Does the pro works in a windows network environment

I would like to purchase a macbook pro (15") but I'm not sure if it will work in a windows network environment.
please help!! does the pro works in a windows network environment
My situation:
I work in a company 2500 employees, 3 locations, 7 sub-locations 1 sever. almost 80% of the locations is/will be wireless connected.
need a reliable fast and tough laptop to support users on all locations.
leonard

It would be neat though, to be able to connect
wirelessly on my Dell WinXP laptop over this dial-up
connection at home, the few times I'm going to use
it. So I thought eBaying one of those nice "old"
hockey puck Airport Extremes with built-in 56k
modem.
That should work.
From what I understood, the AE doesn't have a
web-based configuration interface, like most
broadband routers have, but one needs to configure it
installing a software utility, right?
Correct
Being in a
Windows only environment, will I be able to configure
my Airport Extreme-to-be using the Windows software
on
<http://docs.info.apple.com/article.html?artnum=75422>
Yes.
http://www.apple.com/support/downloads/airport42forwindows.html
? Does anyone of you have any experience with this?
Yes
If so, could you reassure me that this is actually a
feasible idea?
Yes if does work.
Does the AE dial-in automatically whenever you're
generating traffic, by the way, or do you still have
to establish the connection manually?
You can configure it that way, but it is easier to use Jon Sevy's Java utility.
Jon Sevy has a Java Utility for this purpose.
You will need Java in order to run the utility

Similar Messages

"i lost my iphone 4 and barred it with the network and suspended the SIM. I have gone to icloud and requested a wipe. Does the wipe work via the IMEI or the SIM?

"i lost my iphone 4 and barred it with the network and suspended the SIM. I have gone to icloud and requested a wipe. Does the wipe work via the IMEI or the SIM?

non of them it works with the appleID so if the thief restore the device so your appleID is not longer used you can't whipe or block it from icloud
anything else would put apple in big trouble with the law in most countries

Does prem pro work with a nvidia gt630m graphics card

Does prem pro work with a nvidia gt630m graphics card, i have downloaded from creative cloud but when i try to start the progrm I get a message from windows7 that the program has stopped working and then close s down.
System is I7 processor, 8gb ram,and nvidia gt630m

How to determine your nVidia driver version
Right click in any open area of the Windows desktop
Select NVIDIA Control Panel from the popup window
Select SYSTEM INFORMATION at the lower left corner
Driver version should be the 1st line in Details
I have a GTX285 using driver 296.10 and Win7
What is your driver version number?

Does Airport Express work with a Windows Computer?

Does Airport Express work with a Windows Computer?
I'm trying to setup an older Airport Express to play iTunes
with a Windows Computer. I just want it to join my network,
since I'm already connected to another router.
Thanks,
Paul

Is there a Windows version of the Airport Utility (I think that's what it's called)...
Yes. That is only needed to configure the AirPort Express (AX).
...or do I have to go through Windows setup software?
You may have to do that to get Windows to join the wireless network.

Does The iPhone works in Sweden?

Does The iPhone works in Sweden?
Or is it locked to USA's network?
Can I make calls from the iPhone from Sweden, that's the question...

Yes, you can use it in Sweden on roaming, or anywhere else in the world. It will cost a fair bit though, as carriers charge high prices for using mobile phones abroad. In fact, a substantial amount of their annual profits come from charging roaming customers (a few years ago I seem to recall some operators making a quarter of their annual profits from this relatively small segment of the market).
But you can't swap the SIM for a Swedish one and use a domestic carrier directly.

Does the NavigationController work only when placed in appDelegate?

I am trying to build application that has a tab bar controller with two view and the first view contains a segmented control.
Based on the decision of the segmented control, I load the tableview. The table view has an instance of navigation Controller in which I have assigned the tableview controller as a rootview controller. When I click on any row of the table view, a new controller gets pushed on the table view. In my case, the new view does not show up on the screen, once the row is clicked. I used NSlog and checked that the views pushed on the stack are correct.
I read many threads here and saw that all of them use tabBarController and then it directly uses the navigationController and viewcontroller. Is this the only config that works ?
What if I want to have a tabBarController->tableViewController->NavigationController, isn't it possible? Can anyone please help?

WitchKing wrote:
So, if I understand this fully, I can initialize the navigation controller as soon as the any row is clicked and put the tableView I am on as my rootView for the navController. and also push the next view controller I want to see, on its stack. and present the navigation controller's view.
The usual way to implement a table view drill-down would be to make the first table view (or the content view which includes it) the root view of the nav controller. I.e. the table view's controller would be the root controller. When you do it that way all the objects will do what they were designed to do, and the code to push and pop subsequent views will almost write itself.
However there's no reason you can't do what you described, which (if I understood) would be to attach the nav controller's view to the hierarchy only after a row in the table is selected. Note however, that you couldn't then expect the nav controller to make that first transition from the parent table view. You would have to provide your own transition to the nav controller's view.
You bring up a good point in any case. I never explicitly answered the question in the Subject line of this thread.
does the NavigationController work only when placed in appDelegate?
No, there is no requirement to create a nav controller in any particular position of the view hierarchy. Unlike a tab controller, a nav controller need not be the root of the hierarchy (i.e. added directly to the key window). In fact you'll find several examples in the docs which show one or more nav controllers under some other controller.
there might be some problem with adjusting bar heights and etc though.
I'm not sure you proposed anything that would make it difficult to configure a table view. One nav controller issue that will impact table view position and size is the attempt to hide the nav bar which would otherwise appear above the table. I walked, unsuspecting, into this problem when I tried to help with another, currently ongoing thread that might interest you: [http://discussions.apple.com/message.jspa?messageID=9606805#9606805].
While I'm pasting links, this one is also relevant to your post: [http://discussions.apple.com/message.jspa?messageID=9607946#9607946].
Thank you for the very kind words about my posts. For some reason, this past few weeks I've been spending most of my forum helper time writing about table views and nav controllers. I sure hope I've been dispensing correct information. It's not like I have any knowlege of the internals. These puppies are black boxes to me, so I'm just going by the same docs you have and my own (growing!) collection of test beds.
\- Ray

I've recently added the MacAir to my Microsoft /Windows network. The Mac sees my printers but all the printers are "paused" and I cannot print, even if directly attached. How do I fix this?

I've recently added the MacAir to my Microsoft /Windows network. The Mac sees my printers but all the printers are "paused" and I cannot print, even if directly attached. How do I fix this?

Yes, I've that and it didn't work. Today, I reinstalled printer software on one printer and the "paused" message changed to "offline". It's a three-in-one printer. I turned off and on again and it still says "offline"
"

HT4145 Does the new Airport Extreme allow "guest network" setup across all my Airports on my network? I have 1 Airport as a router and 6 others as WAP's (bridged)

Does the new Airport Extreme allow "guest network" setup across all my Airports on my network? I have 1 Airport as a router and 6 others as WAP's (bridged)

I assume that all of your WAPs are hard wired on the network.
If.....all of your WAPs are simultaneous dual band Apple AirPort devices like an AirPort Extreme or new AirPort Express.....and.....you have firmware version 7.6.3 (now 7.6.4) installed on all the AirPorts.....and.....you use AirPort Utility 6.3.1 to configure the devices......in theory.....it should work.
I don't have 6 WAPs, but I do have 3 and the network works perfectly allowing extension of both the "main" and "guest" network.

How well does the Ipad2 work with the verizon 4g hotspot?

How well does the ipad2 work with the verizon 4g hotspot?

WoW Macbook Pro 2011 15" i7 2.3Ghz quad core AMD 6750 hi-res AG OSX gameplay with FPS and temps
MacBook Pro 17in. Review (Early 2011)
http://www.youtube.com/watch?v=hiEDf_l0PqY

Does the curricula work with or without the SAP software?

Hi! As a faculty member... does the curricula work with or without the SAP software? Is it better to lecture with the software or can I get by without it?
If I'm part of a member university how many students can I provide access to the software? Are there any limitations?
Also, I'm based in Philadelphia with connections to the 2nd largest university... Can I pick my UCC or will it be assigned to me? I'm open to either one!
Many thanks!
Richard

Hi Everyone,
One key intent of this community is to present curriculum resources for lectures of either type - with access to SAP software for the professor and students in classroom and lab environements OR without access to the software.
The former, with SAP software access, requires formal membership in our long-standing University Alliances program (UAP). With this membership, professors receive special access to curriculum elements designed to be dependent on use of SAP software (an of course access to everything in our community).
The latter, without SAP software access, requires simply registration in this new University Alliances community (UAC). This community makes many resources available to professors to integrate into their business and IT-related lectures and projects - including pre-recorded demos, videos, expert and analyst reports, articles, white papers, customer reviews, references, and case studies, etc.
The curren state of the site is like a start-up. There is a lot on offer, but we also expect that there is a lot more out there to grow. We know there are many elements which we can make available to the worldwide community once they are contributed. We are actively approaching professors in our networks now for items.
We would be grateful for anyone that we have not contacted to come forward and offer content of their own, for the UAP members or for the greater UAC.
Thanks and Best Wishes
Bob LoBue

Does the SMPTETTPlugin work with Strobe?

Does the SMPTETTPlugin work with Strobe, or just OSMF?
http://blogs.adobe.com/accessibility/2011/10/new-work-on-closed-captioning.html

**Update**
I gave MAC filtering a try. It worked great without the range extender. However, for the range extender to work, it's MAC address must be setup in the router for access. When I tried to connect to the network on a computer without a registered MAC, and with the range expander on, it let me pass right through.
So, I'm assuming since i was connecting to the router through the range expander, which had a registered MAC, I was able to get access. So wireless MAC filtering was a no go since anybody wanting to connect could do so via the range extender.
For me...WEP/WPA encyption doesn't work. Wireless MAC filtering doesn't work. But what DOES work, is not broadcasting the SSID while not having any wireless security encryption in place. Nobody can wirelessly connect to your network without knowing the SSID, which in a way is more or less like a password. Just remember to change the SSID on both the router and the extender to something that you, or anybody else in the area, has not used in the past.
I hope all this info is helpful to somebody.

How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry. If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

How well does the express work in a 2400 square foot home being on the top floor? us on the bottom floor

How well does the express work in a 2400 square foot home being on the top floor? us on the bottom floor

How well does the express work in a 2400 square foot home being on the top floor? us on the bottom floor
As you might imagine, without knowing a ton of information about the actual construction of the walls and ceiling of your home.....how many walls and other obstructions would be in the signal path of each device.....and the distance between each device and the AirPort Express.....along with how many users would be online at one time or another and what activities they would be involved in......etc., it's really not possible to accurately predict what type of results you might achieve.
The bottom line with any wireless installation is that you really won't know how effectively it will actually perform until you try it.
My opinion would be that you will likely need to add an additonal AirPort Express to "extend" the wireless more effectively to the bottom floor. But again, the same things apply as above.

Transfer Rules: How does the mapping work?

Transfer Rules: How does the mapping work?
Is there a document out there that explains the following or can someone help clarify it for me. I have some confusion on what is really going on.
When I create an InfoSource (IS_Test) as a Flexible update and then Assign DataSource (DS_Test) and I respond Yes, to the message DataSource assignment DS_Test to InfoSource IS_Test Save
a) Under Transfer_Structure/Transfer_Rules in the InfoSource
1) the Transfer Rules tab, what are the fields found in the right column (Assigned InfObjct-field)? And where do the fields you enter in the left column (Communication Str/Transfer rules) eventually go?
2) the DataSource /Trans. Structure tab, can I always assume that all the fields in the right column (DataSource) came from DS_Test? The left column (Transfer Structure), in my test was exactly the same as on the right. Where do these fields eventually go?
b) Under Communication_Struct., in the InfoSource
3. the right column (ISource Fileds) where from those InfoObjects. if I am now creating my InfoSource. Where did they come from?
4. The left column is Communication Structure, which at this point has no InfoObjects, if I move a couple of InfoObjects from the right to the left, where do these Objects in the left eventually go?
5. what is the relationship between the Communication Structure in 4 and 1? Or any relationship between a) and b) as a whole?
Thanks.

Hi Caud,
As Ashish pointed out, communication structure contains fields (infoobjects) that suppose to go to data targets. Which IO in CS to which IO in the data target will go (and what transformation of data may occur) is determined in URs of the data target.
The transfer structure is the structure in which the data is transported from the source system into BW:
http://help.sap.com/saphelp_bw33/helpdata/en/3f/0e503c3c0d563de10000000a114084/frameset.htm
In Transfer_Structure/Transfer_Rules in the IS, DataSource /Trans. Structure tab, right part shows fields in the Datasource, the left part fields in the transfer structure. There is also a transfer structure in R/3 for a given DS. Transfer structure in BW is created identical to the TS in R/3 during TRs activation.
During data load data are transferred 1:1 from TS in R/3 to TS in BW.
TS in BW corresponds to the PSA table structure.
How data from PSA are transferred to the CS is determined in TRs.
The 3rd column (Field) (Transfer Rules tab, right part (Assigned InfObjct-field)), contains field names of the DS (TS); and the 1st column shows IO in the CS to which the DS field will go. So, its a mapping DS filed -> CS field.
The left part (Communication str./Transfer rules) is always identical to the CS content. But the 4th column (Tp) shows possible data transformation during transfer from PSA to CS. If this column contains a yellow triangle then there is no transformation (Value of DS field will go to value of CS field). If there is a red cross, it means that no data for this CS field is supplied from a DS. You can click on this yellow triangle and choose: 1). Another field from a DS; 2). Constant; 3). ABAP routine; 4). Formula. So, here you can determine the data transformation. Moreover, there is a possibility to create a start routine (blank sheet icon at the top).
And finally, here are the answers on your questions:
Q:
a) Under Transfer_Structure/Transfer_Rules in the InfoSource
1) the Transfer Rules tab, what are the fields found in the right column (Assigned InfObjct-field)? And where do the fields you enter in the left column (Communication Str/Transfer rules) eventually go?
A: Right part shows a mapping between DS and CS fields. Left part shows CS fields and data transformation (TRs) during data transfer from TS (PSA) to the CS. These are fields in the CS that will go to data target and which are fed from a TS (DS).
Q: 2) the DataSource /Trans. Structure tab, can I always assume that all the fields in the right column (DataSource) came from DS_Test?
A: Yes, you are right.
Q: The left column (Transfer Structure), in my test was exactly the same as on the right. Where do these fields eventually go?
A: As I described, left and right parts are identical. These fields will go to CS.
Q: b) Under Communication_Struct., in the InfoSource
3. the right column (ISource Fileds) where from those InfoObjects. if I am now creating my InfoSource. Where did they come from?
A: these are fields from an IS template, the name of this template you can see above this right part. Actually, during IS (CS) creation you can choose different templates and choose fields from them transferring them into the left part.
Q: 4. The left column is Communication Structure, which at this point has no InfoObjects, if I move a couple of InfoObjects from the right to the left, where do these Objects in the left eventually go?
A: these are fields of CS (left part) and as I said before they will go to data target.
Q: 5. what is the relationship between the Communication Structure in 4 and 1? Or any relationship between a) and b) as a whole?
A: CS in 4 just shows IOs that will be transferred to data target. CS in 1 also shows how values for CS IOs are to be fed and transformed.
Best regards,
Eugene
Message was edited by: Eugene Khusainov

Does the siri works in the middle east ?

does the sisr works in the middle east and what feauture i can use there ?

Yes, you can use it in Sweden on roaming, or anywhere else in the world. It will cost a fair bit though, as carriers charge high prices for using mobile phones abroad. In fact, a substantial amount of their annual profits come from charging roaming customers (a few years ago I seem to recall some operators making a quarter of their annual profits from this relatively small segment of the market).
But you can't swap the SIM for a Swedish one and use a domestic carrier directly.

Does the pro works in a windows network environment

Similar Messages

Maybe you are looking for