://www.ihomeaudio.com/products.asp?productid=10015&deptid=1003
    Them yes. I am using one myself. You may want to purcahse these if it does not come with them (depending on how old it is)
    http://www.ihomeaudio.com/products.asp?productid=10016&deptid=1000
    btabz

  • Is it possible to hook a USB external hard drive to an iPad?.....the HD has video on it that I wanna watch on my iPad but don't wanna store it on iPad or iTunes....and way format does the video need to be in to watch on iPad?

    Is it possible to hook a USB external hard drive to an iPad?.....the HD has video on it that I wanna watch on my iPad but don't wanna store it on iPad or iTunes....and way format does the video need to be in to watch on iPad?

    There are some wireless external hard drives that can be used with the iPad.
    The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
    Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
    Another option:
    Expand your iPad's storage capacity with HyperDrive
    http://www.macworld.com/article/1153935/hyperdrive.html
    On the road with a camera, an iPad, and a Hyperdrive
    http://www.macworld.com/article/1160231/ipadhyperdrive.html
    Pad2, the new iPad Supported Video Formats & Movie Formats
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
     Cheers, Tom

Maybe you are looking for

  • Doubt in RSRT regarding generate query.

    Hi All, I have a doubt in transaction code RSRT (Query monitor). Under the tab environment, there are 2 options. 1) Generate queries. 2) Gen.Queries directly as shown below. i.e in RSRT> Environment> Generate Query and   RSRT> Environment> Gen. Query

  • To save each Project file in AIR application separately

    Hello I'm on the verge of developing a Desktop AIR application for a particular purpose. Now this application has the facility to develop multiple projects. What I would like to do is to save each of this project in a separate file in a specified loc

  • Using REPLACE on CLOB causes increase in CACHE_LOBS...

    I have a requirement to use the built in REPLACE function on a CLOB variable as part of a larger PL/SQL process. I'm using Oracle 11g R2 and the function works OK, in that it does the replace as required, but as the procedure runs (there are around 2

  • Cannot download OC4J 9.0.3 Preview

    Oracle9iAS Containers for J2EE (9.0.3) Developer Preview Document contains no NATA

  • PointBase automatic table creation mapping reliability?

    If I specify this in the weblogic-cmp-rdbms-jar.xml file for Automatic Table Creation: <field-map> <cmp-field>ADDRESS</cmp-field> <dbms-column>U_ADDRESS</dbms-column> <dbms-column-type>VARCHAR(30)</dbms-column-type> </field-map> <field-map> <cmp-fiel