Does the printer models "Canon IR 2016 URF ll LT" support SAP printing?

HI All,
Does the printer models "Canon IR 2016 URF ll LT" support SAP printing?
What is the device type we need select SPAD configuration..
I have checked all the possible device type ,there is no physical output has received .
but in SP01 status.."completed". Which device type should i select SAP..
Reagrd
Jagadish

Dear Jagadish,
Did you try with CAN22 : CANON iR 2200.
Regards,
Naveen.

Similar Messages

Apple new macbook pro dosent have a disk drive. Does the older model have a problem with the disc drive and so is removed in the new model?

apple new macbook pro dosent have a disk drive. Does the older model have a problem with the disc drive and so is removed in the new model?

No. Apple replaced the disk drive with a solid state drive (SSD) instead. The SSD is faster the old disk drive.
Allan

Does the SD - X D slot on HP C410c PREMIUM FAX AIO Printer recognize and read SDHC and SDXC cards?

Does the SD - X D slot on HP C410c PREMIUM FAX AIO Printer recognize and read SDHC and SDXC cards?

Does the SD - X D slot on HP C410c PREMIUM FAX AIO Printer recognize and read SDHC and SDXC cards?

Does the F2 linecard (N7k-F248XP-25) on Nexus 7010 support Layer 3?

Hi All,
I am sure that F1 linecards on Nexus weren’t able to support L3 functionality, so my query is does the F2 linecard (N7k-F248XP-25) on Nexus 7010 support Layer 3?
Regards,
Mayank

Hi, Im know that this is resolved but i have a f2e Card
Model:                 N7K-F248XP-25E
Type (SFP capable):    1000base-SX
and i can not configure an interface as l3
NX7K-1-VDC-3T-S1-L3FP(config)# interface ethernet 7/2
NX7K-1-VDC-3T-S1-L3FP(config-if)# no switchport
ERROR: Ethernet7/2: requested config change not allowed
whats the problem??
Software
BIOS:      version 2.12.0
kickstart: version 6.2(2)
system:    version 6.2(2)
BIOS compile time:       05/29/2013
kickstart image file is: bootflash:///n7000-s2-kickstart-npe.6.2.2.bin
kickstart compile time: 7/9/2013 20:00:00 [08/22/2013 04:51:27]
system image file is:    bootflash:///n7000-s2-dk9.6.2.2.bin
system compile time:     7/9/2013 20:00:00 [08/22/2013 08:07:03]
Hardware
cisco Nexus7000 C7010 (10 Slot) Chassis ("Supervisor Module-2")
Intel(R) Xeon(R) CPU         with 12224956 kB of memory.

Does the current WebKit version in Air SDK 3.5 support Uint8Array or any bufferArray stuffs?

Does the current WebKit version in Air SDK 3.5 support Uint8Array or any bufferArray stuffs? If not, is there an alternative or workaround solution so I can reuse some javascript routines that requires bufferArray like Uint8Array...? Thanks in advance.

You needed to use SDK 5.1 or later. AIR uses 6.0 or 6.1 now, so Retina is ok without any special tricks.

When I try to enter my Printer model to search for drivers on HP support site the input panel disappears . It was OK in previous Firefox versions but not in 18.

I tried to search for driver for one printer at HP web site. When you go on support page you are presented with 3 options. If you click on the first to search for drivers a panel is displayed that has input box to enter your printer model. When I click on that input box the panel disappears.

'''Try the Firefox SafeMode''' to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_safe-mode-window_2 Troubleshoot Firefox issues using Firefox SafeMode]
When in Safe Mode... <br />
* The status of plug-ins is not affected.
* Custom preferences are not affected.
* All extensions are disabled.
* The default theme is used, without a persona.
* userChrome.css and userContent.css are ignored.
* The default toolbar layout is used.
* The JIT Javascript compiler is disabled.
* Hardware acceleration is disabled.
* You can open the Firefox 15.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Why does the "Simulation Model Converter" create a 1-D array when a subsystem is converted

Hi,
I want to convert a complex Simulink Simulation with many subsystems into LabVIEW VI. One Problem I have is the one in the subject. I attached a simple example Simulink file and the result of the "Simulation Model Converter" where my problem occurs.
In this example I have two equal block diagrams, with the differnce, that the one below uses a subsystem (that only contains a gain). But why is the data inside the sub system a 1D array? Is that necessary? If I change the array by hand into a normal constant, the simulation still works. Is there a way to prevent this wrong conversion.
Thank you
Attachments:
Simulink Example.JPG ‏55 KB
Example.vi ‏60 KB
Subsystem.vi ‏243 KB

Hello Talvi,
I am guessing that you do not have Simulink installed on the computer where you are doing the conversion. If you do the conversion on a computer where Simulink is installed, you will get better results. This is mentioned in the help topic: Using the Simulation Model Converter. If you are still having trouble, can you please let us know which versions of the software involved you are using?
Regards,
Angela M
Product Support Engineer
Message Edited by Angela M on 11-19-2008 04:36 PM

Does the basic model of 64Gb enough for a Windows install?

Hi all.
Am thinking and very interested in getting an 11" MacBook Air.
Question: Is the basic model of 64GB disk space, *enough to install Windows* (7) OS for Bootcamp?
Thanks and cheers

I do the very minimal with Windows and I still need about 15-20GB just so I don't have to worry about running out of space. If you are going to be using Windows regularly, 32GB partition may not be enough, unless you are saving to external drives.
Bryan

Text won't print on Canon LBP5050 after software update, Text won't print on Canon LBP5050 after software update

I'm running OSX, 10.6.7 on a Mac mini and on a macbook pro. Since I've run an update, neither of them will print text, only pictures, on my Canon LBP5050 printer (which I bought from Apple). I've checked the drivers, and I'm already using the latest. I've reset the print process and that had no effect either. Anyone got any ideas? It rather makes the printer useless.
Thanks,
Ariane

Solution found! Delete old printer driver, restart machine then go to http://support-au.canon.com.au/contents/AU/EN/0900772205.html
With the CAPT driver installed, to add the printer, you do need to click the More Printers button. This will be located in the bottom left hand corner of the Add Printer browser.
Restart machine again and turn printer on, hopefully then you'll be able to print text and images without any problems at all! works for me and I'm on a Macbook Pro running 10.6.8

Hi,,does the new 2011 imac 27 inch U.S version support any pal signal inputs as video or hdmi through the video recorder device or kanex xd ?

Hello,,
I have 1 question please,,,
does the new 2011 imac 27 inch from USA support or lay any PAL signal ??
as for example
I have a friend who lives in the middle east & has kanex xd & he wants to connect it with the imac 27 inch from Satellite receiver or PS3 though HDMI cable,, but yet the signal is PAL not NTSC in the middle east,, so will the imac 27 inch play the movie from the satellite in full colour or in blue & says cannot play the movie because its not NTCS ? because this is U.S version of imac then he might need an convertor?
the same as if he want to record any hdmi or analog device from his video recorder device,,but the input is pal,,so will it plays normal in the U.S machine or will he find any trouble ???
so can you pls give me an advice for him
should he buy the imac from the U.S store or the europe store ??
N.b : there is no mac store ONLINE in the middle east espicaly in Gulf, thats why he want to buy the imac from the mac store online,,
and thank you

Hello,,
I have 1 question please,,,
does the new 2011 imac 27 inch from USA support or lay any PAL signal ??
as for example
I have a friend who lives in the middle east & has kanex xd & he wants to connect it with the imac 27 inch from Satellite receiver or PS3 though HDMI cable,, but yet the signal is PAL not NTSC in the middle east,, so will the imac 27 inch play the movie from the satellite in full colour or in blue & says cannot play the movie because its not NTCS ? because this is U.S version of imac then he might need an convertor?
the same as if he want to record any hdmi or analog device from his video recorder device,,but the input is pal,,so will it plays normal in the U.S machine or will he find any trouble ???
so can you pls give me an advice for him
should he buy the imac from the U.S store or the europe store ??
N.b : there is no mac store ONLINE in the middle east espicaly in Gulf, thats why he want to buy the imac from the mac store online,,
and thank you

Which Printer model can be used as a True A3/A4 Printing/Scan/Copy Wireless with ePrint

I have been going around in circles to find a suitable printer which can do the following
1) Automactically detect A3 or A4 paper size and print accordingly scale automatically is required
2) Copy an A4 document and print the same on A3 Paper
3) Network connectivity - Wired and Wireless
4) Mobile Printing from iPhone, iPad, Android devices
Please consider this printer will be used to print mostly from a mobile device, and the print material will have to be printed on an A3 paper most of the time as the client for whom i would like to purchase the printer has reading difficulties with small text.
Appreciate some assistance, if anybody can help me out.
This question was solved.
View Solution.

The HP Officejet 7610 has most of the features you want - see the product description here. It will scan up to 11.79" x 17" and will print and copy A3 and A4 size sheets.
Special features
Wi-FiWireless networking included
Individual InksReplace only the individual ink cartridge that runs out
HP ePrintThis product has HP ePrint features
Automatic document feederAllows multiple pages to be copied or scanned at one time
FaxFax capability
Wireless direct printPrint on the go with the wireless direct feature
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Does the iPad model 1395 have a dictation microphone

I gave my daughter my iPad model a1395, 16GB wi-fi only. She wants to dictate messages but the built in microphone doesn't appear when she opens mail or other apps.
Where can I find it on her iPad? If it isn't available, is there an app that she can use to serve the same purpose?

You have an iPad 2 which doesn't have the dictation microphone.
Download the free app Dragon DIctation.
 Cheers, Tom

Oracle Agent 12g: how does the license model look like?

Hi ,
if I install the Oracle agent 12g on a linux box, on which no other Oracle products are installed:
- does this require an extra license?
We just want to monitor the host (linux box) via Oracle agent, that's all.
It's my understanding that the installation of an agent on a host does not require any license at all - but going through the documentation of the CloudControl (Oracle® Enterprise ManagerLicensing Information 12c Release 1)
I didn't find any answer to my question. Is there any documentation available which contains the answer to my question?
Any help willl be appreciated.
Rgds
Jan

There is no license required to deploy an agent. Host monitoring is part of base EM functionality and does not require any license.
-Mughees

Does the unlocked model of the iphone 6 4.7 work with Verizon?

im looking to buy a unlocked iPhone 6 and I was told on the phone it work with Verizon but I want a 2 nd answer before doing so

At&t is crap in my town and T-Mobile only has 2G and I don't want a contract so if I go to Verizon and buy a phone outright would it be unlocked ?
To be specific, While Verizon is a CDMA carrier its LTE network uses GSM and as such sim cards which would be fully supported on an unlocked iPhone. However, in the event you are in area without any LTE coverage, the unlocked iPhone 6 would be unable to revert to Verizon's 3G CDMA network or anything else so the iPhone would be without any kind of service at that point.
In short if you plan on using Verizon, buy a Verizon iPhone. The GSM portion is unlocked for international carriers and you will have no issues on Verizon.
http://www.verizonwireless.com/aboutus/commitment/safety-security/device-unlocki ng-policy.html

Tracking theives, does the 3g model's gps tracking justify the added cost?

I'd like to track down my ipad if it ever gets stolen. Ive read mixed reports on the effectiveness of the skyhook wifi-only model vs the skyhook + 3g/GPS model, and whether i would need to buy a plan just to use the gps on it. Anyone have experience with this?

David M Brewer wrote:
iPadKisser wrote:
Just call 911.
Call 911 for a missing iPad! Are you crazy And let's say you find the iPad? What are the police going to do? Probably nothing...
In some localities you can get charged for tying up the 911 line for a non-emergency.

Does the printer models "Canon IR 2016 URF ll LT" support SAP printing?

Similar Messages

Maybe you are looking for