Does the product "Creative Zen Nano Plus" mp3-player supports VBR m

Hi. This is the only questions thats preventing me to buy this player. So can anybody help me with that question?Message Edited by bupa on 08-22-2006 09:48 AM

EVERY mp3 player on the market supports variable bit rates

Similar Messages

My Creative Zen Nano Plus bro

my Creative Zen Nano Plus mp3 player stopped working after i dropped the mechanical part. When I checked it, I didn't see any chip marks or anything, but still it won't work. Can anyone help me? I'll post up pictures if u need me too, and I'll show how it broke.

jumpshot22 wrote:
"I found out the hard way that for it to be able to charge by USB on a computer, the software has to be installed which I think is pretty retarded. You should definitely pick up a charger cause it's a lot faster to charge and more convenient. " -- some guy who reviewed the mp3 player
i cant find where this other guy who said like the same thing
They must have been talking about a different player such as the Zen Micro which does recharge via the USB port.
PB

Faulty Creative Zen Nano Plus Battery Co

Hello. I am new in this forum.
I bought a Creative Zen Nano Plus MP3 Player from the IT show in March this year and 3 months later, the tip of the Battery Cover CRACKS and now the Battery Cover cannot be fixed back to the MP3 Player.
Anyone here has SIMILAR EXPERIENCE with me?
I went down to CREATIVE INTERNATIONAL BUSINESS PARK to buy the Battery Cover but was told it was OUT OF STOCK and I need to wait. Does the CREATIVE MARINA SQUARE has a Customer Care Centre where I can purchase the Battery Cover? Hear from anyone in the forum again. Thanks

Yes, this is quite a common occurence on the Nano, Nano Plus and N200 as the catch is very flimsy. The one on the V200 seems sturdier.
An email to Support in your region should do the trick - in Europe they sent me one straight back in the post.
PB

ITunes not recognizing Creative ZEN Nano Plus

Hello,
My MP3 player is a *Creative ZEN Nano Plus* & I download my Audible.com audio books into iTunes. iTunes says my ZEN Nano Plus is a different Creative product, a *Nomad MuVo*. At the bottom of the screen, it shows me how much space I have left, but does not list files nor give me a way to manage files. Does iTunes need a plug-in or someway to identify my player? Will a future iTunes version handle non-Apple products better?
Many thanks,
shrinkray

iTunes isn't compatible with anything but iPods, so I'm not sure where you got the information that you could use iTunes for your audible account with the Creative player. After looking at the audible website on their list of supported players, it indicates that you would have to use WMP to manage your audible downloads on the Creative. In regards to whether or not iTunes will handle non-Apple products in the future, we are simply fellow users so no one on these boards can really offer an answer. All I can say is that iTunes, since it's inception, has really only been compatible with the numerous kinds of iPods.

Creative zen nano plus

I´ve bought a creative zen nano plus and couldn´t make it work on my Mac. Does anyone knows if there is any restrictions for creative mp3 players to install on Macs? There´s anything I can do?
Thanks

Welcome To  Discussions marianamansur!
As per this page ZEN Nano Plus - 1GB MP3 flash player stores 500 songs and comes available in 10 colors, these are the software requirements.
"Microsoft® Windows® 98SE®/2000/Me/XP (Service Pack 1 or higher)"
ali b

The New Creative Zen Stone plus with built-in spea

?i was thinking of buying the the New Creative Zen Stone plus 2GB?with built-in speaker. http://creative.com/products/mp3/zenstoneplus/?The product detail info claim a 20 hours battery life of this product. . is?this a?true claim ?2. is there any problem about the charging process of this product?because the "previous" Creative?Stone Plus has a charging and?battery life problem. 3. Or should i just settle for the Creative muVo v00 2 GB instead ?Any thoughts guys?Thanks

xmouse,
Here you go:
Firmware for Zen Stone Plus w/ Speaker
You can find any other files you need by going to "Support" and then "Downloads" on this website.
Good luck,
Dale

Creative Zen Nano Plus..cords..warnin

Hello. i just got a Creative Zen Nano Plus and while I was going through the manual that came with it I noticed there was a warning about the cord(s): "WARINING: The cord(s) included with this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproducti've harm. Wash hands after handling. " I'm wondering if Creative has changed the components of these cords. And if so can they be replaced somehow. I don't want to use a cord that may cause cancer or birth defects.

From a previous thread on this:
California law states that notification should be given if a product contains certain amounts of lead. Many types of electrical cords use small amounts of lead to make them more flexible and the USB cord used with many of our products is no different.
I believe a more official source of information regarding the Lead disclaimer, it's origin and purpose, can be found here: http://www.oehha.ca.gov/prop65.html
Cat

Creative Zen Nano Plus audio line-in recor

Im planning to buy Creative Zen Nano Plus GB.
. Does Creative Zen Nano Plus audio line-in recoreder offer excellent quality of sound music when you record a certain music through a CD player's line-in?
2. Please rate the quality of recorded sound music from to 0.
3. Does the recorded sound quality the same as when you just download the music file through your PC's USB connection?
thanks.

Is there something I need to set in the player to allow it to play out of it's line-in function?
You connected the ZNP's headphone out to your car|shelf|portable stereo's line-in, right? The line-in on the ZNP itself is only used to record external audio sources onto the player. The stereos may need to be set to play back from their line-inputs if they don't detect the signal and switch automatically, but that should be explained in the corresponding manuals.

Creative Zen Nano Plus Firmware Upgrade 1.03

Hi everyone,
Just wanted to make you aware of an update that has just been posted on our site.
<TABLE cellSpacing=0 cellPadding=0 width=540 bgColor=#eeeeee border=0>
<TBODY>
<TR vAlign=top>
<TD height=5><FONT color=blue> (<FONT color=#222222 size=><B>.6 MB</B>) </TD>
<TD><FONT color=#222222 size=>2 Sep 05 </TD></TR></TBODY></TABLE>
<TABLE id=Table5 borderColor=#cccccc cellSpacing=0 cellPadding=3 width=540 border=>
<TBODY>
<TR>
<TD colSpan=2><B>Filename: </B><B>ZenNanoPlus_PCFW_LF__03_02.exe</B></TD></TR>
<TR>
<TD colSpan=2> ZENP-FWARE-2-LF
<DIV id=ShortDesc>
This upgrade improves the functionality of your Creative Zen? Nano Plus player. For complete functionality, make sure that you meet the requirements listed below before installing this upgrade.
<DIV id=Features>
<EM>Enhancement:</EM>
Supports Thai unicode character display.
</LI>
<DIV id=Fixes>
<EM>Fix</EM>:
Ensures proper functionality of WMA playback when you move forward or backward within a track.
Improves Shuffle mode randomization when you play back a large number of MP3 tracks.</LI>
<DIV id=Notes>
<EM>Requirements:</EM>
Microsoft Windows XP, Windows 2000, Windows Millennium Edition or Windows 98 Second Edition (SE)
Available USB port (version . or higher)
Creative Zen Nano Plus player
For Windows 98 SE only: Creative Mass Storage drivers .05.0.250 or later, available from the Installation CD or the Internet</LI>
<EM>Notes:</EM>
This firmware upgrade only works with Creative Zen Nano Plus players. Do not install this upgrade for other players.
You will lose all content in your player when you install the firmware. Back up any audio or data files in your player to your computer before upgrading the firmware.
To install this firmware upgrade, do the following:
Download the ZenNanoPlus_PCFW_LF__03_02.exe file into your local hard disk.
Connect your player to your computer.
Double-click the firmware upgrade file.
When prompted to set your player in Recovery mode, disconnect your player from your computer.
Press and hold the Play button while connecting your player to your computer's USB port.
Continue to hold the Play button for about 0 seconds after connecting your player to your computer.
Release the Play button when the Find New Hardware dialog box appears on the computer screen.
Follow the instructions on the screen to install recovery drivers for your player.
Double-click the firmware upgrade file and follow the instructions on the screen.</LI>
</LI>
</TD></TR></TBODY></TABLE>

I went ahead and updated it anyway. One little thing I noticed was now the volume only goes up to 25 like my Zen Touch instead of 40 or whatever that it did before. Same loudness, different numbers only. Other than that, I have not noticed anything different, but it seemed to work OK scrolling through a song with the old firmware. I did not, obviously, do a detailed comparison.

Creative Zen Nano Plus won't turn on!!!!Please h

For some reason, my 256MB Creative Zen Nano Plus that I've only had for three months has suddenly failed to turn on. I have changed the battery several times so I know it isnt that, but when?I press the power button, the 'creative' logo comes up for about 2 seconds with the blue backlight before switching itself off. When I plug my player in my creative media organiser on my computer through the USB though, it connects absolutely fine and I can upload my media files, its just literally turning it on that is such a problem. I can't explain why its doing this, the only thing I'm thinking of is that it was in my handbag for about 6 weeks without being touched so I'm not sure if something in my bag could've damaged it's But I'm worried because I'm not sure if my player is under warranty as?I don't have the warranty sticker on the back of, only a number and a bar code?Can anyone possibly help as I've been everywhere to try and get it fixed but no one knows whats wrong!?Thank you?Laura.

Can you still connect your player to your PC? If so then you can reload the firmware. Go to the Support, Downloads page for the Nano Plus and download the firmware from there. Make sure you click on the Show Details link as that explains how to carry out the reload.
PB

Creative Zen Nano Plus Media Explorer only works for administra

Creative Zen Nano Plus Media Explorer only works for the administrator account; for other users the message "The Zen Nano Plus is not connected. Please connect your Zen Nano Plus to the computer." is displayed, but it *is* connected and works under other programs.
Version is .0.03.
Thanks for any assistance.
Edit: System is XPMessage Edited by zigkill on 0--2006 06:23 AM

RMskater wrote:I think you need to change the permissions to "Everyone".
How exactly do you do this? I checked this out tonight - when I logged onto my PC using my son's Limited User account (XP Home, BTW) I could connect his N200 and see it in Device Manager and Windows Explorer but both Creative pieces of software (CMS and N200 Media Explorer) did not see that it was there!
I tried setting the Run As... properties for the CTMS.exe file to run as one of the Admin user accounts but kept getting an error about being unable to find a specific file (which is in the Media Explorer folder!). When I went back to using the current user the error stopped. Perhaps I need to set the Run As.. options on that file as well?
As we don't use DRM'd music this isn't going to be a problem but it would be good to find out the cause of this once and for all.
I'm going to see if WMP0 has problems as well or if it's just the Creative ap
ps.
PB

Is creative zen nano plus scratch-resistant coati

?Is creative zen nano plus (color black)?has a?scratch-resistant coating on it like the creative zen v?

I assume that it is/was brand new in an unopened package. If that is the case-take it back. For that matter return it anyway. The Nano Plus doe snot work this way. The 'scroll wheel' is both rotate and press-in. The instruction are pretty good at explaining it. Not having a working display is not good at all.

Creative Zen Nano Plus 1GB - Black parts

Hi everyone, I would like to enquire if anyone know where to get Creative Zen Nano Plus GB shell, mine got quite badly damaged but the electronics are in perfect condition. So I'd like to get just the shell and the battery cover, plus maybe the buttons too. Thanks.

RobertM wrote:
Hi everyone, I would like to enquire if anyone know where to get Creative Zen Nano Plus GB shell, mine got quite badly damaged but the electronics are in perfect condition. So I'd like to get just the shell and the battery cover, plus maybe the buttons too. Thanks.
Ebay is a good source for such items. http://electronics.shop.ebay.com/iPo...=p3286.c0.m282

Problem with Creative Zen Nano Plus 1 GB mp3 player please r

I bought zen nano plus? month ago and while i was transfering music into it it crashed ,? it looked like its no more readable so i disconected it from my pc , it needed format , i did format and tried to transfer some music again but the same problem appeared . I thought the memory card of the player is damaged and needs to be changed or repaired? , i gave it to customer support and after a few days they said they installed newer software version to the player , well i thought it will fix the problem . Once i got home i tried to transfer music and it crashed again , i couldnt even format it cause when i plug in the mp3 F: ( usb dri've ) does not respond. I gave the mp3 to customer support again , they filled up the mp3 with music six times and everything worked fine. But at home it still crashes while transfering , so i dont know what to think . On the packet where the mp3 was when i bought is written WORKS WITH WINDOWS VISTA ,?currently i have windows xp ,? can it be that i can only transfer music without prloblems with windows vista ? can it be that zen nano plus is created to use with windows vista ? Thanks for reading !

Did you install the driver on your PC? If not, then do it. Try reformatting the player as FAT. Next try tranferring a few folders full of mp3 files. Use windows explorer to drag and drop the folders? with files to the player. Now see if the player will play them.

Downloading a book on CD to my Zen Nano Plus mp3 pla

Does anyone know the best way to download a cd book to my Zen Nano plus Player?
thanks
pejid

I have a MuVo TX FM for audio books, but I imagine the procedure would be the same for your Zen Nano.
There may be faster/easier ways, but this is what I do:
I use the "Free CD Ripper" (http://koyotstar.free.fr) to rip the CDs to MP3 files on my computer. Each disk's files are stored in a separate folder. I use the book name and disk number for the album name (e.g. Book Title 0). Go to the configuration screen to set the file name to be Album - Track (%A - %N). I find ripping at 48Kbps is sufficient for my ear and it saves space. After that, I can just copy the folders to my player and listen. On my player everything is played in alphabetical order, so the above naming scheme works quite well.
As an improvement, you can use MP3 Book Helper (http://mp3bookhelper.sourceforge.net/) to rename the tracks from "Track 0" to include the book name, disk number and track: "Hobbit 0-05". On my player there is about 6 characters of space available for displaying the track name while playing and it is nice to easily see where you are in the book.
Finally, note that some Creative players have a 40 folder and 500 file limit on what they can detect/play. So you need to be careful not to overfill your player. It won't hurt it, but some files and folders won't be playable. To fully use the space available, you could use an MP3 Joiner to combine the files together in order to stay under the limit. At this point I haven't bothered with this step since I can still store two books without exceeding the limit.
Good luck,
Doug

Does the product "Creative Zen Nano Plus" mp3-player supports VBR m

Similar Messages

Maybe you are looking for